Related
i have my galaxy s3 from orange england i unlock it and root it i conect it with kies i fine in kis a new update after this update i dont fine the cwm icon only SU icon a month after this i instal an officiel rom from sammobile i like it 4.1.2 one week after this i reinstal the same rom and now my mobile cant take updates from kies or odin and i cant root it !!
anyhelp please ????
sorry for my bad english im talking french ..
my galaxy is GT-I9300
is your device rooted? if it is you should just follow the instructions
1.hold volume up + home + power buttons to see the recovery mode
2.intsall zip from sd card (for a custom rom)
if you want the official rom just use odin
1.download odin
2.plug the device in download mode (volume down + home + power)
3.add the official rom in pda section then click the start
if you think u have a u should be clear
Not sure what you mean by odin updates. Odin doesn't do updates. You find a rom yourself and flash using odin. I'm pretty sure kies doesn't let you update rooted phones.
I suggest the same as above. Try installing a custom rom through recovery. You may have flashed unrooted official rom which means you have to root it again to get supersu back.
Sent from my GT-I9300 using xda premium
Well writing in understandable English would be a thing to start with.
You cannot update a phone trough kies when it is rooted. Kies will abort the update and give you a message which tells your device is rooted.
I would suggest you try to get into recovery mode and restore a nandroid backup.
If that's not working try flashing an official rom trough odin and root your phone again afterwards.
You could aswell go to a nearby orange shop and ask a salesman to restore the official firmware. (they have all the packages there ).
sorry
Sorry for my bad english i flash an officiel firemware In odin from sammobile now when i try to updat my s3 in kies i cant and also when i try to flash the last firemwar kies stop on get pit for mapping !!! Itry to change usp ports nothing work
Don't use kies. Just use odin to flash whatever firmware you need.
You won't be able to update using kies as your device status will be "modified". You need to unroot and factory reset to get it back to official.
As for not being able to root your device, flash xxella firmware from sammobile and flash siyah 1.8.7 kernel in cwm recovery. I can verify that definitely works.
Sent from my GT-I9300 using xda premium
Im trying the xxell1 but again odin stop on get pit for mapping ! nothing working
My guess is your pit partition is messed up. I suggest you search for a way to sort the pit mapping problem. I've seen some people recommend downloading a pit file from sammobile for your firmware.
Otherwise you'll have to send it off to repair centre.
Sent from my GT-I9300 using xda premium
xcly said:
My guess is your pit partition is messed up. I suggest you search for a way to sort the pit mapping problem. I've seen some people recommend downloading a pit file from sammobile for your firmware.
I need pit file for my firmware or for the newfirmware that i want to flash via odin ???
Click to expand...
Click to collapse
The one you want to flash. I think they're all the same. This is an inference from the fact that we don't use pit files when flashing new firmwares under normal circumstamces.
Sent from my GT-I9300 using xda premium
xcly said:
My guess is your pit partition is messed up. I suggest you search for a way to sort the pit mapping problem. I've seen some people recommend downloading a pit file from sammobile for your firmware.
Otherwise you'll have to send it off to repair centre.
look images !
http://www.imagup.com/data/1173085698.html
http://www.imagup.com/data/1173085933.html
Sent from my GT-I9300
Click to expand...
Click to collapse
Hi there,
I may have softbricked my i9300 S3 after failing to flash MIUI. I had the phone rooted already with custom recovery installed.
CWM 6.0.1.2. A friend recommended the recovery after he successfully installed it on his S3. I was running Android 4.1.2
so no Knox problems hopefully. I downloaded the latest MIUI rom for my phone directly from the official website and used the CWM
to try and flash it. My phone was already rooted at that stage and I had wiped cache and reset the phone prior to the flash attempt.
Unfortunately it gave me a Status 7 error. Even after I unrooted and rerooted my phone the error still remained. I read somewhere else
that this happens sometimes and so I edited the Updater-Script as suggested elsewhere and deleted the section pertaining to the
Verification process. I double checked I had the right ROM too and proceeded to wipe and flash again. It seemed to take and the phone
restarted and I was met with the MIUI language selection menu. However, when i tried to select English, the whole thing just froze and switched
off and restarted itself. But this time the screen went all weird and fuzzy and wouldnt boot back to MIUI interface. I tried to boot into recovery but with no luck. I have tried to reflash the recovery also with no luck. I have tried other versions of CWM alos without luck. Tried TWRP and also no luck. I have used both the 3.07 and the 1.85 version of ODIN with no luck. The flash would fail with either a PIT error or a COM port error. But I have all the necessary drivers installed. I have Kies but dont run it at the same time. The Emergency Firmware something also doesnt seem to work.
I have pictures of the various errors and such and can provide dropbox links if required
Any suggestions would be helpful.
Thanks!
Original Firmware
If I were you, I would go to Download Mode and Flash the Original Firmware from Samsung. Download it from the Sammobile Website and after you successfully installed it try it again.
Like Tkkg1994 said above download the Samsung firmware and use Odin to install it through download mode.
You were having a "Status 7" error when initially flashing miui because your CWM recovery was not the latest...download the latest cwm recovery (6.48.something not sure??) Then flash miui and hopefully you shouldn't have any problems.
Sent from a "Galaxy" far, far away with my Ultra Ray Gun
begin from bottom
Pulseuser said:
Like Tkkg1994 said above download the Samsung firmware and use Odin to install it through download mode.
You were having a "Status 7" error when initially flashing miui because your CWM recovery was not the latest...download the latest cwm recovery (6.48.something not sure??) Then flash miui and hopefully you shouldn't have any problems.
Sent from a "Galaxy" far, far away with my Ultra Ray Gun
Click to expand...
Click to collapse
Yes that's correct. Because of this I would do all things to get a normal S3 without root. That in download mode it shows Original and 0 flashs. Than I would download Philz latest Touch Recovery, clean to install a new rom, download the ROM again, maybe there is a fault, than install it again and root it later, not than.
Hope I could help
Thanks guys! I think that was the general consensus then. I'm trying to follow this guide here
http://unbrick.itcse.com/unbrick-soft-bricked-samsung-galaxy-s3-i9300/
But when I download the Original 4.1.2 ROMS they dont have all the mentioned csc files nor do they have any PIT files in them either.
The only file included in the ZIP was a MD5 file which i guess is the PDA file.
Regardless, I'll give it a go. I've found some newer CWM recoveries but they seem to be IMG files instead of ZIP or MD5.
Any idea how to convert it. I'm getting the file directly from the CWM ROM MANAGER website.
Thanks for all the help again!
Firmware
If you like to download the latest Firmware form Samsung, than I have a link for you:
HTML:
http://www.sammobile.com/firmwares/3/?download=33625
Creat a free account on sammobile, than download it. Flash it on Odin select AP (On Odin3) or PDA on Odin 1.85.
Hit thanks if I helped you
Thanks man but I live in Taiwan so selected Taiwan.
I downloaded this one
http://www.sammobile.com/firmwares/3/?download=19112
and also another one but both did not have the PIT file.
When I try to use ODIN 3.09 it says fail due to THERE IS NO PIT PARTITION.
There is only one file thats supposed to be for PDA i guess.
I have tried older ODIN 1.85 too. NO PIT PARTITION ERROR
Help?
james0908 said:
Thanks man but I live in Taiwan so selected Taiwan.
I downloaded this one
http://www.sammobile.com/firmwares/3/?download=19112
and also another one but both did not have the PIT file.
When I try to use ODIN 3.09 it says fail due to THERE IS NO PIT PARTITION.
There is only one file thats supposed to be for PDA i guess.
Help?
Click to expand...
Click to collapse
Extract the file inside the ZIP File. Than go to odin and on Odin3.09 select AP! Not PIT. This works!
Yes Sir Thanks but I was doing that before. When I unzip there is 2 files.
One is MD5 file and the other one is SS_DL.dll file
I loaded it in AP slot in ODIN 3.09 and ODIN 1.85
Still gives PIT Partition Error!
Is there any PIT file that I can use that wont brick my phone??
I really dont want to brick this phone!
james0908 said:
Yes Sir Thanks but I was doing that before. When I unzip there is 2 files.
One is MD5 file and the other one is SS_DL.dll file
I loaded it in AP slot in ODIN 3.09 and ODIN 1.85
Still gives PIT Partition Error!
Is there any PIT file that I can use that wont brick my phone??
I really dont want to brick this phone!
Click to expand...
Click to collapse
You don't brike your phone this way. I never select the SS_DL.dll file. You just need the MD5 file and do this in AP. I do some research on that but it should work
Yes thanks man. Even Samsung Official readme says that I should do it that way but I still get PIT error when I load the .tar file in the zip.
If someone can link me a working .tar file with PIT as well I would greatly appreciate it!
Thank you all!
Thinking about it....
james0908 said:
Yes thanks man. Even Samsung Official readme says that I should do it that way but I still get PIT error when I load the .tar file in the zip.
If someone can link me a working .tar file with PIT as well I would greatly appreciate it!
Thank you all!
Click to expand...
Click to collapse
Maybe flash a Philz Touch recovery first. Here is a link:
HTML:
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9300/philz_touch_6.48.4-i9300.zip.md5/
After that try again with the md5 from Sammobile
Thanks man. That one failed too. Some kind of binary error. I tried numerous other versions from the site
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9300/
Only the .tar ones load but when I start to flash it, the same PIT Partition error comes up.
I appreciate any and all help!
james0908 said:
Thanks man. That one failed too. Some kind of binary error. I tried numerous other versions from the site
https://goo.im/devs/philz_touch/CWM_Advanced_Edition/i9300/
Only the .tar ones load but when I start to flash it, the same PIT Partition error comes up.
I appreciate any and all help!
Click to expand...
Click to collapse
God damm it. -.- sorry bro I can just give you a last advice. Download the S3 Android 4.1.2 from Sammobile and try this the same way.
Tkkg1994 said:
God damm it. -.- sorry bro I can just give you a last advice. Download the S3 Android 4.1.2 from Sammobile and try this the same way.
Click to expand...
Click to collapse
Those are the ones I have been downloading from Sammobile. I havent downloaded any of the 4.3 versions. I have tried many 4.1.2 versions
Unfortunately none of them have the PIT file included.
Thanks!
Any other suggestions??
james0908 said:
Those are the ones I have been downloading from Sammobile. I havent downloaded any of the 4.3 versions. I have tried many 4.1.2 versions
Unfortunately none of them have the PIT file included.
Thanks!
Any other suggestions??
Click to expand...
Click to collapse
Ah than try it with a 4.3 version!
Maybe this thread could help.
There is a download for a PIT file for GT-i9300 16GB version.
Tkkg1994 said:
Ah than try it with a 4.3 version!
Click to expand...
Click to collapse
Thanks I did but it did not come with a PIT file and flashing it did not work.
UPDATE
Turns out that my S3 had a faulty eMMC chip and had to have the chip and the motherboard replaced.
NOTE TO OWNERS OF 2012 MODEL I9300 GALAXY S3:
I did not know this before I had the problem but there is apparently an APP on the PLAY STORE called eMMC Brickbug App.
That will apparently check your eMMC status. Since I was not aware of this app beforehand I cannot say for sure if this app
does or does not work. However I previously owned and since gave away a 2013 late model Galaxy S3 which had no issues
whatsoever. From all the details that I have read, it seems that most 2012 models of the i9300 are more susceptible to this kind
of problem. If you own a 2012 model please take extra care when flashing any type of software, even if its original from Samsung!
Finally thanks to all the Posters who have attempted to help me out. I'm sure that all of your suggestions would have fixed the issue had my
phone not been hard bricked in the first place.
Hello friends,
I have galaxy the 920x (the demo version) and I tried to flash twrp viauOdin. Everything worked but after restart it stucks at the Galaxy logo. Now I downloaded a full stock firmware and tried to flash via Odin and every time it fails at flash nand. Any help? Can I do something about it?
Sent from my Optimus G using XDA Free mobile app
obaidr said:
Hello friends,
I have galaxy the 920x (the demo version) and I tried to flash twrp viauOdin. Everything worked but after restart it stucks at the Galaxy logo. Now I downloaded a full stock firmware and tried to flash via Odin and every time it fails at flash nand. Any help? Can I do something about it?
Sent from my Optimus G using XDA Free mobile app
Click to expand...
Click to collapse
Did you unzip the download
obaidr said:
Hello friends,
I have galaxy the 920x (the demo version) and I tried to flash twrp viauOdin. Everything worked but after restart it stucks at the Galaxy logo. Now I downloaded a full stock firmware and tried to flash via Odin and every time it fails at flash nand. Any help? Can I do something about it?
Sent from my Optimus G using XDA Free mobile app
Click to expand...
Click to collapse
i also have the same problem with 920x (the demo version) i did the same wey
Yes of course. Everything is fine and it does the first steps but it fails at writing the nand. Does anyone have a PIT file? Maybe that way it can be fixed. I think the pit is wrong and Odin addresses a wrong area of the nand memory.
Sent from my Optimus G using XDA Free mobile app
Damn, i have the same issue, after flashing the TWRP recovery image with Flashify, my phone is stuck at the splash screen "Samsung Galaxy S6 Edge", i tried to flash the root file with the stock recovery (the 920f one), and my phone doesn't boot... So i also tried to flash a stock firmware through Odin and i have the nand fail error ! Hope that we'll have a solution quickly.
Maybe there is a way to read the nand structure of 920x. That might help solving the problem.
Sent from my Optimus G using XDA Free mobile app
Problem solved but i have a 925f not a 920x :/
It's the demo version for the Edge or for the normal S6 ?
You need to flash the right firmware for the right version through Odin.
do you guys tried odin the stock recovery 1st?
Where can I find the stock recovery?
Sent from my Optimus G using XDA Free mobile app
Ok for what its worth it:
the follwoing files can write the nand:
CF-Auto-Root-zeroflte-zerofltexx-smg920f.tar.md5
twrp-2.8.6.0-zerofltespr.img.tar
But the phone doesnt go into recovery, eventhough the setup processes is successful.
The following files however, can not write to nand and fail:
G920FXXU1AOD9_G920FOXA1AOD9_G920FXXU1AOD9_HOME.tar.md5
G920F-XXU1AOD9-BOOTLOADER.tar.md5
Maybe it helps a little.
But the phone cannot boot anything but the download mode.
obaidr said:
Ok for what its worth it:
the follwoing files can write the nand:
CF-Auto-Root-zeroflte-zerofltexx-smg920f.tar.md5
twrp-2.8.6.0-zerofltespr.img.tar
But the phone doesnt go into recovery, eventhough the setup processes is successful.
The following files however, can not write to nand and fail:
G920FXXU1AOD9_G920FOXA1AOD9_G920FXXU1AOD9_HOME.tar.md5
G920F-XXU1AOD9-BOOTLOADER.tar.md5
Maybe it helps a little.
But the phone cannot boot anything but the download mode.
Click to expand...
Click to collapse
CF-Auto-Root-zeroflte-zerofltexx-smg920f.tar.md5 ---> International Version
twrp-2.8.6.0-zerofltespr.img.tar ----> TWRP for Sprint S6
now does those files compatible with your phone? I know u said you have galaxy the 920x (the demo version) but I really can't tell you does those files work with your phone or not, may be not that's why your phone is soft brick right now.
Maybe but the first file I flashed and which made the phone stuck at the logo was the root file. I tried the other files to solve the problems. But still usually it should let me flash a original file from Samsung servers but it doesn't. Nand write error.
Sent from my Optimus G using XDA Free mobile app
same problem
Kev Lav said:
Damn, i have the same issue, after flashing the TWRP recovery image with Flashify, my phone is stuck at the splash screen "Samsung Galaxy S6 Edge", i tried to flash the root file with the stock recovery (the 920f one), and my phone doesn't boot... So i also tried to flash a stock firmware through Odin and i have the nand fail error ! Hope that we'll have a solution quickly.
Click to expand...
Click to collapse
have you solved it ...?? facing same problem
I have the same with my G925F, used the howto-flash-g92xf-and my phone doesn't boot only the splash screen
download kies 3 and then plug your device in, go to tools at the top and then firmware upgrade and initialisation, enter sm-g925f in the model number and then when it asks for your serial number then enter it from the back of the phone. (its in really faint writing) then follow the onscreen instructions
sometimes people have select reactivation lock in Samsung account and that block flash
http://forum.xda-developers.com/showthread.php?p=61576005
Have the same problem dont know what to do, anyone can solve the problem. I flash the root file with odin it give me an error, then a screen of warning to start the phone with smart switch, try to flash stock fw, and Im here blocked, please help, thanks.
You can try this guys, It worked for me, but the "secret codes" on phone app won't work (doesnt for me). If anyone find a way to solve this, it would be great!!!
http://forum.xda-developers.com/showpost.php?p=63668700&postcount=31
Hi. Basically I tried updating my bootloader and modem for my Galaxy S6 Edge so I could install a custom 5.1.1 Touchwiz ROM and after flashing them I've got the following error "System rev. Check fail. Device:2, Binary:1" I've looked into it and everybody says to try the 5.1.1 stock firmware but i've just realised that EE haven't even rolled out their carrier specific version of 5.1.1 yet and with it being an EE phone what are my options? Please I am desperate for some help!
I experienced the same problem with my international version. Needless to say I had to download Samsung kies on my desktop PC and go to tools and update firmware. Im stuck on 5.1.1 because you can't downgrade after that but at least I'm out of that error and my phone works.
Sent from my SM-G920F using XDA Free mobile app
#3
I had tha same... but my phone won´t recover with the Kies ¬¬
try to download a 5.1.1 firmware which matches most..and delete the hidden.img from it..for that rename the tar.md5 to tar and using winrar to unpack.. download the multitool from original development thread and copy the files to input directory.. now using the tool to repack into a Odin flashable format...
Alex-V said:
try to download a 5.1.1 firmware which matches most..and delete the hidden.img from it..for that rename the tar.md5 to tar and using winrar to unpack.. download the multitool from original development thread and copy the files to input directory.. now using the tool to repack into a Odin flashable format...
Click to expand...
Click to collapse
I did this and pass in the Odin, the phone download the firmware but after the samsung logo desappear, an android and a light blue screen appear, and the phone restart and begin this loop.
rafaelrgm said:
I did this and pass in the Odin, the phone download the firmware but after the samsung logo desappear, an android and a light blue screen appear, and the phone restart and begin this loop.
Click to expand...
Click to collapse
try to make the same again with wipe.. go Odin options.. also look that you don't have reactivation lock go Samsung account
Fail with wipe... and the rom i´m trying to flash, sometimes fails in the middle, and sometimes pass... when the phone start, after the fist samsung logo appear, this light blue screen and android start to install, and in the middle stops and appear in the screen " erasing " and after the phone reboot.
I´m thinking i´ll have to wait for the exact firmware for my G925I ZTO, no other is passing.. any ideas?
sadly no
coryjacko said:
Hi. Basically I tried updating my bootloader and modem for my Galaxy S6 Edge so I could install a custom 5.1.1 Touchwiz ROM and after flashing them I've got the following error "System rev. Check fail. Device:2, Binary:1" I've looked into it and everybody says to try the 5.1.1 stock firmware but i've just realised that EE haven't even rolled out their carrier specific version of 5.1.1 yet and with it being an EE phone what are my options? Please I am desperate for some help!
Click to expand...
Click to collapse
Man, I just got fixed my G925I, I delete the files (hidden img, cm.bin and sboot.bin) from the firmware from UK and flash.
You can use the Total Commander for that, it´s pretty easy.
I flash 2 times to work... The phone reboot 3 times and than works perfectly.
If fails in Odin, reconnect the cable and try again. It will work.
Hello friends, im new to the S6 forum. A fer days back i bought a used S6 Edge from ebay for very cheap. The phone had "software issues" according to the seller. I tought that it would not be so difficult to just download the correct firmware for it and flash it with ODIN, but it seems that it will be a little more complicated than that.
When i turn on the phone, it shoes the samsung s6 edge splash screen and then turns of and on again in a bootloop. When i try to access recovery mode by presing vol up + home + power nothing happens. I only have access to download mode. First i tried flashing arecovery into it, the ODIN process completed succesfully but I still cannot access recovery. I then tried to flash a firmware with ODIN and the process failed from the start. I got a NAND START WRITE FAILED message.
So at this point I really dont know what else to try. I have some sort of experience with LG and HTC phones but not so much with samsung,but if someone can point me on the right direction I think that i will be able to do it. Any help and ideas would be really apreciated!
BTW my S6 Edge is the emerald green version. Ive seen that the color matters somehow...?
Try to flash with pit file included to The latest firmware for the model. ..
Skickat från min SM-G925F via Tapatalk
---------- Post added at 09:17 AM ---------- Previous post was at 09:14 AM ----------
http://forum.xda-developers.com/galaxy-s6-edge/general/g925-pit-files-multi-thread-download-t3171636 there is the pitfile. That was my solution one time.
Skickat från min SM-G925F via Tapatalk
superior888 said:
Try to flash with pit file included to The latest firmware for the model. ..
Skickat från min SM-G925F via Tapatalk
---------- Post added at 09:17 AM ---------- Previous post was at 09:14 AM ----------
http://forum.xda-developers.com/galaxy-s6-edge/general/g925-pit-files-multi-thread-download-t3171636 there is the pitfile. That was my solution one time.
Skickat från min SM-G925F via Tapatalk
Click to expand...
Click to collapse
Thanks! i already tried that but i get NAND Write error no matter what...?
I had the same problem a few weeks ago and I just couldn't find an answer so I had to kind of figure it out myself, I'm going to try to help you as much as I can, Well Apparently you have the g925f so go here
http://forum.xda-developers.com/gal...p-recovery-2-8-7-1-g925f-android-5-1-t3144866
And download the twrp and flash it with Odin, you should be able to flash it without any problem unlike the firmware, when you're done,* you should be able to enter the recovery mode ( vol up + home + power ) Then try factory reset, And it should boot now, If it does, download this rom ( i recommend it because it's really light and it gets you out of trouble as it did to me )
xtrestolite (http://forum.xda-developers.com/gal...xtrestolite-deodexed-mod-edition-1-3-t3119968)
Then flash it with twrp again and everything should be working now
Pd: If for some reason it gets stuck on the setup wizard dont do anything and download the rom from a computer and transfer the file, since you can actually transfer files in the setup wizard. Then install it.
my s6 edge 64Gb SM-G925F / G925FXXU5EQH6 is also bricked please hlep
Hi I need help with my s6 edge 64Gb SM-G925F / G925FXXU5EQH6 S/N RF8G60B9LJT from new unlocked but I am on the UK 3 network.
I never messed with my phone, I got an updated in the background and it crashed.
I could not reboot. It crashed during clear cash, restore factory settings and smart switch.
I took it into Samsung store they reset it, but it is still restarting after a short time.
I took it back and they say it was rooted or messed with. yes by a bad update and so out of warranty now by magic.
I have no choice but to root using odin 3.12.7 and 3.12 using sammobile G925FXXU5EQH6 image
it does not work either.
I think the partition table is messed up as I tried ZEROLTE_EUR_OPEN.pit and SM-G925F H3G pit from sammobile
Still, no luck getting this to unbrick.
Please help and advice
Kind regards David
BrenTeck said:
Hi I need help with my s6 edge 64Gb SM-G925F / G925FXXU5EQH6 S/N RF8G60B9LJT from new unlocked but I am on the UK 3 network.
I never messed with my phone, I got an updated in the background and it crashed.
I could not reboot. It crashed during clear cash, restore factory settings and smart switch.
I took it into Samsung store they reset it, but it is still restarting after a short time.
I took it back and they say it was rooted or messed with. yes by a bad update and so out of warranty now by magic.
I have no choice but to root using odin 3.12.7 and 3.12 using sammobile G925FXXU5EQH6 image
it does not work either.
I think the partition table is messed up as I tried ZEROLTE_EUR_OPEN.pit and SM-G925F H3G pit from sammobile
Still, no luck getting this to unbrick.
Please help and advice
Kind regards David
Click to expand...
Click to collapse
Still having trouble with this?
Please help
callumbr1 said:
Still having trouble with this?
Click to expand...
Click to collapse
Yes please help, I still have a brick for an s6 edge.
BrenTeck said:
Yes please help, I still have a brick for an s6 edge.
Click to expand...
Click to collapse
http://updato.com/firmware-archive-select-model?record=33A75A0392E611E7963AFA163EE8F90B
Download and flash this firmware with Odin 3.12.7.
If the firmware has 5 files after extracting make sure you use the .CSC file and not the home_csc
7 files after extracting
callumbr1 said:
Download and flash this firmware with Odin 3.12.7.
If the firmware has 5 files after extracting make sure you use the .CSC file and not the home_csc
Click to expand...
Click to collapse
Hi, after extracting the zip I get one tar.md5 file which has
meta-data folder
boot.img
chache.img
cm.bin
hidden.img
sboot.bin
system.img
Also how do I change between .CSC file and home_csc if needed?
Thanks.
BrenTeck said:
Hi, after extracting the zip I get one tar.md5 file which has
meta-data folder
boot.img
chache.img
cm.bin
hidden.img
sboot.bin
system.img
Also how do I change between .CSC file and home_csc if needed?
Thanks.
Click to expand...
Click to collapse
You cannot change between csc and home_csc. It's just some firmwares come as 5 separate files. In your case just flash the .md5 firmware through AP in Odin.
Still no luck
callumbr1 said:
You cannot change between csc and home_csc. It's just some firmwares come as 5 separate files. In your case just flash the .md5 firmware through AP in Odin.
Click to expand...
Click to collapse
Thank, I tried that but still no luck. It just fails each time.
BrenTeck said:
Thank, I tried that but still no luck. It just fails each time.
Click to expand...
Click to collapse
At which part does it fail at?
Fails after hidden.img
callumbr1 said:
At which part does it fail at?
Click to expand...
Click to collapse
Hi Thanks for the help so far, It fails at hidden.img
BrenTeck said:
Hi Thanks for the help so far, It fails at hidden.img
Click to expand...
Click to collapse
Very easy, just unpack the firmware then remove the hidden.img repack it and flash it again. It will pass
corrupted data storage
callumbr1 said:
Very easy, just unpack the firmware then remove the hidden.img repack it and flash it again. It will pass
Click to expand...
Click to collapse
Well, it got further but stuck in a loop. Sometimes saying corrupted data storage, sometimes gets to the new 3 logo.
Do you have the correct re-partition file? I may have messed mine up.
BrenTeck said:
Well, it got further but stuck in a loop. Sometimes saying corrupted data storage, sometimes gets to the new 3 logo.
Do you have the correct re-partition file? I may have messed mine up.
Click to expand...
Click to collapse
If it gets stuck on the 3 logo for a while. Just leave it to boot it can take up to 20 minutes.
Or boot to recovery and wipe data/ cache
If that don't work flash the firmware again along with this pit file
https://mega.nz/#!jEwFmQYb!uK98rLtylYY6zLKgCfuMNQYL4cpcfoSZM1kFGzhRGuw
Put the pit in the correct place and check repartition
callumbr1 said:
If it gets stuck on the 3 logo for a while. Just leave it to boot it can take up to 20 minutes.
Or boot to recovery and wipe data/ cache
If that don't work flash the firmware again along with this pit file
https://mega.nz/#!jEwFmQYb!uK98rLtylYY6zLKgCfuMNQYL4cpcfoSZM1kFGzhRGuw
Put the pit in the correct place and check repartition
Click to expand...
Click to collapse
Just stuck in loop and crashes during wipe data / cash
BrenTeck said:
Just stuck in loop and crashes during wipe data / cash
Click to expand...
Click to collapse
Did you flash the pit?
callumbr1 said:
Did you flash the pit?
Click to expand...
Click to collapse
Yes