hello
i have some problems with a rom based in Cyanogen 7 ( it's no official)
the keyboard is small...
there is in some way to modify it and make it bigger?
another thing is that i would like to pass apks from my pc to my htc wildfire s but there's no way the system android don't detected them
the good things is that I got 2.00 GB of free internal memory and is supposed it was installed directly to the sd , so I would like to improve and not change the rom
to prevent spam i can't put the link to download the rom , so the person who was interesed please send me a message
the rom is from another foro in spanish called htcmania
someone could help me?
thanks a lot !
The Keyboard can be changed by searching for another keyboard.apk for your phone, U can update it with google Play, or Aptoide.
Then the app problem, so you can't copy apks to your phone? and your phone doesn't install apps to sd?
Try the app:
apps2sd
or
connect your phone with your computer, install adb drivers
type in your path to yourAndroid SDK installation at Step 1:
Step 1: cd C:\android-sdk-windows\platform-tools
Step 2: adb devices (it should say there's a device listed when your phone is connected!)
Step 3: adb shell
=> A $ sign should pop up
Step 4 :pm setInstallLocation 2 (or, new syntax : adb shell pm set-install-location 2)
Another $ should pop up
MrMaddTraxx said:
The Keyboard can be changed by searching for another keyboard.apk for your phone, U can update it with google Play, or Aptoide.
Then the app problem, so you can't copy apks to your phone? and your phone doesn't install apps to sd?
Try the app:
apps2sd
or
connect your phone with your computer, install adb drivers
type in your path to yourAndroid SDK installation at Step 1:
Step 1: cd C:\android-sdk-windows\platform-tools
Step 2: adb devices (it should say there's a device listed when your phone is connected!)
Step 3: adb shell
=> A $ sign should pop up
Step 4 :pm setInstallLocation 2 (or, new syntax : adb shell pm set-install-location 2)
Another $ should pop up
Click to expand...
Click to collapse
i installed a new keyboard and the adb drivers but the problem with the apps continues i mean i can't copy apks download from my pc to my phone with a modified rom, the phone doesn't detected them.
for example i tried to download and put in my phone some apk who play store deleted for obvious reasons it is droidsheep XD
however i can download and install apks who are in play store , it is strange...
thanks for your reply ^^
Did you turn on unknown sources in Settings>Security settings ? This allows you to install apps which are not from the play store...
If this is not the issue, you should check google settings( the grey cog with a g in it ), google got this feature which blocks apps, there should be a function in these settings which stops checking your apps that you install.
MrMaddTraxx said:
Did you turn on unknown sources in Settings>Security settings ? This allows you to install apps which are not from the play store...
If this is not the issue, you should check google settings( the grey cog with a g in it ), google got this feature which blocks apps, there should be a function in these settings which stops checking your apps that you install.
Click to expand...
Click to collapse
okey , i will check the google settings , anyway i am sick of this rom ... some apps like google play are continually restart
and a few days later I have noticed that the apks who i want to install from the google play (when it's installed ) restart the phone
that rom have some bugs...
thanks for the reply , but i will not continue with this rom , i make another post asking how i can change modified rom to oficial rom in the htc wildfire s , i don't find anything for this phone in google ...
thanks a lot ^^
Allright, well the problem could lie in your gapps, a corupt google play service can cause alot of trouble and Force Closes on your phone, also when you installed yothe mod, did you wipe everything? (Dalvik cache, Data, cache ...) Don't have the phone so can't test anything, might do some research tho
good luck further!
MrMaddTraxx said:
Allright, well the problem could lie in your gapps, a corupt google play service can cause alot of trouble and Force Closes on your phone, also when you installed yothe mod, did you wipe everything? (Dalvik cache, Data, cache ...) Don't have the phone so can't test anything, might do some research tho
good luck further!
Click to expand...
Click to collapse
yes , about the custom rom i wipe everything so i think that was a fault from the chef T_T
pd: do you know how i can change modified rom to oficial rom in the htc wildfire s ?
thanks for your reply again :fingers-crossed:
Well I don't really understand what you mean, but the thing I understand out of it is that you want to go back to a stock Firmware or Rom?
I'd recommend backing everything up firstly (don't forget all your contacts!) .
Then go into recovery and do a factory reset / or Data, Dalvik cache & cache Wipe... (system should be wiped for modified stuff like battery improvements, added scripts, etc. ...)
& that's it for going back to your stock rom.
If you want to go back to stock firmware you should search what type of phone you have (the nickname , single sim or dual sim , all this) and look for stock firmware (.ftf Files)
To get this flashed on your phone you gotta use a flash tool and a computer.
For further information you should read some tutorials on how to flash firmware.
MrMaddTraxx said:
Well I don't really understand what you mean, but the thing I understand out of it is that you want to go back to a stock Firmware or Rom?
I'd recommend backing everything up firstly (don't forget all your contacts!) .
Then go into recovery and do a factory reset / or Data, Dalvik cache & cache Wipe... (system should be wiped for modified stuff like battery improvements, added scripts, etc. ...)
& that's it for going back to your stock rom.
If you want to go back to stock firmware you should search what type of phone you have (the nickname , single sim or dual sim , all this) and look for stock firmware (.ftf Files)
To get this flashed on your phone you gotta use a flash tool and a computer.
For further information you should read some tutorials on how to flash firmware.
Click to expand...
Click to collapse
i was talking about the firmware , but i called it oficial rom sorry xD
in a spanish foro called htcmania the moderator told me: You can only install an equal or higher version .
the rom has a version 2.3.7 and the firmware that i would like to install has a 2.3.5 version
anyway, there was a tutorial who explain how downgrade the version of the rom?
thanks ^^
Well you can downgrade, if it is availble for your phone... Better so some more research regarding your phone and just try it.
Related
hello gentlemen
i bought my viewpad 7 last week. after digging this forum i tried to root my tablet with super one click but i was unable coz it stuck in screen and happen nothing somehow i tried gingerbreak and it worked. as i am totally newbie in android os and i have no idea on programming. but the most important thing is clockwork recovery i saw couple of youtube videos and tried working but ended up with error . i dont know how to setup adb on my pc so i tried terminal emulator but no keyboard.. tried qtadb but show me '' permission denied'' now i am pulling my hair off. i have got rom manager installed on my tablet but whenever i ty to install update.zip it say signature error or somthing (i have got custom rom in my sd and renamed to update zip also i have clockwork recovery img and flash recovery) the only thing i need is a working terminal emulator as i have no idea on comand from pc.
so is there anybody who can give me a easy tutorial or make a video to demonstrate how can i get clockwork recovery installed also custom rom i would be really really greatful
hope someone saves me...
Hello & welcome, there's no need to panic but definitely - very important to be patient, set aside at least half a day or more, and, read - read - read. Take notes as you go along & do NOT rush.
If you have not gone thru this sticky, please do so - http://forum.xda-developers.com/showthread.php?t=1236990
Sticky #1 is mandatory reading to take full advantage of the Vpad7 so that you can understand the basics, describe your Vpad's hardware & build information, etc. and how to press various buttons, go back, reset & get into Recovery and Bootloader. Without knowing it, you are prone to run into problems.
First, you need to check & make sure that your CWM (which verison) is properly installed & working (and, if so) - check under the Advanced submenu to verify "Signature Verification" status.
Do you have an "older" non-ITE or "newer" ITE multi-touch screen device, which determine which custom ROM can be used? Be specific, please ...
Generally speaking, there is no need to rename a downloaded ROM's zip file to update.zip for flashing ... so I suggest that you do more reading first.
Do you have USB debugging turned on? Applications - unkown sources turned ON to allow installation of non-Market apps? A working knowledge is essential to avoid (soft) bricking your device by being able to understand the process for Flashing - start here http://forum.xda-developers.com/wiki/Flashing_Guide_-_Android
There's nothing simple & easy about all these, sorry - time & patience is a requirement to get everything working together. Look under the "Development" section for how to install ROM & the issues involved - there are just a handful of ROMs and you don't need to spend a hundred hours going thru all of them, a few hours of reading will do - a 10 minute Youtube video isn't going to do it. The best person to "save" you is you - YMMV. Regards.
thanks a million i finally made it. i used rom manager to install un official clockwork recovery and did install custom rom however i need one more final solution i was trying to get app2sd but my rom maker said it is built in inside the rom just need to creat ext3 but i guess i cant do that without comand so again is there any manual method to do that i saw an option on rom manager but it offers only 512mb partition but i want more may be 8 gb or 4gb i have 16gb sd card.. so can u help me pls...
and i yes i had usb debug on. unknown source on
big_b0sss said:
... i used rom manager to install un official clockwork recovery ... custom rom however ... app2sd ... is built in inside the rom just need to creat ext3 but ... without comand ... rom manager ... offers only 512mb partition ... may be 8 gb or 4gb i have 16gb sd card..
Click to expand...
Click to collapse
1. Rom manager - I do not use them on my Android devices but if you are comfortable with it and help simplify your tasks & learning curve, good for you. Remember to backup, backup & backup your work & save it to more than one location - those "oops" happened to all of us, sometimes (and, at the worst time - Murphy's Law 101)
2. You only need a few files in its own sub directory or folder to properly run adb and busybox, and, to run the (good old DOS) command prompt from your PC - just need to type the commands carefully. Alternatively, Terminal Emulator (with or without the shell or user interface) can be downloaded from Android Market to the Vpad7 to install & run (it's not pre-loaded) with SU enabled ... (more reading for you on how-to's)
3. Not sure if you are referring to App2SD in Market (quite a few out there) or DT's A2SD and A2SDGUI in some of the custom ROM. Vpad7's custom ROM recommend 1 MB SD ext3/partition in general (ext4 is more advanced and challenging) - there is no need, advantage or benefit in a 2GB or 4GB ext3 with a 16GB mSD card (as you are allocating/reserving unused space that you cannot dynamically changed or reassign later on as you begin to run low on "general" storage space on the card - PLUS, you will have to reformat the card & wipe/lose everything on it, until it's restored from saved backup)
FYI - I keep the last 3 to 5 CWM Backup images/files on the mSD card and it's close to 3GB in size already, not counting pix, mp3's and saved videos.
4. Older version of CWM Recovery worked best for me in repeated ROM flashing & setup to partition/format the mSD, verison 5.0.2.6 can work but the newest one posted 5.0.2.7 did NOT work for me - YMMV, of course. Refer to the one in Cleanviewpad7 V1.0 and its instructions or EU Vapd 7 V1.7b - as I'm guessing from your description that your device is a newer ITE multi-screen hardware build. KWBR V3.2 ROM works with ITE and has the newer kernel and A2SD is easy to use per installation guide - it's lean & stripped of non-essential apps.
Have patience, backup & have run !
thanx again for ur reply but i dont know why i do not get keyboard on my terminal emulator. i tried to put comand through terminal emulator but due to keyboard issue i cant i also tried dos but i have no knowledge on that. can u make a video for me or a tutorial how can i get a2sd work on my vpad 7
thanks again
big_b0sss said:
... dont know why i do not get keyboard on my terminal emulator. i tried to put comand through terminal emulator but due to keyboard issue i cant i also tried dos but i have no knowledge on that.
Click to expand...
Click to collapse
First, as I asked before, we do NOT know which ROM you are trying to use?
But, I'm going to guess - since I've flashed all of the working ITE ones here, and you are using KWBR v3.x - and, if so, please confirm or verify, yes or no.
If so, I had issues with its keyboard not showing up in terminal emulator, and there are different reasons for it - namely, including the OP developer's choice of installed KB. However, as a workaround - by running adB/busybox from Windows Vista's command prompt, I can execute instructions to re/mount, reboot, etc.
By installing a different KB & switching to it, it worked under terminal and I can run command prompts directly. There is a learning curve involved here - not something to rush, rather steps by steps - there are "stickies" in the threads and I do not want to further clutter up excellent guides already written up, 6 to 9 months plus ago - which I took time to read, follow & work with. I encourge you to do so as well.
My advice, the easiest to do, is to install & start with a different ROM - Cleanviewpad ROM is basic, simple & easy to install, virtually "bug" free and I suggest that you start with that. KB worked directly as a toggle, popping up from terminal emulator, and you can run commands from it.
Once you are comfortable & has everything working, you can optimize your A2SD and move apps from internal storage to mSD card, etc. and progress to the next level - EU Vpad 7 V1.7b ITE ROM is nice but from experience and reading the thread's posts, some "beginners" lacking knowledge & skills have trouble with it. By running a # of patches, I get it updated to the latest and it's running optimized to my personal liking - it's not entirely difficult to learn but not for someone completely new to Android OS.
Here's a link that you could've google right here in XDA - guide to ADB - bookmarked the link for you, please search for other guides, thanks
http://forum.xda-developers.com/showthread.php?t=879701
hi there thank you so much for helping me again and yes i am using kwbr rom because i have tried cleanviewpad 7 but stuck at welcome screen doesnt work anything then tried lakehouse froyo enhanced but link disabled so stuck with this rom.. i really wish i cloud post on dev section coz im kinda stuck with this post..
but hey if u dont mind and if u have froyo enhanced rom can u upload that for me or give me a working link...
sorry for bothering u but would appreciate
Still waiting for a ROM for Viewpad 7e. Anyone know of one in development? Even the stock ROM bundled with CWM would be good so that we would have the ability to do a Nandroid backup.
Sent from my SPH D700 using XDA App
Cyanogen Mod 9.4, Shadow kernel, EI22. I like my Ice Cream Sandwich!
big_b0sss said:
... using kwbr rom because i have tried cleanviewpad 7 but stuck at welcome screen doesnt work anything then tried lakehouse froyo enhanced but link disabled ... and if u have froyo enhanced rom can u upload that for me or give me a working link...
Click to expand...
Click to collapse
Are you making good progress after rooting with custom ROM, learning a bit more about using adB and terminal emulator? I searched my storage bins for what I've kept for the Vpad7 - and I have NO luck yet finding the Froyo enhanced ROM. I did uploaded the EU V1.7b ITE custom ROM to Dropbox, along with the a2sd*.zip file (just in case, you are comfortable & ready to try - after backing things up) The A2SDGUI app is available in Market, just search & download & install up once the EU V1.7 ITE ROM is up.
A2SD does NOT need to be working for the ROM to do its basic functions, just that it will soon run low on internal storage/memory and that's where A2SD come in. If you find it useful, do a CWM backup first , then use the earlier version of CWM to reformat the mSD card again (thus, wiping it clean) and setup a 1MB ext3 partition per detailed instructions. Reboot & reconnect USB, and move/restored all of your saved files/folders/settings, etc. back to the mSD drive.
Next, flash the A2SD program by DT again just to be sure from Recovery - and then Restart into Recovery. Wipe cache & dalvik and boot up again - cross your fingers and A2SD should be up & running - check it with A2SDGUI and/or Titanium Backup will display various memory/partition/storage space & usage (used/free & total)
http://dl.dropbox.com/u/64025118/EUViewpad7v1.7b-ITE.zip
http://dl.dropbox.com/u/64025118/apps2sd-2.7.5.3-dt.beta04-signed.zip
Again, I am and will be be responsible for anything if something goes wrong by using & flashing these zip files, they are unchanged or unaltered as I originally downloaded them. I'm simply posting them with the mess created by the multi-upload servers being offline, etc. as many folks are completely at a loss for what to do next. Full credits go to the OP/xda-developers for creating their masterpieces. If you are not comfortable or unsure, please do not proceed or assume the risk - the stock ROM, especially unrooted, isn't bloated by any means at all. There is NO over-clocking at this point for any ITE kernel for the Vpad7, period - none that I know of. Folks, do NOT confuse or try this with Vpad7e (which is a different device, sorry - cannot help at all)
Regards & do post with your results and share, and, if I can help further with the specifics, will be glad to do so.
about the euvpad rom
hi there i am glad that u sugested me that rom but before i try to do anything i just want to ask that which rom is better, im asking u coz u might know as u have tried diffrent rom. i am currently having no issue with kwbr rom however somtimes lag and slowness i know its bocoz vpad has only 600mgh processor so does euvpad rom faster or is there any good thing just wondering...
if euvpad rom is better i will go ahead and intall it.. so kind of waiting on ur reply
big_b0sss said:
hi there i am glad that u sugested me that rom but before i try to do anything i just want to ask that which rom is better, im asking u coz u might know as u have tried diffrent rom. i am currently having no issue with kwbr rom however somtimes lag and slowness i know its bocoz vpad has only 600mgh processor so does euvpad rom faster or is there any good thing just wondering...
if euvpad rom is better i will go ahead and intall it.. so kind of waiting on ur reply
Click to expand...
Click to collapse
Personally, I prefer and continue to use EU V1.7b for ITE, it has support for European languages as well as Asian languages. KWBR only support Euro language and the ROM is more "stripped" down with fewer apps, but it does work nicely "out of the box" with A2SD - downside being that internal memory/storage still seem to run low (once I re-install 50+ apps on my device)
For EU V1.7 - it's using an older version of Android Market, but can be easily updated if one wanted to, and, has a few more "basic" apps pre-installed including Documents To Go - and, by adding "Car Home" - I have a working 7" GPS device in the car when needed (sound volume is low, however due to those tiny stereo speakers) - I have been running it for 5+ months now, very smooth & few, if any, FC or freezes, and, Angry Birds running nicely on it, same with YouTube videos over WiFi connection (my 3G is on Edge network, so speed is SLOW and thus very choppy due to broadband speed, not CPU-related)
If you are running KWBR nicely now, do a Backup from CWM first, wipe cache/dalvik & system next - then flash the EU Rom and setup - to see whether you like it. And, if you do - follow the post's steps that I wrote up a while back and get A2SD running with the earlier verison of CWM for ext3 partition, restore/copy back all the files to the mSD card - and reboot/check for A2SD functionality, hopefully - it works without further tweaks - and I think you will like it.
If not, it's easy enough to get back into Recovery, wipe clean it first (very important to clear all traces) and RESTORE the KWBR image from the mSD, and reboot - and you can continue using it. Set aside 2 or 3 hours to do this slowly & right, and you will find the process educational & informative - and, as I always remind newbies - the rules are simple - Backup, Backup and Backup !!
Cheers & go have fun !
A new ROM download @huawei!
Anybody flashed it?
A final ICS Release?!?
http://www.huaweidevice.com/cn/downloadCenter.do?method=toDownloadFile&flay=software&softid=NDE1MDE=
Without root... I'm not sure I am willing to take the plunge. Would that same method employed on other leaks work? If so, I'll take the plunge...
musclendabx said:
Without root... I'm not sure I am willing to take the plunge. Would that same method employed on other leaks work? If so, I'll take the plunge...
Click to expand...
Click to collapse
If it doesn't root, couldn't you just downgrade to the older ROM? (I have no idea, so don't yell at me if I'm wrong )
not gonna do it without root...
I believe this is the Chinese version. I'm waiting for an International version with root. It shouldn't be long.
r34p3rex said:
If it doesn't root, couldn't you just downgrade to the older ROM? (I have no idea, so don't yell at me if I'm wrong )
Click to expand...
Click to collapse
Don't see why not... but not willing to take a chance... each device has its own idiosyncrasies and I don't know this one very well.
Root with B010 unsecure boot.img, no gapps so you need gapps patch too.
Works no problem.
Interesting. I really hope that we can soon run a real proper ICS build on MP.
This is probably dumb, but I downloaded and installed the 4.0 from Huawei, it ran beautifully, but 4g would not work on Tmo... so I went back to 3.2 and still no 4G.. anyone have any advice??
Difference band
Pitchdad said:
This is probably dumb, but I downloaded and installed the 4.0 from Huawei, it ran beautifully, but 4g would not work on Tmo... so I went back to 3.2 and still no 4G.. anyone have any advice??
Click to expand...
Click to collapse
I think s7-301 not for US. You need downgrade to S7-303 (another modem/ band)
I use this ROM (B015) with my 301u.
Yes, it's a Chinese Rom with f*ckin "chinapps".
We need to finalize it:
1. Make Root with mkroot_adb
2. Delete stock chinese apps with "Root explorer" or "ROM Toolbox" (free)
3. Install latest GApps (only you need)
4. Full Wipe
And We Have а "Stable firmware without the unnecessary programs & reboots"
5. Install "CPU Tuner" or any other program to control NRG use
6. Profit
We have Android 4 with long lasting battery
And, as always, sorry for my fu**ing horrible english
alexdrakea said:
I use this ROM (B015) with my 301u.
Yes, it's a Chinese Rom with f*ckin "chinapps".
We need to finalize it:
1. Make Root with mkroot_adb
2. Delete stock chinese apps with "Root explorer" or "ROM Toolbox" (free)
3. Install latest GApps (only you need)
4. Full Wipe
And We Have а "Stable firmware without the unnecessary programs & reboots"
5. Install "CPU Tuner" or any other program to control NRG use
6. Profit
We have Android 4 with long lasting battery
And, as always, sorry for my fu**ing horrible english
Click to expand...
Click to collapse
How to use mkroot_adb?
4.Full Wipe (means factory reset?) or I need to do something else?
Thanks
So catching back up after being gone for several weeks. I have the ICS b10 (I think) on my MP and am looking at the new builds here. Should I do the b15 listed here, or the HUAWEI_S7-301u_FIRMWARE_android4.0_C232B002_General_Channel_05010YBX-root Build listed in the other threads?
Code:
How to use mkroot_adb?
4.Full Wipe (means factory reset?) or I need to do something else?
1. Connect HMP to PC with Win & installed ADB Drivers (HiSuite)
2. Launch mkroot.cmd
3. wait for 3 reboots
Need for mkroot use:
1. Settings - System - Developer options - USB debugging - (on)
2. Settings - Personal - Security - Unknows sources - (on)
mkroot_adb:
English version of mkroot.cmd messages
Code:
If you see this too long to post it:
1. Make sure enabled "Debug on USB"
2. ADB drivers installed
3. The tablet is connected via USB
obtain the right to write to / data
Restart (1/3)
Make full access
Restart (2/3)
If the id is 0 / root then continue, otherwise ctrl + c to cancel and start over
Copying the files
Cleanup ...
Restart (3/3)
install Superuser.apk
All done!
Full Wipe: Yes, it's a factory reset
thanks!!!
Where is google play?
There's no google play app installed, when i install it manually it keeps closing when i open it!...
gmail too...
shpibrazz said:
There's no google play app installed, when i install it manually it keeps closing when i open it!...
gmail too...
Click to expand...
Click to collapse
OK.
Link: http://tinyw.in/Ko5N
Method:
1 - you need to have root for 3,4
2 - unpack gapps zip
3 - copy gapps to /system with ADB shell (with replace)
4 - clear cache & dalvik
5 - reboot
6 - Profit
When replacing the files, you can get one or two reboots.
Be careful and cautious.
Huawei website, easy to ...?
Still don't have ICS for my G300 though.
Anyone else need anything from Huawei? Might try and write some perl.
Looks like a non-upgrade version
Description
Enhances the wifi capabilities, provides a smoother web experience.
This looks like the official upgrade from 3.2, even says so.
Description
This is the official version to upgrade from android 3.2 to android 4.0.
db_bloke said:
This looks like the official upgrade from 3.2, even says so.
Description
This is the official version to upgrade from android 3.2 to android 4.0.
Click to expand...
Click to collapse
This is 3.2 C170B012 (though file named as B015) firmware, which (and only it) is capable to OTA upgrade to 4.0.3 C170B009, where most annoyances (green skype, copy/paste) are fixed.
skleroz said:
OTA upgrade to 4.0.3 C170B009, where most annoyances (green skype, copy/paste) are fixed.
Click to expand...
Click to collapse
C170B009 Full Sh!t
C170B008 have high stability
009 have 7 reboots/day
008 have 0 reboots/week
Hi guys,
That's a lot of text to read but when you guys advice me about that whole situation it can serve other people to plan and make their phone flashed without bricking it.
I need your opinion and advice on my move from Jelly Bean to KitKat. I have Lenovo P780 (China version) bought before 03.2014. My ROM is VIBEROM_V1.0_1347_3_ST_P780.
In general i'm happy with this rom, but after so long time of using it I would like to change it to more faster KitKat. And I would like to stick with VIBEUI because as i've said i'm happy with it. So I chose the newest: VIBEUI_V2.0_1512_7.149.1_ST_P780. I know it has only english and this other language but I don't use my native language even now when i have that option. Is it worth to flash it? Some people said about earlier version of kitkat it was buggy, and that JB is more stable than KK, but now after so much time of development it should be ready to smooth usage, right?
What I've done already:
I have istalled driver for preloader, lenovo usb drivers and adb drivers and then rooted with Kingoroot (of course on developer state and enabled usb debugging).
Then I made my copy of ROM through mtk droid tools, so I have istalled supersu but only for binaries (because mtk droid demanded them), then istalled busybox (from google play and hit install inside an app). And then I made copy of rom in mtk droid tools. But first hit „root” and then made backup, which was done without any error and is also prepared for SP Flash Tool. (I had trouble with backup because it ended with error but it was due to my default write disk in lenovo which was set on external storage, so mtk droid was writing image of ROM on built-in storage, which is, as you all know, very small, so i've changed default write disk and i was good to go).
I have done also backup of imei and nvram through mtk droid tools and backup of imei through mobile uncle tools.
THAT'S ALL I HAVE DONE. I didn't do anything besides this.
So first question: Is this enough? I mean root, drivers, backup of rom and imei.
Second question: What about „locked bootloader”? I've read a lot but in case of Lenovo P780 i've never read anything on locked bootloader besides one site but i can't insert url on my post because i'm new
So do I need to do sth with bootloader or it is unnecessary?
Next flashing: For downloading rom I used rather the most popular site with roms: needrom. I downloaded VIBEUI_V2.0_1512_7.149.1_ST_P780_OLK_W_3D22.zip. In this site is also scheme how to flash it. They say this stock rom should be flashed through CWM (I downloaded this recovery from their site):
Step 1: Download the custom ROM copied to an external SD card root directory
Step 2: the shutdown state. While holding down:
– Power button + volume button up, to enter the recovery mode.
– Wipe Data / Factory Reset -> delete all user data
– Wipe Cache Partition -> Wipe cache
– Advanced -> Wipe Dalvik Cache
Step 3: Return to recovery main interface Install zip from sdcard -> choose zip from sdcard -> Select your ROM
Step 4: Brush complete, restart the phone Patience required – first boot takes a while
Is this complete scheme? Because in xda i've found other way:
Install Vibe ROM, same as step 4 and then:
Step 5. Install Gapps
Step 6. Install SuperSU
Step 7. Wipe data/cache (Factory Reset) and reboot. Done
Sorry for carefullness but i don't want to brick my lenovo and it's better to ask with stupid questions than don't ask and flash. Also my brother had lenovo s650 but after conneting charger with electric socket it burned → then send on warranty to china --> then nothing... So... yeah i'm cautious.
I'm planning to flash cwm from needrom (same page as for stock rom) through mobile uncle tools (of course i will backup my contacts and other stuff). Or maybe it's better to create cwm recovery through mtk droid tools?
Then flash new vibe ui. Should I done this way or is it better other way? Like using stock revovery (but phone is rooted, i know i can remove root but i don't know if this rom is modded in any way so xda users didn't recommend to flash with stock recovery) or doing factory reset and then flashing with stock recovery ( i suppose doing factory reset can be done no matter if rooted, modded, etc., am i right? Then i should be available to make update through system settings?)? Asking because some guys said thay haven't managed to flash stock rom through cwm.
Now let's skip to Kitkat. Supposing i have done flashing properly through cwm i will have Kitkat vibe in stock version. So what then? I suppose i will need to:
1. root it (with kingoroot or iroot or sth like that because there are some problems with root on kitkat, right?)
2. get rid of ****ty china apps through root (suppose there will be around 10 apps to delete, so i will just run ie. kinguser and delete this system apps?)
3. install compatible recovery through mobile uncle tools (cwm or twrp, but in xda rather reign twrp) to flash gapps and maybe supersu if it's possible? Because i've read there are problems with framaroot on vibe but this regards only to framaroot or supersu too?
4. maybe restore imei, if it's lost
5. flash new modem (suppose this one i have now: V52?)
That's rather all, right?
Thanks in advance for your patience in reading and your opinions !
fictionch said:
Hi guys,
.............................................................................................
Now let's skip to Kitkat. Supposing i have done flashing properly through cwm i will have Kitkat vibe in stock version. So what then? I suppose i will need to:
1. root it (with kingoroot or iroot or sth like that because there are some problems with root on kitkat, right?)
2. get rid of ****ty china apps through root (suppose there will be around 10 apps to delete, so i will just run ie. kinguser and delete this system apps?)
3. install compatible recovery through mobile uncle tools (cwm or twrp, but in xda rather reign twrp) to flash gapps and maybe supersu if it's possible? Because i've read there are problems with framaroot on vibe but this regards only to framaroot or supersu too?
4. maybe restore imei, if it's lost
5. flash new modem (suppose this one i have now: V52?)
That's rather all, right?
Thanks in advance for your patience in reading and your opinions !
Click to expand...
Click to collapse
Hi. Alot of writing here! My eyes are like snail eyes now after all this reading!
1. KingoRoot will do fine! Framaroot is not working in KitKat.
2. Before eliminate china apps try to do a full backup of your firmware.
3. Install TWRP, you will find here some.
4. IMEI is lost only if you flash firmware with FlashTool! Not your case.
5. Flash modem... look for my post and you have there alot of KitKat modem software!
6. Yes in general this is all!
7. More tweaks are made, by every user. Depends on every user choices!
8. Good Luck.
I'm after upgrading to kitkat and.... all i can say is:
1. upgraded to kitkat VIBEUI_V2.0_1512_7.149.1_ST_P780_OLK_W_3D22 through cwm (carliv for p780 cn, you can found them on www|ambrand|net/Android) and a nightmare came...
2. i was able to install Kingoroot but i wasn't able to flash any gapps (i had in system apps google play services but only this and after manual install of google store it: "unfortunately stopped" every time) and superuser... and when rebooted into recovery throug mobileuncle tools my binaries for kingoroot where lost so every time I needed to root again...
3. kingoroot helped only with uninstalling user apps not system apps... titanium backup kept saying it works only with supersu...
4. tried flashing gapps with different cwm and twrp --> no success...
5. generally vibe ui is very beautiful, and works slightly better than vibe JB
6. after like 8 hours of trying to get my kitkat to usable state, I gave up...
7. through searching the internet i found VIBEUI_V2.0_1512_7.149.1_ST_P780mix_pansy_1_pl_ 28_03_15, so installed and now it seems to be good, it is mostly for polish users but there is also english inside and it has:
-root
-gaaps
-Xperia keyboard
-Titanium Backup
-Root Explorer
-Sony (Walkman)
-Lenowo launcher 6.8.289
-Lenovo dialer 3.8
-browser Dolphin
-Android browser
-SYNCit 1.1.14
-it has a lot of apps deleted, as you can see it has walkman from sony, so lenovo music app is gone, but performance of whole system is good, so if nothing wrong will happen i will stick with it
8. also it has kinguser (not from kingoroot) installed, but i think from zip named: Android_4.4_x_root, i haven't flashed this zip so now i slightly regreted because it might work then, but maybe some day i will do a backup and waste another day to challenge with stock rom especially with finding working gapps...
fictionch said:
I'm after upgrading to kitkat and.... all i can say is:
1. upgraded to kitkat VIBEUI_V2.0_1512_7.149.1_ST_P780_OLK_W_3D22 through cwm (carliv for p780 cn, you can found them on www|ambrand|net/Android) and a nightmare came...
2. i was able to install Kingoroot but i wasn't able to flash any gapps (i had in system apps google play services but only this and after manual install of google store it: "unfortunately stopped" every time) and superuser... and when rebooted into recovery throug mobileuncle tools my binaries for kingoroot where lost so every time I needed to root again...
3. kingoroot helped only with uninstalling user apps not system apps... titanium backup kept saying it works only with supersu...
4. tried flashing gapps with different cwm and twrp --> no success...
5. generally vibe ui is very beautiful, and works slightly better than vibe JB
6. after like 8 hours of trying to get my kitkat to usable state, I gave up...
7. through searching the internet i found VIBEUI_V2.0_1512_7.149.1_ST_P780mix_pansy_1_pl_ 28_03_15, so installed and now it seems to be good, it is mostly for polish users but there is also english inside and it has:
-root
-gaaps
-Xperia keyboard
-Titanium Backup
-Root Explorer
-Sony (Walkman)
-Lenowo launcher 6.8.289
-Lenovo dialer 3.8
-browser Dolphin
-Android browser
-SYNCit 1.1.14
-it has a lot of apps deleted, as you can see it has walkman from sony, so lenovo music app is gone, but performance of whole system is good, so if nothing wrong will happen i will stick with it
8. also it has kinguser (not from kingoroot) installed, but i think from zip named: Android_4.4_x_root, i haven't flashed this zip so now i slightly regreted because it might work then, but maybe some day i will do a backup and waste another day to challenge with stock rom especially with finding working gapps...
Click to expand...
Click to collapse
I understand what you deed! But here in development area, are alot of firmware! Clean firmware, rooted firmware, etc,
My posts are in Development section.
Hi guys,
just sharing my latest adventure with kitkat...
VIBEUI_V2.0_1512_7.149.1_ST_P780mix_pansy_1_pl_ 28_03_15 was not working on 100% because for example I wasn't able to receive incoming calls...
so flashed again*VIBEUI_V2.0_1512_7.149.1_ST_P780_OLK_W_3D22 <-- stock version, and managed to make it work 100%
so in cwm (used "recovery_cwm_kk_mod_P780":
1. Wipe data/ factory reset
2. Wipe cache
3. Wipe dalvik cache
4. install zip from sdcard "VIBEUI_V2.0_1512_7.149.1_ST_P780_OLK_W_3D22"
5. install zip from sdcard "Android_4.4_x_root" <-- that is 100% working root, not like kingoroot...
6. after installation of root phone rebooted automatically
7. back to cwm and install zip from sdcard "YourZgappsXS-4.4-2014.06.18" <-- that also 100% working gapps
8. deleting china apps if you haven't done after first reboot ;p
9. make backup !! ;p
Those mentioned zips you can download easily with the help of uncle Google
Thank you guys for advices, especially stympy
I have recently acquired a P9 Plus (Chinese Version) and one of the issues with all of the Android phones sold in China is that they don't have Google services (Google in banned in China because of its refusal to comply with the Chinese internet regulations). There are ways you can install bits and pieces from the Huawei app store but it would be difficult to get all of the Google services together. There are ways already posted on XDA where you can install contact sync and app store one by one, but to me downloading through apkmirror (or any other site) could be a risk since those are uploaded by anonymous users and unless you can decompile the code and try to understand what's in those, it would be difficult to know if the apk is or is not doing something that are not designed for.
This guide assumes that you have unlocked bootloader and installed TWRP on it. Also I am not sure if you need to root the phone (which is pretty much for free once you had TWRP installed) but I had my phone rooted by the time I installed OpenGapps, obviously during this process you would have got the ADB drivers installed.
This process will wipe all user data, so please make sure you do a backup on your phone first.
First step is to download the installer zip to PC (or to SD card, I didn't have a spare SD card so I just download directly to PC), go to http://opengapps.org/, choose ARM64 (I know it is not actually ARM processor but somehow this package works, may be ARM and Kirin have compatible instruction set? That will sure make custom ROM development a lot easier!), 6.0 for OS version and choose the package you would like to have. I used nano but I am sure for other packages would work too.
Now go to TWRP on your phone. If you have downloaded the installer on your SD card you can just do Install -> select the zip and flash. I downloaded to my PC so I have to use the Sideload route, basically go to Advanced -> ADB sideload and simply do adb sideload FILE_NAME.zip (replace FILE_NAME with the actual OpenGapps package name you have downloaded). After that I originally tried to wipe caches and simply reboot but that didn't work for me.
So here is the trick, you will need to wipe Data and Internal Storage as well. I know, this sounds crazy but this is how it worked for me. If you managed to get other combinations to work feel free to suggest here as well.
What I did was I went to Wipe -> Advanced Wipe wiped Cache/Dalvik Cache, Internal Storage and Data (i.e., check everything except System and Micro SDCard) and then did a wipe.
After that, Reboot -> System.
Now once you are done with the set up, you will be greeted with an "uglier" version of the original UI (no fancy gold color!), but guess what, you should be able to see Google Play Store and you should be able to add Google accounts in Settings -> accounts.
For some reason I noticed if you try to add Google accounts you seem to be able to add one only (may be I overlooked something) so what I did was I went to the GMail app then go to Settings -> Add Account and that allows me to add the other Google accounts. Once you add a Google account on the GMail app it should be visible in other Google apps (App Store/Movies/Games, for instance) as well.
Any questions/better ideas feel free to post them below.
Deleted for "decency"
jvelasco said:
CFW: P9Plus B198 ROM Kangvip (excelent ROM!)
With micro opengapps...
Work fine...
Click to expand...
Click to collapse
Can you post download link please? I can't download, it is all in Chinese
Deleted
jvelasco said:
P9Plus_B198_Kangvip.zip
MD5: 349790fd71aa7b721bf172cfacec3056
For me the most useful of this ROM:
Click to expand...
Click to collapse
this rom without google apps
or how we can install google apps
Deleted
***DELETED****
To all: KangVIP ROMs has tonnes of bloatware in it including something called QiHu360 Browser that can't be removed automatically, please consider this before install the KangVIP ROM.
Deleted
***REMOVED***
zhuanyi said:
If you have read my post above, KangVIP has stuff that can not be removed (not easily at least), the official 198 has none of that.
If you want to post about the KangVIP ROM at least have the decency to start your own thread.
Beyond that, I don't really understand what you are trying to say.
Click to expand...
Click to collapse
To foolish words, deaf ears!
zhuanyi said:
I have recently acquired a P9 Plus (Chinese Version) and one of the issues with all of the Android phones sold in China is that they don't have Google services (Google in banned in China because of its refusal to comply with the Chinese internet regulations). There are ways you can install bits and pieces from the Huawei app store but it would be difficult to get all of the Google services together. There are ways already posted on XDA where you can install contact sync and app store one by one, but to me downloading through apkmirror (or any other site) could be a risk since those are uploaded by anonymous users and unless you can decompile the code and try to understand what's in those, it would be difficult to know if the apk is or is not doing something that are not designed for.
This guide assumes that you have unlocked bootloader and installed TWRP on it. Also I am not sure if you need to root the phone (which is pretty much for free once you had TWRP installed) but I had my phone rooted by the time I installed OpenGapps, obviously during this process you would have got the ADB drivers installed.
This process will wipe all user data, so please make sure you do a backup on your phone first.
First step is to download the installer zip to PC (or to SD card, I didn't have a spare SD card so I just download directly to PC), go to http://opengapps.org/, choose ARM64 (I know it is not actually ARM processor but somehow this package works, may be ARM and Kirin have compatible instruction set? That will sure make custom ROM development a lot easier!), 6.0 for OS version and choose the package you would like to have. I used nano but I am sure for other packages would work too.
Now go to TWRP on your phone. If you have downloaded the installer on your SD card you can just do Install -> select the zip and flash. I downloaded to my PC so I have to use the Sideload route, basically go to Advanced -> ADB sideload and simply do adb sideload FILE_NAME.zip (replace FILE_NAME with the actual OpenGapps package name you have downloaded). After that I originally tried to wipe caches and simply reboot but that didn't work for me.
So here is the trick, you will need to wipe Data and Internal Storage as well. I know, this sounds crazy but this is how it worked for me. If you managed to get other combinations to work feel free to suggest here as well.
What I did was I went to Wipe -> Advanced Wipe wiped Cache/Dalvik Cache, Internal Storage and Data (i.e., check everything except System and Micro SDCard) and then did a wipe.
After that, Reboot -> System.
Now once you are done with the set up, you will be greeted with an "uglier" version of the original UI (no fancy gold color!), but guess what, you should be able to see Google Play Store and you should be able to add Google accounts in Settings -> accounts.
For some reason I noticed if you try to add Google accounts you seem to be able to add one only (may be I overlooked something) so what I did was I went to the GMail app then go to Settings -> Add Account and that allows me to add the other Google accounts. Once you add a Google account on the GMail app it should be visible in other Google apps (App Store/Movies/Games, for instance) as well.
Any questions/better ideas feel free to post them below.
Click to expand...
Click to collapse
Hie, does re-locking bootloader clear the phone? Just like unlocking
ndiri said:
Hie, does re-locking bootloader clear the phone? Just like unlocking
Click to expand...
Click to collapse
I don't think locking does (at least with my experience in using the dload method), however if you want to unlock again later on it will wipe the phone. I'd recommend you to backup the phone before performing any of these actions though.
zhuanyi said:
I don't think locking does (at least with my experience in using the dload method), however if you want to unlock again later on it will wipe the phone. I'd recommend you to backup the phone before performing any of these actions though.
Click to expand...
Click to collapse
why is the dload not working in some instances? like on AL10, I cannot perform the dload update method, i have the latest update of emui 5.0 thats why i wanna re-lock then downgrade using hi-suit, then flash twrp and flash the updated version. it sucks,
but maybe you can help me on how to do the dload update.
First thing first,... I'm Just a noob here, I just did some testing things during my quarantine free time and got many errors with this Red Magic (which as far as I know has no update until now for international user). So, If there's something you guys know more than Me, or if I might do something wrong on my guide here, please correct me...
My goal was to get rid of the touchscreen bugs which still exist on International ROM (Oreo 8.1), but I still want the RGB light feature also...
Do it at your own risk!
Here you go:
ROOT for Omni 9.0 Unofficial by Vache and CN ROM 3.26 you can get it here
This root method I got it from here by member changguangyu on Red Magic 3!
Here you go :
I've tried with Fresh stock CN ROM 3.26 (update from without formating, result always failed for google apps at least for me)
install TWRP from fastboot
Download Magisk Manager (using 7.5.1 (267) when this post created)
Extract your boot.img from your Rom and save it to your download folder (i dunno - already tried to put it in another place, it gave me nothing).
Open Magisk Manager and it will say something like Magisk not Installed
Install it and select and patch the boot file you saved before.
It will create magisk_patched.img and save it to your computer.
Enable developer options > make sure to check (ON)USB debugging and OEM unlock on your device
Open command prompt on Windows: reboot to fastboot command :
Code:
adb reboot bootloader
Unlock your device
Code:
fastboot oem nubia_unlock NUBIA_NX609J
Use command :
Code:
fastboot flash boot magisk_patched.img
Reboot! and your phone should be rooted now.
Installing GAPPS on CN ROM 3.26 better, and simple method:
with this method, it was much simpler and the result is Google Play can download big files like PUBG Mobile
First, make sure your device is rooted!
Second, make sure twrp are installed (I use the one that came in the same link with omni 9.0 i think)
Third just flash GAPPS get it at Opengapps get it here . I use the pico one...
that's it! everything is smooth at least for me.
Now for a bit tricky part
Installing GApps (Google Play Services, etc) CN ROM only (I'm using 3.26).
This can be done after you root your device!
Open Magisk and go to the module, search for App Systemizer (Terminal Emulator) by Veez21 and reboot your device.
Download Google Installer (Chinese apps) (got it from this thread ) by Teeemoo
Click the blue-button and install everything until all the checklist is finished! After the install is done, don't open any google or add an account yet!.
Go to settings > App info > search for google calendar sync and everything that smells like google set every permission to yes! even storage! yes, Anything! (At first, I did not allow storage permission for play services, and it gives me an error during contact sync!) (Also you may want to check Settings > Notification Management > Playstore > make it open ).
Search for Termux (terminal emulator) on the internet, download the apk and install it. (I think I remembered it using F-Droid)
open termux use the following command :
Code:
su
then
Code:
systemize
then choose option
Code:
1
listed apps will be shown. choose Google apps at which number you want to systemize (mine started on 10 until 15) so i put
Code:
10
enter and then I make it as privilege apps or priv-apps by choosing option number
Code:
2
, and then go back to menu
Code:
y
--- Choose another google apps until it finished!
After all that, reboot!
Start by opening the play store
And Voila :fingers-crossed::good::laugh:
Tips:
Already tested it, some google features will not work nicely if it's not system apps... My solution is :
Install all google apps that i need after Play Store is installed nicely.
Example for Google Assistant (Saying "Hey Google" hot words) : Force Stop Nubia Share, Nubia Voice
Allow all permission, also go to Settings > Power Management > Application Power Management > Your Apps > Regardless of Control.
After that, Open Termux and systemize the Google Assistant.
After Reboot you will be prompted for "Okay, Google" hotword detection.
Again if someone has better tips, please post it...
I also experience some apps that don't run on the background (Whatsapp for example) - u need to run it first and don't clear from recent sometimes I guess.
I tried to download PUBG Mobile, and it says: can't update blablabla... see common ways to fix the problem (anyone knows how to resolve this issue? - (this problem only for big file i think) )
The Chinese Rom is nice, but it gave me a headache sometimes I already allow permission to some apps, when reopen, it goes back doesn't have permission again.... but after making it as a system (priv-app) from the app systemizer (from magisk and use it with Termux), all goes well.
PS: it will be great if someone can test this too, or make this ROM bloat-free! Thanks :good:
*latest update with CN ROM 3.32 = it works with this method...
UPDATE : CMIIW the 3.32 is so buggy for me, for example : we can't hear anything for ringtone after we changed the ringtone using mp3, and more bugs again... ringtone always getting silent by itself after several hour reboot, the most annoying thing is, fingerprint sometimes working sometimes not!. anyone that use 3.32 please share your experience too please...
Great work![emoji106][emoji106][emoji106]
great
I suppose first of all you have flashed custom recovery and then you tried install root
strakell said:
I suppose first of all you have flashed custom recovery and then you tried install root
Click to expand...
Click to collapse
For flashing boot.img I don't need to go to recovery... I just do it via fastboot command without entering recovery... But, it will be better if you have TWRP installed just in case.
http://ui.nubia.cn/rom/detail/53 new release 3.30 here ... anyone care to try ?
ianseer said:
http://ui.nubia.cn/rom/detail/53 new release 3.30 here ... anyone care to try ?
Click to expand...
Click to collapse
Downloading is pain from chinese website. But yeah will try today and see how it goes
it can be rooted but not android version change. Its still android 9. can be rooted but takes hell of a time to debloat the ROM. Maybe changing back to the official 8.1.
methuselah said:
it can be rooted but not android version change. Its still android 9. can be rooted but takes hell of a time to debloat the ROM. Maybe changing back to the official 8.1.
Click to expand...
Click to collapse
thanks appriciate it man... any changes for touch screen issue especially when phone is hot? and also it should be support dual window mode now (as far as i read by the google translate)
ianseer said:
thanks appriciate it man... any changes for touch screen issue especially when phone is hot? and also it should be support dual window mode now (as far as i read by the google translate)
Click to expand...
Click to collapse
this phone for me never got that much hot. It never had any touch issues. But yeah now u have latest security patch with this update. But the webview is still age old 66 something which is pain in ass. With root you can change atleast latest webview.
ROM V3.30 twrp-3.3.1-1
sorry for my english, IT WORKS, i tried the rom v3.30 and the official TWRP twrp-3.3.1-1-nx609j_SAR.img, downloaded from the official page twrp.me, just can´t hide magisk, display hide magisk failed and NETFLIX app doesn't work, your device isn't compatible, everything else is fine. about the touch bug and the heat, i don't have any problem.
TWRP release a new version Download twrp-3.4.0-0-nx609j.img, it´s available from the official page twrp me, for those who wants netflix app, use the version 4.16.1, sorry i can't publish the links
V3.31
Red Devils gaming mobile phone V3.31 (official version)
Release Date: 2020-09-22
Release Notes
system
Optimization: system stability and fluency
Fix: Incorporate Google GPU patch
game
Fix: Probabilistic black screen problem during the game
Fix: Probabilistic automatic screen lock during gameplay
other
Optimization: Fast charge animation
The optimized content of this update includes but is not limited to the items listed above
Red Devils gaming mobile phone V3.32
Software version: V3.32 (stable version)
Release Date: 2020-12-25
Version: V3.32Size: 2.34GB
MD5: 14233218463968118E9A2B8B9F82A246
Update log
Release Notes
system
Optimization: system stability and fluency
Update: Google Security Patch
Communication
New: Unicom vote function
other
Update: Phone Manager version
Update: browser version
The optimized content of this update includes but is not limited to the items listed above
http://romdownload.nubia.com/%E7%BA%A2%E9%AD%94%E7%94%B5%E7%AB%9E%E6%B8%B8%E6%88%8F%E6%89%8B%E6%9C%BA/V3.32/NX609J-update.zip
metalerock said:
http://romdownload.nubia.com/%E7%BA%A2%E9%AD%94%E7%94%B5%E7%AB%9E%E6%B8%B8%E6%88%8F%E6%89%8B%E6%9C%BA/V3.32/NX609J-update.zip
Click to expand...
Click to collapse
https://twrp.me/nx609j/twrp-3.4.0-0-nx609j.img
i have a 3.32 rom,its fantastic,but i need help to install Gapps,i have try,but nothing work,anyone can help me?i would appreciate it very much, i'm using it as second phone, and it's a bomb, but i don't want to put back the international rom, i prefer the cn, partly i solved it with huawei appgallery, but i would like the playstore..thanks
ok, i managed to put the apps, thanks to this guide, but in the playstore i still see the device not certified, how can i solve?
batocchietto_29_ said:
ok, i managed to put the apps, thanks to this guide, but in the playstore i still see the device not certified, how can i solve?
Click to expand...
Click to collapse
i think there is no way to get the device certified, because is a chinese rom, but i have no problem with that, only some apps can download from playstore as like netflix
TWRP for nx609jtwrp-3.5.1_9-0-nx609j.img
Download twrp-3.5.1_9-0-nx609j.img
Download page for twrp-3.5.1_9-0-nx609j.img
dl.twrp.me