Hello everyone! sadly I have a problem with my phone.. I did something wrong when downgrading from cm11 to cm7 and now the phone goes on bootloop when I turn it on. I am able to put it on Download mode, but at the moment I have a pc with w8.1 and it says me that the device is unknown (so I can't flash any firmware using Odin). When I had a windows xp computer I had no problem with odin and so I could have solved the problem in no time.
I tried to install the samsung usb drivers many times but still the problem is there..
what do you suggest me to do?
thank you very much
Install Samsung drivers and use old cwm for cm 7. For cm11 use newest cwm...
nemanjsb said:
Install Samsung drivers and use old cwm for cm 7. For cm11 use newest cwm...
Click to expand...
Click to collapse
For CM11, it's CWM 6.0.5.0
For CM7, it's CWM 5.0.x.x
Sent from my D620R [Stock 4.4.2]
newpuppet said:
Hello everyone! sadly I have a problem with my phone.. I did something wrong when downgrading from cm11 to cm7 and now the phone goes on bootloop when I turn it on. I am able to put it on Download mode, but at the moment I have a pc with w8.1 and it says me that the device is unknown (so I can't flash any firmware using Odin). When I had a windows xp computer I had no problem with odin and so I could have solved the problem in no time.
I tried to install the samsung usb drivers many times but still the problem is there..
what do you suggest me to do?
thank you very much
Click to expand...
Click to collapse
ODIN doesn't work for Galaxy 5 in Win8.1. Use somebody else's PC that has Windows version older than 8.1.
SEE this thread to get a clear idea about which recovery should be used with what ROMs:
http://madteam.co/forum/index.php?topic=6338.0
Related
Hi guys,
need a hand here, yesterday I plugged my S2 to my PC but it wouldn't show up. I've done this many times before. I was getting the message saying 'usb device not recognized'. I then flashed the new ICS resurrection rom by moving it to my SD Card through an adapter. I thought maybe the usb problem would go away.
As my luck would have it the flash went badly it seems because i'm now getting the kernel panic message on my device. I can't get it to recovery mode but I can get it to download mode BUT Pc doesn't recognize the device still...
Could this maybe be a damaged port on my device?
Is it maybe a driver problem?
Any help would be much appreciated....
Anyone have any advice?
pdscoelho said:
Is it maybe a driver problem?
Click to expand...
Click to collapse
Did you install the usb drivers that are included in kies? They're in the kies\usb driver directory.
peachpuff said:
Did you install the usb drivers that are included in kies? They're in the kies\usb driver directory.
Click to expand...
Click to collapse
I plugged in a galaxy TAB and used KIES through my web browser to transfer items to the TAB. Does this interfere with the SGSII? I haven't used KIES with the SII
Instructions are to install Kies and connect the phone with the Samsung cable and drivers are found .It does not mention install another device and it will work so its a guess as to driver conflict due to Kies looking for the TAB .
Could be port on PC not a mainboard port USB on phone dirty or custom rom buggered phone .
I would flash stock GB rom via Odin .
jje
JJEgan said:
Instructions are to install Kies and connect the phone with the Samsung cable and drivers are found .It does not mention install another device and it will work so its a guess as to driver conflict due to Kies looking for the TAB .
Could be port on PC not a mainboard port USB on phone dirty or custom rom buggered phone .
I would flash stock GB rom via Odin .
jje
Click to expand...
Click to collapse
I can only get my phone into download mode, when I connect and open up odin it isn't picking up the device.....so how can I flash anything to it?
Hi
never had that problem :|......Try instal CWM whit ROm manager(market) and u can go in Recovery Mode
OP, try this.
Ekibyo22 said:
never had that problem :|......Try instal CWM whit ROm manager(market) and u can go in Recovery Mode
Click to expand...
Click to collapse
I can't get the s2 into anything except download mode....I tried flashing a new rom to see if the usb problem would go away but something went wrong with the flash. I get the kernel panic error message. So no way of installing recovery or anything else...I have to fix it through odin but not getting it to see my device....
pdscoelho said:
I can't get the s2 into anything except download mode....I tried flashing a new rom to see if the usb problem would go away but something went wrong with the flash. I get the kernel panic error message. So no way of installing recovery or anything else...I have to fix it through odin but not getting it to see my device....
Click to expand...
Click to collapse
Sorry, missed that you can't get to anything BUT download mode.
Try flashing an older Gingerbread firmware wipe package then.
EDIT: specifically using mobile Odin, since your computer isn't detecting your phone via USB... not even sure if that works, but what do you have to lose at this point?
ctomgee said:
Sorry, missed that you can't get to anything BUT download mode.
Try flashing an older Gingerbread firmware wipe package then.
EDIT: specifically using mobile Odin, since your computer isn't detecting your phone via USB... not even sure if that works, but what do you have to lose at this point?
Click to expand...
Click to collapse
Never heard of mobile Odin, but i've found it on the market. How can I get this to my device? it doesn't load up anything except the kernel panic message or download mode with the key combo.....
pdscoelho said:
Never heard of mobile Odin, but i've found it on the market. How can I get this to my device? it doesn't load up anything except the kernel panic message or download mode with the key combo.....
Click to expand...
Click to collapse
Download the apk to your computer, and email it to yourself? Or via wifi file copy?
EDIT: I'm a dork, right, your phone doesn't boot. Um... I'm not sure now... have to think about it.
I'm going to have to get a new usb port in my S2, I just hope it works after that. Found a few guys that can do it for about $40-$60. LI'll let everyone know how it goes....
pdscoelho said:
I'm going to have to get a new usb port in my S2, I just hope it works after that. Found a few guys that can do it for about $40-$60. LI'll let everyone know how it goes....
Click to expand...
Click to collapse
Good luck, dude.
I resolved the problem! Thanks for the input guys
So, I cannot connect my phone to any pc.
Problem started after re-installing Windows 7 I believe.
The phone charges fine over usb.
Here's what I have tried so far:
I have changed mtp to ptp.
I have tried using different usb cables and ports
I have re-installed windows 3 times
I have installed Samsung drivers and kies, and tried fixing the error thru kies.
I have tried different kernels (Siyah and stock cm10 kernel)
I have tried on a different pc.
I have tried the stock sgs3 rom, it has Siyah kernel.
I have tried turning USB debugging on and off.
Galaxy S3 toolkit doesn't recognize my phone.
Any help is appreciated.
Screenshot of my phone information:
i.imgur.com/2Ifrd.png
Hakala said:
So, I cannot connect my phone to any pc.
Problem started after re-installing Windows 7 I believe.
The phone charges fine over usb.
Here's what I have tried so far:
I have changed mtp to ptp.
I have tried using different usb cables and ports
I have re-installed windows 3 times
I have installed Samsung drivers and kies, and tried fixing the error thru kies.
I have tried different kernels (Siyah and stock cm10 kernel)
I have tried on a different pc.
I have tried the stock sgs3 rom, it has Siyah kernel.
I have tried turning USB debugging on and off.
Galaxy S3 toolkit doesn't recognize my phone.
Any help is appreciated.
Click to expand...
Click to collapse
You say you already tried stock rom with Siyah Kernal. How did you get back to stock did you flash or use Odin?
I would make a backup, Use Superwipe script and use Odin to load Stock Ics 4.0.4 and then try. If that fails you can always restore back to your backup and someone else maybe able to provide a solution.
TBH it doesn't sound like its your PC if you have tried it on other PCs.
carrd said:
You say you already tried stock rom with Siyah Kernal. How did you get back to stock did you flash or use Odin?
I would make a backup, Use Superwipe script and use Odin to load Stock Ics 4.0.4 and then try. If that fails you can always restore back to your backup and someone else maybe able to provide a solution.
TBH it doesn't sound like its your PC if you have tried it on other PCs.
Click to expand...
Click to collapse
I had an older backup with the stock rom in it.
I'm not sure can Odin connect to my phone, so I would end up bricking it completely..
Hakala said:
I had an older backup with the stock rom in it.
I'm not sure can Odin connect to my phone, so I would end up bricking it completely..
Click to expand...
Click to collapse
Odin is relatively safe but I am not going to guarentee anything, There is a lot of tutorials on using odin on here and youtube. It is completely up to you what you do. My suggestion was purely based on what I would do in your situtation.
carrd said:
Odin is relatively safe but I am not going to guarentee anything, There is a lot of tutorials on using odin on here and youtube. It is completely up to you what you do. My suggestion was purely based on what I would do in your situtation.
Click to expand...
Click to collapse
I just tried to flash cf-root using odin and windows just gave me a error.
Could doing a megawipe or a superwipe make windows recognize my phone again then?
Uninstall Kies completely from your PC when its uninstalled reboot your PC then make sure the Kies folder located here is deleted
Program Files / Samsung / Kies
Next download and install Kies from the Samsung web site, reboot your PC once rebooted plug your phone in to the USB (preferably with the original USB cable), let the drivers install themselves.
Once installed you should have it working again.
ag4751 said:
Uninstall Kies completely from your PC when its uninstalled reboot your PC then make sure the Kies folder located here is deleted
Program Files / Samsung / Kies
Next download and install Kies from the Samsung web site, reboot your PC once rebooted plug your phone in to the USB (preferably with the original USB cable), let the drivers install themselves.
Once installed you should have it working again.
Click to expand...
Click to collapse
Done, it says USB device not recognized.
I'm currently installing Kies on a laptop, if it works it means that my motherboard is broken or something, if it doesn't it means my phones usb port is broken.
E: Okay, this windows is saying that the device is in error mode or something like that...
Question: How do I get my phone to stock without usb so I can take it to the warranty?
Hello,
Have you try if odin see the phone when it connected to your computer ?
yayourt said:
Hello,
Have you try if odin see the phone when it connected to your computer ?
Click to expand...
Click to collapse
It didn't, I just ran mobile odin and recovered my phone to stock so I can take it to warranty and such.
Thanks for everyone for the help.
Hakala said:
It didn't, I just ran mobile odin and recovered my phone to stock so I can take it to warranty and such.
Thanks for everyone for the help.
Click to expand...
Click to collapse
Pants. I'm in the same situation, but my phone isn't rooted. So I can't use mobile odin. Anyone else have any thoughts on this? Is there any way of using stock recovery to either flash an official image or perhaps root?
Mike.
Hi
So, I have a samsung galaxy ace, which I haven't used for a while now. I decided its time to sell it. Problem is I flashed a custom rom (cyanogenMod 9) on it back then and it is also rooted. Before I sell it I need to unroot it and flash the stock rom back on. (Phone is working fine and is bootable)
So far I have unrooted it. As for flashing the stock rom, I'm having issues.
I have downloaded various versions of Odin (4.38, 4.34, 1.87), but none of them seem to detect the phone on my PC. I have downloaded the usb drivers and my PC itself seems to detect that its connected, but not Odin. I have Kies installed and have made sure it is not running through task manager.
So, can anyone PEASE help me with this. I'm not too familiar with Odin either, so I don't want to accidentally brick my phone.
Novark
AW: Issues flashing stock rom on Samsung Galaxy Ace
You need to use Odin 3.07 newer version WON'T work.
¿U mad bro¿
Android-fany said:
You need to use Odin 3.07 newer version WON'T work.
¿U mad bro¿
Click to expand...
Click to collapse
I just tried and its still not being detected
AW: Issues flashing stock rom on Samsung Galaxy Ace
Novark said:
I just tried and its still not being detected
Click to expand...
Click to collapse
Installed USB drivers?
Is the phone in download mode?
¿U mad bro¿
Android-fany said:
Installed USB drivers?
Is the phone in download mode?
¿U mad bro¿
Click to expand...
Click to collapse
Yes and Yes
Might be worth pointing out that I am running Windows 8 on my PC.
And my phone has cyanogenMod 7 not 9.
Also, I have just started receiving an error message when connecting the phone. It will charge it fine through the usb cable, but when in download mode it started giving the error message: USB device not recognised.
AW: Issues flashing stock rom on Samsung Galaxy Ace
Novark said:
Yes and Yes
Click to expand...
Click to collapse
Try reinstalling the drivers. Download Android SDK and install the "Google USB drivers" package.
¿U mad bro¿
I had this problem too the first time i tested Odin to see if it would detect my device. Make sure you're using a main USB port on the back of your computer, not any on the front/sides/ monitor etc. You might have to remove the USB and insert it a couple of times before it detects your device then it should install the required drivers allowing the device to be detected. I also did not use Kies for the drivers but downloaded a standalone installation package that you can find by searching in the forums.
Novark said:
Might be worth pointing out that I am running Windows 8 on my PC.
And my phone has cyanogenMod 7 not 9.
Also, I have just started receiving an error message when connecting the phone. It will charge it fine through the usb cable, but when in download mode it started giving the error message: USB device not recognised.
Click to expand...
Click to collapse
If windows is showing not recognise error in one port, it will most probably show it always like this
Try different port and reinstalling drivers with phone connected helps
And many times, drivers have to be installed many times
Hi to all!
Since yesterday, my PC which is running W8 gave an error whenever i tried to connect my xperia mini to my PC. 'USB device not recognized'. I was running CM 10.1 and a new update was available so i tried to flash it. Flashed it successfully and then the network was gone so, what i did was flash back to CM 9.1. Here the problem occurred. My PC is not recognizing my phone. I tried flashing the kernel with flash tool and followed this :- http://forum.xda-developers.com/showthread.php?t=2095087 Still nothing. Connected it to another laptop running windows 8. Even that didn't work so i connected my phone to my dad's laptop running windows 7. I was somehow able to flash kernel at first but then the same error there too! Tried 3 different PC's and i'm not able to solve this issue! Please help!
as you have a custom kernel on device,try accessing CWM and installing the stock ROM,then install CM again..
btw did you check the CM10.1 page for any bugs..?
a|\|droid_user said:
as you have a kernel on device,access CWM and try installing the stock ROM,then install CWM again..
Click to expand...
Click to collapse
Tried 2 different ROM's on the same kernel. Nothing happens. I get the same error each time! Also now my ear-piece won't work too (In both the ROM's i flashed) :'(
I also noticed that using Win XP, i can connect MSC to my PC and copy/paste items. But as soon i go into fastboot mode, it gives me the error!
Edit: I have used CM 10.1 before with no bugs. This started happening only yesterday!
I know this sounds dumb, but do you have ADB on (android debugging) because my windows 8 computer doesn't recognise my phone without it on. Hope I helped.
Gamertroid said:
I know this sounds dumb, but do you have ADB on (android debugging) because my windows 8 computer doesn't recognise my phone without it on. Hope I helped.
Click to expand...
Click to collapse
I have everything installed! Right now i'm on XP. Even it doesn't recognize my phone in fastboot mode!
check device manager..
when you connect your xperia..what does it show ?
try updating the driver by manual selection...
if that doesnt work..
open flashtool..
check the logs when you connect your xperia..
-DELETE-
I somehow managed to connect it to flashhtool in flash mode! Now i'm flashing .42 ftf file to use my device somehow with 0 bugs/glitches. It is taking forever to do so! See the attachment!
Any other way to flash ftf file?
Thank you
Okay, so i did flash the ftf and now running GB .42 Still can't connect to computer
What should i do?
Is your computer detecting any other xperia device,or an iphone...?
check if your micro usb port is damaged...
Sent from my WT19i using xda app-developers app
ishanbhatnagr96 said:
Okay, so i did flash the ftf and now running GB .42 Still can't connect to computer
What should i do?
Click to expand...
Click to collapse
Goto flashtool/drivers/ and install drivers and check...
a|\|droid_user said:
Is your computer detecting any other xperia device,or an iphone...?
Sent from my WT19i using xda app-developers app
Click to expand...
Click to collapse
It is detecting my pendrive, my hard-drive and my nexus!
Edit: Tested on 3 laptops each running:- Win8 and other two Win7. Also, tested on 1 PC (dual-booted with XP and Win8) Same result in all of them.
Is SEUS detecting the phone?
Try changing connection modes on the phone...
if not..flash stock kernel
get me a screenshot of flashtool logs for check drivers option..
its here help->check drivers..
Solved (I guess)
Well i guess i solved the problem! I plugged the USB to the back ports. It worked. I guess this is a temporary solution. Now i think my SdCard got corrupt or something. I'll format it
Thanks for all your help guys! :highfive:
PS:- I'll disturb you guys if i face this problem again
ishanbhatnagr96 said:
Well i guess i solved the problem! I plugged the USB to the back ports. It worked. I guess this is a temporary solution. Now i think my SdCard got corrupt or something. I'll format it
Thanks for all your help guys! :highfive:
PS:- I'll disturb you guys if i face this problem again
Click to expand...
Click to collapse
Maybe its the prob with ports, others reported it not working with usb3.
Regards
-N
ishanbhatnagr96 said:
Well i guess i solved the problem! I plugged the USB to the back ports. It worked. I guess this is a temporary solution. Now i think my SdCard got corrupt or something. I'll format it
Thanks for all your help guys! :highfive:
PS:- I'll disturb you guys if i face this problem again
Click to expand...
Click to collapse
well,why dont try reinstalling your usb controller drivers to see if the front port is workin?...
otherwise if you are done with this problem...change the topic to RESOLVED..
Hello guys,
today i wanted to try to flash stock rom (DBT-I9100GXXLSR-20130218205023) in my GT-I9100G. I had cm7 JB4.2.1 in my GS2 with CWM recovery.
Everything went fine until i went into download mode. My Computer and my laptop are recognizing the GS2 as a Samsung Modem instead of the device in download mode.(I also tried different cables, drivers and USB Ports, Kies aswell)
I tried much stuff untill i flashed a stock kernel via cwm (B_Safe_Kernel_XXLSR_CWM6). Now my cm 7 is broken and im not able to reflash it via CWM.
I just need helt to get that modem driver recognition to work.
can anyone help me? if you need some more informations just aks me and i try to get them!
greetings alex
**1. Edit**
So the cwm error was status 7 and easy to fix. i installed cm 10 now and ill try to fix the problem with the drivers in download mode