Related
Hi,
My Samsung Galaxy Gio (S5660) is unable to connect to any computer (already tried on 4, all with kies, other cables, etc). It always says unrecognized device, even on downloading mode. It is on stock gingerbread, but it was on CM 7.2, i remember i flashed a ext4formatter.zip on the procedure, does it has anything to do with?
Any ideas?
Sent from my Xperia X10 using XDA
Do you have USB Debugging enabled? Also allow Unknown resources?
Yes, already tried with them on or off, nothing seems to be working..
Sent from my Xperia X10 using XDA
Did you check to make sure the drivers are installed?
TEAM MiK
MikROMs Since 3/13/11
Yes, I even reinstalled them via Kies, and even installed Samsung USB Driver for Mobile Phones, etc..
Try Unistalling, then reinstalling the drivers.
TEAM MiK
MikROMs Since 3/13/11
Anything related to software (PC) was already done. As I said, tried on 4 computers, all with the same error. Kies and drivers already full uninstalled/installed. XP/Seven.
In my opinion it seems to be about the phone. Even when trying to install a official update from samsung the installation fails with a 0x80010093 error code.
Doesn't ext4/rts have nothing to do with this?
Regards
I would try flashing a different Rom. See if the issue persists.
TEAM MiK
MikROMs Since 3/13/11
The thing is that for flashing the roms provided here is by ODiN, and as I cant connect it, I cant flash it
Flashed CM7.2 via CMW and still no sucess. Tried to mount USB Storage on CWM and the same happens...
Same problem here, on my SGS1 I9000.
I tried every solution found on this forum but nothing worked.
If you find a way to work, write it please
Well till it gets resolved you can try using Wireless adb. There are also several Wireless file transfer apps. When I get home I'll link a few
TEAM MiK
MikROMs Since 3/13/11
Thanks I'll be waiting
Well here's a few for you. I've used these so I know they work. There are more I'm sure. Links are below . First one is Wireless ADB.
https://play.google.com/store/apps/details?id=nl.morose.wirelessadb&hl=en
https://play.google.com/store/apps/details?id=com.sand.airdroid&feature=related_apps
https://play.google.com/store/apps/details?id=com.smarterdroid.wififiletransfer&feature=related_apps
https://play.google.com/store/apps/details?id=com.lextel.transmit&hl=en
http://forum.xda-developers.com/showthread.php?t=1613912
http://www.pcworld.com/businesscent...elessly_between_android_and_any_computer.html
Still no ideas how to solve this?
Wireless abd works for data transfer, but for a rom flashing it doesn't
Regards
Kies won't recognise a phone with custom ROM...one possible way is to connect your phone to pc using stock firmware, allow drivers to be downloaded then flash the custom ROM again...my SGA running a custom ROM is able to connect to pc cause drivers were downloaded before this...
Another alternative is to enable windows update and allow it to auto-download the drivers...provided your internet connection is on...hope this helps...
Sent from my GT-S5830 using xda premium
The things is:
My Kies didnt recognize my phone with the stock rom.
My Odin didnt recognize my phone with the stock rom. (download mode - non related to the rom).
My Windows Explorer didnt recognize my phone with the stock rom.
So i've tried to install a custom rom as it could (it shouldnt) be a rom issue.
And the same as I've written happens.
Owh...stock GB is supposed to be in .rfs format...not .ext4...the zip must have reformatted it...
Sent from my GT-S5830 using xda premium
Hi guys,
i've problem with my S2, it doesn't start !!!!!
Is locked on screen with yellow triangle or in screen with empty battery with circle.
I can going in download mode but nothing else.
Someone can help me ?
Please !!!!!
Flash a new stock ROM vis Odin in Download mode
I tried on two PC but no one detect phone on USB.
I followed various guide for manage driver or other but without results.
I followed various solution for USB and brik and semibrik; nothing !!! Grrrrrrr!
stex_80 said:
I followed various solution for USB and brik and semibrik; nothing !!! Grrrrrrr!
Click to expand...
Click to collapse
As Anshmiester stated, flash a new stock ROM via Odin, in Download mode.
OK, i have to install new stock ROM by odin,... the question is: How without USB support ?
stex_80 said:
OK, i have to install new stock ROM by odin,... the question is: How without USB support ?
Click to expand...
Click to collapse
What do you mean by USB support?
You need to have the drivers for det you i9100. I got mine when I installed Kies. Kies includes the drivers for the phone.
But if you already installed them, and have problems, use Driver Fusion to wipe out every part of the Samsung drivers and reinstall them.
OK, i'll try also Driver Fusion, all other way are tested, kies, hemidall, semi-brik fix, ...
I'll give you feedback.
Driver Fusion doesn't detected Samsung driver on my PC..
Any idea ?
Next job for my S2 is on the flor forma locking the door ?
I am owner of the Galaxy S2. I updated yesterday to SuperNexus Jelly Bean ROM, didn't liked it. I restored my device to CM9 which i was using for a month without any problems. Then it started, computer couldn't recognize the phone anymore. Its like that SuperNexus broke something i don't know. I reformatted my Win 7 Ultimate x64 and installed fresh new CM10 - but after all my computer and S2 don't like each other - USB device not recognized. Chaos. I asked my friend to come over just to test with his S2 (he's on stock ICS 4.0.3 or 4.0.4), and when i plug his phone into my computer, everything works flawlessly. I tried mounting in recovery, i tried with and without usb debugging, Odin doesn't find phone neither, tried updating drivers - no luck... Dialing *#7284" just gives me "connection problem or invalid MMI code". Need help on this please!
You can check THIS thread. The one HERE , and also THIS thread.
I've read them all, tried every advice, but phone still isn't reacting to anything. So my problem is that phone couldn't connect to a computer, well it connects but it states "USB device not recognized", it charges but that's all. Everything started with Custom ROM SuperNexus. I've done these steps so far:
1. Reformatted my computer OS, which is Windows 7 Ultimate x64
2. Downloaded CM10 over my phone, get into recovery --> factory reset, wipe cache, wipe dalvik, format system, install ROM, wipe cache, wipe factory
3. I tried on my computer, tried on my old computer with Win XP x86
4. My friend's Galaxy S2 is working like a charm with MY cable on MY computer, which makes me believe that there is some defectiveness in my phone
5. I tried cleaning MicroUSB port with tooth pick, ear-cleaning pick (or how do you call it), needle with some paper wrapped around it, tried blowing in it
6. I tried with different USB ports, front ones, USB 3.0 - still no luck
7. I tried flashing Wanamlite and Neat ROM-s, still the same problem
I'm using Airdroid now, but i really need to know what's the problem! I have already ordered a new parts on E-Bay and I'm having high hopes about that solution. Im not able to post link to E-bay item, but search it under Item Number: 150904945773. Any other advice is really highly appreciable. Thank you
Try downloading the Rom over WiFi, or Hardline instead. Have you tried a different USB Cable ? Also I'm not able to check that Ebay # right now.
TEAM MiK
MikROMs Since 3/13/11
eBay item is this: New Samsung i9100 Galaxy SII S2 Charger Charge Port Flex Cable Replacement parts
OP, I'm hoping it works for you. You seem to be going in the right direction with your troubleshooting.
Well, i've downloaded this ROM (CM10) via WiFi, now i can do it over Airdroid too. But is there a way to flash Stock Original Samsung ICS in recovery? Or is it only available in Kies and Odin? I came across "Mobile Odin", do you guys have some experience with it, is it safe to use? How big are chances anyway that USB will work with stock ROM? Someone told me "your USB port on phone is OK, if it's charging it's not broken", so I'm thinking that it is not a hardware issue after all? And BTW i used several cables, and three different computers. My girlfriend have SGS3, i tried it like 2 hours ago with her cable on her computer with no luck (and of course her phone have no problems to connect to that computer using that cable). Thank you
I would try a Stock Rooted Rom, and see if that works correctly. If not try connecting the Device, and reboot the PC with the Device plugged in.
How to install stock ROM if i cannot get Kies or Odin to recognize phone? Via Mobile Odin?
kuleee said:
How to install stock ROM if i cannot get Kies or Odin to recognize phone? Via Mobile Odin?
Click to expand...
Click to collapse
Try USB solutions from My Android Solutions or Mobile Odin like http://forum.xda-developers.com/showpost.php?p=28302093&postcount=4789 ( procedure is same but written for Korean SGS 1
Guys let me tell you that I'm grateful to you, cause this Mobile Odin worked and my Stock Rooted ROM worked in connecting with PC. But not on first try when i got into a newly flashed Stock Rooted Firmware, i've let it to do his stuff, update what he needed to update blahblah. Then i tried to connect my cable - it didn't work. I cursed, i cursed so bad. Then i considered to give it another shot, rebooted the phone - and voila! Everything works, i tried 2-3 times and its working. Obviously SuperNexus started my problems, they couldn't be repaired by any other ROM i tried (i tried CM9, CM10, Wanamlite, old Wanamlite with MTP enabler, Neat ROM)... Then with Mobile Odin everything just worked. Dunno what really was the problem. Thank you all
Glad you got it sorted
TEAM MiK
MikROMs Since 3/13/11
Hello
I have a bit of a problem with my SGS2.
After updating to 4.1.2 from 4.0.3 it just died after 24 hours.
It doesn't go into recovery mode ( i had clockwork recovery)
It get stuck on SGS2 Logo when i try to boot it.
I can go into Download mode, but my PC won't detect it so i can flash it again with Odin.
Now, i tried to connect with a dozen cables, 5 different PCs, i even went to a GSM Service and had the usb module changed.
Still doesn't work or is unseen by my PC or any of the others PCs i have at hand.
I have all needed drivers installed. Other SGS2 can be detected by my PC and any other Android devices i tried so far.
Now in download mode it says:
Product Name :GT-i9100
Custom Binary Download: Yes (3 counts)
Current Binary: Custom.
I've tried some soft bricks solution to see if i can get it to work, but no luck so far since Odin is unable to detect my phone.
I understand i might have NAND rw corruption, but i didn't fully understand what that is and how to fix it.
What can i do to unbrick this phone or fix it?
Thanks in advance
Is your phone an I9100? Check under the battery.
Try other odin versions.
And tell us exactly what have you tried to flash.
Sent from the little guy
Yes, my phone is GT-i9100 for sure.
I've successfully flashed from 4.0.3 to 4.1.2 using CWM and i as i said the in previous post, the phone just stopped working after 24 hours or so.
After that i tired to flash the same 4.1.2 with Odin, to get it to work, but my phone couldn't be detected by any PC.
I tried with Odin 1.85 and 3.04, same thing with both of the versions.
There are a lot of 4.1.2 ROMs.
Sent from the little guy
I don't which 4.1.2 ROM i used at the moment, I'm at work, i have all the info i need on my PC home.
But i still can't understand why my USB is not working, do you have any idea?
It could be anything, but your pc will see your device, that's for sure.
Sent from the little guy
Hello everyone! sadly I have a problem with my phone.. I did something wrong when downgrading from cm11 to cm7 and now the phone goes on bootloop when I turn it on. I am able to put it on Download mode, but at the moment I have a pc with w8.1 and it says me that the device is unknown (so I can't flash any firmware using Odin). When I had a windows xp computer I had no problem with odin and so I could have solved the problem in no time.
I tried to install the samsung usb drivers many times but still the problem is there..
what do you suggest me to do?
thank you very much
Install Samsung drivers and use old cwm for cm 7. For cm11 use newest cwm...
nemanjsb said:
Install Samsung drivers and use old cwm for cm 7. For cm11 use newest cwm...
Click to expand...
Click to collapse
For CM11, it's CWM 6.0.5.0
For CM7, it's CWM 5.0.x.x
Sent from my D620R [Stock 4.4.2]
newpuppet said:
Hello everyone! sadly I have a problem with my phone.. I did something wrong when downgrading from cm11 to cm7 and now the phone goes on bootloop when I turn it on. I am able to put it on Download mode, but at the moment I have a pc with w8.1 and it says me that the device is unknown (so I can't flash any firmware using Odin). When I had a windows xp computer I had no problem with odin and so I could have solved the problem in no time.
I tried to install the samsung usb drivers many times but still the problem is there..
what do you suggest me to do?
thank you very much
Click to expand...
Click to collapse
ODIN doesn't work for Galaxy 5 in Win8.1. Use somebody else's PC that has Windows version older than 8.1.
SEE this thread to get a clear idea about which recovery should be used with what ROMs:
http://madteam.co/forum/index.php?topic=6338.0