Related
Hi
I have MobileUncle Tooll (granted SuperUser) and ROM Manager (granted SuperUser) installed on my Goophone I5 MTK6577 BUT I still CANNOT bypass Android Recovery 3E to install the goo.zip ROM - how do you bypass the 3E please???
ANYONE?
goophone v88 i5 from dhgate seller name shenzhen
Hey my phone is goophone i5 v88 i5 I brought from dhgate seller nane is shenzhen iam also trying to bypass cwm recovery but no sucess when flashing thrpugh mut and the reebooting to recovery blank display I think the processor is mt6577 dual core ram is 512 mb and screen resolution is 480*854 but with a yweaked stock kernel the system show fake hardware like 2gb ram higher screen resolution and so more but the phone rxactly looks and feels like iphpne 5 and about the software running on this phone I thing it is tje bugg free and coolest full ios6 themed rom
cj27282 said:
Hi
I have MobileUncle Tooll (granted SuperUser) and ROM Manager (granted SuperUser) installed on my Goophone I5 MTK6577 BUT I still CANNOT bypass Android Recovery 3E to install the goo.zip ROM - how do you bypass the 3E please???
Click to expand...
Click to collapse
Same here....unable to enter recovery mode after flashing CWM ...phone works but it "skips'" the recoverymode...factory mode works but yee...some solution for this would be nice......atleast i can still use the phone...altho with the stock rom witch is crap cause i cant back it up for flashing the phone...
cj27282 said:
Hi
I have MobileUncle Tooll (granted SuperUser) and ROM Manager (granted SuperUser) installed on my Goophone I5 MTK6577 BUT I still CANNOT bypass Android Recovery 3E to install the goo.zip ROM - how do you bypass the 3E please???
Click to expand...
Click to collapse
Any progress?
cj27282 said:
Hi
I have MobileUncle Tooll (granted SuperUser) and ROM Manager (granted SuperUser) installed on my Goophone I5 MTK6577 BUT I still CANNOT bypass Android Recovery 3E to install the goo.zip ROM - how do you bypass the 3E please???
Click to expand...
Click to collapse
Ok so problem solved.... unfortunately it will delete everything on your phone....i simply flashed the phone using SP-Flashtool and a rom from here => http://pan.baidu.com/share/link?shareid=324294&uk=540296524#dir/path=/Rom/Goophone I5 Rom supplyed by Zap ...
its the version v18 ... theres a v22 also you can download from http://pan.baidu.com/share/link?shareid=412131&uk=3022339290 but i havent tryed it yet so i dont know how well it works....
can you see what version your stock rom is? ... i think mine was 27 but im not 100% and i have been looking for a later version stock rom but i havent found any yet.....so yee.... the rom i installed now semes to be pretty much the same although it gave me lower antutu scores than the first one i had...dunno how mush that has to do with the software.... but userwise i havent noticed any major differance more than the charging animation thats different when the phone is switched of..and yes the system recovery 3e is in english
now ofcourse these roms are for the Fastcardtech Goophone I5 N2 micro simcard!!!
all is done at your own risk!!
also you HAVE TO INSTALL the mtk6577 VCOM driver in order to be able to use the sp.flastool correctly.....anything else might **** up your phone.... theres a good tutorial here http://forum.xda-developers.com/showthread.php?t=2206421
good luck and please post what stock version you have running now!! and if the phone is running fine otherwise maybe you want to reconsider flashing it since the versions i posted for download are v18 and v22....would love to get my hands on the newest stock rom...(did try to just flash the recovery image from the v18 but it bricked my phone)
jinishpv said:
Hey my phone is goophone i5 v88 i5 I brought from dhgate seller nane is shenzhen iam also trying to bypass cwm recovery but no sucess when flashing thrpugh mut and the reebooting to recovery blank display I think the processor is mt6577 dual core ram is 512 mb and screen resolution is 480*854 but with a yweaked stock kernel the system show fake hardware like 2gb ram higher screen resolution and so more but the phone rxactly looks and feels like iphpne 5 and about the software running on this phone I thing it is tje bugg free and coolest full ios6 themed rom
Click to expand...
Click to collapse
Hello,
About that phone, i buyed that phone, from the same seller, yesterday.
It is fake?Its not the actual goophone i5s that we see on their website?
Thanks!
i have the goophone i5 mt6577 with bee on the back cover
i can have the original recovery image recovery E3?
i wanto to turn back to original factory rom but my older backup don't recognize from colonelzap's cmw recovery
thank you
luponero76 said:
i have the goophone i5 mt6577 with bee on the back cover
i can have the original recovery image recovery E3?
i wanto to turn back to original factory rom but my older backup don't recognize from colonelzap's cmw recovery
thank you
Click to expand...
Click to collapse
did you flash the colonelzap recovery with flashtool??
if your colonelzap cwm works then you should back up your rom with cwm...
(I have not tryed it my self but i think it should work)
download this rom
http://pan.baidu.com/share/link?shareid=412128&uk=3022339290
uncompress and youl find a file called RECOVERY.IMG.....
now open your flashtool (i use sp-flashtool) and load the scatterfile "MT6577_Android_scatter_emmc.txt"
the flash tool is gonna show you a list with all the files that where in the zip..
uncheck all of them so the only one that is checkes is the RECOVERY.IMG ....and then you flash and TADA.....you should have your old S3 recovery back
if it all goes to **** you can just flash the complete rom and it will work.. .....atleast if you have the gooptone i5 n2/lte mtk6577
dont use mobile uncle for these files...that screwed up my phone....they need to be flashed to the phone!!
AND... this is the international v18 rom... dont know what version you have right now....but if you manage to make a back up rom of your phone PLEASE SHARE!!! .... ive been looking for the later international rom....and if you have the backup you can allways upgrade from the v18....so
GOOD LUCK!! ...keep us posted! ...and if you need more flashingdeetales you can just google or ask
CWM Goophone i5 N2 black screen
Hi , I have similar issue like this ...
I have Goophone i5 N2 from aliexpres.com
It's come with original ROM and with Root, unfortunately it has lot of bugs . So I would like to install custom ROM from Colonelzap.blogspot
I spent more then 2 days with trying to flash Clock work recovery mode . So I'll be able to flash new ROM. But there I'm stuck
I red several tutorial for instalation , I did go trough threads here on forum , etc but still without any success .
1, I tried to use MobileUncle MTK for set recovery image with image from colonel zap blog
2, I tried to use (maybe 10 different version of) SP Flash Tool and still got 2 issue (4050 or 8038) during flashing
I used recovery image from Greg's Mobile gadgets
And result is still same , When I try to load to recovery mode , I still got black screen only .. And I have to restart mobile again , then it start up normally ...
I'm starting to be little bit desperate
I'll really appreciate any help or advice
PS: because forum rules , I can't add any links to sources which I used .. But I'll response very fast for any questions. Thanks
Dude!! u gotta make sure u have the MTK Vcom drivers installed on your computer......when u got that its easy peasy..... make sure your phone us turbned of and DISSCONNECTED from the coputer... now in SPflashtool you load the rom that u wanna flash and you press the transfer button....when thats done the computer is gonna start looking for the phone.....this is the moment you connect your phone to the computer....otherwise it wont work...windows will start looking for som other crap driver to use with your phone.......
if u wanna get ur phone to work well you should go to the talkingmobi blog and download the stock rom and flash that one....then when thats done flash the CMW and throu that u put in the manuxo rom!!......thats more or less what ive done...altho i made my own rom...but its more or less the same as manuxos just with less chinese crap...but that u can do your self when u got the phone set up...easyest way i think is with "root app remover" that u can get for free from the app store...or "Playstore" to be precise... good luck!!
ja.viper said:
Hi , I have similar issue like this ...
I have Goophone i5 N2 from aliexpres.com
It's come with original ROM and with Root, unfortunately it has lot of bugs . So I would like to install custom ROM from Colonelzap.blogspot
I spent more then 2 days with trying to flash Clock work recovery mode . So I'll be able to flash new ROM. But there I'm stuck
I red several tutorial for instalation , I did go trough threads here on forum , etc but still without any success .
1, I tried to use MobileUncle MTK for set recovery image with image from colonel zap blog
2, I tried to use (maybe 10 different version of) SP Flash Tool and still got 2 issue (4050 or 8038) during flashing
I used recovery image from Greg's Mobile gadgets
And result is still same , When I try to load to recovery mode , I still got black screen only .. And I have to restart mobile again , then it start up normally ...
I'm starting to be little bit desperate
I'll really appreciate any help or advice
PS: because forum rules , I can't add any links to sources which I used .. But I'll response very fast for any questions. Thanks
Click to expand...
Click to collapse
virre62 said:
Dude!! u gotta make sure u have the MTK Vcom drivers installed on your computer......when u got that its easy peasy..... make sure your phone us turbned of and DISSCONNECTED from the coputer... now in SPflashtool you load the rom that u wanna flash and you press the transfer button....when thats done the computer is gonna start looking for the phone.....this is the moment you connect your phone to the computer....otherwise it wont work...windows will start looking for som other crap driver to use with your phone.......
if u wanna get ur phone to work well you should go to the talkingmobi blog and download the stock rom and flash that one....then when thats done flash the CMW and throu that u put in the manuxo rom!!......thats more or less what ive done...altho i made my own rom...but its more or less the same as manuxos just with less chinese crap...but that u can do your self when u got the phone set up...easyest way i think is with "root app remover" that u can get for free from the app store...or "Playstore" to be precise... good luck!!
Click to expand...
Click to collapse
Hi ,
I did this , several times . I installed correct Vcom driver, and update to last version . And I did follow steps for SP Flash tools. And i can see for aprox 2 sec , load driver for Vcom for Mediatek and So I think , that this part I made correctly.
When I tried load scattle file in to SP flash tool , and then run download and after that I connect switch off phone via cable .
SP FT find mobile via Vcom , and start upload and I see red progress bar on 100 and then after couple seconds I got error message :
1 , sometimes : BROM ERROR: S_FT_NEED_DOWNLOAD_ALL_FAIL (4050) ...
2, or : SP Flash Tool error 8038
ohh yee... ive had that aswell when i flashed the ladies n9589.....thats either due to a bad rom...maybe some error when you downloaded it OR ande most probably an incompatible version of SPFlashtool.... sometimes you have to try diffrent versions to get it to work on your specific phone... if u got the goophone i5 n2/LTE then you should try "SP_Flash_Tool_v3.1224.01"...
Thats the one i use for flashing my goophone and it works just fine.....and when you flash the CWM you should first boot up the phone with the latest rom you flashed b4 cause if you flash on an unbooted rom it wil most probably brick your phone so u gotta do the complete romflash from scratch....remember most costum roms are basically like "CWMbackups" that people do on their modifyed roms and spread....so with spflashtool you allways need to start with a propper rom with scatterfile....but ye....try running annother version of spflashtool... like the one i wrote in top...works for me ...and u can find it on goolgle
ja.viper said:
Hi ,
I did this , several times . I installed correct Vcom driver, and update to last version . And I did follow steps for SP Flash tools. And i can see for aprox 2 sec , load driver for Vcom for Mediatek and So I think , that this part I made correctly.
When I tried load scattle file in to SP flash tool , and then run download and after that I connect switch off phone via cable .
SP FT find mobile via Vcom , and start upload and I see red progress bar on 100 and then after couple seconds I got error message :
1 , sometimes : BROM ERROR: S_FT_NEED_DOWNLOAD_ALL_FAIL (4050) ...
2, or : SP Flash Tool error 8038
Click to expand...
Click to collapse
virre62 said:
ohh yee... ive had that aswell when i flashed the ladies n9589.....thats either due to a bad rom...maybe some error when you downloaded it OR ande most probably an incompatible version of SPFlashtool.... sometimes you have to try diffrent versions to get it to work on your specific phone... if u got the goophone i5 n2/LTE then you should try "SP_Flash_Tool_v3.1224.01"...
Thats the one i use for flashing my goophone and it works just fine.....and when you flash the CWM you should first boot up the phone with the latest rom you flashed b4 cause if you flash on an unbooted rom it wil most probably brick your phone so u gotta do the complete romflash from scratch....remember most costum roms are basically like "CWMbackups" that people do on their modifyed roms and spread....so with spflashtool you allways need to start with a propper rom with scatterfile....but ye....try running annother version of spflashtool... like the one i wrote in top...works for me ...and u can find it on goolgle
Click to expand...
Click to collapse
I used your suggested version of SP_Flash_Tool_v3.1224.01 and I used 2 different recovery.img , but in both tries i got same error as you can see on image
So i tried to upload new rom .
And it's look like a made a brick from this ... Now it doesn't respond at all ... SP flash tool doesn't recognize mobile at all
I can't connect now to the SP flash tool , it's just dont recognize phone , I can see only in device manager , which see 2 cards
and when I connect phone I can see for a moment USB Vcom port driver in list and for 1 second I can see that it write
Code:
Device is work properly
and then is change to image
Code:
Currently, this hardware device is not connected to the computer. (Code 45)
To fix this problem, reconnect this hardware device to the computer.
Do you have the ADB drivers installed on your computer? .... might be there where your problem is.....or annother conflicting driver on your computer....google the forums for ADB driver MTK Vcom driver install.... as i get it the computer wont know how to talk linux without the ADB pack.......i think its included in some vcom driver packs but i do believe i had to install that separatly the first time.....check that out...cause it should work.....if now try it with annother computer...could be some crap driver on your computer messing it up...i had an emulator at one point messing my spflashtool up....
ja.viper said:
So i tried to upload new rom .
And it's look like a made a brick from this ... Now it doesn't respond at all ... SP flash tool doesn't recognize mobile at all
I can't connect now to the SP flash tool , it's just dont recognize phone , I can see only in device manager , which see 2 cards
and when I connect phone I can see for a moment USB Vcom port driver in list and for 1 second I can see that it write
Code:
Device is work properly
and then is change to image
Code:
Currently, this hardware device is not connected to the computer. (Code 45)
To fix this problem, reconnect this hardware device to the computer.
Click to expand...
Click to collapse
stock ROM goophone-i5-0428-f-yzs.zip
virre62 said:
Do you have the ADB drivers installed on your computer? .... might be there where your problem is.....or annother conflicting driver on your computer....google the forums for ADB driver MTK Vcom driver install.... as i get it the computer wont know how to talk linux without the ADB pack.......i think its included in some vcom driver packs but i do believe i had to install that separatly the first time.....check that out...cause it should work.....if now try it with annother computer...could be some crap driver on your computer messing it up...i had an emulator at one point messing my spflashtool up....
Click to expand...
Click to collapse
So , I don't think so that problem is the driver, because SP flash tool works fine when I try to update firmware , it's finish all task , but then the mobile doesn't start . I think that I don't have correct ROM . I tried 3 different ROM and mobile still not start up . Still just blink screen and that's all . And then I have to some how switch off . Then I'm able to do update again trough SP flash Tool , but I need correct one ROM.
I tried to find stock ROM Goophone-i5-0428-f-yzs.zip , but I found it only on some crazy Chinese site 400GB.com (file/19858713) and I was unable to download it .:silly:
are you sure its a goophone you have?
Also..... your phone NEEDS to be charged with ATLEAST 60% or it will fail....flashing really drains the battery and ive had flashings fail just cause of low battery......but yee.... if its not a real goophone it wont work either way.... or if its annother model....you need to have the correct rom for the right phone or it will fail 99,5% of the times..
dont think i can do much more for u.....running out of ideas......it should work with that assuming your hardware is good.
ja.viper said:
So , I don't think so that problem is the driver, because SP flash tool works fine when I try to update firmware , it's finish all task , but then the mobile doesn't start . I think that I don't have correct ROM . I tried 3 different ROM and mobile still not start up . Still just blink screen and that's all . And then I have to some how switch off . Then I'm able to do update again trough SP flash Tool , but I need correct one ROM.
I tried to find stock ROM Goophone-i5-0428-f-yzs.zip , but I found it only on some crazy Chinese site 400GB.com (file/19858713) and I was unable to download it .:silly:
Click to expand...
Click to collapse
stock ROM goophone-i5-0428-f-yzs.zip
virre62 said:
are you sure its a goophone you have?
Also..... your phone NEEDS to be charged with ATLEAST 60% or it will fail....flashing really drains the battery and ive had flashings fail just cause of low battery......but yee.... if its not a real goophone it wont work either way.... or if its annother model....you need to have the correct rom for the right phone or it will fail 99,5% of the times..
dont think i can do much more for u.....running out of ideas......it should work with that assuming your hardware is good.
Click to expand...
Click to collapse
I saw some fake goophone on net , but it was with dual core CPU MTK 6587 etc ...
When I download SU and some other app like CPU Z ,etc I checked and I didn't see any suspicions information . So I hope that it is real Goophone i5 N2 ...
When I finished update firmware I saw in SP Flash tool that it's show some device info , so I'll add tomorrow another screen from this app.And try to verify if it's original goophone i5 N2 .
But this info about at least 60% of batter is important! Because it was charged about 50 % when I run update!
But process of flashing finished without any errors and in the end I saw Green circle , SO I was thinking that It's was finished successfully .....
Important question is . What should be done after updating new Firmware ?
I just tried to Start up the mobile .Should I do anything else ?
well if you get the green circle then its most probably that your out of battery......leave the phone charging for some hours... flash it and when your doen unplug it from the computer and just start it and wait cause the first boot up usually takes time,.....maybe up to 2-10 min depending on what rom u flashed......if you dont have enough battery to complete first boot you might run in to problems.....and if you wanna test your hardware you press the volume + and power and you get in to the factory hardware test menu just if u wanna make sure that ur phone is ok
ja.viper said:
I saw some fake goophone on net , but it was with dual core CPU MTK 6587 etc ...
When I download SU and some other app like CPU Z ,etc I checked and I didn't see any suspicions information . So I hope that it is real Goophone i5 N2 ...
When I finished update firmware I saw in SP Flash tool that it's show some device info , so I'll add tomorrow another screen from this app.And try to verify if it's original goophone i5 N2 .
But this info about at least 60% of batter is important! Because it was charged about 50 % when I run update!
But process of flashing finished without any errors and in the end I saw Green circle , SO I was thinking that It's was finished successfully .....
Important question is . What should be done after updating new Firmware ?
I just tried to Start up the mobile .Should I do anything else ?
Click to expand...
Click to collapse
Hello, I tried to flash another Rom my phone and then my phone does not want to include tried anything I read through the forum tried it with Flash Tool but it does not flash its says that everything is OK but will not start my computer recognizes it as MTK port but does not get anything please help me. Phone model is Alcatel One Touch 991X-2BTBBG3-S40 (Bulgarian Globul Touch)
hi accidently well formatted the entire flash after my fone got bricked now the phone doesnt get run.
i have gionee d1 dream , the phones gets detected in sp flash tool through usb but i have removed everything and i cant find a way to install a firmware again.
do i have hope? i just bought it 2 days back and im very sad for messing it up.
Sp flash tools - formatted android phone
i ve the same case here. usb detected. i can format as many time i want.. it works.... how to start my phone again. i did a backup before formatting . so i ve my previous rom files....
Help possible??
naxilla100 said:
i ve the same case here. usb detected. i can format as many time i want.. it works.... how to start my phone again. i did a backup before formatting . so i ve my previous rom files....
Help possible??
Click to expand...
Click to collapse
Same case here but ny device boot, its just doesn't have an operating system as it is formatted
aliranan8 said:
hi accidently well formatted the entire flash after my fone got bricked now the phone doesnt get run.
i have gionee d1 dream , the phones gets detected in sp flash tool through usb but i have removed everything and i cant find a way to install a firmware again.
do i have hope? i just bought it 2 days back and im very sad for messing it up.
Click to expand...
Click to collapse
same case here , after formatting , phone won't power on or can't be detected by sp flash tools , please please please , even if i connect a charger it is still not charging , is there hope for my dead phone? my phone is a110
Give it to customer care or flash factory image
Sent from my One V using Tapatalk
phone revived
My phone is already revived from the dead , and i already fixed the unknown imei for the sim card slots , my problem now is the NVRAM error for the wifi,
can any one help, i alreadt tried the temporary fix , with changing the wifi file using hex editor, i want a permanent fix.
Same Problem
I have also the same case and given to service center. I am afraid whether service center will consider it under warranty.
BTW, how did you revive your phone ? I am interested to know.
I have XOLO Q700.
markypuno said:
My phone is already revived from the dead , and i already fixed the unknown imei for the sim card slots , my problem now is the NVRAM error for the wifi,
can any one help, i alreadt tried the temporary fix , with changing the wifi file using hex editor, i want a permanent fix.
Click to expand...
Click to collapse
How?
markypuno said:
My phone is already revived from the dead , and i already fixed the unknown imei for the sim card slots , my problem now is the NVRAM error for the wifi,
can any one help, i alreadt tried the temporary fix , with changing the wifi file using hex editor, i want a permanent fix.
Click to expand...
Click to collapse
hey gay i saw your post saiyng that your phone is revived? how you got it? i have a phone dead for sp tools and want to reive it.
wt***
I have the same problem guys I just flash my spice dream uno (android one) with sp flash tool after the flashing my phone is not booting up even now s.p. flasher is not searching my phone.......................
what i have try
1. reinstall drivers.
2. reinstall sp flash tool
3. try it with battry and with out it
4.try to flash it with out virson of s.p. flash tool
5. use new data cabal
but nothing is working
if any one know how to resolve it please help us
:crying::crying: :crying: :crying: :crying:
i formated my intex aqua i5 by the sptools now my phone not detected in sp flash tool through usb i cant find a way to install a firmware again.
please help me ...........................
Unpack the rom to a folder then unpack SPFT start SPFT, Select and load scatter file from rom folder, press download,Then connect the powered off V785 phone to the usb cable.
Original Stock rom
http://www.mediafire.com/download/hoaken3645l0r3c/ot-V785-2AVDEG1_Original_SPFT_ROM_by_bRkA.7z
flash tool
http://www.mediafire.com/download/q5zrm94o4in1ga8/SP-Flash-Tool-v3.1344.0.212.7z
bricked my vodafone 785
hello...do i have a hard brick {vodafone smart mini 4:crying::crying:}?i flashed wrong boot image then i formatted with sp tools by mistake(i know,dump hey) so now i think my backup is corrupt,most files short...so can u pliz upload a sp flash tool backup plllizz i beg u...or preloader file....thanx
MTK Flash Tool dump of Alcatel OneTouch 4033 ...........Just build prop edit it back to vodafone 785 once flashed if it bugs you. <<<< What is the format of this file ??? OK ARC compressed managed it...
I've got bricked Vodafone 785 and I think only spflash will help me but I don't have any stock rom
Please help ?
EDIT:
Someone did format phone .... sp flash works but only Alcatel popc3 logo and recovery is avaible... after spflash I have broken partition table .... I don't know what to do :/
H_C_K said:
Someone did format phone .... sp flash works but only Alcatel popc3 logo and recovery is avaible... after spflash I have broken partition table .... I don't know what to do :/
Click to expand...
Click to collapse
Check it out:
gsmpro.com.pl/serwis/item/190-vodafone-785-smart-4-mini-naprawa-firmware-imei-polskie-menu-usuwanie-blokad-root
HEELP!!!
I was trying to put the nav bar (qemu.hw.mainkeys=0) in the build.prop file and rebooted the phone and iit is boot loop. What can I do? I haven´t CWM because I didnt find it, and I dont find the drivers of the phone.
Please help me it is a new phone ( 2 weeks) and my mum wont ever buy me a smartphone anymore .:crying::crying::crying::crying::crying::crying::crying::crying::crying::crying::crying:
Is there a way to get fota updates for this device as a regular download through pc? If so, could someone please point me to the location? I need the latest update zip for this phone (i think from nov/dec 14) in german.
HI, I followed the instructions above, but I can't get the o.s. Just have the clockworkmod recovery now, so the vodafone 785 doesn't start. I also tried to put the backup folder into my extsd but I'm not able to restore the smartphone from the backup you uploaded (from cwm recovery), because it says "no file". Please can you help me?
Does this work? Anyone confirm?
CWM Backup of Vodafone Smart 4 Mini stock rom with modded CWM recovery, Thanks to fulgerul46 for posting.
Link
---------------------------------------------------------
Click to expand...
Click to collapse
Hello guys.
I really need this file to restore my phone can someone reupload it somewhere or pm me a link?
Thanks in advance.
I have a new vodafone smart 4 mini UK PAYG with 4.4.2
and another with 4.2.2.
Cant get it to update to same as other one ie 4.2.2 to 4.4.2
using OTA as both say they are uptodate.
Am newbie.
I guess copy firmware from one to the other somehow
and pass a copy to stock firmware archives.
Phone is DEAD. Don't Flash Flashtool File...
Can anyone explain what is to be done is phone is dead ? Totally confused !
I create fw 4 you
ex.ua/163049604103
Anyone? VF785 stock rom?
suslix78 said:
I create fw 4 you
ex.ua/163049604103
Click to expand...
Click to collapse
Where is the file please I need it.
CWM Backup of Vodafone Smart 4 Mini stock rom with modded CWM recovery, Thanks to fu
" CWM Backup of Vodafone Smart 4 Mini stock rom with modded CWM recovery, Thanks to fulgerul46 for posting."
Any chance we can get a re-up of this ROM, link is dead. Thanks!
Vodafone smart 4 mini doesn't start
Hi
I bought brand new vodafone smart 4 mini and first I did was root to unlock phone, next a very stupid idea came to my had to update software, after that my phone worked terreble, so another stupid idea came to my head to flash oryginal ROM, I downloaded rom, SPFlash tool , load scatter file and pressed download, everything looked good, it took about one minute and green circle ok at the end. I was verry happy, for couple seconds only, my brand new phone never started again. there was only short blink when I pressed power button , and then nothing. I've been trying to flash the phone many times after that with couple different ROM's but no succes. sometime phone doesn't even blink after flashing. Sometimes at the begining of flashing there is mesage "no partition table" or memory error. Please somebody help me, I'm loosing hope.
I think the only good news is that the "Media Tek PreLoader USB VCOM" still works, and looks like phone cooperates with the tool, maybe I should use different tool, or test phone first with some tool, or create partitin table ?
wigor75 said:
Hi
I bought brand new vodafone smart 4 mini and first I did was root to unlock phone, next a very stupid idea came to my had to update software, after that my phone worked terreble, so another stupid idea came to my head to flash oryginal ROM, I downloaded rom, SPFlash tool , load scatter file and pressed download, everything looked good, it took about one minute and green circle ok at the end. I was verry happy, for couple seconds only, my brand new phone never started again. there was only short blink when I pressed power button , and then nothing. I've been trying to flash the phone many times after that with couple different ROM's but no succes. sometime phone doesn't even blink after flashing. Sometimes at the begining of flashing there is mesage "no partition table" or memory error. Please somebody help me, I'm loosing hope.
I think the only good news is that the "Media Tek PreLoader USB VCOM" still works, and looks like phone cooperates with the tool, maybe I should use different tool, or test phone first with some tool, or create partitin table ?
Click to expand...
Click to collapse
somebody please help
there are away by sd card if anyone can plz pm me umor.raihan skype
Thank you very much, it unbrick the phone and add Arabic language
there is Arabic language in it .
this is not working for me what exactly is supposed to happen when you plug in phone?
hi guys sorry in the future for my text that i will be typing because i think my english will be bad...but guys ... i have a problem... i bought an oukitel wp6 6gb ram + 120 gb in that it came with an unofficial rom being on android 10... i wanted to root it... it bootlooped i then psyched the stock rom it... and I lost mei imei after a few days I managed to install a "stock" from the oukitel website and managed to root it... but I still have no imei... I've tried muhai... sn write but when I blink they the computer doesn't recognize the cell phone even it turned off with the volume down button and the mtk and vcom csc drivers etc installed... someone give me a light pls...