Related
Since I'm not able yet to post into the development forums:
I have decided to finally mod my Xperia S as well (did that only with HTC's before), and after unlocking the bootloader and slap Advanced Stock Kernel on it, i wanted to flash KA09 Xperia SSpeed. At first it all went well, no errors during installation but then i wanted to reboot, and the phone went into a permanent bootloop. There's the Sony startup screen with the Advanced Stock Kernel writing underneath, the blue LED flashes shortly, the phone vibrates, then it starts all over again.
I have tried SEUS but to no avail, since the phone will always restart, hence disconnecting to the PC. I also can't boot the phone into fastboot or recovery, or anything for that matter.
HALP!?
MichaelxHell said:
Since I'm not able yet to post into the development forums:
I have decided to finally mod my Xperia S as well (did that only with HTC's before), and after unlocking the bootloader and slap Advanced Stock Kernel on it, i wanted to flash KA09 Xperia SSpeed. It first it all went, no errors during installation but then i wanted to reboot, and the phone went into a permanent bootloop. There's the Sony startup screen with the Advanced Stock Kernel writing underneath, the blue LED flashes shortly, the phone vibrates, then it starts all over again.
I have tried SEUS but to no avail, since the phone will always restart, hence disconnecting to the PC. I also can't boot the phone into fastboot or recovery, or anything for that matter.
HALP!?
Click to expand...
Click to collapse
hold the power button + volume up then wait till it vibrates 3 times, your phone will power off. then you can use the SEUS, i think its via fastmode (power+volume down) to reflash or u can use flashtool to reflash ur firmware.
this is what i did when im stock on bootloop before (because i dont have back ups).
1. installed flashtool
2. download ftf
3. paste the ftf on c:\firmwares\
4. open flashtool then click the lighting icon, choose fastmode, choose ftf and wait until it says (power off phone then connect via fastmode), since your phone is power off all u need to do is to connect the phone and then hold the power button+ volume down.
5. then it will reinstall your firmware.
6. after reinstalled, flash advanced stock kernel.
7. then make back up of your rom so you dont need to reflash your firmware in case of bootloop.
now that was a quick reply, thank you very much. will try this and will post how it went!
Same problem
MichaelxHell, did it work, did you solve it?
If you did please let me know how you did because i have the same problem, will try what he said above too.
THX
halwar said:
MichaelxHell, did it work, did you solve it?
If you did please let me know how you did because i have the same problem, will try what he said above too.
THX
Click to expand...
Click to collapse
it will work because ive been there before
I was flashing ka xperia kernel (via recovery) over Advanced stock kernel and got this weird bootloop.
Sometimes i couldnt even start the freaking phone. So what i did was when the phone finally started and the botloop started i long pressed Vol Up and powerbutton for about 5sec (after the phone vibrates three times) so it would shut down, since i could not enter fastboot while it was bootlooping. Then held Vol Up (not Vol Down) while plugging in usb, only then i got to enter fastboot.
Then i only reflashed advance stock kernel (ics9.elf) and it finally booted back.
Might be helpful
Sent from my LT26i using xda premium
same problem of boot loop
help previously on ics stock unlocked bootloader via fastboot installed ka v1 kernal via fast boot and ther ka09 nspeed rom through recovery since then its boot loop any solutuion except stock ftf file
Use fastboot and try flashing Advance stock kernel forum.xda-developers.com/showthread.php?t=1729280 and see if its booting
Sent from my LT26i using xda premium
When you go from STOCK STOCK you should first prepare by doing a backup and then erasing everything before even trying to install a custom ROM or another kernel.
When you install a kernel that has recovery, before trying to install the custom ROM be sure to wipe data/factory reset and then wipe dalvik cache and fix permissions.
Then you can install the custom ROM and after that be sure to also install the patched KA09 zip.
And even after that, remember, that is a development ROM not completely stable at all.
halwar said:
Use fastboot and try flashing Advance stock kernel forum.xda-developers.com/showthread.php?t=1729280 and see if its booting
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
I have used this guide, and it worked just fine!! my Xperia S is back alive again! Thank you very much for the help everyone!
halwar said:
Use fastboot and try flashing Advance stock kernel forum.xda-developers.com/showthread.php?t=1729280 and see if its booting
Sent from my LT26i using xda premium
Click to expand...
Click to collapse
MichaelxHell said:
I have used this guide, and it worked just fine!! my Xperia S is back alive again! Thank you very much for the help everyone!
Click to expand...
Click to collapse
Okay, so i have flashed the Kernel from this thread: http://forum.xda-developers.com/showthread.php?t=1729280 and it brought my Xperia S back to life. the only problem now is, that the XPS won't boot into recovery. so far the ROM (KA09 Xperia SSpeed) is working fine, but it would be nice to have good old cwm back.. any help? thanks
My friend followed the steps given in the following link to install CM-9 on his phone.
Cyanogenmod 9 on Xperia S
Once he did a data wipe, he rebooted the phone and left it for a couple of minutes. It remained stuck at the bootloader for around 15 minutes. He then proceeded to try to try the whole thing again. While the fastboot flashing was successful, while trying to install the cm9-nozomi zip file, he got the following error:
assert failed: getprop("ro.product.device")=="LT26i"||getprop("ro.build.product")=="LT26i"||(getprop("ro.product.device")=="LT26a"||getprop("ro.build.product")=="LT26a"||getprop("ro.product.device")=="nozomi"||getprop("ro.build.product")=="nozomi"
Status 7
He's also tried mounting the system partition via mounts and storages and it shows mount failed. The same is the result for data, cache, etc.
He's now stuck at boot, but is able to access fastboot and recovery mode. The problem is that clockworkmod doesn't support USB OTG Mount and that even if I can modify the update script to not check for the script, I have no way of sending it into the phone.
Any suggestions, solutions or the like would be highly appreciated
I posted a question in your other post. Have you unlocked your bootloader?
Sorry about that.
Yes.
That was the first thing I made was done.
karthik_hp_1992 said:
Sorry about that.
Yes.
That was the first thing I made was done.
Click to expand...
Click to collapse
Try flashing back to stock to minimize the issues. Then flash via fastboot a rooted Kernel. Enter into CWM wipe Dalvik Cache first, then flash CM9. If bootloop still occurs try flashing Krab's kernel for CM9 http://forum.xda-developers.com/showthread.php?t=1808831. By the way what Kernel are you using?
rhogz said:
Try flashing back to stock to minimize the issues. Then flash via fastboot a rooted Kernel. Enter into CWM wipe Dalvik Cache first, then flash CM9. If bootloop still occurs try flashing Krab's kernel for CM9 http://forum.xda-developers.com/showthread.php?t=1808831. By the way what Kernel are you using?
Click to expand...
Click to collapse
The phone is currently running everything stock except the unlocked bootloader.
How would I flash back to stock if I'm unable to access the sd-card?
karthik_hp_1992 said:
The phone is currently running everything stock except the unlocked bootloader.
How would I flash back to stock if I'm unable to access the sd-card?
Click to expand...
Click to collapse
Try flashinf ftf files restore it install boot loader then it will return to stock
try cm9 if still not working then use pure ics kernel 1.1;
It did work for me....Intall it directly after installing cm9Don not Reboot Device After Installing cm9....try it
karthik_hp_1992 said:
The phone is currently running everything stock except the unlocked bootloader.
How would I flash back to stock if I'm unable to access the sd-card?
Click to expand...
Click to collapse
Ok so no need to flash back to stock, as you've mentioned you're on stock right now. You can flash via fastboot Advanced Stock Kernel by Arakmar or any Kernel that has CWM. Then you wipe Dalvik Cache and now you can install CM9. I stated on my earlier post that you can try flashing Krab's kernel for CM9 http://forum.xda-developers.com/show....php?t=1808831.
rhogz said:
Try flashing back to stock to minimize the issues. Then flash via fastboot a rooted Kernel. Enter into CWM wipe Dalvik Cache first, then flash CM9. If bootloop still occurs try flashing Krab's kernel for CM9 http://forum.xda-developers.com/showthread.php?t=1808831. By the way what Kernel are you using?
Click to expand...
Click to collapse
I flashed recovery-nozomi.img , then flashed cm9. It worked. Thanks for all the help!
karthik_hp_1992 said:
I flashed recovery-nozomi.img , then flashed cm9. It worked. Thanks for all the help!
Click to expand...
Click to collapse
You can hit thanks if we have helped you :good:
rhogz said:
You can hit thanks if we have helped you :good:
Click to expand...
Click to collapse
I was willing to try out CM 9.1 ROM I unlocked the bootloader as per steps everything went well. When I reboot it shows FXP logo and then it is stuck at Xperia logo. Since its battery is not removable I have to wait until it all drains out and charge again and get it into working mode. I could go into recovery and flash CM 9.1 but even from there when I reboot it now stuck up at CM logo same as Stock Xperia logo.
I have emma, flashtool and SUS but I cannot get my phone into flashboot or flashmode as nothing happens with volume key combination. When I connect using USB cable it shows RED LED light and once charged up I can get it into recovery mode...
I gave phone to sony repair somehow they are able to get into flashmode... however they say they might not be able to repair it as using Emma it doesn't flash stock ROM.
I am quite sure sony is going to return me handset without repair, any help would really save my brand new Xperia S from going into vain, Thanks a lot in advance!!!
Edit: nvm I didn't see previous posts
Sent from my LT22i using xda premium
Hi guys,
Yesterday I finally got to instal a new ROM onto my phone. I've done this before so my phone was already rooted and had the bootloader unlocked. I decided t ogo with Cyanogenmod10. My build was 4.1.B.0.587. I used the tutorial on cyanogenmod wiki and done everything as was said, step by step. I wasn't sure if ClockworkMod would be installed with the rom, so I donwload x-tools and isntalled it form there. Once thaat was done I proceeded to installiion. Everything went fine up until getting into CWM. I am now stuck in a boot loop, constaltly showing the xpera free project logo, then the screen goes dark and this all over and over again. So I searched the net and forums, but couldn't find any one with this problem. Most people either get into CWM and from there can't get further, or they turned the phone on adn after using some application theirs system crashes, but nobody seems to have problems with CWM. I can't get anywhere from here and have no idea what to do. If somebody could please help me, I would be very gratefull! Thanks
John
jan019 said:
Hi guys,
Yesterday I finally got to instal a new ROM onto my phone. I've done this before so my phone was already rooted and had the bootloader unlocked. I decided t ogo with Cyanogenmod10. My build was 4.1.B.0.587. I used the tutorial on cyanogenmod wiki and done everything as was said, step by step. I wasn't sure if ClockworkMod would be installed with the rom, so I donwload x-tools and isntalled it form there. Once thaat was done I proceeded to installiion. Everything went fine up until getting into CWM. I am now stuck in a boot loop, constaltly showing the xpera free project logo, then the screen goes dark and this all over and over again. So I searched the net and forums, but couldn't find any one with this problem. Most people either get into CWM and from there can't get further, or they turned the phone on adn after using some application theirs system crashes, but nobody seems to have problems with CWM. I can't get anywhere from here and have no idea what to do. If somebody could please help me, I would be very gratefull! Thanks
John
Click to expand...
Click to collapse
Hmmm...CWM is already available as built-in inside the custom kernel...no need to install recovery using x-tools anymore...just flash the kernel (boot.img) using flashtool...
iPusak Gaoq™ said:
Hmmm...CWM is already available as built-in inside the custom kernel...no need to install recovery using x-tools anymore...just flash the kernel (boot.img) using flashtool...
Click to expand...
Click to collapse
I tried that. I opened flashtool, connected my hpone in fastboot mode, selcted fastboot mode, selcted teh kernel, everytrhign went fine without errors. I then disconected the phone, turned it on and once I reached the logo I kept pressing the volume down button, but it does nothign and keeps looping...
jan019 said:
I tried that. I opened flashtool, connected my hpone in fastboot mode, selcted fastboot mode, selcted teh kernel, everytrhign went fine without errors. I then disconected the phone, turned it on and once I reached the logo I kept pressing the volume down button, but it does nothign and keeps looping...
Click to expand...
Click to collapse
you have to wait until the LED appears then you can press volume down (you can also try volume up or power button) to enter recovery....but i suggest you flash stock rom back first and make sure that your phone can boot fine...then flash custom kernel and flash CM10 in recovery...
iPusak Gaoq™ said:
you have to wait until the LED appears then you can press volume down (you can also try volume up or power button) to enter recovery....but i suggest you flash stock rom back first and make sure that your phone can boot fine...then flash custom kernel and flash CM10 in recovery...
Click to expand...
Click to collapse
Okay so I flashed back to stock kernel and now i can boot into CWM and even a normal compelte boot. I'll ttry flashing CW again
jan019 said:
Okay so I flashed back to stock kernel and now i can boot into CWM and even a normal compelte boot. I'll ttry flashing CW again
Click to expand...
Click to collapse
Hmmm...i said flash stock ROM not stock kernel...if you phone boot fine using stock kernel then you flash fxp kernel (custom kernel) and boot into CWM...no need to flash CWM separately cause CWM is already inside custom kernel...
iPusak Gaoq™ said:
Hmmm...i said flash stock ROM not stock kernel...if you phone boot fine using stock kernel then you flash fxp kernel (custom kernel) and boot into CWM...no need to flash CWM separately cause CWM is already inside custom kernel...
Click to expand...
Click to collapse
Okay, I'll give it a shot and come back with how I did.
jan019 said:
Okay, I'll give it a shot and come back with how I did.
Click to expand...
Click to collapse
WTF... So I charged my phone first so I reach the recommended 85%... Meanwhile I redownloaded the CM10 if it wasn't a bad downnload or something, from the original website. Once that was done, I turned my phone off, turned flashtool on a connected my phone in fastboot mode. I then flashed the kernel with boot.img from CM, unplugged and turned the phone off, waitign for the logo, pressed the volume down button many times and ntohing. I tried multiple times, different buttons too. Still the same. What can I be doing wrong?
jan019 said:
WTF... So I charged my phone first so I reach the recommended 85%... Meanwhile I redownloaded the CM10 if it wasn't a bad downnload or something, from the original website. Once that was done, I turned my phone off, turned flashtool on a connected my phone in fastboot mode. I then flashed the kernel with boot.img from CM, unplugged and turned the phone off, waitign for the logo, pressed the volume down button many times and ntohing. I tried multiple times, different buttons too. Still the same. What can I be doing wrong?
Click to expand...
Click to collapse
When I have the phone flashed with stock kernel I can get into the CMW recovery. Trying to install CM with the stock kernel is i guess not a good idea right?
EDIT: So I tried downloading CW9 if that wouldn't make a difference, but it's the same story. Once I boot the phone it just keeps looping from the logo to black screen, no LED lights up, nothing. What if I did a factory reset either from CWM or in the normally booted? Could that help in anyway?
jan019 said:
When I have the phone flashed with stock kernel I can get into the CMW recovery. Trying to install CM with the stock kernel is i guess not a good idea right?
EDIT: So I tried downloading CW9 if that wouldn't make a difference, but it's the same story. Once I boot the phone it just keeps looping from the logo to black screen, no LED lights up, nothing. What if I did a factory reset either from CWM or in the normally booted? Could that help in anyway?
Click to expand...
Click to collapse
Hmmmm...how many times did i have to tell you, you need to FLASH STOCK ROM first...stock rom has stock kernel inside it...flashing STOCK rom will factory reset your phone...it should make your phone like new...after your phone boot normally then you can flash custom kernel (fxp kernel) and boot into recovery using that kernel...then only then you can flash CM10 into your phone....
jan019 said:
Hi guys,
Yesterday I finally got to instal a new ROM onto my phone. I've done this before so my phone was already rooted and had the bootloader unlocked. I decided t ogo with Cyanogenmod10. My build was 4.1.B.0.587. I used the tutorial on cyanogenmod wiki and done everything as was said, step by step. I wasn't sure if ClockworkMod would be installed with the rom, so I donwload x-tools and isntalled it form there. Once thaat was done I proceeded to installiion. Everything went fine up until getting into CWM. I am now stuck in a boot loop, constaltly showing the xpera free project logo, then the screen goes dark and this all over and over again. So I searched the net and forums, but couldn't find any one with this problem. Most people either get into CWM and from there can't get further, or they turned the phone on adn after using some application theirs system crashes, but nobody seems to have problems with CWM. I can't get anywhere from here and have no idea what to do. If somebody could please help me, I would be very gratefull! Thanks
John
Click to expand...
Click to collapse
probably bcuz u used CWM located in phone storage & deleted it. happens.
to shorten here all, i advice u to use allways kernels (built in) recovery. (forget about xparts its onlx for locked bl ppl)
also if u want to go for a cm (10+) build try LX from here bcuz FXP is NO longer supported! they kleave us. also its very outdated/old/bad
if u flash (any) kernel CWM is inbuilt, so just reflash the kernel using fastboot (cmd commands) , then on power on press the vol up button moretimes!! to enter CWM (must work) i really advice u to use some LX build. (dont forget to wipe partitions bfore flash)
bejunk said:
probably bcuz u used CWM located in phone storage & deleted it. happens.
to shorten here all, i advice u to use allways kernels (built in) recovery. (forget about xparts its onlx for locked bl ppl)
also if u want to go for a cm (10+) build try LX from here bcuz FXP is NO longer supported! they kleave us. also its very outdated/old/bad
if u flash (any) kernel CWM is inbuilt, so just reflash the kernel using fastboot (cmd commands) , then on power on press the vol up button moretimes!! to enter CWM (must work) i really advice u to use some LX build. (dont forget to wipe partitions bfore flash)
Click to expand...
Click to collapse
Okay guys, I'm really confused right now. I just couldn't manage to boot into CWM with CM, I tried many versions, none worked. I then applied the exact same steps onto LX and it worked perfectly, I was in CWM after pressing the volume down butto na few times. Now it's been almost a month since I did this and I wanted to change to a differet version again, so I wanted to try CM again, but it's the same thing, I can't get to CWM. Any ideas?
Thanks
hey guys please please help i had the custom rom pac nightly now here is where the sh*t went down, i tried to put on carbon and flashed the kernel with that and since then im unable to get back root i have locked the bootloader and tried unlocked the bootloader, the screen comes up to the point where the rom loads and the lil vibrate happens, and then pufff it just goes back to the boot up and then again and again !!! how can i fix this please help
Flash a boot.img with recovery and reflash.
Sent from my Z Ultra
LordManhattan said:
Flash a boot.img with recovery and reflash.
Sent from my Z Ultra
Click to expand...
Click to collapse
thanks buddy for the response but tried it and wont work !!!
Is your bootloader unlocked at the moment?
It should work as lordmanhattan said.
Flash boot.img from carbon
Flash carbon from recovery.
You could start over and flash new ftf then do the above instructions...
Sent from CarbonROM on my Z-Ultra
blueether said:
Is your bootloader unlocked at the moment?
It should work as lordmanhattan said.
Flash boot.img from carbon
Flash carbon from recovery.
You could start over and flash new ftf then do the above instructions...
Sent from CarbonROM on my Z-Ultra
Click to expand...
Click to collapse
yes bootloader is unlocked
sorry i know im being tedious but just to re check ...
1. flash ftf (my zu is from HK so the latest is .681 ftf)
2. then fash the boot.img from carbon
3. then flash carbon onto my phone
in this order you reckon it would fix my problem?
(going ahead and giving it a try anyways in the above order lets see if it pans out)
ashankanand said:
yes bootloader is unlocked
sorry i know im being tedious but just to re check ...
1. flash ftf (my zu is from HK so the latest is .681 ftf)
2. then fash the boot.img from carbon
3. then flash carbon onto my phone
in this order you reckon it would fix my problem?
(going ahead and giving it a try anyways in the above order lets see if it pans out)
Click to expand...
Click to collapse
As you seem to be having issues I would go back to stock and satrt again, and the steps above should do just that for you. I would boot up after the first step just to check that everything is upto speed on the phone.
I wouldn't worry about getting a HK firmware, just use any of the unbranded/generic US/EU 757 FTFs
I cant see why it didn't work straight from PAC , hell the kernel in Carbon boots the latest PAC just fine
blueether said:
As you seem to be having issues I would go back to stock and satrt again, and the steps above should do just that for you. I would boot up after the first step just to check that everything is upto speed on the phone.
I wouldn't worry about getting a HK firmware, just use any of the unbranded/generic US/EU 757 FTFs
I cant see why it didn't work straight from PAC , hell the kernel in Carbon boots the latest PAC just fine
Click to expand...
Click to collapse
ok bud tired it now the problem is the dam phone keeps going into recovery boots and gets stuck on sony and then reboots and goes into recovery any advice!!!
Flash a stock tft with flashtool in flashmode and it should work again.
Anyways flashing the kernel with the boot.img in fastboot mode should work.
Have tried that flashed the latest ftf. Then used the root guide didn't work used the boot.img from carbon from pac rom. Still just reboots , my issue is I want a custom rom cos I'm happier with a custom rom, so I get root on the stock. But I can't seem to load a custom rom, first it was midway boot now it's recovery reboots , I want a custom rom any advice .
Sent from my C6833 using XDA Free mobile app
ashankanand said:
Have tried that flashed the latest ftf. Then used the root guide didn't work used the boot.img from carbon from pac rom. Still just reboots , my issue is I want a custom rom cos I'm happier with a custom rom, so I get root on the stock. But I can't seem to load a custom rom, first it was midway boot now it's recovery reboots , I want a custom rom any advice .
Sent from my C6833 using XDA Free mobile app
Click to expand...
Click to collapse
Do it like this:
- flash boot.img (flashtool: fastboot mode)
- wipe cache/dalvik cache (CWM Recovery)
- flash the ROM[.zip] (CWM Recovery)
- flash the GAPPS[.zip] (CWM Recovery)
- reboot
That should work.
I mean flashed ftf , fastbooted boot.img from carbon, had recovery reboots (meaning the phone would boot up stuck on Sony logo and then reboot into recovery ) then tried pac rom boot.img no help, infact flashed ftf cleard cache and data and then flashed boot.img flashed rom , had same recovery issue, then tried a full wipe, (ofcourse flashed ftf again) I mean went into mount storage and formated cache data system etc etc, now I'm really baffeld I have tried everything I find myself getting everything to work except putting the custom rom someone help
Sent from my C6833 using XDA Free mobile app
ashankanand said:
I mean flashed ftf , fastbooted boot.img from carbon, had recovery reboots (meaning the phone would boot up stuck on Sony logo and then reboot into recovery ) then tried pac rom boot.img no help, infact flashed ftf cleard cache and data and then flashed boot.img flashed rom , had same recovery issue, then tried a full wipe, (ofcourse flashed ftf again) I mean went into mount storage and formated cache data system etc etc, now I'm really baffeld I have tried everything I find myself getting everything to work except putting the custom rom someone help
Sent from my C6833 using XDA Free mobile app
Click to expand...
Click to collapse
You forgot to flash the rom itself. Just flashing the kernel (boot.img) doesn't to anything instead of flashing
the kernel. You need to flash the ROM to have working Operation System. That's why just the logo shows
up and goes into recovery. Put the ROM (the .zip file of the rom) on your SD Card and go into recovery
and go to "install .zip" and choose your file. After that the ROM should be loading after Boot Logo. Don't forget
to flash the GAPPS after flashing rom.
Pacman Rom: www.blownco.com/index.php/doc_download/13688-pac-togari-4-3-build-1-20131214-044914
Pacman Gapps: www.blownco.com/index.php/doc_download/13604-gapps-jb-20130813-signed
here is an example for installing the rom and gapps:
https://www.youtube.com/watch?v=n0In32vjxIg&feature=player_embedded
Just do the same with your files.
Flashed the rom buddy , every time ofcourse I thought I didn't need to mention that hehe ,
Sent from my C6833 using XDA Free mobile app
ashankanand said:
Flashed the rom buddy , every time ofcourse I thought I didn't need to mention that hehe ,
Sent from my C6833 using XDA Free mobile app
Click to expand...
Click to collapse
I was wondering man. Can you provide us with a link of the rom you want to use.
tr0teK said:
I was wondering man. Can you provide us with a link of the rom you want to use.
Click to expand...
Click to collapse
carbon rom : http://forum.xda-developers.com/devdb/project/dl/?id=5119
Pac-rom : http://pacman.basketbuild.com/download.php?file=main/togari/nightly/pac_togari-nightly-20140505.zip
How to reproduce your error step by step ?
tr0teK said:
How to reproduce your error step by step ?
Click to expand...
Click to collapse
ok not so clear on what you are asking but here goes
had a c6802 cracked the screen (using carbon rom on it loved it) bought a c6833 wanted to try pac rom put it on realized my batt consumption is way too high so tried to switch back to carbon now, while doing so i flashed carbon rom Double tap to wake and carbon kernel, here started the spiral, first few hours couldn get any thing to work read up looked up a few of the forum, and ftf fashed the generic hk rom things got ok, but then root was the issue so found out the root method, fastboot .img and flash cmw supersu.zip, all fine and dandy didnt mess with it in anyway
since then as i have explained im gettin a recovery loop even when i flash the stock rom (cmw flash not ftf) so now i have the latest stock rom with root but i have sony's stock i want a rock in which i can add a menu button and change the dip and everything doesnt crash if you know what i mean....
ashankanand said:
ok not so clear on what you are asking but here goes
had a c6802 cracked the screen (using carbon rom on it loved it) bought a c6833 wanted to try pac rom put it on realized my batt consumption is way too high so tried to switch back to carbon now, while doing so i flashed carbon rom Double tap to wake and carbon kernel, here started the spiral, first few hours couldn get any thing to work read up looked up a few of the forum, and ftf fashed the generic hk rom things got ok, but then root was the issue so found out the root method, fastboot .img and flash cmw supersu.zip, all fine and dandy didnt mess with it in anyway
since then as i have explained im gettin a recovery loop even when i flash the stock rom (cmw flash not ftf) so now i have the latest stock rom with root but i have sony's stock i want a rock in which i can add a menu button and change the dip and everything doesnt crash if you know what i mean....
Click to expand...
Click to collapse
maybe the solution for you would be too install xposed framework which gives you the features you want. It allows your to "modify" your stock rom like the advanced power button menu, editing the navigation and status bar and stuff like that.
http://repo.xposed.info/module/de.robv.android.xposed.installer
you obviously need ROOT for this.
tr0teK said:
maybe the solution for you would be too install xposed framework which gives you the features you want. It allows your to "modify" your stock rom like the advanced power button menu, editing the navigation and status bar and stuff like that.
http://repo.xposed.info/module/de.robv.android.xposed.installer
you obviously need ROOT for this.
Click to expand...
Click to collapse
so yeah not to be a buzz killl buddy i know i am here asking for help and i really appreciate it but i tried that and gives me system ui errors cos i would have been ok with xposed but its not working great especially the special xposed for xperia cos the generic xposed is not workin anyway
ashankanand said:
so yeah not to be a buzz killl buddy i know i am here asking for help and i really appreciate it but i tried that and gives me system ui errors cos i would have been ok with xposed but its not working great especially the special xposed for xperia cos the generic xposed is not workin anyway
Click to expand...
Click to collapse
Which ROM do you have installed exactly ? In which country do you live ?
Right, I have a set of issues which all seem vaguely connected but I can't figure out how to resolve.
I've unlocked my bootloader and I've been messing about with recoveries and CM11 etc.
The situation however is that I installed doomkernel, got into CWM and installed CM11, all good.. went to go back into the recovery and it's gone, it just hangs if I try, no worries I thought I'll just reflash doomkernel, then the ROM doesn't boot so I have to reflash boot.img from the CM11 zip.
That kills the recovery again... rinse and repeat basically, it looks like I can't have CM11 and CWM which is a PITA.
Plenty of people in the CM11 thread seem to be having no issues with either retaining the recovery or using cyandelta, neither of which work for me and whilst CM11 is still in nightly I really need to be able to upgrade frequently.
Also, using flashtool to unlock the bootloader was fine but I can't flash a recovery from there as the option is greyed out on both CM11 and the stock ROM..
I'm lost, I've tried several combinations but I've also gone dangerously close to bricking the phone so I've backed off..
Can anyone give me any pointers?
The only thing I haven't done is download the ROM from the frexperia site as I can't make sense of which ROM I need, I can't see Z2 or Sirius mentioned anywhere and I've learned the painful way in the past not to flash the wrong ROM.
So now I'm back to the stock rooted ROM but there's a bunch of issues with it such as it loving switching the wifi on and off, proximity sensors thinking my face is my fingers, the useless lock screen etc etc.
HALP! Thanks all
Try this:
1 - install recovery.
2 - reboot into recovery.
3 - flash CM11, don't reboot.
4 - flash gapps, don't reboot.
5 - flash recovery & reboot.
Does this leave you with a recovery? There is an option to upgrade recovery in CM11 settings -> developer options -> update CM recovery. Try this and see what happens.
Sent from my SGP311 using XDA Free mobile app
I haven't been flashing the recovery from within CWM, in fact I'm not even sure you can with it being a kernel image as thats how Sony's work? If I flash the doomkernel again I know CM11 won't boot and sort of vice versa..
EDIT - Sorry I didn't see you had a Z2.. have you managed to pull this off? Any tips on a recovery flashable kernel?
mrmatt100 said:
I haven't been flashing the recovery from within CWM, in fact I'm not even sure you can with it being a kernel image as thats how Sony's work? If I flash the doomkernel again I know CM11 won't boot and sort of vice versa..
EDIT - Sorry I didn't see you had a Z2.. have you managed to pull this off? Any tips on a recovery flashable kernel?
Click to expand...
Click to collapse
Reintall stock. Skip Doom Kernel, directly fastboot CM boot.img. Flash CM in your now working recovery.
Thats what worked for me
Sent from my Xperia Z2 using Tapatalk
Sorry what do you mean by skin the kernel? I'm not a n00b but I've never heard that before?
but thanks for the help!
Myself5 said:
Reintall stock. Skin Doom Kernel, directly fastboot CM boot.img. Flash CM in your now working recovery.
Thats what worked for me
Sent from my Xperia Z2 using Tapatalk
Click to expand...
Click to collapse
Still stuck on this, I do know I've got stock with doom kernel and I've fastboot flashed the CM boot.img from the CM11 nightly, that basically results in a phone that won't boot OR go into recovery.
Literally the only way I can get into CWM is by using doom kernel and the stock ROM (obviously rooted and using xposed etc if that makes a difference) and the moment I flash anything from within CWM it obviously overwrites the boot.img meaning I can boot normally but not with a working recovery.
I can't escape the feeling that I ought to be flashing a specific version perhaps from freexperia rather than the cyanogenmod website or I need a different kernel to kick the process off rather than doom kernel.
Very confusing and a real shame doom kernel only works with stock ROMs
Sorry the skin part was a spelling misstake. Should have been SKIP. I issued the same as you, my problem was somehow related to DoomKernel. So just Flash Stock now (using a ftf in flashtool) and then straight the boot.img from the CM zip. Now boot in the recovery (press vol down when the Amber led lights up at the boot process) and flash the CM zip in this recovery (wipe data/Factory reset and format /system before ofc (least that what I would recommend)). Flash Gapps if you whish. Reboot to your now working CM install.
Sent from my Xperia Z2 using Tapatalk
Myself5 said:
Sorry the skin part was a spelling misstake. Should have been SKIP. I issued the same as you, my problem was somehow related to DoomKernel. So just Flash Stock now (using a ftf in flashtool) and then straight the boot.img from the CM zip. Now boot in the recovery (press vol down when the Amber led lights up at the boot process) and flash the CM zip in this recovery (wipe data/Factory reset and format /system before ofc (least that what I would recommend)). Flash Gapps if you whish. Reboot to your now working CM install.
Sent from my Xperia Z2 using Tapatalk
Click to expand...
Click to collapse
Absolutely 100% spot on, I'm so happy! Thanks
mrmatt100 said:
Absolutely 100% spot on, I'm so happy! Thanks
Click to expand...
Click to collapse
hello i'm having this exact same issue and i will be trying this taday when home from work. the only thing i'm not sure about is the ftf in flashtool.
don't know what ftf stands for, but i presume flashtool is the official sony flash tool?
http://developer.sonymobile.com/services/flash-tool/
thanks for the answer.
skuko said:
hello i'm having this exact same issue and i will be trying this taday when home from work. the only thing i'm not sure about is the ftf in flashtool.
don't know what ftf stands for, but i presume flashtool is the official sony flash tool?
http://developer.sonymobile.com/services/flash-tool/
thanks for the answer.
Click to expand...
Click to collapse
I think there's the official and an unofficial tool, I used the one from here http://www.flashtool.net/index.php
And a .ftf file is an official sony ROM, bit like how you end up with .zip files for non official ROMs, HTCs have .RUUs and iPhones have .ISPW files.
There's a list of .ftf files on here somewhere, grab the latest from there.
For what it's worth, I went CM11, got fed up with the camera quality so went to xistenz and romaur, both slightly unstable so I went back and back again to a stock .ftf, rooted it and I'm just using a bunch of xposed tweaks now and it looks pretty much the same as AOSP now. You only see the difference when you're in settings.
skuko said:
hello i'm having this exact same issue and i will be trying this taday when home from work. the only thing i'm not sure about is the ftf in flashtool.
don't know what ftf stands for, but i presume flashtool is the official sony flash tool?
http://developer.sonymobile.com/services/flash-tool/
thanks for the answer.
Click to expand...
Click to collapse
I meanwhile found a even easier way to solve this problem. Just go into faatboot mode (turn off phone press Vol+ and attach USB) and do "fastboot erase recovery" this will boot the kernels default recovery (CWM) again. This all is caused by some missing tools in the kernel which is not loading TWRP. However even with the tool provided by @Dees_Troy it does not load TWRP, now instead of hanging at the black screen with no recovery it still loads CWM after flashing TWRP to the recovery partition.
Sent from my Xperia Z2 using Tapatalk
Myself5 said:
I meanwhile found a even easier way to solve this problem. Just go into faatboot mode (turn off phone press Vol+ and attach USB) and do "fastboot erase recovery" this will boot the kernels default recovery (CWM) again. This all is caused by some missing tools in the kernel which is not loading TWRP. However even with the tool provided by @Dees_Troy it does not load TWRP, now instead of hanging at the black screen with no recovery it still loads CWM after flashing TWRP to the recovery partition.
Sent from my Xperia Z2 using Tapatalk
Click to expand...
Click to collapse
so if i want to get rid of the doomkernel, i still need to reflash the stock ftf, correct?
skuko said:
so if i want to get rid of the doomkernel, i still need to reflash the stock ftf, correct?
Click to expand...
Click to collapse
In case you want back to stock, yes. In case you want from Doom to CM just erase the recovery partition and fastboot flash the CM boot.img
Sent from my Xperia Z2 using Tapatalk
seems to have worked, my kernel in "about phone" now says:
3.4.0cyanogenmod-g449fd42
[email protected] #1
Mon Aug 18 09:30:35 BST 2014
i used the boot.img from your carbon rom nightly.