Using RSD LITE v6.1.6 to flash my phone to stock xt-907 4.4.2 I get a fail error:
Failed flashing process. 3/21 flash partition "gpt.bin" -> Phone returned FAIL
and on phone in AP FASTBOOT it says:
Fastboot reason: flash failure
and I'm stuck. Holding all buttons, power off on, only brings me back to this screen
and in RSDlite my device comes up as : Fastboot SMQ S
any ideas? TIA!!!
Which firmware file?
Complete text on AP Fastboot screen?
Sent from my XT1028 using Tapatalk
Related
I am trying to unlock my bootloader. I went through all the steps and couldn't get it to work. I am currently rooted and that is it. I put my phone into rsd mode, put the sbf into rsdlite and then plug my phone in. I click start and everything seems to work until it gets to 98%. The status says BP Pass Through and then it says failed. I am running rsdlite 5.6.
dwh1996 said:
I am trying to unlock my bootloader. I went through all the steps and couldn't get it to work. I am currently rooted and that is it. I put my phone into rsd mode, put the sbf into rsdlite and then plug my phone in. I click start and everything seems to work until it gets to 98%. The status says BP Pass Through and then it says failed. I am running rsdlite 5.6.
Click to expand...
Click to collapse
It's supposed to fail. After it does, boot into fastboot then issue the unlock commands in fastboot from your computer:
Code:
moto-fastboot oem unlock
copy the unique id that it spits out then
Code:
moto-fastboot oem unlock yourid
this assumes that you are inside the moto-fastboot directory or have added moto-fastboot or fastboot to your path.
Hello,
I've been trying to get my Atrix back to stock condition and am successful to all but one task.
The phone works and boots great into stock but I always get this screen:
PwrReason: PWR_KEY_PRESS
OS will boot in 5 seconds
Press a key to stop count down
Available Modes are:
1 RSD
2 Fastboot
3 NvFlash
4 BP HW Byass RSD
5 BP HW Bypass Qc DLOAD
6 BP HW Diag & Boot AP
7 BP HW Bypass BP Only
8 BP SW Bypass RSD
9 Android Recovery
10 Boot Android (No BP)
11 Device UID
12 console=ttyso,1115200n8
13 Early USB Enumeration
14 BP Tools
-----------------------------
Vol Up to select, Vol Down
for next choice
Current choice is mode:
I have no issues with touchscreen, button function etc. but would just like to get rid of this screen before bootup.
I have done the following:
Boot to fastboot
moto-fastboot erase system
moto-fastboot erase boot
moto-fastboot flash system system.img (stock gingerbread img)
moto-fastboot flash boot boot.img (stock gingerbread img)
moto-fastboot -w
motof-fastboot reboot
It changed the CM7 bootloader, all the way back to stock, but I still get the multi choice option screen.
I then did
moto-fastboot erase recovery
moto-fastboot flash recovery recovery.img (using CWM recovery red atrix5)
Nothing!
I then did
moto-fastboot flash pds pdsfix.img
just to see if anything changes..nothign!
The only thing left to try is RSD-Lite and SBF flashing.. would that give me any different results?
*Trying to get my Atrix 4g back to stock gingerbread
five5outh said:
Hello,
I've been trying to get my Atrix back to stock condition and am successful to all but one task.
The phone works and boots great into stock but I always get this screen:
PwrReason: PWR_KEY_PRESS
OS will boot in 5 seconds
Press a key to stop count down
Available Modes are:
1 RSD
2 Fastboot
3 NvFlash
4 BP HW Byass RSD
5 BP HW Bypass Qc DLOAD
6 BP HW Diag & Boot AP
7 BP HW Bypass BP Only
8 BP SW Bypass RSD
9 Android Recovery
10 Boot Android (No BP)
11 Device UID
12 console=ttyso,1115200n8
13 Early USB Enumeration
14 BP Tools
-----------------------------
Vol Up to select, Vol Down
for next choice
Current choice is mode:
I have no issues with touchscreen, button function etc. but would just like to get rid of this screen before bootup.
I have done the following:
Boot to fastboot
moto-fastboot erase system
moto-fastboot erase boot
moto-fastboot flash system system.img (stock gingerbread img)
moto-fastboot flash boot boot.img (stock gingerbread img)
moto-fastboot -w
motof-fastboot reboot
It changed the CM7 bootloader, all the way back to stock, but I still get the multi choice option screen.
I then did
moto-fastboot erase recovery
moto-fastboot flash recovery recovery.img (using CWM recovery red atrix5)
Nothing!
I then did
moto-fastboot flash pds pdsfix.img
just to see if anything changes..nothign!
The only thing left to try is RSD-Lite and SBF flashing.. would that give me any different results?
*Trying to get my Atrix 4g back to stock gingerbread
Click to expand...
Click to collapse
This sounds like your boot logo, there are instructions to create / flash logos here ....
http://forum.xda-developers.com/showthread.php?t=1187337
theonepom said:
this sounds like your boot logo, there are instructions to create / flash logos here ....
http://forum.xda-developers.com/showthread.php?t=1187337
Click to expand...
Click to collapse
Ended up flashing the stock boot.img using fastboot and it worked!
Ended up using this: (The stock one in the OPs post was blurred)
http://forum.xda-developers.com/showpost.php?p=16527848&postcount=47
moto-fastboot flash boot boot.img
Thanks!
five5outh said:
Ended up flashing the stock boot.img using fastboot and it worked!
Ended up using this: (The stock one in the OPs post was blurred)
http://forum.xda-developers.com/showpost.php?p=16527848&postcount=47
moto-fastboot flash boot boot.img
Thanks!
Click to expand...
Click to collapse
Cool, glad that worked for you.
Now that it's fixed, maybe you can change the OP title to include "SOLVED".
Hi,
I successfully rooted and unlocked the bootloader on my LG MS323. However, In trying to return it to stock via Hard/Reset I am getting an error in the setup menu "Unfortunately, LGsetupwizard has stopped, OK" then it just loops to the same question over and over.
The only way I can connect to the phone is via the unlocked bootloader and fastboot.
1. Is there a way to reverse the hard/reset?
2. Is there a way to put the phone back into "firmware" mode so I can use the LG Mobile Tool program? I have tried using it and it fails because the bootloader comes up in fastboot and it just errors out.
Any suggestions? Thank You!
[Solved]
In case anyone finds themselves in a similar fate here are the steps I used to get back to the 'firmware screen".
1. Re-downloaded a different laf.img file from a site found by Google search.
2. Booted up the phone into Fastboot mode (power plus vol up).
3. Fastboot -w (erase everything)
4. Fastboot erase laf
5. Fastboot flash laf laf.img (file from above)
6. Fastboot continue.
That's it, the 'firmware' screen reappaeared.
Then I used the FlashTool2014 to flash the MS32310b_00.kdz
Phone back to normal.
*I am a N00b*
Hello all,
I have the XT830C (Tracfone) version Moto E, and I just turned it on after not using it for a while and it's stuck in "Fastboot mode" with the the normal options
Normal powerup
Recovery
Factory
Barcodes
BP Tools
QCOM
And below it says:
hab check failed for system
failed to validate system image
Fastboot Reason: Fall-through from normal boot mode
...
So I am wondering how to be able to boot up normally again. I have the firmware for it but no idea how I'd be able to flash it. I am unrooted and I have not tampered with the system in any way.
Help is gladly appreciated, thank you!
I tried all the recoveries but fastboot says "Booting...FAILED (remote: 'Failed to load/authenticate boot image: 00000050')" and I also tried miflash but it only brings back stock recovery and fastboot is still there when I switch on the phone normal with only power button.
U can flash latest fastboot file from mi flash tool ..in yt search how to go back stock miui using pc ...pblm will be fix...I also face this