Hi all
i have iphone 6 clone clone with this spec
Hardware : MT6572 (MT6582 is Fake!)
Model : MG492CH/A
Build number : ALPS.JB3.MP.V1.8
Build date UTC : 20150601-103012
Android v : 4.4.4
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V4, 2013/08/07 10:44
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Tue Jun 2 09:23:29 CST 2015
the problem is, i cannot be able to lock wcdma,
is it hardware limitation or it can be tweak to be able to get 3G?
I phone 6 clone wcdma problem
Ive got the same problem, this fake iphone is locked to 'gsm only'. If you activate flight mode and then deactivate flight mode you will be able to access the network mode and lock it to 'wcdma only' soon after deactivating flight mode. It will register on network and show a symbol "G" at the network bar, however it will revert to 'gsm only' a few seconds later and start showing a "E" at the network bar. Maybe that might work on your alps mg492ch/a, you can try it.
Try *#4636#* and see if you're able to change the mode to WCDMA only
my apple logo is gone can some one help me
akeel1005 said:
my apple logo is gone can some one help me
Click to expand...
Click to collapse
If logo is still on the phone just dial *#0066# and it should be back on.
If you lost apple logo completely from phone, just flash it with SP Flash tools. Load scatter file for your phone (eg. MTK6572 scatter file) and uncheck everything except logo file and click download button. That should fix the problem.
---------- Post added at 05:46 PM ---------- Previous post was at 05:35 PM ----------
popthosegaskets said:
Try *#4636#* and see if you're able to change the mode to WCDMA only
Click to expand...
Click to collapse
Can you help me to fix missing rear camera and torch on Goophone 6 Mtk6572 (mtk6582 is fake!). I was forced to flash my phone so I didn't manage to make stock rom back up. However, I flashed MTK6572 rom, and phone is working fine except I lost mentioned rear camera and torch function. I read on forum that I should replace lib files from stock rom, but unfortunately can't find one.
I was hoping is there some kind of a program or apk to find missing drivers on phone and install them after scan, like on computers.
I'm not an expert like some guys on this forum so I could use any help I get. If I say something incoherent please forgive my ignorance.
Thank you in advance
Here are the specs of the phone:
Phone: Goophone i6
Hardware: MT6572 (MT6582 is Fake!)
Model: iPhone 6s
Build number: ALPS.JB3.MP.V1.
Build date UTC: 20151110-040826
Android v: 4.2.2.
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1.P1. 2013/10/11 16:16
Kernel v: 3.4.5 ([email protected]) (gcc version 4.6x google 20120106 (prerelase) (GCC) #1 SMP Mon Nov 9 17:07:24 CST 2015
Guys I have iPhone 6 cloned and it is totally dead and it was detecting to the system.
Is there any solution guys plz help me
Related
Can someone teach me how to get this firmware...i have 1 phone where hang at samsung after loading.. the problem is i donno how to find that file..already search in google also cannot find.Hope someone can help me
BB Chip : MT6577
MS Board. : qishang77_cu_ics2
IMEI :
Modem Ver. :
MAUI.11AMD.W12.22.SP.V9.P1, 2012/11/20 10:42
Bar code : MT012345678901234567
Build Time : Wed Dec 12 11:19:38 CST 2012
UBoot Ver. : 2010.06
Kernel Ver. :
3.0.13 ([email protected]) (gcc version 4.4.3 (GCC) ) #
1 SMP PREEMPT Wed Dec 12 11:13:29 CST 2012
Android Ver.: 4.0.4
SW Ver. : ALPS.ICS2.MP.V1.9
Custom Build Verno. : release.V2.00
On board when me open show
A661XLTMB0232B
OPC 1298MR
4212 (7) 0305 94V-0
AA
6577-W1B
get me your full specs of the phone i will try to help
Sent from my K-ONE using xda app-developers app
showstopper1 said:
get me your full specs of the phone i will try to help
Sent from my K-ONE using xda app-developers app
Click to expand...
Click to collapse
Actually only that one i can find on that phone ...can you give me any clue where i can get any information by software or anything?
TokeiLampin said:
Actually only that one i can find on that phone ...can you give me any clue where i can get any information by software or anything?
Click to expand...
Click to collapse
i mean your hardware and chipset specs download quadrant from market it will show you the specs and then post here
sent from my canvas2
---------- Post added at 11:00 PM ---------- Previous post was at 10:58 PM ----------
what about your camera and screen res is ur phone dual core wat s the ram?
sent from my canvas2
Actually that only i can get when press button on + volume up and menu button .. coz that phone when press on just load until to word SAMSUNG only...already search phone that model but cannot find any clue...that why me give that board picture.
This what i get with MtkDroidTools ...any idea?
Hardware : MT6577 (SMDK4x12 is Fake!)
Model : GT-l9300
Build number : ALPS.ICS2.MP.V1.9
Build date UTC : 20121212-031938
Android v : 4.0.4
Baseband v: -----
Kernel v : 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 SMP Wed Dec 12 11:13:29 CST 2012
thread: Clone GT-i9300 MT6577 Samsung Logo Stuck solution
take battery out... press and hold volume up and power key insert battery ->select factory mode-> select clear emmc...
Hello guys,
i'm kind of desperate, because i really dont know where to search anymore, so i go ask now.
here are the sad facts:
i got a s4-clone, which should be hdc galaxy s4 lte with mt6589 processor. i bricked it (won't tell how, too retarded), do not have a recovery, but preloader still working. as i try to flash some random rom (as there are many for s4 clones with mt6589 ) using flash tool i always get the same error, telling me the rom is 6589 and target is 6572.
so the first guess is i got a different phone with mt6572 processor, but droidtools reads as follows:
Hardware : MT6589
Model : GT-I9502
Build number : JDQ39.I9502ZSUAMDF
Build date UTC : 20130705-144259
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V1, 2013/06/29 17:32
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Fri Jul 5 22:40:30 CST 2013
i'm stuck at a very disappointing point, because i really dont know what to do anymore as there are no roms for mt6572 to try. does any of you professionals have a guess what to do now? (flash tool and droid tools are latest version)
here you question
http://www.needrom.com/mobile/gt-i9502-clone-s4/
---------- Post added at 08:51 PM ---------- Previous post was at 08:50 PM ----------
here you question
http://www.needrom.com/mobile/gt-i9502-clone-s4/
Guys Please help for
Hardware : MT6575 (UNIVERSAL5410 is Fake!)
Model : GT-I9500
Build number : JDQ39.I9500ZHUAMDE
Build date UTC : 20130618-102612
Android v : 4.2.2
Baseband v: MAUI.11AMD.W12.22.SP.V17, 2013/05/08 11:12
Kernel v : 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 Tue Jun 18 18:24:15 CST 2013
Its always on 2G, even at Mobileuncle Tools, 3G options still cant
and how to repartition internal memory?
its only 500mb meanwhile 2GB useless
try *#*#4636#*#* and phone information and force it onto 3g
bobthecooldad said:
try *#*#4636#*#* and phone information and force it onto 3g
Click to expand...
Click to collapse
Useless it always return to GSM only
should i change rom / kernel? or replace modem.img?
magnacharta said:
Useless it always return to GSM only
should i change rom / kernel? or replace modem.img?
Click to expand...
Click to collapse
you cant put anything but the chinease version or you WILL PERMANENTLY BRICK your device as it will corrupt the boot loader.
You will have to make something yourself or find someone with the same phone and do a rom export (google it)
have you been in the service menu and seen if it works and also can i have a model as it could be down to the bands in your country.
what country are you from as your phone only has the 2100mhz band
http://www.worldtimezone.com/gsm.html
This website has the bands so find your country and it might not be supported as cheaper phones don't need to have all the 3g band's
i went to mobile uncle tools - bandmode
GSM mode (all selectable)
EGSM900, DCS1800, PCS1900 GSM850
Meanwhile
All UMTS mode is colored gray, cant select it
WCDMA-IMT-2000, WCDMA-PCS-1900, WCDMA-DCS-1800, WCDM-AWS-1700, WCDMA-CLR-850, WCDMA-800, WCDMA-IMT-E-2600, WCDMA-GSM-900,WCDMA-1800, WCDMA-1700 (all cant select)
i've check my Friend Note 2 Clone(MT6575 (SMDK4x12 is Fake!) model GT-7100),
its able to connect 3G coz it able to select
WCDMA-IMT-2000, WCDMA-CLR-850, WCDMA-800, WCDMA-GSM-900
Im in Indonesia btw
I’ve tried SPF using another S4 Clone rom, but always stuck on scatter files
“Access violation at address 0FA910A0 in module ‘FLASHTOOLLIB.DLL’. Read of address 00000000.”
When I use my own scatter files. After SPF process, its wont booting
My lcd is glowing but nothing happen
any idea?
Bump. Ive got the same phone and 3G is not working, cannot select the box.
Any news ?
how may I help?
I have a stock rom for
Hardware : MT6575 (UNIVERSAL5410 is Fake!)
Model : GT-I9500
Build number : JDQ39.I9500ZHUAMDE
Build version : 1377656106
Android v : 4.2.2
Baseband v: MAUI.11AMD.W12.22.SP.V17, 2013/05/08 11:12
Kernel v : 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC) ) 1313 v53 Wed Aug 28 14:56 CST 2013
RAM: 2gb
ROM: 2.5gb
working 3g
air gesture one direction only
will upload it if you still need it.
magnacharta said:
i went to mobile uncle tools - bandmode
GSM mode (all selectable)
EGSM900, DCS1800, PCS1900 GSM850
Meanwhile
All UMTS mode is colored gray, cant select it
WCDMA-IMT-2000, WCDMA-PCS-1900, WCDMA-DCS-1800, WCDM-AWS-1700, WCDMA-CLR-850, WCDMA-800, WCDMA-IMT-E-2600, WCDMA-GSM-900,WCDMA-1800, WCDMA-1700 (all cant select)
i've check my Friend Note 2 Clone(MT6575 (SMDK4x12 is Fake!) model GT-7100),
its able to connect 3G coz it able to select
WCDMA-IMT-2000, WCDMA-CLR-850, WCDMA-800, WCDMA-GSM-900
Im in Indonesia btw
I’ve tried SPF using another S4 Clone rom, but always stuck on scatter files
“Access violation at address 0FA910A0 in module ‘FLASHTOOLLIB.DLL’. Read of address 00000000.”
When I use my own scatter files. After SPF process, its wont booting
My lcd is glowing but nothing happen
any idea?
Click to expand...
Click to collapse
Have the exact same problem. Did you find a solution??
magnacharta said:
Guys Please help for
Hardware : MT6575 (UNIVERSAL5410 is Fake!)
Model : GT-I9500
Build number : JDQ39.I9500ZHUAMDE
Build date UTC : 20130618-102612
Android v : 4.2.2
Baseband v: MAUI.11AMD.W12.22.SP.V17, 2013/05/08 11:12
Kernel v : 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC) ) #1 Tue Jun 18 18:24:15 CST 2013
Its always on 2G, even at Mobileuncle Tools, 3G options still cant
and how to repartition internal memory?
its only 500mb meanwhile 2GB useless
Click to expand...
Click to collapse
Do not go for Repartitioning Internal Memoryas few 100 MBs won't do you any good.
better to swap internal user memory with the External SD if your phone support one but you won't be able to run applications with high resource requirements eg. Asphalt 8 or GTA, etc.
huckuchie said:
I have a stock rom for
Hardware : MT6575 (UNIVERSAL5410 is Fake!)
Model : GT-I9500
Build number : JDQ39.I9500ZHUAMDE
Build version : 1377656106
Android v : 4.2.2
Baseband v: MAUI.11AMD.W12.22.SP.V17, 2013/05/08 11:12
Kernel v : 3.0.13 ([email protected]) (gcc version 4.4.3 (GCC) ) 1313 v53 Wed Aug 28 14:56 CST 2013
RAM: 2gb
ROM: 2.5gb
working 3g
air gesture one direction only
will upload it if you still need it.
Click to expand...
Click to collapse
hi there ive read and would like to request for the copy of that rom. cause i have the same problem.
Hello everyone, i'm seeking for some help to unbrick my phone.. i looked for alot of roms but none of them works on my phone, only this rom but i have problem on display can't see anything, if i change uboot.bin (lk.bin) file the screen sometimes turn to white or gray, but what gives me hope i can hear my phone voice when it open and close its seems work fine but the screen don't show anything please help me.
My phone is : MT6572 S00
The only rom that works for me but i have (gives me) display problem :
needrom / download / samsung-gt-i9500-mt6572-s00-mt6589-is-fake /
My phone info (my phone EMMC, not NAND): ( photos attached )
Hardware : MT6572 (MT6589 is Fake!)
Model : GT-I9500
Build number : ALPS.JB3.MP.V1.8
Build date UTC : 20140311-123446
Android v : 4.4.4
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V4, 2013/08/07 10:44
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Thu Mar 13 10:52:19 CST 2014
help please
Anyone here can help me please :/
I have the same problem Bro. check out my thread.
Samsung S4 clone MT6572 (MT6589 is Fake!)
rohltony said:
Hello everyone, i'm seeking for some help to unbrick my phone.. i looked for alot of roms but none of them works on my phone, only this rom but i have problem on display can't see anything, if i change uboot.bin (lk.bin) file the screen sometimes turn to white or gray, but what gives me hope i can hear my phone voice when it open and close its seems work fine but the screen don't show anything please help me.
My phone is : MT6572 S00
The only rom that works for me but i have (gives me) display problem :
needrom / download / samsung-gt-i9500-mt6572-s00-mt6589-is-fake /
My phone info (my phone EMMC, not NAND): ( photos attached )
Hardware : MT6572 (MT6589 is Fake!)
Model : GT-I9500
Build number : ALPS.JB3.MP.V1.8
Build date UTC : 20140311-123446
Android v : 4.4.4
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V4, 2013/08/07 10:44
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Thu Mar 13 10:52:19 CST 2014
Click to expand...
Click to collapse
[Q] [SOS][Galaxy s4 MTK6572] Error 4032 (Enable DRAM FAILED) when trying to flash
I have the same phone totaly briced now. every tray too flash or format.. I got Error 4032... Every XDA please help
I guess i need the right lcd driver till now i can't find anything
Friends,
I got this phone to me from a friend to block the pop-up ads and auto updates and auto installtions of unwanted software in this phone. I tired a lot but could not find the original ROM for this phone through out the web. I have connected the phone to PC and when I accessed the phone using MTK DROIDTOOLS, the info shown in that window is as follows.
Hardware : MT6582 (MT8382 is Fake!)
Model : Genius Talk T4
Build number : MT83X2_MR590_MR5902H1CW1.2014053010
Build date UTC : 20140530-020854
Android v : 4.2.2
Baseband v: MOLY.WR8.W1315.MD.WG.MP.V18, 2013/11/29 20:19
Kernel v : 3.4.5 ([email protected]) (gcc version 4.6.x-google 20120106 (prerelease) (GCC) ) #1 SMP Fri May 30 10:03:00 HKT 2014
Uboot build v : -----
LCD Driver IC : 1-hx8389b_dsi_vdo
Except the LCD driver IC, since almost all the info reveals as per GIONEE P4, I tried to install that OS in this mobile and then it got soft-bricked.
Request the developers based on the MTKDROIDTOOLS info, to please provide me a better solution where I can flash through the PC.. (not through SD Card as the mobile is in OFF condition.
Same problem
hello, I have the same problem, the phone is the same. I can not find a firmware because they are practical, it continues to have banner ads. Can someone help me?
You have this issue posted more than once. Thread closed.
Droidriven
Forum Moderator