Can someone help me pleasee? my phone doesnt work after i flashed Jmz Kernel and i forgot to do a backup of my kernel, can someone help me please???? Please send me your kernel
first give some information about your phone like rom version, country.
porozex said:
first give some information about your phone like rom version, country.
Click to expand...
Click to collapse
Im using the UK one
kingjo23 said:
Im using the UK one
Click to expand...
Click to collapse
You can try to flash the attached A3UL_1.31.xxx.3_Kernel+wp_mod.zip. It's compiled by me from latest UK kernel sources on htcdev.
MiniBlu
MiniBlu said:
You can try to flash the attached A3UL_1.31.xxx.3_Kernel+wp_mod.zip. It's compiled by me from latest UK kernel sources on htcdev.
MiniBlu
Click to expand...
Click to collapse
Thanks for your help, now my WiFi and Bluetooth doesn't work, it says not in range even though it is.
Do you know how to fix that? Please help me.....
kingjo23 said:
Can someone help me pleasee? my phone doesnt work after i flashed Jmz Kernel and i forgot to do a backup of my kernel, can someone help me please???? Please send me your kernel
Click to expand...
Click to collapse
I had the same problem. I flashed the asian rom and now i have no issues with it.
kingjo23 said:
Thanks for your help, now my WiFi and Bluetooth doesn't work, it says not in range even though it is.
Do you know how to fix that? Please help me.....
Click to expand...
Click to collapse
What software version is your phone actually running? To find this go into "settings", "about", "software information" and tell me the "software number" and "rom version". As long as these numbers match up with the kernel then then I can add in the wifi drivers that get compiled at the time the kernel is compiled into the zip but this shouldn't really be required and didn't want to put them in wiith out being sure they would match with the rest of your rom.
Also after flashing a kernel sometimes things left over in cache and dalvic cache from running the old kernel causes problems with wifi. To fix this you can try to go into recovery and choose "wipe", "advanced wipe" and check the "cache", and "dalvic cache" boxes then wipe. Also reboot your router.
Can you also check that the kernel flashed properly. Go into "settings", "software information", "more" and tell me what is listed under "kernel version".
MiniBlu
Ruman911 said:
I had the same problem. I flashed the asian rom and now i have no issues with it.
Click to expand...
Click to collapse
Can You send me the link please, i can find the correct one because there are many backups, thanks for your time and support.
MiniBlu said:
What software version is your phone actually running? To find this go into "settings", "about", "software information" and tell me the "software number" and "rom version". As long as these numbers match up with the kernel then then I can add in the wifi drivers that get compiled at the time the kernel is compiled into the zip but this shouldn't really be required and didn't want to put them in wiith out being sure they would match with the rest of your rom.
Also after flashing a kernel sometimes things left over in cache and dalvic cache from running the old kernel causes problems with wifi. To fix this you can try to go into recovery and choose "wipe", "advanced wipe" and check the "cache", and "dalvic cache" boxes then wipe. Also reboot your router.
Can you also check that the kernel flashed properly. Go into "settings", "software information", "more" and tell me what is listed under "kernel version".
MiniBlu
Click to expand...
Click to collapse
My kernel version is 3.4.0-g5ad..........
.... [email protected] #1
kingjo23 said:
My kernel version is 3.4.0-g5ad..........
.... [email protected] #1
Click to expand...
Click to collapse
In that case the kernel I sent you didn't flash properly as its not a jmz kernel. probably just the modules flashed. I'll test it again here and repost it for you. can tou still check and tell what you sofware number and rom version are? You can find them where I said in the last post.
MiniBlu said:
In that case the kernel I sent you didn't flash properly as its not a jmz kernel. probably just the modules flashed. I'll test it again here and repost it for you. can tou still check and tell what you sofware number and rom version are? You can find them where I said in the last post.
Click to expand...
Click to collapse
I attached a screenshot of my details now, I reflashed your kernel but still no changes
kingjo23 said:
I attached a screenshot of my details now, I reflashed your kernel but still no changes
Click to expand...
Click to collapse
Ok. I dropped the wrong boot img in the zip. thats the asia kernel. but can you screenshot the page before the one you attached. thats the page that shows your sofware number and rom version. That will tell me the propper boot img to give you.
MiniBlu said:
Ok. I dropped the wrong boot img in the zip. thats the asia kernel. but can you screenshot the page before the one you attached. thats the page that shows your sofware number and rom version. That will tell me the propper boot img to give you.
Click to expand...
Click to collapse
Sorry for replying late was at work
MiniBlu said:
Ok. I dropped the wrong boot img in the zip. thats the asia kernel. but can you screenshot the page before the one you attached. thats the page that shows your sofware number and rom version. That will tell me the propper boot img to give you.
Click to expand...
Click to collapse
here is the screenshot
kingjo23 said:
here is the screenshot
Click to expand...
Click to collapse
your acctually currently runing a stock asia rom which I asume you must have flashed my original asia backup at some point but for best compatibility on a uk phone I sugest you flash an eu rom(at least the major version matches what you phone should be running). You can download one here:
https://drive.google.com/file/d/0B_C-OhmCtZWAZE9PUlFSdWtWaXc/view?usp=sharing
-first in twrp select wipe and swipe to factory reset(you may get conflicts if you don't)
-flash the the file linked above
-wipe dalvic & cache
-reboot
-setup wifi and google account
-test everything is working ok
-follow instructions on this thread http://forum.xda-developers.com/desire-610/development/mod-wpmod-disable-write-protection-t3149168 to get root and disable write protection on the system patition
you will then be able to apply fixes and mods to the rom without complicated recovery procedures.(take a full backup before trying modifications so you have a stable point to go back to).
MiniBlu
MiniBlu said:
your acctually currently runing a stock asia rom which I asume you must have flashed my original asia backup at some point but for best compatibility on a uk phone I sugest you flash an eu rom(at least the major version matches what you phone should be running). You can download one here:
https://drive.google.com/file/d/0B_C-OhmCtZWAZE9PUlFSdWtWaXc/view?usp=sharing
-first in twrp select wipe and swipe to factory reset(you may get conflicts if you don't)
-flash the the file linked above
-wipe dalvic & cache
-reboot
-setup wifi and google account
-test everything is working ok
-follow instructions on this thread http://forum.xda-developers.com/desire-610/development/mod-wpmod-disable-write-protection-t3149168 to get root and disable write protection on the system patition
you will then be able to apply fixes and mods to the rom without complicated recovery procedures.(take a full backup before trying modifications so you have a stable point to go back to).
MiniBlu
Click to expand...
Click to collapse
I did as you said and now my WifI TURNED ON HAHA Thanks for your help, im really grateful to you
My WiFi says not in in range even though it is, it doesn't see any other network too, it was working really fine yesterday and now it doesn't work anymore.
Related
Here we go...new thread we can use, and hopefully get you back up and running soon..
Let me know when you get here...g
ok yes I have odin 3, and yes i updated drivers last night so we are good to go
okay.... excellent..stand by...I'm going to link and build the files you'll need...g
gregsarg said:
okay.... excellent..stand by...I'm going to link and build the files you'll need...g
Click to expand...
Click to collapse
ok sounds good.. thank you soo much
Jblakeley said:
ok sounds good.. thank you soo much
Click to expand...
Click to collapse
Before we go any further.....you are stock ICS ? using the 3.0.8 stock ICS kernel ?
We should try something else before the downgrade....as you "technically" have the wrong baseband version for TMO...
We need to get you rooted again, and flash up a new radio....first...to test network...
now I know the blaze radio got you stuck, but believe it or not...you need it to run the ATT note, on the TMO network...
Are you familiar with the ICS root process ?
It's too easy...simply push CWM .tar file to the device via Odin, then we can flash the baseband and test.....
quite possibly eliminating the need for much more work...g
gregsarg said:
Before we go any further.....you are stock ICS ? using the 3.0.8 stock ICS kernel ?
We should try something else before the downgrade....as you "technically" have the wrong baseband version for TMO...
We need to get you rooted again, and flash up a new radio....first...to test network...
now I know the blaze radio got you stuck, but believe it or not...you need it to run the ATT note, on the TMO network...
Are you familiar with the ICS root process ?
It's too easy...simply push CWM .tar file to the device via Odin, then we can flash the baseband and test.....
quite possibly eliminating the need for much more work...g
Click to expand...
Click to collapse
yes i do and already have the files saved to the sd card as we tried this process last night to no avail.. i flashed cwm through odin last night and then tried all 3 ics tmo radios.. nothing worked..
Jblakeley said:
yes i do and already have the files saved to the sd card as we tried this process last night to no avail.. i flashed cwm through odin last night and then tried all 3 ics tmo radios.. nothing worked..
Click to expand...
Click to collapse
Okay then...
lets back door the phone.....with the GB.....http://forum.xda-developers.com/showthread.php?t=1506330
stand by...g
Edit:
here is the stock.tar for GB....
You must first...(required by me...LOL) wipe data, and factory reset the device....
Then, push this GB .tar image to your phone via Odin...
Just to clarify: you do this at your own risk....as this image will force restore the device to a stock ATT I717 GB rom.....
let me know when you are done with the flash...then we do step 2....g
Edit: 2....it is wise to format the emmc partition prior to using this method, to clean the ICS files from the device...this is done in CWM....it's not required...but helps...IMHO
gregsarg said:
Okay then...
lets back door the phone.....with the GB.....http://forum.xda-developers.com/showthread.php?t=1506330
stand by...g
Edit:
here is the stock.tar for GB....
You must first...(required by me...LOL) wipe data, and factory reset the device....
Then, push this GB .tar image to your phone via Odin...
Just to clarify: you do this at your own risk....as this image will force restore the device to a stock ATT I717 GB rom.....
let me know when you are done with the flash...then we do step 2....g
Edit: 2....it is wise to format the emmc partition prior to using this method, to clean the ICS files from the device...this is done in CWM....it's not required...but helps...IMHO
Click to expand...
Click to collapse
ok, how do you wipe data and factory reset without root.. is it factory data reset? and how to format emmc?
Just factory reset....if you dont have root,,,you cant format the emmc...
It'll do....
we'll full wipe after you get GB flashed....g
Okay...once you get GB pushed over...
then you need the CWM recovery....
Push it after you push the GB rom. but remember...you must allow the device to reboot after each flash, and then return to download mode again..
It's slow...but it's required....
After you get CWM pushed.....and booted, then we will go into CWM and do some house keeping on the EMMC....
followed by this:
http://www.4shared.com/zip/0zahxvtc/033112.html?
That is the radio image we are going to flash in CWM...and if we get lucky, It's gonna fix this mess for you....
I'll wait here....tap, tap, tap, tap.......LOL....g
ok flashed it..
android version: 2.3.6
bb version: i717uclf6
kernel version:2.6.35.11
build #: gingerbread.ucla1
---------- Post added at 01:37 PM ---------- Previous post was at 01:32 PM ----------
ok 2.3.6 installed and cwm flashed.. now what lol
Okay......now we need the CWM recovery....
so back into download mode, and Odin push this:http://forum.xda-developers.com/showthread.php?t=1526431
It's the top recovery on the first page...just click the "odin" version, and it will download the correct CWM.tar image...then flash that sucker....g
edit: yur fast...LOL
Now, we need to boot into CWM.....
then, wipe data, factory reset.......
then wipe cache, dalvik cache, battery stats....
then...and here is the scary part...
In the advanced menu options, you will find the option to format "EMMC"....do it...then reboot from the CWM screen.....g
After the EMMC wipe and reboot....you are going to flash this radio image in CWM...
Sorry for the reboot, but it was needed to flush the memory, and repopulate the Emmc with only the rom specific data needed to boot....http://www.4shared.com/zip/0zahxvtc/033112.html?
ok im in advanced menu.. there is no format emmc option
reboot recovery
wipe dalvik
wipe battery
report error
key test
show log
partition sd card
fix permission
go back
Jblakeley said:
ok im in advanced menu.. there is no format emmc option
reboot recovery
wipe dalvik
wipe battery
report error
key test
show log
partition sd card
fix permission
go back
Click to expand...
Click to collapse
Okay...you have a different CWM version...thats okay...lets flash the radio image in CWM, and see if you get service...
this radio is a base TMO image, no frills, but is compatible with your network...and if service is available, you'll get it after the flash and reboot...
http://www.4shared.com/zip/0zahxvtc/033112.html?
tense drama, lads!
Ok. I felt the need to chime in here. G, you are going above and beyond and just wanted to say thank you for all those folks who need help! Although XDA isn't a help hotline, it's people like you that help spread the fun and excitement in the mobile electronics realm. I do what I can but you sir are taking it to another level. I know there's more like you but since I've followed this from the beginning, you get my thanks!
Glad you're here.
Sent from my SGH-I717 using xda app-developers app
rangercaptain said:
tense drama, lads!
Click to expand...
Click to collapse
i'm gonna stroke out...LOL:laugh:
dakleenupman said:
Ok. I felt the need to chime in here. G, you are going above and beyond and just wanted to say thank you for all those folks who need help! Although XDA isn't a help hotline, it's people like you that help spread the fun and excitement in the mobile electronics realm. I do what I can but you sir are taking it to another level. I know there's more like you but since I've followed this from the beginning, you get my thanks!
Glad you're here.
Sent from my SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
It's what I do......:good:
Many thanks for the kind words....g
gregsarg said:
Okay...you have a different CWM version...thats okay...lets flash the radio image in CWM, and see if you get service...
this radio is a base TMO image, no frills, but is compatible with your network...and if service is available, you'll get it after the flash and reboot...
http://www.4shared.com/zip/0zahxvtc/033112.html?
Click to expand...
Click to collapse
Negative ghost rider ... No SIM Emergency Calls Only...
I just flashed cm-10.1.1-mdm02 onto my phone and I am having the "can't send MMS" issue. I would love to follow the fix supplied in the CyanogenMod 10.1 Official Releases thread, but I do not have the "CDMA subscription" or anything that even says "LTE" in the "preferred network mode. See Attachements Below.
Is this something that has been seen?
... And yes, I went a little overoard with my use of quotes
evolwun said:
I just flashed cm-10.1.1-mdm02 onto my phone and I am having the "can't send MMS" issue. I would love to follow the fix supplied in the CyanogenMod 10.1 Official Releases thread, but I do not have the "CDMA subscription" or anything that even says "LTE" in the "preferred network mode. See Attachements Below.
Is this something that has been seen?
... And yes, I went a little overoard with my use of quotes
Click to expand...
Click to collapse
That does not look like mdm02 (or any of my releases actually). If you came from another cm-based ROM, you may need to wipe /system before flashing. It should look like the attached picture.
mdmower said:
That does not look like mdm02 (or any of my releases actually). If you came from another cm-based ROM, you may need to wipe /system before flashing. It should look like the attached picture.
Click to expand...
Click to collapse
Nope, I have ONLY been using your CM roms since you came out with them. I have jumped around releases quite a bit though.
here is a screenshot of the build info
evolwun said:
here is a screenshot of the build info
Click to expand...
Click to collapse
kernel 3.0.71 tells me you haven't updated the kernel since the end of March. Extract boot.img from the cm zip and flash it:
Code:
fastboot flash boot boot.img
If you're running any modifications to cyanogenmod, they can also mess with the displayed settings. If you have any applications installed that supposedly give you more network options, uninstall them.
mdmower said:
kernel 3.0.71 tells me you haven't updated the kernel since the end of March. Extract boot.img from the cm zip and flash it:
Code:
fastboot flash boot boot.img
If you're running any modifications to cyanogenmod, they can also mess with the displayed settings. If you have any applications installed that supposedly give you more network options, uninstall them.
Click to expand...
Click to collapse
I just downloaded the mdm03 rom and flashed it as well as the boot.img from that .zip... no change. Am I looking a full wipe on this one?
BTW, thanks for the help on this.
evolwun said:
I just downloaded the mdm03 rom and flashed it as well as the boot.img from that .zip... no change. Am I looking a full wipe on this one?
BTW, thanks for the help on this.
Click to expand...
Click to collapse
Try this: in recovery...
make a full backup
wipe only /system
install build mdm03
install gapps
mdmower said:
Try this: in recovery...
make a full backup
wipe only /system
install build mdm03
install gapps
Click to expand...
Click to collapse
Still nothing, I thought that sounded like a great suggestion.
evolwun said:
Still nothing, I thought that sounded like a great suggestion.
Click to expand...
Click to collapse
Since you have a full backup, the next check would be to wipe /data, /cache, and /system, then install CM and see if the menu options appear like in my screenshot.
mdmower said:
Since you have a full backup, the next check would be to wipe /data, /cache, and /system, then install CM and see if the menu options appear like in my screenshot.
Click to expand...
Click to collapse
Will do, I'll do it tomorrow during the day and post up the results.
are you s-on with a locked bootloader?
I did a full wipe and everything is working fine. I love the fact that I can restore app data from titanium backup. I need to be more careful about keeping my boot.img up to date.
Messaging no worky MD04
evolwun said:
I did a full wipe and everything is working fine. I love the fact that I can restore app data from titanium backup. I need to be more careful about keeping my boot.img up to date.
Click to expand...
Click to collapse
I cannot send SMS or MMS messages...
Following instructions in this thread I did a TWRP Recovery/factory reset, flashed and reinstalled md04, it was working for awhile.
Proceeded to install my apps, somewhere along the way SMS died.
Also I now see as one other in this thread; under Settings/More/Mobile Networks - Preferred Network mode is LTE / WCDMA, if that is selected there are no options displayed that include "LTE"
LeonMBarnes said:
I cannot send SMS or MMS messages...
Following instructions in this thread I did a TWRP Recovery/factory reset, flashed and reinstalled md04, it was working for awhile.
Proceeded to install my apps, somewhere along the way SMS died.
Also I now see as one other in this thread; under Settings/More/Mobile Networks - Preferred Network mode is LTE / WCDMA, if that is selected there are no options displayed that include "LTE"
Click to expand...
Click to collapse
Can you connect to the network? If so, is your CDMA subscription set to RUIM/SIM?
--
also check Radio Information.
1. Go to dialer and enter: *#*#4636#*#*
2. Phone Information
3. Let preferred network type:
4. LTE/CDMA (PRL) (if not set to this, set it to this)
vazersecurity said:
Can you connect to the network? If so, is your CDMA subscription set to RUIM/SIM?
--
also check Radio Information.
1. Go to dialer and enter: *#*#4636#*#*
2. Phone Information
3. Let preferred network type:
4. LTE/CDMA (PRL) (if not set to this, set it to this)
Click to expand...
Click to collapse
I think this is solved.
Trying different things, found that when the system has a fresh MD04, go to Settings/More/Mobile Networks/Network Mode - changed to "LTE/CDMA/EvDo". Since then it is behaving and SMS is working, Also I checked the Radio info per instructions above, it shows "LTE/CDMA auto (PRL)".
All is good for now. :fingers-crossed:
Thanks again.
Hello XDA members,
I was hoping somebody would help me out, I'm fairly new when it comes to installing custom roms so I require your patience. I don't know how to install a custom rom onto my Bell Atrix HD MB886, everytime I try it says abortion failed, what can I do to fix this. I have wiped data and all that probably 5 times in the past week alone. I would like to know how to successfully install roms without errors. Both the times that I have done this I had my bootloader unlocked, and I had clockword recovery mod latest version 6.0.4.4. I bought an SD card today to help install the roms because otherwise I can't do it from my internal storage. I really hope somebody can help me out.
Regards,
Roger
riekkir said:
Hello XDA members,
I was hoping somebody would help me out, I'm fairly new when it comes to installing custom roms so I require your patience. I don't know how to install a custom rom onto my Bell Atrix HD MB886, everytime I try it says abortion failed, what can I do to fix this. I have wiped data and all that probably 5 times in the past week alone. I would like to know how to successfully install roms without errors. Both the times that I have done this I had my bootloader unlocked, and I had clockword recovery mod latest version 6.0.4.4. I bought an SD card today to help install the roms because otherwise I can't do it from my internal storage. I really hope somebody can help me out.
Regards,
Roger
Click to expand...
Click to collapse
Hi there. A failed abortion certainly seems like an issue... I guess I am not totally clear on the status here. You say that you had CWM. Do you still have it? Bootloader is still unlocked? What rom are you trying to install? Are you certain it's for the Bell version and not like the AT&T one? What is the exact error message?
es0tericcha0s said:
Hi there. A failed abortion certainly seems like an issue... I guess I am not totally clear on the status here. You say that you had CWM. Do you still have it? Bootloader is still unlocked? What rom are you trying to install? Are you certain it's for the Bell version and not like the AT&T one? What is the exact error message?
Click to expand...
Click to collapse
No I don't have it atm as I just wiped the data/cache last night but will I already have CWM, I just need to unlock the bootloader and try again...I'm trying to install this one:
Android 4.4.2 KitKat Mokee Rom, and it says the version is a nightly. Yes I'm positive it's the Bell Version as I purchased it at a Bell Store and my carrier is Bell. The error message is "Installation Aborted." It begins installing, and then halfway through I get that error message. How do I fix this?
I figured you knew what phone you had. I was wondering if you had a rom built for the Bell version vs an ATT one. But since you are using a CM based rom, it obviously doesn't matter. Curious as to why you are bothering with relocking the bootloader? But I suggest to either try a different version of the rom, or to change your recovery to one of the Philz Touch versions as that's what some of the other users in that thread for the rom for your phone were using. You can find them here:
http://goo.im/devs/philz_touch/CWM_Advanced_Edition/moto_msm8960
es0tericcha0s said:
I figured you knew what phone you had. I was wondering if you had a rom built for the Bell version vs an ATT one. But since you are using a CM based rom, it obviously doesn't matter. Curious as to why you are bothering with relocking the bootloader? But I suggest to either try a different version of the rom, or to change your recovery to one of the Philz Touch versions as that's what some of the other users in that thread for the rom for your phone were using. You can find them here:
Click to expand...
Click to collapse
No I was bothering to unlock it again, not lock it. Where can I find different versions for the 4.4.2 Mokee Rom? I've tried using the Philz Touch version: Motorola Atrix HD One Click Philz recovery installer and when I tried it a couple of times it said it failed to install although I'm not sure why. I came across these images the other day but how do I use the .img files on my device, as I'm not sure to proceed from here once I have them downloaded.
riekkir said:
No I was bothering to unlock it again, not lock it. Where can I find different versions for the 4.4.2 Mokee Rom? I've tried using the Philz Touch version: Motorola Atrix HD One Click Philz recovery installer and when I tried it a couple of times it said it failed to install although I'm not sure why. I came across these images the other day but how do I use the .img files on my device, as I'm not sure to proceed from here once I have them downloaded.
Click to expand...
Click to collapse
I was curious as why you relocked it in the first place.
Where are you getting Mokee from that doesn't have a link to their Downloads?
http://forum.xda-developers.com/showthread.php?t=2619489
For installing recovery:
http://forum.xda-developers.com/showthread.php?t=2262726
es0tericcha0s said:
I was curious as why you relocked it in the first place.
Where are you getting Mokee from that doesn't have a link to their Downloads?
For installing recovery:
Click to expand...
Click to collapse
thanks will try this out and let you know later how it works! I download the custom rom from true android blogspot.ca (can't post links just yet, annoying).
riekkir said:
thanks will try this out and let you know later how it works! I download the custom rom from true android blogspot.ca (can't post links just yet, annoying).
Click to expand...
Click to collapse
Right on. Well, you should bookmark the thread here on XDA because that's typically where the action happens.
es0tericcha0s said:
Right on. Well, you should bookmark the thread here on XDA because that's typically where the action happens.
Click to expand...
Click to collapse
Okay so I'm trying it now and the program won't even open :/
Odd. I just downloaded it to test and I didn't have any issues. If you can't get the actual application / exe file to open, then just use the Main-Skip.bat. Does the same thing.
If it doesn't open still, make sure that you have your anti-virus off as sometimes those interfere with programs like this. Might also try as admin.
es0tericcha0s said:
Odd. I just downloaded it to test and I didn't have any issues. If you can't get the actual application / exe file to open, then just use the Main-Skip.bat. Does the same thing.
If it doesn't open still, make sure that you have your anti-virus off as sometimes those interfere with programs like this. Might also try as admin.
Click to expand...
Click to collapse
Okay I wasn't looking at the actual .exe sorry, I got it to work and all I installed the Philz One Touch Recovery from that program, just downloaded a different rom and all and then I select the apply update from external storage and when it gets to the verifying update package, it gave me the same error message as yesterday, Installation Aborted.
So again, how do I fix this, am I doing something wrong? Why won't my custom rom install?
riekkir said:
Okay I wasn't looking at the actual .exe sorry, I got it to work and all I installed the Philz One Touch Recovery from that program, just downloaded a different rom and all and then I select the apply update from external storage and when it gets to the verifying update package, it gave me the same error message as yesterday, Installation Aborted.
So again, how do I fix this, am I doing something wrong? Why won't my custom rom install?
Click to expand...
Click to collapse
I don't think that is the most updated version. What's the version number of the recovery that was installed? It should be listed on the main page of it when you boot there. I was suggesting to use one of the new ones. It might have something to do with the SELinux support that KK roms need. You just have to put the img file in the tools folder and rename the new one the same. But here's no other error that shows up other than Installation Aborted? I was thinking usually it would have an error code or some other message.Have you checked the md5 of the rom zip to make sure it's not corrupted (if the dev provided it)?
es0tericcha0s said:
I don't think that is the most updated version. What's the version number of the recovery that was installed? It should be listed on the main page of it when you boot there. I was suggesting to use one of the new ones. It might have something to do with the SELinux support that KK roms need. You just have to put the img file in the tools folder and rename the new one the same. But here's no other error that shows up other than Installation Aborted? I was thinking usually it would have an error code or some other message.Have you checked the md5 of the rom zip to make sure it's not corrupted (if the dev provided it)?
Click to expand...
Click to collapse
Use one of the new versions of that program or to use the latest CWM which I have been. Okay I really don't know how to do that and where to move it to, how do I do such a thing? No it just says Installation Aborted... How would I do that? And yes I downloaded the new rom directly from his site.
riekkir said:
Use one of the new versions of that program or to use the latest CWM which I have been. Okay I really don't know how to do that and where to move it to, how do I do such a thing? No it just says Installation Aborted... How would I do that? And yes I downloaded the new rom directly from his site.
Click to expand...
Click to collapse
Look in the tools folder of the zip you downloaded. Download the newest Philz Touch img from the other link from earlier. Rename it to replace the one in the tools folder. Redo the recovery install. But you didn't say what version you already have.
es0tericcha0s said:
Look in the tools folder of the zip you downloaded. Download the newest Philz Touch img from the other link from earlier. Rename it to replace the one in the tools folder. Redo the recovery install. But you didn't say what version you already have.
Click to expand...
Click to collapse
Okay that did the trick, properly got philz recovery installed, did the install again, this time it worked, clicked reboot and now it's stuck at the Dual Core bootlogo screen
riekkir said:
Okay that did the trick, properly got philz recovery installed, did the install again, this time it worked, clicked reboot and now it's stuck at the Dual Core bootlogo screen
Click to expand...
Click to collapse
Did you do a full wipe, including wiping /system?
If you didn't, it should be under Mounts and Storage > Format /system of something of that sort.
es0tericcha0s said:
Did you do a full wipe, including wiping /system?
If you didn't, it should be under Mounts and Storage > Format /system of something of that sort.
Click to expand...
Click to collapse
No I forgot to do that dammit, can't get into recovery mode and my computer doesn't recognize my phone now, think I bricked it.
riekkir said:
No I forgot to do that dammit, can't get into recovery mode and my computer doesn't recognize my phone now, think I bricked it.
Click to expand...
Click to collapse
Pop the battery out for a bit, then pop it back in and hold Volume Down while powering up. Should get you into fastboot where you can skip to the recovery.
es0tericcha0s said:
Pop the battery out for a bit, then pop it back in and hold Volume Down while powering up. Should get you into fastboot where you can skip to the recovery.
Click to expand...
Click to collapse
The battery doesn't come out of my phone as you can't take the back off. I got into fast boot easily them selected recovery and nothing happened, I think my phone is screwed
riekkir said:
The battery doesn't come out of my phone as you can't take the back off. I got into fast boot easily them selected recovery and nothing happened, I think my phone is screwed
Click to expand...
Click to collapse
Oh yea, forgot you have to undo the screws on the bottom. So you scroll down to hit recovery and use the Power button to select and it doesn't do anything? That's odd.. Try and reflash the recovery since you can still get to fastboot. If that doesn't work, you're not totally screwed since you can still get to fastboot, that means you should be able to restore it to stock and start over.
Alternatively, if you have fastboot set up, you could make sure that philz touch is in the fastboot folder and use this command:
fastboot boot recovery nameofphilztouchfile.img
If you don't have fastboot, then just grab this one: http://forum.xda-developers.com/showthread.php?t=2317790 , drop the recovery img in that folder and open the CMD prompt on your computer and change directories to it and run the command.
This is a 100% stock flashable zip of the recently released 4.4.2 firmware for the P5200. As it is 100% stock, it is fully bloated, odexed, and non-rooted. If you wish to attain root you can do so by flashing superSU-2.02 zip from chainfire. As of right now, no other root method appears to be working, including towelroot.
Download link below.
A deodexed + rooted build is also available.
NOTE: if you flash the deodexed version and have problems with root, flash UPDATE-SuperSU-v2.02.zip from here. I don't anticipate any root problems, but just in case, this will fix it.
100% stock: STOCK-4.4.2-P5200(fixed).zip
Deodexed + rooted: STOCK-DEODEXED-ROOTED-4.4.2-P5200(fixed).zip
Anyone may feel free to use this as a base for their ROM. I only ask that you give me credit.
Restl3ss said:
This is a 100% stock flashable zip of the recently released 4.4.2 firmware for the P5200. As it is 100% stock, it is fully bloated, odexed, and non-rooted. If you wish to attain root you can do so by flashing superSU-2.02 zip from chainfire. As of right now, no other root method appears to be working, including towelroot.
Download link below.
A deodexed + rooted build is in the works. Bear with me.
100% stock: STOCK-4.4.2-P5200.zip
Anyone may feel free to use this as a base for their ROM. I only ask that you give me credit.
Click to expand...
Click to collapse
Very good work done by you! Yesterday I spent hours to unzip the file but unsuccessfully. I will try it right now! Thanks a lot!
Restl3ss said:
This is a 100% stock flashable zip of the recently released 4.4.2 firmware for the P5200. As it is 100% stock, it is fully bloated, odexed, and non-rooted. If you wish to attain root you can do so by flashing superSU-2.02 zip from chainfire. As of right now, no other root method appears to be working, including towelroot.
Download link below.
A deodexed + rooted build is in the works. Bear with me.
100% stock: STOCK-4.4.2-P5200.zip
Anyone may feel free to use this as a base for their ROM. I only ask that you give me credit.
Click to expand...
Click to collapse
I tried but it doesn't flash. Received "failed" message. I am using the latest TWRP by angel666. Any idea what I am doing wrong?
edsoedso said:
I tried but it doesn't flash. Received "failed" message. I am using the latest TWRP by angel666. Any idea what I am doing wrong?
Click to expand...
Click to collapse
I've got the same problem.
Hold on, I'm working on it
@edsoedso
@Max4000
I think I've fixed it. Reuploading now. Bear with me.
The problem was a fairly stupid one. I edited the assert to fit P5200 instead of P5210 (I'm using the same updater-script I used for the wifi model stock kitkat).
Problem is, I used mac textedit instead of gedit. One preserves linux encoding, the other does not. Can you guess which is which?
I believe it was Homer Simpson who said, "DOH".
Anyway, edited the updater-script with gedit and just removed the assert completely, so once it's done uploading you should be able to flash without issue.
Restl3ss said:
@edsoedso
@Max4000
I think I've fixed it. Reuploading now. Bear with me.
The problem was a fairly stupid one. I edited the assert to fit P5200 instead of P5210 (I'm using the same updater-script I used for the wifi model stock kitkat).
Problem is, I used mac textedit instead of gedit. One preserves linux encoding, the other does not. Can you guess which is which?
I believe it was Homer Simpson who said, "DOH".
Anyway, edited the updater-script with gedit and just removed the assert completely, so once it's done uploading you should be able to flash without issue.
Click to expand...
Click to collapse
Do not worry, I installed stock 4.4.2 using odin, than TWRP and superuser. It looks great! Please work on 4.4.2 Pimpdroid and let us known the results. Regards!
@Max4000
@edsoedso
Fixed version is now uploaded. Enjoy
@edsoedso
I know you've already got kk working, but would you be willing to try this zip to make sure it works? I think i've ironed it out but i'd like to be sure. Can't test myself as I have the WiFi model
just uploaded a deodexed + rooted build. If you have any troubles with root flash SuperSU from the link in OP.
do i need to clear data and cache beforce flashing ? cuz i don't have sd card so if i clear data the rom will delete.
khaledreno said:
do i need to clear data and cache beforce flashing ? cuz i don't have sd card so if i clear data the rom will delete.
Click to expand...
Click to collapse
I always do a factory reset, format data, and full wipe with any ROM Can you move your files to your PC via USB cable?
khaledreno said:
do i need to clear data and cache beforce flashing ? cuz i don't have sd card so if i clear data the rom will delete.
Click to expand...
Click to collapse
I flashed without wiping and had big problems. You should really do a full wipe.
Restl3ss said:
@Max4000
@edsoedso
Fixed version is now uploaded. Enjoy
@edsoedso
I know you've already got kk working, but would you be willing to try this zip to make sure it works? I think i've ironed it out but i'd like to be sure. Can't test myself as I have the WiFi model
Click to expand...
Click to collapse
I just saw your note. I am downloading both versions, flash them and let you know.
i have downloaded both versions but instal failed
any way does any one know which site i can download the MD5 of the software without corruption ?
Restl3ss said:
@Max4000
@edsoedso
Fixed version is now uploaded. Enjoy
@edsoedso
I know you've already got kk working, but would you be willing to try this zip to make sure it works? I think i've ironed it out but i'd like to be sure. Can't test myself as I have the WiFi model
Click to expand...
Click to collapse
@Restl3ss:
I flashed both versions using TWRP 2.6.3.0 and everything went well. The first unrooted rom after completing flashing offered to install superuser and I did it. The second rom version did not offered it so I rebooted to TWRP and installed superuser from sd card. I am keeping the second version on my tablet. Looks nice and works very well. I will remove some system apps that I do not use and free some additional memory.
It seems that battery is draining faster than 4.2.2. Does anybody note it? Any solution? Thank you!
I have tried the rootet and fixed version, , but it doesn´t work, it hangs on boot!
Installed with TWRP 2.7.1.0, may i have to install this ROM with Odin ?
jamalau said:
I have tried the rootet and fixed version, , but it doesn´t work, it hangs on boot!
Installed with TWRP 2.7.1.0, may i have to install this ROM with Odin ?
Click to expand...
Click to collapse
hey man you need to wipe system, data,cache and dalvik-cache
then flash the zip and it should work
edsoedso said:
@Restl3ss:
I flashed both versions using TWRP 2.6.3.0 and everything went well. The first unrooted rom after completing flashing offered to install superuser and I did it. The second rom version did not offered it so I rebooted to TWRP and installed superuser from sd card. I am keeping the second version on my tablet. Looks nice and works very well. I will remove some system apps that I do not use and free some additional memory.
Click to expand...
Click to collapse
Is there an update zip for recovery? I have 2.6.1 twrp and get error message during install. Can i update to latest twrp or philz by Flash, or do i have to connect the tab to PC, and need to do the beginners Steps?
Thanks for advices
Aaah, i got it... A flashable philz for p5200...
quitschibu84 said:
Is there an update zip for recovery? I have 2.6.1 twrp and get error message during install. Can i update to latest twrp or philz by Flash, or do i have to connect the tab to PC, and need to do the beginners Steps?
Thanks for advices
Aaah, i got it... A flashable philz for p5200...
Click to expand...
Click to collapse
Can you post the link for the Philz 5200 recovery?
thks
Can anyone tell me, or point me in the direction of a detailed explanation of how to return a z2 to factory software (ie stock firmware with no twrp or root) please?
I'm currently on Existenz MM with Twrp installed.
I see I can flash a stock ROM from Twrp but how do I then get rid of custom recovery? Does it make a difference that the phone is carrier locked and was carrier branded (O2)?
Many thanks!
tooplanx said:
Can anyone tell me, or point me in the direction of a detailed explanation of how to return a z2 to factory software (ie stock firmware with no twrp or root) please?
I'm currently on Existenz MM with Twrp installed.
I see I can flash a stock ROM from Twrp but how do I then get rid of custom recovery? Does it make a difference that the phone is carrier locked and was carrier branded (O2)?
Many thanks!
Click to expand...
Click to collapse
Use flashtools
raminta said:
Use flashtools
Click to expand...
Click to collapse
Okay, I already kind of new that. I could do with more detail. How exactly do I use flashtools and what do I flash?
Click the XF button to download the latest software with XperiFirm.
Then click the Thundershock icon and select flashmode to flash the rom, it should automatically list your latest downloads.
Check the wipe boxes if there not already checked.
Should be quite straight forward.
I'm not sure if that also locks your bootloader again if you want that, but there are plenty of manuals for that.
There are also plenty of manuals how to restore your TA partition.
mannte said:
Click the XF button to download the latest software with XperiFirm.
Then click the Thundershock icon and select flashmode to flash the rom, it should automatically list your latest downloads.
Check the wipe boxes if there not already checked.
Should be quite straight forward.
I'm not sure if that also locks your bootloader again if you want that, but there are plenty of manuals for that.
There are also plenty of manuals how to restore your TA partition.
Click to expand...
Click to collapse
Thanks for that. I'll give it a go when my new phone arrives.:good: