Hello there, I have a Multilaser M8 and it has a ROCKCHIP 3066 processor. I've already lost one M8 because of a faulty firmware available on their website. It apparently has no recovery mode as I couldn't manage to get it to boot, the only thing that it shows is the android logo with a exclamation mark. I know that there's a way to get past this window on some devices, but mine doesn't have the + and - volume buttons and I've tried touching the window on the corners and pressing the available buttons with different combinations but none of them worked. I've also spent a lot of time searching for something on Google, but found only frustrated people who where also a victim from that firmware. As my hands itch to change something on my tablet, I had to do something to make it safe as I have no methods of recovering my device if I manage to brick it. So, I managed to dump my rom using the romdump method wich consists in dumping the rom using the terminal emulator. The files that I've got from this dumping are: boot.img, checksum.md5, config.gz, recovery.img, system.info.gz and system.tar. The firmware available on the website is a .img file that must be flashed using RkBatchTool. So, what I want to know Is if with those files I can manage to restore my system so I'll have no worries if I get bootlops while trying to mod my tablet. The first thing that I would like to do is to manually install CWM, but I believe that it's very risky and I must be sure that I'll have a backup from the system to rely on. I'm sorry about my English and thanks in advance!
Update: I've successfully installed CWM on this device and I'm able to use it with my usb keyboard.
bump
how?
Hi!
How you did it?
Olá, como você conseguiu instalar?
Wo11ven said:
Hello there, I have a Multilaser M8 and it has a ROCKCHIP 3066 processor. I've already lost one M8 because of a faulty firmware available on their website. It apparently has no recovery mode as I couldn't manage to get it to boot, the only thing that it shows is the android logo with a exclamation mark. I know that there's a way to get past this window on some devices, but mine doesn't have the + and - volume buttons and I've tried touching the window on the corners and pressing the available buttons with different combinations but none of them worked. I've also spent a lot of time searching for something on Google, but found only frustrated people who where also a victim from that firmware. As my hands itch to change something on my tablet, I had to do something to make it safe as I have no methods of recovering my device if I manage to brick it. So, I managed to dump my rom using the romdump method wich consists in dumping the rom using the terminal emulator. The files that I've got from this dumping are: boot.img, checksum.md5, config.gz, recovery.img, system.info.gz and system.tar. The firmware available on the website is a .img file that must be flashed using RkBatchTool. So, what I want to know Is if with those files I can manage to restore my system so I'll have no worries if I get bootlops while trying to mod my tablet. The first thing that I would like to do is to manually install CWM, but I believe that it's very risky and I must be sure that I'll have a backup from the system to rely on. I'm sorry about my English and thanks in advance!
Update: I've successfully installed CWM on this device and I'm able to use it with my usb keyboard.
Click to expand...
Click to collapse
Sal all,
I cannot find firmware for this tablet. It's a 7inch, dual camera, atm7029 quad core cpu, that doesn't start, but i can write firmware with Actions Pad Product Tool.
The only available firmwares for this type of cpu (atm7029) i was able to find, were from Ainol tablets, but these are not good.(only lights start 1sec)
Can someone help ?
10x in advance !
Hi! There is a similar device firmware from (Russian): (yadi.sk/d/Wku6HWTxKkaKa)
But WiFi and camera other.
System image
Here is the image of the system partition. Dumped with ADB from a working tablet. (512MB)
(mediafire.com/download/roc8870rirvt3hw/actc_system.img)
And this is the image of the recovery partition: (48MB)
(mediafire.com/download/fd30kaio8xb490j/acta_recovery.img)
If you want to see what's inside the images, mount the image in Linux, or use Linux Reader if you're using Windows.
How to use the actc_system.img and acta_recovery.img
Hi, I'm an android newbie needing help. I found this thread while searching for how to deal with a bootlooping Orion TAB-700qc tablet belonging to a friend.
Apparently my friend tried to update the tablet with the wrong update (I'm not really sure what he did), but it went into a bootloop -- it will not get past the "android" screen. I found how to go into the Recovery menu but nothing there would fix the problem. I have downloaded the actc_system.img and acta_recovery.img discussed in this thread, but I need step-by-step instructions for how to use them to get the tablet working again.
Can someone please direct me to instructions that I as a newbie will understand? I have worked a lot with pc's but I have almost no experience with androids.
Thanks,
cmNhu
Welcome to my tutorial !
You can find others tutorials related to the Cube i6 :
Install windows 10
Install Android 4.4.4 (Stock & RemixOS)
I received the magnificent AllDoCube i6 Air 3G last week, and i've been struggling since to get updates,
firmware flashing and all of that working, I searched the whole web and the drivers/Firmwares are nowhere to find,
but on some chinese proxy-needed sites sometimes, or baidu which is a pain in the a** to download from.
So I decided to share the ways to update this tablet at all costs (heh, no worries, -NORMALLY- it wont brick)
Disclamer: This process might contain ROM hacking, this is for advanced users.
THIS TUTORIAL HAS BEEN TESTED ON i632GB1537XXXXXXX MODEL, AND WORKS ON IT,
WHEREAS IT HAS BEEN REPORTED THAT i632GB1522XXXXXXX MODEL BRICKED UPON DOING IT,
SO PLASE DO IT CAREFULLY, IF THE INSTALL VERSION IS 202 YOU SHOULD THINK ABOUT IT BEFORE TRIYING AS IT COULD BRICK!
Software included may be subject to copyright.
Flash your device at your own risk. Developer is not responsible for what you do on your device.
What you need:
Cube i6 Air (3G or Wifi)
Flash Drive (256Mo +)
OTG cable
USB Hub (3 Ports recommended)
EFI BIOS Firmware
DOWNLOAD THE FIRMWARE BEFORE STARTING SO EVERYTHING IS AVAILABLE WHEN YOU DO IT
https://drive.google.com/folderview?id=0B8YPw4HjmqNCZktOZy1OTEN2ZVE&usp=sharing
Get on the drive, go to your device folder, select the wanted version inside BIOS folder
What to do :
1.) Start by plugging the usb drive into your computer, and format it to FAT32 using any formatting tool
2.) Now you need to uncompress the downloaded firmware :
you will find a "Firmware_X.X.X" folder inside, take all of its content, and extract it to your freshly formatted drive.
here's what looks like the root of your usb:
3.) Your USB Drive is ready, now just plug the OTG cable to your tablet, plug your HUB onto that OTG
and fill it with your keyboard and the USB Drive just created.
4.) Press power button until you see the screen backlight, when you see it repeatidely smash "Esc" key on the connected keyboard.
You will see the bios 6 square configuration screen.
Hit "Boot Manager" and select your USB in the list.
5.) The tablet should now boot from your USB, booting to a UEFI Shell. Depending on your device, it might be either 64 or IA32.
Now you just let startup.nsh script do the firmware flashing init, it should drive you to a flashing BIOS screen.
6.) Follow instructions on screen and let the tool flash your BIOS automatically.
Once done, the tablet will shut down.
Congrats! You successfully updated your BIOS !
It is my first tutorial, i will post some photos of steps in the future so come back, the guide will be better soon !
Regards,
Max.
Hi,
I have bought the Cube i6 Air 3G a week ago and i'm still waiting for it to arrive.
Have you update the win 8.1 to win 10?
Does everything works correctly?
Regards
re
Hi, I successfully updated the BIOS as of now,
I changed the bootloader animation to nexus one on Cube ROM.
I also manager to boot on Android x86 but it had too many drivers issues.
Still, 4.4.4 stock cube is working and i reflashed to a new partition scheme of 9Go
and i'm currently testing some win10 pen drives for install, will keep you updated.
Édit: oh you were asking about thé tablet? Weil jack has default, charging takes hours, glass is plastic, firmware is pain but hell this is a goodamn good tablet for its price !
regards,
Max
stalker2106 said:
i'm currently testing some win10 pen drives for install, will keep you updated.
Click to expand...
Click to collapse
I achieved installing Win10 x32 Pro on Cube i6 Through hacking WinPE installation environnement, but now i'm struggling finding the drivers. touchscreen, battery and vital things like hd graphics are not working as of now. Will post a tutorial on how to install Win10 in given time when i'll get out of this mess!
My tablet has arrived yesterday.
From what the little i've used it, it has good performance especially in android.
A lot faster compared to my last android tablet (Cube U39GT).
Something i didn't like was the size of the icons and text in android, my next step is to root and change the dpi.
Regarding windows 10, i found in a chinese tablets blog with win 8 and 10 drivers.
I haven't tested it, but as soon as i find it again, i will let you know where to download them from.
You haven't tried the normal win 10 upgrade? From the microsoft icon?
gtbr said:
My tablet has arrived yesterday.
From what the little i've used it, it has good performance especially in android.
A lot faster compared to my last android tablet (Cube U39GT).
Something i didn't like was the size of the icons and text in android, my next step is to root and change the dpi.
Regarding windows 10, i found in a chinese tablets blog with win 8 and 10 drivers.
I haven't tested it, but as soon as i find it again, i will let you know where to download them from.
You haven't tried the normal win 10 upgrade? From the microsoft icon?
Click to expand...
Click to collapse
I did not try anything as i like "stock" versions of my windows, but tonight i got it working all the way !
My cube i6 is running perfectly windows 10 and oh my god what a paradise it is ! The tablet experience got way better onto that version.
Can you try to update from the icon you are talking about ? i'd be curious if it works. anyway, i'm currently writing+uploading for the win10
tutorial for this tablet, so you'll be able to flash it late tonight, or tomorrow.
EDIT: The dpi is correct in android, only the status bar icons and some other are not in correct dpi but that is KitKat issue I guess. still interested in resolving that though. I'm currently hacking android lollipop ROM also, i'll keep you tuned on that. For rooting, i used KingRoot, it worked, but after a reboot, it tells me "root" is wrecked, so i guess there is some investigation to do there, but I was mainly focused on getting windows 10 ENGLISH STOCK version running to share it with you guys.
EDIT2: Still uploading, but tutorial is here: http://forum.xda-developers.com/android/help/guide-how-to-install-windows-10-t3252042 and it should work on any Z37xx powered device. Enjoy !
Hello,
I'm using this tablet from 2 days now. great !
But, i got wifi problem after sleep : wifi chip cut and never found network anymore.
has to reboot, and all goes right.
same in win and android.
Did you hear about this ? many poeple complain about this.
Any trick or advice ? Is this bios correct this ? Is your bios work on i6 3g dual-boot ? (there is 2 bios for dual boot ?...)
Thanks !
Hi,
I've also have the same problem with the wifi.
I usualy disconnect the wifi and reconnect it, but sometimes it doesnt work and have to reboot the tablet.
I've not noticed it in windows but maybe it's because i'm using the tablet a lot more in android.
I've tryed to update to win 10 using the microsoft icon, but i got an error and was unable to complete the upgrade.
gtbr said:
Hi,
I've also have the same problem with the wifi.
I usualy disconnect the wifi and reconnect it, but sometimes it doesnt work and have to reboot the tablet.
I've not noticed it in windows but maybe it's because i'm using the tablet a lot more in android.
I've tryed to update to win 10 using the microsoft icon, but i got an error and was unable to complete the upgrade.
Click to expand...
Click to collapse
Hello, i have such a tablet for now about 6 Months and it is awesome so far (i often use win8.1).
My Tablet has also DUAL Boot with Android 4 and win 8.1 Bing.
I tried to upgrade to win10 but i also got a message that the partition can not be resized by windows. So i cant upgrade to win 10 with the normal tool from microsoft.
Is there any Solution yet to get this to work?
Anyway, i tried to boot from usb (win8.1 / ubuntu / gparted) but it is not working at all. When i try to boot true windows Advanced Boot Options, the BIOS says that there is no USB device.
When i use the EFI Shell to mount the USB Stick i can see that the BIOS has recognized the USB Stick.
I think that is all very strange, but i will try to update the BIOS soon. The serialnumber is not the same as from @stalker2106 but i will try it.
I hope there is a way to get win 10 working, but Ubuntu would be even better for performance.
Greetings from Germany.
tysonpower said:
Hello, i have such a tablet for now about 6 Months and it is awesome so far (i often use win8.1).
My Tablet has also DUAL Boot with Android 4 and win 8.1 Bing.
I tried to upgrade to win10 but i also got a message that the partition can not be resized by windows. So i cant upgrade to win 10 with the normal tool from microsoft.
Is there any Solution yet to get this to work?
Anyway, i tried to boot from usb (win8.1 / ubuntu / gparted) but it is not working at all. When i try to boot true windows Advanced Boot Options, the BIOS says that there is no USB device.
When i use the EFI Shell to mount the USB Stick i can see that the BIOS has recognized the USB Stick.
I think that is all very strange, but i will try to update the BIOS soon. The serialnumber is not the same as from @stalker2106 but i will try it.
I hope there is a way to get win 10 working, but Ubuntu would be even better for performance.
Greetings from Germany.
Click to expand...
Click to collapse
Check windows 10 Post, there is no need to update BIOS to fix this error, your USB has to be in GPT partition style, check answer on the other thread
But usually the bios update should work, as it did on my tablet. But why bother taking risk if you can get it working without it
Hi,
I have sucessfully updated to win10
I have bios 203 in my cube and serial i632gb1510xxxxxxxxxxx, does anybody have tried to update to 206 on such setup ?
What are the chances that I will brick my device ?
I have downloaded latest Cube i6 roms from cube site (may 2015) . There are two bios-es which have to be installed in chronological order.
Shall I do it first, and then try to update to 206 ?
Edit: I was not patient and tried it on my own.I have successfully updated bios and tablet has started to both android and windows
I will perform some functional tests afterwards.
Actual steps :
I have first downgraded bios to 201(provided here )
Flashed bios1 from link provided
Flashed bios2 from link provided
Flashed bios 206 from guide in first post
Edit2:
I have tested basic functionalities like : Gyro-sensors, WIFI, GPS, 3G network and yet everything works like charm.
Maybe a placebo, however I have the feel that android runs like two times faster
I do suggest to update the windows, however I take no responsibility if you will brick your device. Even if the setup is like mine, neither if it differs
Regards
Why do you first downgrade to 201?
What do you mean with bios1 and bios2?
Many thanks and question
Hello Stalker,
I am new here and i want to
thank you for the instructions!
I bought a cube i6 from china.
It is the 'i6 air remix',
So it should have only Android on it.
When it arrived. it didn't function.
The only think that happens is booting to theEFI-shell.
I could switch between Android and Windows in the boot settings.
But Android did not boot.
I have updated the bios with your instructions
now firmware 2.0.6 is installed.
But still i can not boot Android.
I found a few flash tools and android for the cube i6 .
But i don’t know what is the right version flash tool I have to use.
Maybe you have advise or the right android and flash tool in your google drive download area?
Kind regards and many thanks in advance.
jan-netherlands said:
Hello Stalker,
I am new here and i want to
thank you for the instructions!
I bought a cube i6 from china.
It is the 'i6 air remix',
So it should have only Android on it.
When it arrived. it didn't function.
The only think that happens is booting to theEFI-shell.
I could switch between Android and Windows in the boot settings.
But Android did not boot.
I have updated the bios with your instructions
now firmware 2.0.6 is installed.
But still i can not boot Android.
I found a few flash tools and android for the cube i6 .
But i don’t know what is the right version flash tool I have to use.
Maybe you have advise or the right android and flash tool in your google drive download area?
Kind regards and many thanks in advance.
Click to expand...
Click to collapse
The truth is, the 206 BIOS provided is hacked off i6 remix repository from cube, so i guess there is no big deal flashing it on your device as it works on regular i6.
Moreover, you can use any version of the flash tool as long as you flash a correct rom for your device, which i would suggest to download from official cube repository or geekbuying or so.
Android Geecbuying
Hello Stalker,
Ok. Thank you!
I will try Geecbuying.
Hopefully the windows drivers will function.
There isn't a way to flash from USB I suppose?
Greetings
Hi, well, actually, you should flash over USB with à windows computer. MFT by Intel is recommended. I shall make some tutorial about Android installation and partition resizing.
flash and resize partitions
That is super. When you want to do so.
I was indeed wondering or there would be one android partition on the tablet or two partitions (one for android, one for windows).
I also questioned myself how to see that there are partitions.
In earlier times when I was working with a pc, i use F-disk or partition-magic for this kind of work.
But on the tablet I do not have a clue...
So if you could make me wiser on this, I would be very thankful.
Maybe you could boot on some gparted liveusb? Or inside efi shell some commands could help
bluefish007 said:
Why do you first downgrade to 201?
What do you mean with bios1 and bios2?
Click to expand...
Click to collapse
no particular reason, I just wanted to know, which version of bios is in the latest firmware provided by geekbuying
Additional condition in my decision mechanism was that my serial did not match mentioned ones in w10 thread from stalker, so somehow I have used sleepy sloopy logic and tried to minimalize the risk (I know it have no rational reason and logic behind it at all)
Therefore, I tried the ones from geekbuying repository, to be sure to have latest provided from "official source".
greetings
thermoska said:
no particular reason, I just wanted to know, which version of bios is in the latest firmware provided by geekbuying
Additional condition in my decision mechanism was that my serial did not match mentioned ones in w10 thread from stalker, so somehow I have used sleepy sloopy logic and tried to minimalize the risk (I know it have no rational reason and logic behind it at all)
Therefore, I tried the ones from geekbuying repository, to be sure to have latest provided from "official source".
greetings
Click to expand...
Click to collapse
Ok thanks for the answer! So i can upgrade from 203 at 206 at one part or what do you think?
Hi everyone,
A couple of days I posted in XDA Assist and was asked to seek help here. Therefore, I'm posting my original post here, along with some updates at the end.
Original Post:
#####################
I've got a reasonably unknown Tablet PC.. Here are the specs and miscellaneous information;
Name: Ainol Numy 3G P97
Internal Memory: 16GB
RAM: 1GB
GPU: Mali-400 MP
SoC: MediaTek MT8382 ARM Cortex A7 @ 1.3Ghz (Quad Core)
OS: Android Jellybean 4.2.2 (I'm pretty sure it's a Custom ROM)
Kernel Version: 3.4.5
Build Number: Numy_3G_P97_V1_2014090215
Custom Build Version: 1.19_20140822
Root Access: No (I never tried to root the device, never had a reason to do so)
I've been searching around for ways to upgrade the OS from Jellybean to Lollipop or higher. I've searched extensively within XDA Developers' various forums, but there doesn't seem to be any post in relation with my device.
I took to the internet and found some websites offering Flash Tools, Firmware (nothing above KitKat, or so it seems) and Android Studio. I've tried (in vain) to go through some tutorials on YouTube, but haven't come across anyone who's done anything with this particular device.
However, I have a rough idea rattling around in my head of what needs to be done, but I just need guidance from the Developers here to tell me how to get about doing it.
I have the following software downloaded;
1. MediaTek USB Drivers and Flash tools
2. SP Flash Tool v5.1620
3. Official Android Jellybean 4.2.2 System Image for the device
4. Android Lollipop 5.0 System Image (the site I downloaded it from says the Firmware is for a different tablet pc, but with the same specs as my device)
5. Android Studio (latest version, direct download from Google) - I read in some sites that Android Studio would help a lot to install a Custom ROM into any Android device, hence the download.
I'd greatly appreciate anyone helping me out in this endeavor. I'd like to install Lollipop (at least) on my Tablet PC, in order to gain some functionality as well as improved performance (hopefully!), as the current Jellybean OS is terribly laggy. I've seen other Tablet PC's with lesser specs running Lollipop smoothly, so I'm hopeful that there might be a silver lining to an otherwise very dark and sinister looking thunderstorm.
#####################
End Post
Updates:
While waiting, I've tried a few things. I downloaded the following;
1. Android SDK Tools with Platform Tools
2. Android Lollipop system images x 2 (.img file format) (similar specs to my Tablet PC)
3. Android Lollipop system image x 1 (.zip file format) (similar specs to my Tablet PC)
4. Android KitKat system image x 1 (supposedly the original and official KitKat OS for my Tablet PC)
5. Kingo Root app (Windows version)
Here's what I tried:
I tried using ADB to sideload a Lollipop system image (.zip file format) through a custom recovery already installed on my Tablet PC. Each time I tried, the installation would just stop with "Installation aborted". No matter what I did, I couldn't get it to work.
Next, I tried to "update" the current OS (Jellybean 4.2.2) to KitKat using the "official update" I found on the net, for my Tablet PC. I used SP Flash Tools to try and load the file, but that didn't pan out, as there was something corrupted in the Scatter file. Each time I tried to load the Scatter file, I'd get the error message that it was corrupted. Didn't know what else to do.
Following that, I read some articles where rooting the device in question was suggested, so I searched around for a bit, found the Kingo Root app, used it and rooted my device. Then, I tried using ADB again, this time using a more traditional method of custom ROM installation. But once I got to the Fastboot commands, I couldn't get any further. My device did boot up in Fastboot mode, but I got lost after that.
As of yet, my device is still running Jellybean 4.2.2. I've refurbished it by doing a master reset, but I'd really like to get Lollipop in, if it's possible. Any help would be much appreciated.
Thanks!
Serious help needed please!
I really need help, people, on this issue! Isn't there some kind soul who will respond??
Hello, I used the tablet for one day, then the touch screen in windows partition stopped working and randomly lock screen appears. In android partition touch works fine but lock screen appears. I tried to reset but I didn't resolve. I couldn't find useful drivers, help please. Thanks
problem with touch in windows? simple solutin: use LINUX
Hey dude... try to connect OTG with usb mouse and then go and update windows drivers... this might help..:good:
Hi Guys,
I´m searching for the drivers too. Did anybody know where I can find the correct drivers?
Thanks
toto1988
Try to download the file from the link below
https://drive.google.com/drive/u/0/folders/0B7-zsgO0i8kZVXF1YWszMWlpWkk
I also have the same issue.
Android works well but Windows touchscreen issue.
After installing this driver, my windows touchscreen works normally again.
Link is copied from their official website
donlimck said:
Try to download the file from the link below
I also have the same issue.
Android works well but Windows touchscreen issue.
After installing this driver, my windows touchscreen works normally again.
Link is copied from their official website
Click to expand...
Click to collapse
WORKS!!!!
Thanks!!
Please hellp!!
How to boot into android recovery mode of obook 20 plus. I tried pressing the power and volume buttons together further... If boot menu of windows side is there please tell me
Thanks
donlimck said:
Try to download the file from the link below
I also have the same issue.
Android works well but Windows touchscreen issue.
After installing this driver, my windows touchscreen works normally again.
Link is copied from their official website
Click to expand...
Click to collapse
Ooh thank you very much, half my hair is pulled out. Couldn't figure this **** out.
Help.... accidentally formated the drive of android through disk management
---------- Post added at 08:39 AM ---------- Previous post was at 08:39 AM ----------
Don't know how to flash back original one
Also have a ONDA oBook 20 Plus tablet, tried to install LInux Kali, and screwed the partitions. Still have acces to bios by hitting scape. Any help to unbrick this chinese knock out.
ROOM, ROOT, TWRP, REMIX, obook 20 plus
Hi Tony..
Its been couple years since I abandon onda forum project..
Back in days I've been one of the few that been hunting in Chinese websites trough translator to find anything for onda obook 20 plus.. Firmwares, root tutorial and other useful info.. All what I've find, I post on the onda forum. When I got notify about your post I've dig back into Gmail to find a link for my guides that I've translated and tested as working. Sadly the forum doesn't existing any longer.
Good for you is that I had some data stored in my Google drive
Here link for some android 5:
https://drive.google.com/file/d/0B7-zsgO0i8kZZlhQRVBQbDFSeU0/view?usp=drivesdk
If your partition are screwed up, I will start with gparted live and investigate what happen.
I remember my headache when I brick it for a first time... I was left with tablet that turn to black screen. I've put a android onto a USB led drive and boot it. Luckily a fastboot pop up for me and I was half way winner.
Update:
I find the second folder with the obook 20 recovery. There few rooms,, the only one TWRP custom recovery and also android remix 2.0 :
https://drive.google.com/folderview?id=0B7bzuJLiWwaHLWlVcTJSZGxTV2M
There is also a oldboot and boot image. Those are for flashing TWRP, the fastboot will not let to flash TWRP, you need to first flash the modified boot.img and then boot TWRP.
Be aware I noticed that after flashing the modified boot image the tablet randomly been snapping a photos during boot up and been pain in arse.
If no need to root it don't mess around with it like I did with mine.
I no longer have the crappy obook so Good luck.. If need any more tips, hit me up.
[email protected] said:
ROOM, ROOT, TWRP, REMIX, obook 20 plus
Hi Tony..
Its been couple years since I abandon onda forum project..
Back in days I've been one of the few that been hunting in Chinese websites trough translator to find anything for onda obook 20 plus.. Firmwares, root tutorial and other useful info.. All what I've find, I post on the onda forum. When I got notify about your post I've dig back into Gmail to find a link for my guides that I've translated and tested as working. Sadly the forum doesn't existing any longer.
Good for you is that I had some data stored in my Google drive
Here link for some android 5:
https://drive.google.com/file/d/0B7-zsgO0i8kZZlhQRVBQbDFSeU0/view?usp=drivesdk
If your partition are screwed up, I will start with gparted live and investigate what happen.
I remember my headache when I brick it for a first time... I was left with tablet that turn to black screen. I've put a android onto a USB led drive and boot it. Luckily a fastboot pop up for me and I was half way winner.
Update:
I find the second folder with the obook 20 recovery. There few rooms,, the only one TWRP custom recovery and also android remix 2.0 :
https://drive.google.com/folderview?id=0B7bzuJLiWwaHLWlVcTJSZGxTV2M
There is also a oldboot and boot image. Those are for flashing TWRP, the fastboot will not let to flash TWRP, you need to first flash the modified boot.img and then boot TWRP.
Be aware I noticed that after flashing the modified boot image the tablet randomly been snapping a photos during boot up and been pain in arse.
If no need to root it don't mess around with it like I did with mine.
I no longer have the crappy obook so Good luck.. If need any more tips, hit me up.
Click to expand...
Click to collapse
Have you had problems with the touchscreen on Windows 10? After reinstall Windows, my touchscreen don't work very well.
donlimck said:
Try to download the file from the link below
https://drive.google.com/drive/u/0/folders/0B7-zsgO0i8kZVXF1YWszMWlpWkk
I also have the same issue.
Android works well but Windows touchscreen issue.
After installing this driver, my windows touchscreen works normally again.
Link is copied from their official website
Click to expand...
Click to collapse
Hello, sorry to reply to an old topic, but I can't download the file from Google Drive you linked.
Can you please reupload or reshare, please? Tried to download from the ONDA website but I don't understand Chinese nor have a baidu account.
Alpha120 said:
Hello, sorry to reply to an old topic, but I can't download the file from Google Drive you linked.
Can you please reupload or reshare, please? Tried to download from the ONDA website but I don't understand Chinese nor have a baidu account.
Click to expand...
Click to collapse
Onda - Google Drive
drive.google.com