Omate Racer Stopped Working :( - Ornate TrueSmart

Hi, My Omate Racer just suddenly went dead. I didnt drain the battery dry nor got water damage. All I can see is a black screen and when i press the power button the backlight somewhat turns on and nothing on the screen. Plugged it in the laptop but doesnt recognize the device. Any ideas?

What happens if you try to charge the Smartwatch?

reply
[email protected] said:
What happens if you try to charge the Smartwatch?
Click to expand...
Click to collapse
Screen remains black occasionally grey in color, it seems to have power just nothing on screen. Plugged it in my laptop and the device is detected but the usb device is not recognized by windows.

The firmware is nowhere to be found, so even if flashing tools were available, there is no firmware to flash it with. If Omate will not fix it, please PM me.

Any luck bringing it back to life or getting Omate to fix it?

No luck
Still mailing Omate if they can help me flash me out of this misery, I really wanted to try update its firmware or something.. its frustrating to see this watch go to waste
Lokifish Marz said:
Any luck bringing it back to life or getting Omate to fix it?
Click to expand...
Click to collapse

I have a omate racer watch
i was updating my watch but doesn't finish
It does not open now, i push the button but doesn't answer.
Are you fix it your watch ?

Animanyak said:
I have a omate racer watch
i was updating my watch but doesn't finish
It does not open now, i push the button but doesn't answer.
Are you fix it your watch ?
Click to expand...
Click to collapse
Always make sure you have full battery before launching a FOTA update this is true not only to Omate but every smartphone. You have most likely bricked your device. Contact Omate [email protected] and they will help.

OmateDev said:
Always make sure you have full battery before launching a FOTA update this is true not only to Omate but every smartphone. You have most likely bricked your device. Contact Omate [email protected] and they will help.
Click to expand...
Click to collapse
If Omate bothered to post firmware on their site, then he would be able to get it running again. That would save Omate and the customer both time and money.

Related

[Q] Official OTA bricked my phone?

As far as I could tell from the comments the Exploid root would work even after I had updated with the newly available official OTA for my E10i. It took 3 tries to download the OTA on the phone. The phone then said it would begin the update and then it turned itself off. It has been off now for the last hour and any attempt to wake it has been fruitless. How is OTA supposed to work anyway? How long should the update take and how should it proceed? How can I get my phone to respond again?
I had a bit more luck ... On my german phone ota say 'update not possible' so I use seus and it works. Maybe you can use seus to debrick your phone
Sent from my E10i
At this point I really don't know what to do. The phone won't turn on no matter what I try. Aren't you supposed to be able to reset the phone by holding power and the middle button on the front? When I do that the phone gives a short vibration but then nothing else happens.
I was able to plug the phone into my computer and get it recognized by the SE Update Service program. I performed a Factory Reset + Update (twice), but the phone is still not turning on. Guess I need to contact support.
When you say "not turning on", does it get stuck after the boot anim? That's totally normal on the first boot for Android. When I last did a SEUS update it took about 5 minutes before the homescreen appeared
No, what I meant was that there was absolutely no picture of any kind on the display at all.
Anyway, time heals old wounds or something, because suddenly after 2 hours of not doing anything it suddenly started working again. I've even managed to get root now. Hooray.
junglepunk,
Damaged TA (trim area).
Only SErvice Center may help to you. You can't repair it by yourself.
xfdisk11 said:
junglepunk,
Damaged TA (trim area).
Only SErvice Center may help to you. You can't repair it by yourself.
Click to expand...
Click to collapse
Cool, then I'm going into business cause apparently I'm able to fix damaged phones
Oops. Not accuracy reading. But i'm really damaged my.
xfdisk11 said:
Oops. Not accuracy reading. But i'm really damaged my.
Click to expand...
Click to collapse
Sorry to hear that. Hopefully they can fix it quick.

[Q] Update Bricked my Transformer Prime

I updated the firmware this morning and it looked like it had worked but then there was an explanation point in the notification bar saying there was an update available. I clicked the icon and everything froze. I tried to power off but it froze at the confirmation screen. I held the power button down with the volume down button to reset and it just took me to a page with gears and an orange explanation point. i did the data wipe with the same result. I did the reset button with a paperclip and same result. I downloaded the update onto a micro SD card and did the data wipe and was told by ASUS it would install the update from the SD but still nothing. I cant figure anything out, if anyone has suggestions or any similar problems let me know.
This is the thread you are looking for -> http://forum.xda-developers.com/showthread.php?t=1423503
Hope you fix it...
mine got bricked too. called Asus and they walked me through the factory reset process to no avail. they want me to send mine back to be fixed
I just RMA'd mine. I hope they dont release a do it from home fix because i have to wait about 3 weeks most likely til i get it back. what a bunch of b*ttholes.
joe14 said:
This is the thread you are looking for -> http://forum.xda-developers.com/showthread.php?t=1423503
Hope you fix it...
Click to expand...
Click to collapse
cassato said:
I just RMA'd mine. I hope they dont release a do it from home fix because i have to wait about 3 weeks most likely til i get it back. what a bunch of b*ttholes.
Click to expand...
Click to collapse
Had you read this guys link....you would see there is an easy fix for this.....I guess reading is too difficult........
I will put this in here just to help you out, though I doubt you will read it....
Drain the battery completely...re-charge.....and wham!!! all fixed....and I don't even have mine yet and I knew this......
slayer69 said:
I guess reading is too difficult
Click to expand...
Click to collapse
sorry to hear you are having problems, try hooked on phonics or something. it might also help you eliminate some unnecessary periods which seem to plague your posts.
perpetual reboot loop
slayer69 said:
Had you read this guys link....you would see there is an easy fix for this.....I guess reading is too difficult........
I will put this in here just to help you out, though I doubt you will read it....
Drain the battery completely...re-charge.....and wham!!! all fixed....and I don't even have mine yet and I knew this......
Click to expand...
Click to collapse
the OTA updates launched me into a perpetual reboot loop. i tried letting the battery drain all the way down but it didn't stop it once I powered back up the next day.
ASUS phone tech's want me to send it in for service, but before I send it I am hoping that someone has another solution I can try.

[Q] Help! New Galaxy S Advance Bricked After ODIN Upgrade!

Hi People of the world! As you can see im new to here so yeah i just might be in the wrong section...
So, I just got my shiny android a week ago, and know it sits on my desk, lifeless, like a brick. Like literally its dead! I don't know if I can fix it or the BIOS (if theres one in Samsung Galaxies) is fried, or maybe the motherboard is fried, or the battery overcharged, etc. But I just cant do anything! I'm totally out of ideas!
Heres the problem, I first rooted my android successfully, and played around with my android a while. But as you expect I just coudn't wait for the jelly bean update! So, I desided I would give a try to take the Russian firmware instead. That was already a bad idea, but I read on some threads that it would work fine, so I downloaded one from Sammobile.com. The real mistake? I downloaded the wrong phone. I own a Samsung Galaxy S Advance NFC Version;GT-I9070P The one I downloaded was UnNFC version; GT-I9070. Well, I didn't realize that, and proceeded with entering download mode and eventually flashing the PDA file from Sammobile with ODIN. So I pressed start. It started the process, and after 5 min it said in blue: RESET. I saw the phone rebooting. Now, another big mistake: I started touching the power button, which I shouldn't have done. Then, instead of waiting, as soon as seeing the thing wasnt booting, I took out the battery and unplugged the USB cable. Then after a while the PASS appeared in green. So it went successfully? NONONO Now it wont boot! More specifically, it wont TURN ON! like it wont whow any sign of life. As if it had no battery or USB.
Today I discovered, If I hold Vol UP+Power+Home when its connected to my PC, it makes the beep, shows that it failed to install the driver for "U8500 USB ROM" What the (*^&(&%*(&^&* is that??? Also, in 5 seconds, the device disappears, meaning that I must hold the button combo for another 20 seconds.
So, I've got no connectivity to ODIN, nor Kies, and I cant go into download mode, nor recovery mode.
Any Help?
Pleeaase if you can help youre a super god of androids!
ok, so if I understand correctly, You can't even turn on a phone - no samsung logo, no yellow triangle, nothing, right?
MikeSome1 said:
ok, so if I understand correctly, You can't even turn on a phone - no samsung logo, no yellow triangle, nothing, right?
Click to expand...
Click to collapse
Exactly. Nothing at all.
The only evidence that its not fried is that the computer detects it as U8500 USB ROM for 5 seconds whenever i hold the power button or any combination. Nothing on the phone though.
Hey
Hey man got the same problem... I have put mine to a service center i will see what the'll do
pafiking said:
Hey man got the same problem... I have put mine to a service center i will see what the'll do
Click to expand...
Click to collapse
Yeah i think I should take it to service too, but I want to try at least first:cyclops:
I've just repeated exactly the same steps as the OP on my GT-9070P and have "successfully" bricked my two-week-old phone. If someone happens to find a solution, please share. :crying:
Lynnfield4000 said:
I've just repeated exactly the same steps as the OP on my GT-9070P and have "successfully" bricked my two-week-old phone. If someone happens to find a solution, please share. :crying:
Click to expand...
Click to collapse
Ikr its really bad to break your phone as soon as i get it. Worse, for me its a few of days to my birthday! Worse thing that could happen. I will PM you if i happen to find a good solution. Also, to make it really the worst thing, the GT-I9070 is one of the less popular phones (not like the s3). The NFC version? Even rarer! So not only are there not many developers working for that phone, not many people have really encountered problems with the phone at all.
Surge
Surge411 said:
Ikr its really bad to break your phone as soon as i get it. Worse, for me its a few of days to my birthday! Worse thing that could happen. I will PM you if i happen to find a good solution. Also, to make it really the worst thing, the GT-I9070 is one of the less popular phones (not like the s3). The NFC version? Even rarer! So not only are there not many developers working for that phone, not many people have really encountered problems with the phone at all.
Surge
Click to expand...
Click to collapse
Please help! I also bricked my Samsung S Advance I9070P after downgrading from JB to GB, since JB was updated for India I9070...but the phone bricked after downgrade. Everything was successful and it had auto-rebooted after the downgrade and stuck with Start up screen. When I removed battery and tried again..it bricked! No recovery mode, No download mode, no power on.
Surge411 said:
Ikr its really bad to break your phone as soon as i get it. Worse, for me its a few of days to my birthday! Worse thing that could happen. I will PM you if i happen to find a good solution. Also, to make it really the worst thing, the GT-I9070 is one of the less popular phones (not like the s3). The NFC version? Even rarer! So not only are there not many developers working for that phone, not many people have really encountered problems with the phone at all.
Surge
Click to expand...
Click to collapse
So you find any solution? I have a similar problem right now.

[Q] Anyone else had to soft reset their device?

So this is probably the 3rd thread I've made for this device.
After returning my first Z2, I got this one a few (maybe 4 to 5) days ago and now I'm having issues with it. First time, the screen froze at my lock screen pattern entry; no response whatsoever but the LED light was blinking as I had a notification. I had to hold volume up + power button to soft reset. In the same day (today) I've just had to reset it again for the second time but this time, the power button would not wake the screen! No matter what I clicked, it would not work so I had to press volume up + power again till it vibrated 3 times and reset. I'll be going back to return the phone tomorrow and getting my third Z2! Anyone else having issues or anyone have any ideas as to why it's/what is happening?
Thanks in advance for any responses
EDIT: Are there any built in logs I can have a look at or anything of that sort to determine what went wrong?
Devzz said:
So this is probably the 3rd thread I've made for this device.
After returning my first Z2, I got this one a few (maybe 4 to 5) days ago and now I'm having issues with it. First time, the screen froze at my lock screen pattern entry; no response whatsoever but the LED light was blinking as I had a notification. I had to hold volume up + power button to soft reset. In the same day (today) I've just had to reset it again for the second time but this time, the power button would not wake the screen! No matter what I clicked, it would not work so I had to press volume up + power again till it vibrated 3 times and reset. I'll be going back to return the phone tomorrow and getting my third Z2! Anyone else having issues or anyone have any ideas as to why it's/what is happening?
Thanks in advance for any responses
EDIT: Are there any built in logs I can have a look at or anything of that sort to determine what went wrong?
Click to expand...
Click to collapse
Is your phone bone stock at the moment? (locked BL, no root, stock rom, stock kernel)
I had the issue initially - the phone wouldn't wake up a couple of times a day and I'd have to soft reset. But I was rooted with a custom kernel, etc. and learning to use the tools for Sony phones (coming from Samsung phones). But now it's perfectly stable. In my case, I suspect it was a combination of how I was flashing things,etc.
Otherwise, completely stock, i don't recall the phone freezing. Have you done a complete wipe and repair via SUS or PC Companion?
prazvt said:
Is your phone bone stock at the moment? (locked BL, no root, stock rom, stock kernel)
I had the issue initially - the phone wouldn't wake up a couple of times a day and I'd have to soft reset. But I was rooted with a custom kernel, etc. and learning to use the tools for Sony phones (coming from Samsung phones). But now it's perfectly stable. In my case, I suspect it was a combination of how I was flashing things,etc.
Otherwise, completely stock, i don't recall the phone freezing. Have you done a complete wipe and repair via SUS or PC Companion?
Click to expand...
Click to collapse
Hey, yeah the phone is pure stock. I've not messed around with the software nor downloaded anything I shouldn't have. I've not done a complete wipe and repair but I'm thinking about factory resetting. Obviously this is not a hardware issue but I don't want to have to keep resetting my phone twice a day because that is stupid. Hopefully it was a one off and I guess I'm not too bothered but I may go in store tomorrow and just see if they will replace it. Silly reason to do so, I know, but I guess I'm within my rights if the phone isn't working properly. What do you think?
Devzz said:
So this is probably the 3rd thread I've made for this device.
After returning my first Z2, I got this one a few (maybe 4 to 5) days ago and now I'm having issues with it. First time, the screen froze at my lock screen pattern entry; no response whatsoever but the LED light was blinking as I had a notification. I had to hold volume up + power button to soft reset. In the same day (today) I've just had to reset it again for the second time but this time, the power button would not wake the screen! No matter what I clicked, it would not work so I had to press volume up + power again till it vibrated 3 times and reset. I'll be going back to return the phone tomorrow and getting my third Z2! Anyone else having issues or anyone have any ideas as to why it's/what is happening?
Thanks in advance for any responses
EDIT: Are there any built in logs I can have a look at or anything of that sort to determine what went wrong?
Click to expand...
Click to collapse
hi mate , could you please give us your update on this thread ? http://forum.xda-developers.com/showthread.php?t=2757544
Let us know about the batch and what problems you'hv been facing
Thank you
shaf46 said:
hi mate , could you please give us your update on this thread ? http://forum.xda-developers.com/showthread.php?t=2757544
Let us know about the batch and what problems you'hv been facing
Thank you
Click to expand...
Click to collapse
Hey Shaf, thanks for the suggestion. I've just posted there now so you can see all the issues I've had with this particular device so far. What do you think I should do - as in should I go in and see if they will exchange it or should I wait for the .69 firmware to roll out?
Devzz said:
Hey Shaf, thanks for the suggestion. I've just posted there now so you can see all the issues I've had with this particular device so far. What do you think I should do - as in should I go in and see if they will exchange it or should I wait for the .69 firmware to roll out?
Click to expand...
Click to collapse
i would wait for the firmware to come out but if you paid for it and under a warranty then go and change it and look out for the physical issues before receiving another one as one it is software issue its fine but like i say under warranty ? you paid for it ? then change it
shaf46 said:
i would wait for the firmware to come out but if you paid for it and under a warranty then go and change it and look out for the physical issues before receiving another one as one it is software issue its fine but like i say under warranty ? you paid for it ? then change it
Click to expand...
Click to collapse
I only bought it a few days ago and manufacturer's warranty is 12 months here I think I'll keep it and see if a firmware update helps because it is perfect hardware wise and I won't be happy if they give me a new one and it has gaps etc. Would you happen to know if the new update helps with the camera/overheating issue?
Devzz said:
I only bought it a few days ago and manufacturer's warranty is 12 months here I think I'll keep it and see if a firmware update helps because it is perfect hardware wise and I won't be happy if they give me a new one and it has gaps etc. Would you happen to know if the new update helps with the camera/overheating issue?
Click to expand...
Click to collapse
my friend, go to setting factory reset the phone as new , format your sd card as new or buy a new one
then re set up the phone, don't install unnecessary apps or games
i don't know yet but ill wait for officials ones im scared of bricking my phone :#
shaf46 said:
my friend, go to setting factory reset the phone as new , format your sd card as new or buy a new one
then re set up the phone, don't install unnecessary apps or games
i don't know yet but ill wait for officials ones im scared of bricking my phone :#
Click to expand...
Click to collapse
Yeah I'll factory reset if it happens again! Haha yeah I've not done anything to it simply because this is my first non-nexus phone since the Nexus S! Can't risk anything happening Thanks again for all your help Shaf, appreciate it! :highfive:
Devzz said:
Yeah I'll factory reset if it happens again! Haha yeah I've not done anything to it simply because this is my first non-nexus phone since the Nexus S! Can't risk anything happening Thanks again for all your help Shaf, appreciate it! :highfive:
Click to expand...
Click to collapse
haha no worries mate, im here to help people
and keep us update
sony xperia is a really nice phone but its like a ferrari :3 so you need to take care of it and clean it every time just like a baby :')
shaf46 said:
haha no worries mate, im here to help people
and keep us update
sony xperia is a really nice phone but its like a ferrari :3 so you need to take care of it and clean it every time just like a baby :')
Click to expand...
Click to collapse
So it looks like I've got a faulty Ferrari just had to reset it again for a third time! Not sure what the reason is but again the power button would not respond and the screen would not wake.
Devzz said:
So it looks like I've got a faulty Ferrari just had to reset it again for a third time! Not sure what the reason is but again the power button would not respond and the screen would not wake.
Click to expand...
Click to collapse
Now, this is an issue mate don't play with it leave it, if you got guarantee, claim it please
shaf46 said:
Now, this is an issue mate don't play with it leave it, if you got guarantee, claim it please
Click to expand...
Click to collapse
Hey mate, sorry late reply! I rang the place I bought the phone from and they said if I can't reproduce the problem they cannot replace it as I have no proof so I'm waiting for it to happen again as I have no clue what is going wrong!
Devzz said:
Hey mate, sorry late reply! I rang the place I bought the phone from and they said if I can't reproduce the problem they cannot replace it as I have no proof so I'm waiting for it to happen again as I have no clue what is going wrong!
Click to expand...
Click to collapse
i don't why sellers are *****y , when you buy something they open their mouth and smile at you when its not working properly you become their worst enemy next time mate do a video when it lags / freeze, and show it to them it will shut their mouth
shaf46 said:
i don't why sellers are *****y , when you buy something they open their mouth and smile at you when its not working properly you become their worst enemy next time mate do a video when it lags / freeze, and show it to them it will shut their mouth
Click to expand...
Click to collapse
Haha, to think I'm gonna be working for them next month! Yeah I'll have to record all problems from now until them give me a working phone. I saw the .402 OTA was available from today in Europe so I'll wait for that to roll out before making any rash decisions about returns
Devzz said:
So this is probably the 3rd thread I've made for this device.
After returning my first Z2, I got this one a few (maybe 4 to 5) days ago and now I'm having issues with it. First time, the screen froze at my lock screen pattern entry; no response whatsoever but the LED light was blinking as I had a notification. I had to hold volume up + power button to soft reset. In the same day (today) I've just had to reset it again for the second time but this time, the power button would not wake the screen! No matter what I clicked, it would not work so I had to press volume up + power again till it vibrated 3 times and reset. I'll be going back to return the phone tomorrow and getting my third Z2! Anyone else having issues or anyone have any ideas as to why it's/what is happening?
Thanks in advance for any responses
EDIT: Are there any built in logs I can have a look at or anything of that sort to determine what went wrong?
Click to expand...
Click to collapse
I was having issues with mine freezing especially while using the camera.
- Sent From My Xperia Z2 On Bell
acheney1990 said:
I was having issues with mine freezing especially while using the camera.
- Sent From My Xperia Z2 On Bell
Click to expand...
Click to collapse
Ah man. In a way I'm glad to see I'm not alone at least! For some reason mine is mostly random but I've kind of noticed it happens after I pull the charger out. Have you tried to go in and exchange it? If it's the camera causing it, it seems easily reproducible.
@shaf46
Hey Shaf, sorry to bother you mate. I just don't understand what is wrong with this phone! My estimated time on with stamina mode is down to 1 day a few hours again. It is a brand new phone I only got it yesterday. Is it the way I am charging it or is it just buggy software? I don't have any apps I don't need and even tap to wake is off. The battery works normally I guess although it is draining a bit fast (5% in 20 minutes while using it) but I don't understand what could be causing this to happen!
Devzz said:
@shaf46
Hey Shaf, sorry to bother you mate. I just don't understand what is wrong with this phone! My estimated time on with stamina mode is down to 1 day a few hours again. It is a brand new phone I only got it yesterday. Is it the way I am charging it or is it just buggy software? I don't have any apps I don't need and even tap to wake is off. The battery works normally I guess although it is draining a bit fast (5% in 20 minutes while using it) but I don't understand what could be causing this to happen!
Click to expand...
Click to collapse
It's happened to me once where the phone wouldn't switch on after sleeping, turned on after about 2mins, but only when I received my magnetic charger and started charging with it. Not sure if the magnetic charger is the problem since I only had that problem once and never happened since.
Are you charging it with a magnetic charger?
Pesetio said:
It's happened to me once where the phone wouldn't switch on after sleeping, turned on after about 2mins, but only when I received my magnetic charger and started charging with it. Not sure if the magnetic charger is the problem since I only had that problem once and never happened since.
Are you charging it with a magnetic charger?
Click to expand...
Click to collapse
Did you manage to sort it out? No I'm using the standard charger provided but after charging it last night, the estimation of battery time in stamina mode has come down significantly. The estimation assumes stamina mode is not on but it is turned on in my notification bar. This time yesterday the estimate was at ~5 days.

LG v10 Bricked After LG Software Update (Error: Unfortunately, Smart Notice stopped)

Hi All,
Just received my unlocked LG v10 which I purchased on Ebay from Korea. The phone worked perfectly out of the box and then I got on Wi-Fi and checked for updates, and there was an LG Android system update that supposedly addressed bug fixes and improved the stability of apps so naturally I updated. BIG MISTAKE! Now I get a constant pop-up window loop cycle that says 'Unfortunately, Smart Notice stopped'. I am not allowed to post a link to the video I shot of this happening, but it is on Twitter if you want to see, you can DM me. If I tap OK it just pops up again right away.
Can anyone help me with this? I have done a device reset, I have tried to force quit Smart Notice and cleared its cache but nothing works. Also there is no record of this happening online that I could find.
Really upset that after $1,300 AUD this is my first experience with Android and a flagship phone.
Many thanks if you can help.
can you try earse and reset all in Setting ???
midouban87 said:
can you try earse and reset all in Setting ???
Click to expand...
Click to collapse
Thanks for the suggestion. I have already tried that and it makes no difference. I have also cleared the Smart Notice cache (I can't disable it completely).
Have you tried factory reset or booting into recovery and wiping?
Airtioteclint said:
Have you tried factory reset or booting into recovery and wiping?
Click to expand...
Click to collapse
Thanks for your help. I have applied a factory reset, but am unsure how to boot into recovery mode and wiping. I have booted in 'Safe Mode' which disables 3rd party apps but the problem persists. Any pointers would be greatly appreciated.
Also I have downloaded the LG Tools but it does not recognise that the phone is connected and there is no option in the settings menu (which is accessible in between quick taps of the warning message) to mount it as a USB drive.
I appreciate all the suggestions and help. Many thanks.
epictutorials said:
Thanks for your help. I have applied a factory reset, but am unsure how to boot into recovery mode and wiping. I have booted in 'Safe Mode' which disables 3rd party apps but the problem persists. Any pointers would be greatly appreciated.
Also I have downloaded the LG Tools but it does not recognise that the phone is connected and there is no option in the settings menu (which is accessible in between quick taps of the warning message) to mount it as a USB drive.
I appreciate all the suggestions and help. Many thanks.
Click to expand...
Click to collapse
I haven't owned an lg phone in a long time but try holding down the volume down and power button at the same time. (from power off) and wipe all caches.
Airtioteclint said:
I haven't owned an lg phone in a long time but try holding down the volume down and power button at the same time. (from power off) and wipe all caches.
Click to expand...
Click to collapse
Thanks again. I have tried that and sadly it makes no difference. I think this is related to their latest update as it worked perfectly before that. Is it possible to roll back to a previous version?
updated mine tooay. no error message. all well so far
epictutorials said:
Hi All,
Just received my unlocked LG v10 which I purchased on Ebay from Korea. The phone worked perfectly out of the box and then I got on Wi-Fi and checked for updates, and there was an LG Android system update that supposedly addressed bug fixes and improved the stability of apps so naturally I updated. BIG MISTAKE! Now I get a constant pop-up window loop cycle that says 'Unfortunately, Smart Notice stopped'. I am not allowed to post a link to the video I shot of this happening, but it is on Twitter if you want to see, you can DM me. If I tap OK it just pops up again right away.
Can anyone help me with this? I have done a device reset, I have tried to force quit Smart Notice and cleared its cache but nothing works. Also there is no record of this happening online that I could find.
Really upset that after $1,300 AUD this is my first experience with Android and a flagship phone.
Many thanks if you can help.
Click to expand...
Click to collapse
Download the LG mobile support tool and hook it up to that. You can re flash the KDZ file from there.
orthopod4u said:
updated mine tooay. no error message. all well so far
Click to expand...
Click to collapse
That is a relief! I'm glad to hear others are not plagued with the same issue.
Semantics said:
Download the LG mobile support tool and hook it up to that. You can re flash the KDZ file from there.
Click to expand...
Click to collapse
Thanks for the advice. Have downloaded and it says 'No update is available'. I then tried to use the recovery with the phone unplugged and entered the serial and model number, then I plug in the phone but it gives me a warning that the battery isn't sufficiently charged (was at 90%). Currently charing up to 100% to see if that makes a difference and will report back.
Appreciate all the help! What a great forum.
epictutorials said:
Thanks for the advice. Have downloaded and it says 'No update is available'. I then tried to use the recovery with the phone unplugged and entered the serial and model number, then I plug in the phone but it gives me a warning that the battery isn't sufficiently charged (was at 90%). Currently charing up to 100% to see if that makes a difference and will report back.
Appreciate all the help! What a great forum.
Click to expand...
Click to collapse
Hopefully we get you squared away!
Semantics said:
Hopefully we get you squared away!
Click to expand...
Click to collapse
Unfortunately even with battery at 100% and connected to via USB the LG Support Tool still states that there is insufficient battery to perform recovery.
epictutorials said:
Unfortunately even with battery at 100% and connected to via USB the LG Support Tool still states that there is insufficient battery to perform recovery.
Click to expand...
Click to collapse
Try taking the battery out and putting it back in. I've run the tool successfully from within android and not download mode so you might want to try that as well.
Semantics said:
Try taking the battery out and putting it back in. I've run the tool successfully from within android and not download mode so you might want to try that as well.
Click to expand...
Click to collapse
Thank you so much for your continued help.
I tried both suggestions without success. When not in download mode the phone is not recognised and taking the battery out for 60secs and reinserting it didn't seem to make a difference.
I will post this back to LG Korea today and hope it was just a lemon.
epictutorials said:
Thank you so much for your continued help.
I tried both suggestions without success. When not in download mode the phone is not recognised and taking the battery out for 60secs and reinserting it didn't seem to make a difference.
I will post this back to LG Korea today and hope it was just a lemon.
Click to expand...
Click to collapse
You're very welcome, sorry we didn't resolve it. I hope it doesn't take too long to get your new phone back, I receive mine tomorrow. I'm very excited!
Semantics said:
You're very welcome, sorry we didn't resolve it. I hope it doesn't take too long to get your new phone back, I receive mine tomorrow. I'm very excited!
Click to expand...
Click to collapse
Me too. And that is awesome that yours is about to arrive. I can say that before updating it, the experience was very smooth and I absolutely love the dual displays. I'm annoyed I didn't get a chance to test the camera which is the reason I bought it.
Are you importing one from Korea? Look forward to hearing your thoughts on the phone.
Cheers,
Eliot
epictutorials said:
Me too. And that is awesome that yours is about to arrive. I can say that before updating it, the experience was very smooth and I absolutely love the dual displays. I'm annoyed I didn't get a chance to test the camera which is the reason I bought it.
Are you importing one from Korea? Look forward to hearing your thoughts on the phone.
Cheers,
Eliot
Click to expand...
Click to collapse
I'm buying it for the camera as well. I bought it for 599 at T-Mobile in the US, with overnight shipping it should arrive tomorrow. I was going to get a Nexus 6P but the video camera is brutal on that phone. I've had LG phones since the Nexus 4, then Nexus 5, then G2, G3 and now the V10 will be 5th LG in a row. I really do like the LG experience.
Great. I'm glad to hear of a positive LG experience as mine has been anything but that so far, but I'm sure it will be smooth sailing once this silly issue is resolved.
I have a 6p and Xperia Z5 on order as well, and will keep the one I love most and sell the others. Thanks again for your help.
I got a F600S, bought in Korea on the release day. I got the system update on October 20, and I didn't experience any problems since then. I didn't see any great difference either, I have to say.
On the other hand... I don't like Smart Notice, and in general the LG Launcher, so I switched to Nova Launcher before that date.
Have you tried a different launcher? Hopefully that won't trigger Smart notice and you will be safe for now.

Categories

Resources