Hello, i get a gear fit recently, but i dont have a samsung phone.
So after read some thread i decided to update the gear fit with odin 3.0.9.5 and an image R350XXU0BNG2 .
But odin turn red and said it failed, so i close odin, and press the button power.
And now it stuck on this screen : gear fit . . . /!\ . . . PC
I try to reload the image with odin, but it s still failed everytime i try.
If someone could help me, it would be nice !
Best regards.
Please help Gear Fit brick / Odin stuck flash fails...
This happened to me too, I was worried. However, as long as ODIN recognizes the gear fit you can still flash it. Plug it in to see if it's detected, if so try to flash again with the files at the following URL. There are also useful power point decks here to guide you.
http://www.retailsamsung.com/index.php?action=view&id=226&
HtcSfrdown said:
Hello, i get a gear fit recently, but i dont have a samsung phone.
So after read some thread i decided to update the gear fit with odin 3.0.9.5 and an image R350XXU0BNG2 .
But odin turn red and said it failed, so i close odin, and press the button power.
And now it stuck on this screen : gear fit . . . /!\ . . . PC
I try to reload the image with odin, but it s still failed everytime i try.
If someone could help me, it would be nice !
Best regards.
Click to expand...
Click to collapse
Did you get it fixed!!! I have the same problem. Or if someone else has a fix.
Related
please help !! i have tried to update the kernel and my phone was bricked.
i have tried to back to stock, everything is fine until odin said PASS! then the phone dosen't start in recovery mode , but he says Samsung Virant and he stay like that !
mouadm said:
please help !! i have tried to update the kernel and my phone was bricked.
i have tried to back to stock, everything is fine until odin said PASS! then the phone dosen't start in recovery mode , but he says Samsung Virant and he stay like that !
Click to expand...
Click to collapse
Download the Aio vibrant tool box from this forum and open up odin that comes with the toolbox.
Follow one of the youtube videos https://www.youtube.com/watch?v=krVj0XmkPeo&feature=youtube_gdata_player
here is one for you and next time do this:
http://bit.ly/rpmerp work every time
Time to learn what Odin is all about.
sent from my Sensation XD
Please guys, can anyone help me with a solution here ? I installed a theme which was unknown to me, not meant for the custom rom i was using, it did make the device unstable, then later, i got it back working, but now, each time i switch it on, on the welcome screen that displays " Samsung Galaxy Tab 10.1" there is a yellow triangle with the sign " ! " inside of the yellow triangle, below the " Samsung Galaxy Tab 10.1" welcome message, anyone got an idea what it is and how to get rid of it ? Please i really need your help here guy. I couldn't take screen shots but i will use a phone later. Ok i managed to attach the icon i see the " Samsung Galaxy Tab 10.1" welcome message when loading the OS.
If you have access to download mode, then use Odin and revert back to stock. Your title of your thread should be changed to , you bricked your tab not the theme.
If your not sure how to use Odin or where to get a stock file then read through this thread.
http://forum.xda-developers.com/showthread.php?t=1445142
Samdroid_G_S said:
If you have access to download mode, then use Odin and revert back to stock. Your title of your thread should be changed to , you bricked your tab not the theme.
If your not sure how to use Odin or where to get a stock file then read through this thread.
http://forum.xda-developers.com/showthread.php?t=1445142
Click to expand...
Click to collapse
I used Odin to flash stock but it wouldn't go out, i have flashed stock recovery several times, any more idea what to do please ?
yes. the theme didnt soft brick your tab. you did. and you do need to flash to stock with odin to get rid of that triangle. you said you did that and it didn't "go out"??? what is that supposed to mean dude? you need to flash to stock.
hi
i flashed my galaxy s2 with only PIT file by odin
after that my phone turned off
and now i can't turn it on or get into download mode or anything
I've tried SOFT & HARD reset and nothing helped
can you guys please help me .
mad921 said:
hi
i flashed my galaxy s2 with only PIT file by odin
after that my phone turned off
and now i can't turn it on or get into download mode or anything
I've tried SOFT & HARD reset and nothing helped
can you guys please help me .
Click to expand...
Click to collapse
You've bricked your device. Congratulations.
Only option is to get a JTAG repair or replace motherboard.
Why on earth did you partition your device? You have probably used a incompatible PIT file. Maybe next time you will be more careful or research things properley before attempting to do this kind of thing.
i dunno what is it with people and pit files. whenever i see a pit file i go like "hell no".
that's maybe because i've read a couple of threads like this.
from sii xda-ded
my samsung galaxy s3 device was in 4.1.1 fm and rooted with clockmode:good:. everything was alright till after i had hanged up a call of my friend and my phone turned out black.. i removed the battery and then tried to reboot it and it still stocking in boot screen if Gt-i9300. then i tried to enter recovery mode and didn"t worked. but my phone can be in restore mode, I used Oden to manually flash my fm which is I9300XXEMB1_I9300AUTEMA1_I9300XXEMB1_HOME.tar and it say either there is no PIT file or nmda and it failed. i downloaded PIT file which i found from the net named GT-I9300_mx_20120220.pit which is for 16gb and tried with odin it says wait pit for maping and stuck on that.. i tried another method talking abt how to unbricke my device with VRALEC.bootchain.tar.md5 and VRBLK3_Bootchain.tar.md5 with odin and it says FAIL ,,, my device can only enter restore mode only,,, i tried method using of CWM6023TouchVZW.tar.md5 in odin and is the only way that make response to my phone and the screen has blue line appeared when i had load the CWM6023TouchVZW.tar.md5 with odin, and i waited for 1 hour and my phone still with the same thing. :crying::crying:
please developers help me how can I tackle out this problem to be fixed..
i am really depressed and don"t know what to do to fix my device which is completely bricked now and only can enter to restore mode only and when i plug the charger no led light and my screen with battery only but always loading..
i am looking forward for your help
skycasaway said:
my samsung galaxy s3 device was in 4.1.1 fm and rooted with clockmode:good:. everything was alright till after i had hanged up a call of my friend and my phone turned out black.. i removed the battery and then tried to reboot it and it still stocking in boot screen if Gt-i9300. then i tried to enter recovery mode and didn"t worked. but my phone can be in restore mode, I used Oden to manually flash my fm which is I9300XXEMB1_I9300AUTEMA1_I9300XXEMB1_HOME.tar and it say either there is no PIT file or nmda and it failed. i downloaded PIT file which i found from the net named GT-I9300_mx_20120220.pit which is for 16gb and tried with odin it says wait pit for maping and stuck on that.. i tried another method talking abt how to unbricke my device with VRALEC.bootchain.tar.md5 and VRBLK3_Bootchain.tar.md5 with odin and it says FAIL ,,, my device can only enter restore mode only,,, i tried method using of CWM6023TouchVZW.tar.md5 in odin and is the only way that make response to my phone and the screen has blue line appeared when i had load the CWM6023TouchVZW.tar.md5 with odin, and i waited for 1 hour and my phone still with the same thing. :crying::crying:
please developers help me how can I tackle out this problem to be fixed..
i am really depressed and don"t know what to do to fix my device which is completely bricked now and only can enter to restore mode only and when i plug the charger no led light and my screen with battery only but always loading..
i am looking forward for your help
Click to expand...
Click to collapse
Seems like a sudden death issue.take it to the service center.they'll replace the board.
Sent from my GT-I9300 using xda premium
Its either SDS or user bricked .
Service centre is your only option left .
jje
yes it's SDS
JJEgan said:
Its either SDS or user bricked .
Service centre is your only option left .
jje
Click to expand...
Click to collapse
Thank's mate, i think it's SDS! Do you know any fix to this problem!? please help me:crying::crying:
skycasaway said:
Thank's mate, i think it's SDS! Do you know any fix to this problem!? please help me:crying::crying:
Click to expand...
Click to collapse
as said before: service centre
skycasaway said:
my samsung galaxy s3 device was in 4.1.1 fm and rooted with clockmode:good:. everything was alright till after i had hanged up a call of my friend and my phone turned out black.. i removed the battery and then tried to reboot it and it still stocking in boot screen if Gt-i9300. then i tried to enter recovery mode and didn"t worked. but my phone can be in restore mode, I used Oden to manually flash my fm which is I9300XXEMB1_I9300AUTEMA1_I9300XXEMB1_HOME.tar and it say either there is no PIT file or nmda and it failed. i downloaded PIT file which i found from the net named GT-I9300_mx_20120220.pit which is for 16gb and tried with odin it says wait pit for maping and stuck on that.. i tried another method talking abt how to unbricke my device with VRALEC.bootchain.tar.md5 and VRBLK3_Bootchain.tar.md5 with odin and it says FAIL ,,, my device can only enter restore mode only,,, i tried method using of CWM6023TouchVZW.tar.md5 in odin and is the only way that make response to my phone and the screen has blue line appeared when i had load the CWM6023TouchVZW.tar.md5 with odin, and i waited for 1 hour and my phone still with the same thing. :crying::crying:
please developers help me how can I tackle out this problem to be fixed..
i am really depressed and don"t know what to do to fix my device which is completely bricked now and only can enter to restore mode only and when i plug the charger no led light and my screen with battery only but always loading..
i am looking forward for your help
Click to expand...
Click to collapse
The thing is you flashed a version not meant for your GT I9300. You flashed the Verizon bootchain. Verizon GSIII is Samsung SCH-i535.
Different hardware than a i9300 (Qualcomm Snapdragon MSM8260A Dual core CPU, and the i9300 has a Samsung Exynos 4412 Quadcore). Sorry bro. If you still have download mode, you can try flash a i9300 bootloader. If not. you're dead.
Hi All expert out there,
I NEED HELP!!! From anyone out there.I have a problem with my phone.At first the phone was lag, Then i restored it manually on the phone, after restoring the phone didn't ON, Then i tried to charge the phone and it came out a greyish screen and i can't do anything else.I press volume up-off button-home button together and the phone screen appeared android logo and download.when i xonnected to the computer and read thru odin to restored.But it's stated in the odin NO PIT.What os that thing? And how can i get the pit? Hope to get alot of advice or suggestion for you people.Cheers
The first post has the stock n7105 pit file in it. Download it extract and flash with odin
http://forum.xda-developers.com/showthread.php?t=2773758
[Guide][Re-partiton][1.9GB_extra_space][Flashable zip]