VS985 Bricked G3 - Verizon LG G3

I tried to flash SkyDragon with stock kernal, but it ended up soft bricking(?) my phone. I tried holding down the volume and power button to access custom recovery, but nothing happens. The screen is just a black screen with blinking red and blue lights when attempting to boot.

drobstacle said:
I tried to flash SkyDragon with stock kernal, but it ended up soft bricking(?) my phone. I tried holding down the volume and power button to access custom recovery, but nothing happens. The screen is just a black screen with blinking red and blue lights when attempting to boot.
Click to expand...
Click to collapse
Keep trying, do a battery pull and try again. Does adb recognize your phone? If so try try booting to recovery that way. If all else fails flash a stock kdz

BladeRunner said:
Keep trying, do a battery pull and try again. Does adb recognize your phone? If so try try booting to recovery that way. If all else fails flash a stock kdz
Click to expand...
Click to collapse
I'm going to do the KDZ method. When I'm in download mode, at the bottom it says VUSER B88 Modified and it stays 0%. Is there anything wrong with that?
Edit: Okay. I found that holding the power and volume button once gives me access to TWRP. Thank you.

Related

[Resolve] Phone stucked after trying to back up

I was trying to back up my ROM (stock 2.2) via ROM Manager. It downloaded the clockwork recovery, then restarted. But after this, my phone wont continue to start anymore. It just shows a black screen with a little light blue pixel at the upper left of the screen, shut downs, then restarts again.
I tried to remove the battery, and pressed home+vol down+ power, but its the same. After the LG picture, it would turn black, restart, and repeat.
Edit: Used KDZ to flash the same rom, and its ok now.
sinscythex said:
I was trying to back up my ROM (stock 2.2) via ROM Manager. It downloaded the clockwork recovery, then restarted. But after this, my phone wont continue to start anymore. It just shows a black screen with a little light blue pixel at the upper left of the screen, shut downs, then restarts again.
I tried to remove the battery, and pressed home+vol down+ power, but its the same. After the LG picture, it would turn black, restart, and repeat.
Edit: Used KDZ to flash the same rom, and its ok now.
Click to expand...
Click to collapse
If your issue is resolved, update the thread title as [RESOLVED].
Also, do not use ROM manager... it is very crappy.
Thread updated. I thought ROM Manager is a very good app. I'll just stick to the old amon-ra recovery. Thanks

Bricked S3

I flashed a kernel on my S3 via recovery and then reboot my phone. It goes to a black screen now. When I pull the battery and power on holding volume down to go into recovery the Samsung Galaxy S3 logo keeps appearing and disappearing until I let go of the volume down key. Then it's stuck at the same black screen. When I try to put the phone in download mode to re-flash via odin it does the same thing. I'm pretty sure I'm fu*ked, but I just want to make sure there's not a way to fix this. Any ideas?
Chaos Residue said:
I flashed a kernel on my S3 via recovery and then reboot my phone. It goes to a black screen now. When I pull the battery and power on holding volume down to go into recovery the Samsung Galaxy S3 logo keeps appearing and disappearing until I let go of the volume down key. Then it's stuck at the same black screen. When I try to put the phone in download mode to re-flash via odin it does the same thing. I'm pretty sure I'm fu*ked, but I just want to make sure there's not a way to fix this. Any ideas?
Click to expand...
Click to collapse
Don't worry..i have done worse things with my phone and yet to brick it..
Fist thing to go into recovery you hold vol up + power + home and not vol down..
Second thing what you will have to do is after the Odin flash..press and hold vol up+power+home..you will boot into the stock recovery..from here do a factory reset but mind you all the data on your internal sdcard will be lost when you do this..now reboot your phone..your phone will boot up properly now..assuming that you have flashed the firmware properly in Odin..
Chaos Residue said:
I flashed a kernel on my S3 via recovery and then reboot my phone. It goes to a black screen now. When I pull the battery and power on holding volume down to go into recovery the Samsung Galaxy S3 logo keeps appearing and disappearing until I let go of the volume down key. Then it's stuck at the same black screen. When I try to put the phone in download mode to re-flash via odin it does the same thing. I'm pretty sure I'm fu*ked, but I just want to make sure there's not a way to fix this. Any ideas?
Click to expand...
Click to collapse
As zoot1 replied to you for download mode press vol down+home+power for a few seconds......for recovery vol up+home+power.........
And make very sure the kernel you flash is compatible with your phone and firmware!!!!!!!!!!!! The rest zoot1 explained in his reply
Good luck
Sorta Bricked
Anyone have an idea what I've done.... Black screen with blue light. I can get to the recovery menu, clockwork is installed, but I can't flash a rom. The only way to get the phone to stay off is by removing the battery.
This is a Cspire L710. I've attempted to flash a Cspire_nandroid_stock zip, the phone will find it but can't open it. I missed a step somewhere I guess. I had it in download mode but made the mistake of trying the factory reset-which changed that.
I've also tried a couple of other roms with the same results.
db1117 said:
Anyone have an idea what I've done.... Black screen with blue light. I can get to the recovery menu, clockwork is installed, but I can't flash a rom. The only way to get the phone to stay off is by removing the battery.
This is a Cspire L710. I've attempted to flash a Cspire_nandroid_stock zip, the phone will find it but can't open it. I missed a step somewhere I guess. I had it in download mode but made the mistake of trying the factory reset-which changed that.
I've also tried a couple of other roms with the same results.
Click to expand...
Click to collapse
go to download mode and flash a stock rom via odin
Cant's get to Download mode
Unless there is a way to get to download mode through the recovery menu, download mode is not an option.
db1117 said:
Unless there is a way to get to download mode through the recovery menu, download mode is not an option.
Click to expand...
Click to collapse
Well i suggest u send it with its warranty or u could check out my sig and build ur own usb jig
Sent from my GT-I9300 using xda premium
You might be able to get to download mode via a usb jig.

[Q] adb fastboot recovery doesn't work

Trying to get my phone into recovery mode. Droid DNA, root and s-off via Moonshine.
When I try to go into recover either through the bootloader or adb, the phone resets, goes dark for a bit, then shows a triangle with an exclamation point hovering over an image of the phone.
I can smother the phone and reboot, but I can't get into recovery.
Thanks in advance.
psetnik said:
Trying to get my phone into recovery mode. Droid DNA, root and s-off via Moonshine.
When I try to go into recover either through the bootloader or adb, the phone resets, goes dark for a bit, then shows a triangle with an exclamation point hovering over an image of the phone.
I can smother the phone and reboot, but I can't get into recovery.
Thanks in advance.
Click to expand...
Click to collapse
What recovery do you have on the phone, CWM ,TWRP? Or are you trying to get into the stock recovery?
Stock recovery.
psetnik said:
Stock recovery.
Click to expand...
Click to collapse
I lifted the following from somewhere....:angel:
Shut down the device. Hold down Volume Down and hold down Power until you boot into the HBOOT menu. Select the RECOVERY option using the Volume buttons. Your phone will show the white HTC screen, then you'll see a black screen. It will take a while but it will say failed to mount sd four times. Wait until it turns into a red triangle with an exclamation point inside the triangle and from there, hold down the Volume Up and then press the Power button. You will see a small list, this is stock recovery
Ha! That worked perfectly. I need to start a different thread now to understand the error message.
Thanks!

Phone keeps rebooting, cannot get into download mode

I had the phone on the newest PAC-MAN nightly, and I rebooted to my recovery (CWM 6.0.4.4) and flashed another recovery (TWRP 2.7.1) However, after I flashed it and went to reboot to recovery, it would not boot, simply vibrate until the first Samsung sign flashes, and then reboots. I cannot reboot into recovery, and trying to put it into download mode just does the same thing. Is there any way to someone force it into download mode so I can flash stock or anything? Thanks so much
I believe it's Volume up + Power to get it straight to download mode.
Your power button is stuck so it keeps resetting. Try flicking the back of your phone by the power button with your finger.
440bro said:
Your power button is stuck so it keeps resetting. Try flicking the back of your phone by the power button with your finger.
Click to expand...
Click to collapse
That did it. I'm surprised, I've never had this problem with this phone, thanks so much!
MadnessG said:
That did it. I'm surprised, I've never had this problem with this phone, thanks so much!
Click to expand...
Click to collapse
You're one of hundreds plagued with this problem. We should start a club!
Glad you're up and running again.

bricked sony z3v (can only access fastboot)

usually when i mess this phone up i am able to use the companion to flash it back to stock. i tryed to flash magisk and now the light flashes when plugged into a power source and the phone does not turn on at all. if i hold volume up while turning on it boots into fastboot mode because i see the blue light and i was able to use flashtool and its fastboot tools to flash system.sin from stock firmware but that has not made a difference. i have tried to get it into download mode(upgrade mode) by holding volume down but it continues to boot loop. if the device is not plugged into power and i hold volume down and power it boots into recovery and i click both safe mode and factory reset but both turn the device off. any ideas?
ths is far from beeig bricked. go into twrp recovery and flash new rom. this should work.
It is just a dead mobile
TjNiko said:
ths is far from beeig bricked. go into twrp recovery and flash new rom. this should work.
Click to expand...
Click to collapse
mine is not doing anything but it only boots into fastboot mode.
my device : Z3v D6708
rooted
no twrp is able to accessed.
dead body which blinks red+green LED when plugged in....and shows a blue light in fastboot.
Inside the SD card / SIM card slot is a small orange or red button, press with a tooth pick or a pin untill you feel vibration and then try to reflash.
a recovery shouzld be aways present at fota my friend.
rockinroller said:
Inside the SD card / SIM card slot is a small orange or red button, press with a tooth pick or a pin untill you feel vibration and then try to reflash.
Click to expand...
Click to collapse
i held the button in the sim card slot until the phone vibrated but what's next? i tried the companion and flashtool but the only thing it lets me do is flash the system, which does not fix my problem still, what is that button?
TjNiko said:
a recovery shouzld be aways present at fota my friend.
Click to expand...
Click to collapse
the only recovery available is the stock one that says power off, safe mode, continue boot, factory reset... none of them do anything....this device does have a locked bootloader, it uses a recovery like many motorola's do... its a software recovery so its gone lol
You should be able to use flash tool to flash the proper ftf file for your device. That is what you are trying to do right?
rockinroller said:
You should be able to use flash tool to flash the proper ftf file for your device. That is what you are trying to do right?
Click to expand...
Click to collapse
yes, every time i try it asks to put the device is upgrade mode, which it can not do at the moment
logan71f100 said:
yes, every time i try it asks to put the device is upgrade mode, which it can not do at the moment
Click to expand...
Click to collapse
So, if you hit the flash button on flashtool, tick the flashmode and after preparing it asks you to power off your phone and plug your USB cable into your computer and then press the volume button "down" while plugging in the USB cable to your phone, It should enter flashmode and start a automated flash. This is not working?
rockinroller said:
So, if you hit the flash button on flashtool, tick the flashmode and after preparing it asks you to power off your phone and plug your USB cable into your computer and then press the volume button "down" while plugging in the USB cable to your phone, It should enter flashmode and start a automated flash. This is not working?
Click to expand...
Click to collapse
nope thats my problem, i only can access flashmode, when plugged in it just bootloops, it only goes into flash mode via the blue light
logan71f100 said:
nope thats my problem, i only can access flashmode, when plugged in it just bootloops, it only goes into flash mode via the blue light
Click to expand...
Click to collapse
I'm not understanding how it is bootlooping. Your phone should be off (power off) when holding down the volume button and plugging in the USB. Is your phone powering on at this point to bootloop? If so you might have hardware problems Is all I can think of.
rockinroller said:
I'm not understanding how it is bootlooping. Your phone should be off (power off) when holding down the volume button and plugging in the USB. Is your phone powering on at this point to bootloop? If so you might have hardware problems Is all I can think of.
Click to expand...
Click to collapse
the phone started bootlooping after flashing that zip. so that rules out hardware, and when i say boot loop i mean lights flash screen stays dark..im trying to figure out if there's a fancy way to fix this through fastboot
depends on wich ftf was used before and bootloader some of them can enter flashmode just by put on the otg cable
It was running 5.1.1 and it boots into fastboot when I hold volume up, but just lights and virbates when holding down for upgrade mode
Same problem. z3v, accidentally flashed a wrong firmware zip via TWRP.
Now if I push the power button, nothing happens.
A long push causes a short vibration and nothing else.
Yellow rest button does not change anything either.
If I connect it to the PC, the following happens: Red led lights up briefly, phone vibrates, green led lights up briefly; whole sequence cycles after that. Now the only thing I can do from there is hold volume up for a couple of seconds, then the phone enters fastboot mode. Blue led lights up continuously. Flashtool sees the phone in Fastboot mode.
However, where to go from here, I cannot see. Any advise?
I had this problem once. It might be your usb cable try a brand new one that rated for data also not just charging. I was trying to root my phone at work and it wouldnt work and when I got home I tried a different usb cable and it worked.,
s300pmu1 said:
Same problem. z3v, accidentally flashed a wrong firmware zip via TWRP.
Now if I push the power button, nothing happens.
A long push causes a short vibration and nothing else.
Yellow rest button does not change anything either.
If I connect it to the PC, the following happens: Red led lights up briefly, phone vibrates, green led lights up briefly; whole sequence cycles after that. Now the only thing I can do from there is hold volume up for a couple of seconds, then the phone enters fastboot mode. Blue led lights up continuously. Flashtool sees the phone in Fastboot mode.
However, where to go from here, I cannot see. Any advise?
Click to expand...
Click to collapse
I am no closer than when I posted this, until there is a bootloader unlock witch in theory can be done through fastboot, we are s.o.l.
logan71f100 said:
I am no closer than when I posted this, until there is a bootloader unlock witch in theory can be done through fastboot, we are s.o.l.
Click to expand...
Click to collapse
aaa,It's very easy.you can use flashtool to flash a new system. but you must be in green light.only it.you also can be flash.sure,if your phone can't get into system,it only loop at"SONY".You touch the power and the volume up and down. keep 7s. then the phone will get into 3E RECOVERY,you chosed power down.and then the phonwill be power off. Now you can flash you phone.
If you phone can't get into green light.you can use the tool Z3X easy tool to save your phone.or it will be a brick.
my phone cant be start.it have became a brick. Good luck
s300pmu1 said:
Same problem. z3v, accidentally flashed a wrong firmware zip via TWRP.
Now if I push the power button, nothing happens.
A long push causes a short vibration and nothing else.
Yellow rest button does not change anything either.
If I connect it to the PC, the following happens: Red led lights up briefly, phone vibrates, green led lights up briefly; whole sequence cycles after that. Now the only thing I can do from there is hold volume up for a couple of seconds, then the phone enters fastboot mode. Blue led lights up continuously. Flashtool sees the phone in Fastboot mode.
However, where to go from here, I cannot see. Any advise?
Click to expand...
Click to collapse
I have same problem if you resolve it please help

Categories

Resources