I have been using CM 12.1 for a while now, and have only until a bit ago have been receiving this error while updating the nightlies. I am aware this is because of the updater_script, and to flash new updates I have been replacing this file with an older, working one. But I am trying to find a permanent solution so I do not have to continue doing this. Any help is appreciated.
The script is looking for a different modem than what you have installed. You can get the flashable modem zips from here - http://forum.xda-developers.com/showpost.php?p=56005257&postcount=4
Related
Hello,
I Have a Nexus 5 with root, stock rom, Franco Kernel and the custom recovery is TWRP. I accomplished this by following a guide around this forum, I know very little about Android. The Android version i'm running is the 4.4.2 and the phone keeps asking me to update do the newer version, however, when I try to do it, it takes me to the TWRP menu, and when I try to install it there, I get this error:
"/system/bin/thermal-engine-hh" has unexpected contents
E: Error executing updater binary in zip
Error flashing zip
How can I update the phone to the newer version of android? Can anyone help me? Thanks.
D5R said:
Hello,
I Have a Nexus 5 with root, stock rom, Franco Kernel and the custom recovery is TWRP. I accomplished this by following a guide around this forum, I know very little about Android. The Android version i'm running is the 4.4.2 and the phone keeps asking me to update do the newer version, however, when I try to do it, it takes me to the TWRP menu, and when I try to install it there, I get this error:
"/system/bin/thermal-engine-hh" has unexpected contents
E: Error executing updater binary in zip
Error flashing zip
How can I update the phone to the newer version of android? Can anyone help me? Thanks.
Click to expand...
Click to collapse
That is the faulty zip, or the zip is not meant for your device! Maybbe, you should post this in Nexus 5 forum!
http://forum.xda-developers.com/google-nexus-5/help
lionelsuyog said:
That is the faulty zip, or the zip is not meant for your device! Maybbe, you should post this in Nexus 5 forum!
http://forum.xda-developers.com/google-nexus-5/help
Click to expand...
Click to collapse
Thanks, i'll do that!
I have rooted the device some time ago and now the lollipop update finally arrived.
I've used the original system all time long but when i try to update i get error, finally i've tried a sideload update and i can see the error. Now my problem is with this error:
Package expects build fingerprint of motorola/condor-retde/condor_umts:4.4.4/KXC21.5-40/46:user/release-keys or motorola/condor-retde/condor_umts:5.1/LPC23.13-34.8/10:user/release-keys this device has motorola/condor-retaildsds/condor_umtsds:4.4.4/KXC21.
Instalation aborted.
Now i believe i understand why i get this error, but my question is how to make it work. And what's the best method, by modifying the current software or by modifying the update.zip
PS. I'm an sysadmin not an android developer so please keep it simple.
Hi. My Moto E is giving me the same error as yours. Using Team Win Recovery Project, it says:
"Installing '/cache/Blur_Version.21.12.40.condor_retla_ds.retla.en.01.zip'...
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
Package expects build fingerprint of motorola/condor_retla_ds/condor_umtsds:4.4.4/KXC21.5-40/47:user/release-keys or motorola/condor_retla_ds/condor_umtsds:5.1/LPC23.13-34.8/9:user/release-keys; this device has Motorola/omni_condor/condor:4.4.2/KOT49H/eng.bigbiff.20140616.171951:eng/test-keys.
E:Error executing updater binary in zip '/cache/Blur_Version.21.12.40.condor_retla_ds.retla.en.01.zip'
Error flashing zip '/cache/Blur_Version.21.12.40.condor_retla_ds.retla.en.01.zip'
Updating partition details..."
Thanks!
Hello everyone.
I'm having some trouble updating my cm 12.1 custom nightly on my LG G3 vs985.
I have tried flashing the 23c modem to my phone, but I had no luck.
Here is what it gave me
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
Checking for BASEBAND version 24B
Checking for BASEBAND version 35B
ERROR: It appears you are running an unsupported baseband
assert failed: g3.verify_baseband("24B: 2 . 0 . 1 . C1. 13-00073". "35B: 2 . 0 . 1 . C1 . 4-00005") == 1
E:Error executing updater binary in zip '/sdcard/Download/cm-13 . 0-20160319-NIGHTLY-vs985.zip'
CM requires the24B or 35B baseband, just like it says in the error message. Flash one of those.
Sent from my LG-VS985 using Tapatalk
usmcamgrimm said:
CM requires the24B or 35B baseband, just like it says in the error message. Flash one of those.
Sent from my LG-VS985 using Tapatalk
Click to expand...
Click to collapse
Thanks mate, managed to get everything (GAPPS, xposed, some modules, etc) installed after fighting with GAPPS for 6.0 causing bootloops for 45 minutes. ?
Hey guys,
Running a rooted oneplus x with latest cyanogenmod (CM) nightly installed. I tried updating the latest nightly and got the following error:
updater process ended with ERROR: 7
Error installing zip file '/external_sd/cm-13.0-20161101-NIGHTLY-onyx.zip'
- I had CM recovery installed, and was getting the same error.
- I tried to update the CM recovery but I get the same error.
- I managed to install TWRP 3.0.2.0 recovery, and still no luck. Same error.
- Tried installing the latest Oxygen OS (downloaded from their site) and still same error.
- As per other forums, I've tried editing the updeater-script and still no luck. I deleted the first line, then saved and zipped. When I try to flash with that it says "can not find updater-script" even though I put the file type back to the way it was, and in the same spot.
any thoughts?
thanks!
You can try to change ONE to ONEPLUS in updater-script, do not delete the lines just change one to oneplus & then try to flash with twrp.
Same answer as in OP forum :
Before flashing, you should have done that.
http://forum.xda-developers.com/oneplus-x/general/guide-update-bootloader-firmware-to-t3478917
Now, if it doesn't work, it can be quite complicated....
Try updating the TWRP or use CM recovery
http://forum.xda-developers.com/showpost.php?p=69423690&postcount=60
I have an ascend mate 2. I have unlocked the bootloader, installed TWRP 3.1.1 and have updated my bios via Huawei site and currently have Android 5.1. I have tried uploading CyanogenMod 13 and lineage 14. Both times I get error 7 when uploading. Does anyone have any suggestions?
Batk138 said:
I have an ascend mate 2. I have unlocked the bootloader, installed TWRP 3.1.1 and have updated my bios via Huawei site and currently have Android 5.1. I have tried uploading CyanogenMod 13 and lineage 14. Both times I get error 7 when uploading. Does anyone have any suggestions?
Click to expand...
Click to collapse
You may want to provide your detailed procedure so others could help.
Batk138 said:
I have an ascend mate 2. I have unlocked the bootloader, installed TWRP 3.1.1 and have updated my bios via Huawei site and currently have Android 5.1. I have tried uploading CyanogenMod 13 and lineage 14. Both times I get error 7 when uploading. Does anyone have any suggestions?
Click to expand...
Click to collapse
I am experiencing the same issue. I did the advance wipe from TWRP 3.1.1 and install lineage 14. It stucks and gave this error message "This package supports bootloader(s) MSM8226C00B322_BOOT; This device has bootloader unknown. ". I had B322 built and Android 5.1.1 Lollipop on my Huawei Ascent Mate 2. I read from other forum and even tried to modify the line "assert(getprop("ro.bootloader") == "MSM8226C00B322_BOOT" || abort("This package supports bootloader(s): MSM8226C00B322_BOOT; this device has bootloader " + getprop("ro.bootloader") + ".");" in the file updater-script under META-INF\com\google\android directory and still not working. Please help
I am getting the same error. Full wipe of the device except for internal storage as I do not currently have a microSD card inserted (it's being used in my new phone, an S7 edge). I bought a new microSD card and used that to restore the stock ROM.
Exact text, copied from recovery.log:
Code:
Installing zip file '/sdcard/Download/lineage-14.1-20170302-nightly-mt2-signed.zip'
Checking for MD5 file...
Skipping MD5 check: no MD5 file found
I:Update binary zip
I:Zip does not contain SELinux file_contexts file in its root.
I:Legacy property environment initialized.
script aborted: This package supports bootloader(s): MSM8226C00B322_BOOT; this device has bootloader unknown.
This package supports bootloader(s): MSM8226C00B322_BOOT; this device has bootloader unknown.
Updater process ended with ERROR: 7
I:Legacy property environment disabled.
I:Install took 0 second(s).
Error installing zip file '/sdcard/Download/lineage-14.1-20170302-nightly-mt2-signed.zip'
Edit: So, I just reinstalled the stock ROM, B322, with no problems. Then I flashed TWRP 3.1.0, again, with no problems.
But I keep getting error 7, and it keeps saying that "this device has bootloader unknown". What gives? I can't stand the ridiculously large UI elements of the stock ROM, so I'm not going back to that.
EDIT: Alright, so I think I fixed it. Simply remove the "asserts" line from update-script in the ROM zip that deals with the bootloader (leave the device line if you wish) and it should work.
I used the instructions in this thread.