So it seems like phone which is updated to official Lollipop is bootloader locked and root and stuff not available
whats the scene with kitkat phones.
can we install custom roms. main recovery or rely on safestrap?
can we install all the available roms for i545 or specifics only
Im going to buy one tomorrow either this or i9505, so want to pick better one
faheemakbar18 said:
So it seems like phone which is updated to official Lollipop is bootloader locked and root and stuff not available
whats the scene with kitkat phones.
can we install custom roms. main recovery or rely on safestrap?
can we install all the available roms for i545 or specifics only
Im going to buy one tomorrow either this or i9505, so want to pick better one
Click to expand...
Click to collapse
If you buy a Samsung Galaxy S4 SCH-I545 phone with Lollipop 5.0.1 or later installed or take the OTA update to Lollipop 5.0.1 or later, you will be locked into the OC1 bootloader. Since there still is not a ROOT exploit available for OC1, you will not be able to ROOT, revert to a previous level ROM or load a custom ROM with OC1.
If the phone has KitKat NK4 Bootloader or prior is a workaround to update to Lollipop 5.0.1 and stay on the NK4 Boot Loader
http://forum.xda-developers.com/gal...-to-update-to-i545oc1-5-0-1-keeproot-t3096558
Using this process will allow you to ROOT and install other ROMS.
With KitKat NK4 Bootloader or prior you can use Odin to revert back to the NC5 Bootloader, Root, install Safestrap and flash any Safestrap compatible ROM for the I545.
FYI, I use the Empty Galaxy Rom http://forum.xda-developers.com/galaxy-s4-verizon/development/rom-empty-galaxy-v1-5-t2968567 It has no Samsung or Verizon Bloat and has excellent battery life.
I figured out how to unlock my recovery on rooted sch-i545 on of1 5.0.1
---------- Post added at 11:39 AM ---------- Previous post was at 11:27 AM ----------
Run script: system/bin/uncrypt
In root explorer make sure and mount r/w.
Find : system/bin
At the bottom of the bin file find
uncrypt press and choose exicute script.
The phone will auto boot into stock recovery.... Choose to reboot and your recovery will be permanently unlocked.
Feel free to shut off and boot to recovery as many times as you like. Now install custom recovery, roms, xposed framework and so on
rebelknight84 said:
I figured out how to unlock my recovery on rooted sch-i545 on of1 5.0.1
---------- Post added at 11:39 AM ---------- Previous post was at 11:27 AM ----------
Run script: system/bin/uncrypt
In root explorer make sure and mount r/w.
Find : system/bin
At the bottom of the bin file find
uncrypt press and choose exicute script.
The phone will auto boot into stock recovery.... Choose to reboot and your recovery will be permanently unlocked.
Feel free to shut off and boot to recovery as many times as you like. Now install custom recovery, roms, xposed framework and so on
Click to expand...
Click to collapse
If only it were this easy! Unfortunately, I fear following this advice may hard-brick my phone!! :crying:
---------- Post added at 09:34 AM ---------- Previous post was at 09:31 AM ----------
jwhistler said:
If only it were this easy! Unfortunately, I fear following this advice may hard-brick my phone!! :crying:
Click to expand...
Click to collapse
Having said that... both OC1 and OF1 have root exploits. Once that is accomplished, you can flash TWZ modified ROMS using Fireflash. See here... http://forum.xda-developers.com/galaxy-s4-verizon/development/stang5litre-ediition-5-0-t3132555
rebelknight84 said:
I figured out how to unlock my recovery on rooted sch-i545 on of1 5.0.1
---------- Post added at 11:39 AM ---------- Previous post was at 11:27 AM ----------
Run script: system/bin/
Click to expand...
Click to collapse
I recommend you edit your post and remove this 'guide' as it is not true
Yes please no one do this. This information is incorrect.
Sent from my stang5litre Edition 5.0 v3
Related
got this phone since 10/1/13 rooted it and have looked everywhere:silly: yout*be,forums and im bout to loose itjust trying to find out how to install this DOPE recovery on my GS4 I545 thanks in desperation Mode now!:crying:
What Rom version are you on?
If its ME7 than you have to use SafeStrap.
Otherwise read this http://forum.xda-developers.com/showthread.php?t=2322675
[Verizon Galaxy S4][CWM Advanced Edition] PhilZ Touch
Sent from my Nexus 7 using Tapatalk 2
https://www.dropbox.com/s/31lieedcnby94gk/philz touch new.zip here is a lokied version of philz touch ready to flash in recovery, thanks philz for the wonderful recovery
hyperdrive powered s4
---------- Post added at 07:17 PM ---------- Previous post was at 07:11 PM ----------
Its the new 5.18.2 release
hyperdrive powered s4
---------- Post added at 07:26 PM ---------- Previous post was at 07:17 PM ----------
Only if on mdk
hyperdrive powered s4
ebsk8er06 said:
https://www.dropbox.com/s/31lieedcnby94gk/philz touch new.zip here is a lokied version of philz touch ready to flash in recovery, thanks philz for the wonderful recovery
hyperdrive powered s4
---------- Post added at 07:17 PM ---------- Previous post was at 07:11 PM ----------
Its the new 5.18.2 release
hyperdrive powered s4
---------- Post added at 07:26 PM ---------- Previous post was at 07:17 PM ----------
Only if on mdk
hyperdrive powered s4
Click to expand...
Click to collapse
is this going to work on my ME7? thanks in advance
aldroid said:
is this going to work on my ME7? thanks in advance
Click to expand...
Click to collapse
You cant flash a custom recovery on me7, your only option for romming is safestrap.
Hit thanks if I helped you out. Doing a little bit of reading goes a long way. Sent via tapatalk. now Free
Does not work on me7 with safestrap only works on Loki bypass on mdk
hyperdrive powered s4
ebsk8er06 said:
https://www.dropbox.com/s/31lieedcnby94gk/philz touch new.zip here is a lokied version of philz touch ready to flash in recovery, thanks philz for the wonderful recovery
Click to expand...
Click to collapse
I've got an MDK S4 that I rooted using this method: http://forum.xda-developers.com/showthread.php?t=2290798
I read the entire thread about the Verizon version of PhilZ Touch you Loki patched, ebsk8er06, but it's still unclear. It says I should be running a tar.md5 file in the PDA section of Odin, but this is a zip file. I can't seem to find anything Odin recognizes from this zip file (either zipped or unzipped).
I'm confused.
I don't know if any of this is pertinent, but here are some specs;
Android version: 4.2.2
Baseband version: I545VRUAMDK
Kernel version: 3.4.0-562219
Build number: JDQ39.1545VRUAMDK
Thanks!
2982833546
Bump...
quilope said:
I've got an MDK S4 that I rooted using this method: http://forum.xda-developers.com/showthread.php?t=2290798
I read the entire thread about the Verizon version of PhilZ Touch you Loki patched, ebsk8er06, but it's still unclear. It says I should be running a tar.md5 file in the PDA section of Odin, but this is a zip file. I can't seem to find anything Odin recognizes from this zip file (either zipped or unzipped).
I'm confused.
I don't know if any of this is pertinent, but here are some specs;
Android version: 4.2.2
Baseband version: I545VRUAMDK
Kernel version: 3.4.0-562219
Build number: JDQ39.1545VRUAMDK
Thanks!
Click to expand...
Click to collapse
Download goomanger have it install twrp and then just flash that file in twrp
Sent From My Hyperdriven S4
---------- Post added at 04:23 AM ---------- Previous post was at 04:22 AM ----------
My package cant be odined it is ment to be flashed in a recover
Sent From My Hyperdriven S4
---------- Post added at 04:26 AM ---------- Previous post was at 04:23 AM ----------
Or you can download rom manager and have it install cwm and then flash my zip file in it
Sent From My Hyperdriven S4
ebsk8er06 said:
Download goomanger have it install twrp and then just flash that file in twrp
Sent From My Hyperdriven S4
---------- Post added at 04:23 AM ---------- Previous post was at 04:22 AM ----------
My package cant be odined it is ment to be flashed in a recover
Sent From My Hyperdriven S4
---------- Post added at 04:26 AM ---------- Previous post was at 04:23 AM ----------
Or you can download rom manager and have it install cwm and then flash my zip file in it
Sent From My Hyperdriven S4
Click to expand...
Click to collapse
Not trying to be difficult, just trying to understand things, here. Maybe I'm just confusing myself, but I feel like I'm getting conflicting information here: http://forum.xda-developers.com/showthread.php?t=2201860
The #4 post by Phil3759 on that page says this;
How to Install
This will depend on your device. Please look first for help in your device specific thread.
Provided instructions here ARE NOT VALID for all phone
Recovery (.zip) packages instructions
They come in the form of .zip files that can be flashed in cwm recovery
Click to expand...
Click to collapse
and
Odin packages instructions: Samsung Only
They come in the form of .tar.md5 file
Click to expand...
Click to collapse
I'm just trying to be cautious here, because I don't really understand all the things I'm doing (or why I'm doing them).
Thanks again for the help.
quilope said:
I've got an MDK S4 that I rooted using this method: http://forum.xda-developers.com/showthread.php?t=2290798
I read the entire thread about the Verizon version of PhilZ Touch you Loki patched, ebsk8er06, but it's still unclear. It says I should be running a tar.md5 file in the PDA section of Odin, but this is a zip file. I can't seem to find anything Odin recognizes from this zip file (either zipped or unzipped).
I'm confused.
I don't know if any of this is pertinent, but here are some specs;
Android version: 4.2.2
Baseband version: I545VRUAMDK
Kernel version: 3.4.0-562219
Build number: JDQ39.1545VRUAMDK
Thanks!
Click to expand...
Click to collapse
If you are comfortable using Odin then go to the link below. Several builds are there; "jfltevzw.tar.md5" file type is what you are looking for:
http://d-h.st/users/philz_touch/?fld_id=18376#files
hi!
yesterday i tried to root my internetional i9300 device with android 4.3 on it. after i root it, i noticed that the guide ment to be for android 4.1.2, so now when im trying to open supersu it says that there is no binary system files and shuts down. i have looked for this problem on the internet with no success. the only thing i know is that it because i have adroid 4.3.
please help...))) :::
do a factory reset from recovery panel ,in case flash stock firmware via odin
---------- Post added at 01:17 PM ---------- Previous post was at 01:15 PM ----------
and follow this guide http://forum.xda-developers.com/galaxy-s3/general/howto-rooting-wiping-flashing-ultimate-t1911726
i just succeed in getting into the custom cwm
alecore said:
do a factory reset from recovery panel ,in case flash stock firmware via odin
---------- Post added at 01:17 PM ---------- Previous post was at 01:15 PM ----------
and follow this guide http://forum.xda-developers.com/galaxy-s3/general/howto-rooting-wiping-flashing-ultimate-t1911726
Click to expand...
Click to collapse
can i just put a new rom?
dok1230 said:
can i just put a new rom?
Click to expand...
Click to collapse
If you are intending to flash a new custom rom staight away their is no need to root your phone because custom roms come already rooted.Also if you install PhilZ recovery it as a option to fix root in settings just select the option reboot then download supersu from play store done.
Can anyone guide me to update me verizon S4 4.3 to 4.4 kitkat . I am on MK2 bootloader. I haven't find any complete method to update my phone to 4.4. So far i was only successful in rooting my phone and installing Safestrap 3.71 on my phone. Now next i need a 4.4 rom that is compatible to my phone. Plz help and suggest a method with rom.
tusifpk said:
Can anyone guide me to update me verizon S4 4.3 to 4.4 kitkat . I am on MK2 bootloader. I haven't find any complete method to update my phone to 4.4. So far i was only successful in rooting my phone and installing Safestrap 3.71 on my phone. Now next i need a 4.4 rom that is compatible to my phone. Plz help and suggest a method with rom.
Click to expand...
Click to collapse
Here you go!
http://forum.xda-developers.com/showthread.php?t=2301724
You select the safestrap option during the Aroma install.
Thought for HD you have to be on the nc5 bootloader, has that changed since the original kk version?
rrrrrrredbelly said:
Thought for HD you have to be on the nc5 bootloader, has that changed since the original kk version?
Click to expand...
Click to collapse
Sbreen94 has a repository of earlier versions available. Not sure but I think you may have to update from JB to KK from stock, re-root, then safestrap and flash.
---------- Post added at 09:18 PM ---------- Previous post was at 09:15 PM ----------
Also, this.
http://forum.xda-developers.com/showthread.php?p=56098565.
I would really appreciate assistance.
I followed the steps in http://forum.xda-developers.com/xper...8-pre-t3205929 and my phone will not start.
I don't currently have the ability to try flashing an FTF but I will be attempting to do so once I get home from work - I will try flashing https://www.androidfilehost.com/?fid=24052804347818113.
Prior to having this issue, I had a fully rooted 5.0.2 that was fully functional.
Will I need to first install Kitkat to root my phone or will I be able to flash the FTF and keep the existing root? I could follow http://forum.xda-developers.com/xper...5-0-2-t3094094 instead?
If someone could give me a quick guide as to what I need to do at this point to have fully functional root again, I would really appreciate it.
Unlocked or locked bootloader?
Locked.
I just had exactly the same problem with the same rom - really a waste of time. Ended up downloading through Xperifirm and building both 4.4.4 and 5.1.1 roms myself. Wasted a lots of time restoring lost data also.
You have to go back to Kit Kat, install dual recovery then flash the latest prerooted Lollipop. Just use the more tested roms for C6833 if you can't build one yourself.
---------- Post added at 01:10 PM ---------- Previous post was at 01:05 PM ----------
You can also just flash the stock ftf without having to wipe all the data, in order to back up or recover everything you want.
tnthd2 said:
I just had exactly the same problem with the same rom - really a waste of time. Ended up downloading through Xperifirm and building both 4.4.4 and 5.1.1 roms myself. Wasted a lots of time restoring lost data also.
You have to go back to Kit Kat, install dual recovery then flash the latest prerooted Lollipop. Just use the more tested roms for C6833 if you can't build one yourself.
---------- Post added at 01:10 PM ---------- Previous post was at 01:05 PM ----------
You can also just flash the stock ftf without having to wipe all the data, in order to back up or recover everything you want.
Click to expand...
Click to collapse
Can you show the step of solving this problem.
There's already thread with detailed guide for rooting 5.0.2 (in the OP also):forum.xda-developers.com/xperia-z-ultra/general/guide-root-z-ultra-stock-lollipop-5-0-2-t3094094.
There's also a better instruction here: techbeasts.com/2015/04/18/root-xperia-z-ultra-c6802-c6833-c6806-14-5-a-0-242-5-0-2-lollipop-firmware/
For rooting 4.4.4, just install the NUT's dualrecovery which will root it, no need for a separate step. For 5.1.1, if you want to build the flashable zip, get the ftf from the androidhost link above, or use Xperifirm.
So here are the steps:
.Download the 4.4.4 ftf (for C6833 will work) and flash it using flashtool.
.Install dualrecovery using the install.bat.
.Get a tested prerooted zip for 5.1.1 and flash in TWRP.
.Or download stock 5.1.1 ftf to build a prerooted flashable zip with PRFCreator then flash in TWRP.
Good luck.
tnthd2 is correct, you have to follow the instructions exactly.
it took me two goes flashing the 5.1.1. prerooted .zip and then the FTF, the first time I got a boot loop.
Hello everyone,
I updated to the latest version 6.0.1. 572
I also unlocked the Bootloader and rooted with King root (Temporary root)
But what I can't boot to the stock recovery, and whenever I try to, it automatically boots to system
And I tried to install twrp, I ended up getting it soft bricked and I had to reinstall lastest firmware
So, is there any way I can install a custom recovery?
Thanks
Do not use standalone recoveries at the moment. Use ROMs that has recovery else you'l end up in bootloop.
For now, rcovery fix is an issue with 6.0.1. So i suggest you simply stick with a ROM like Existenz MM V1 or any other, by downgrading and installing recovery with root AND then flashing 6.0.1(with recovery & root). That way you can have recovery.
I too am waiting for a recovery fix so just managing without recovery for now as non of the fixes are working for me.
Good Luck buddy!
XDA
"Xcites: Develop: Achieve"
---------- Post added at 11:29 PM ---------- Previous post was at 11:26 PM ----------
Or...
Use a custom kernel.
You will have recovery and much more.
XDA
"Xcites: Develop: Achieve"
nagaGuy said:
Do not use standalone recoveries at the moment. Use ROMs that has recovery else you'l end up in bootloop.
For now, rcovery fix is an issue with 6.0.1. So i suggest you simply stick with a ROM like Existenz MM V1 or any other, by downgrading and installing recovery with root AND then flashing 6.0.1(with recovery & root). That way you can have recovery.
I too am waiting for a recovery fix so just managing without recovery for now as non of the fixes are working for me.
Good Luck buddy!
XDA
"Xcites: Develop: Achieve"
---------- Post added at 11:29 PM ---------- Previous post was at 11:26 PM ----------
Or...
Use a custom kernel.
You will have recovery and much more.
XDA
"Xcites: Develop: Achieve"
Click to expand...
Click to collapse
Well, thanks for the help, downgraded to 5.1.1 (or should I downgrade to something more older?)
But I need help to choose a custom kernel (I know how to flash kernels using fastboot ) can you suggest me a kernel that has a custom recovery
Sent from my D6503 using Tapatalk
5.1.1 is fine as you can root it. Just install Recovery( nuts dual recovery/ choose your version carefully & Follow instructions). if you'r going to upgrade to 6.0.1, i would suggest this kernel -http://forum.xda-developers.com/showthread.php?t=2965480.
Just follow the instructions carefully and you'l be fine.
BTW, if you only want recovery, you can easily install in 5.1.1 after geting it rooted using kingroot.
XDA
"Xcites: Develop: Achieve"
nagaGuy said:
5.1.1 is fine as you can root it. Just install Recovery( nuts dual recovery/ choose your version carefully & Follow instructions).
Click to expand...
Click to collapse
Done, thanks!
After converting from kingroot to SuperSU (permanent root) and flashing dual recovery, then flashing a prerooted 6.0.1 ROM, now I have everything I need :good: :victory: