I've been hesitating for a while if I should buy this smartcover, just because of the bad recensions, but at last i did.
I've noticed that it wont lay flat on the screen when I close it. I disocovered that Samsung have an awesome solution for their flipcover: Spigen Magnetic Clip (because I'm new I cant link it for you...)
I was just woundering, am I the only one beeing botherd by Sonys non-closing cover? Does anyone got a solution for this "simple" problem? I was thinking about something like the Samsung solution?
Regards!
Don't know if this will be helpful or not but I had the same issue with my HTC One M8 and the official flip case.
Turned out it was due to my glass screen protector. As soon as I took i t off it was perfect!
Roshi69 said:
Don't know if this will be helpful or not but I had the same issue with my HTC One M8 and the official flip case.
Turned out it was due to my glass screen protector. As soon as I took i t off it was perfect!
Click to expand...
Click to collapse
In this case I don't think thats it, just because I dont have one on. But thanks for your answer.
Give it time
I wouldn't worry, if it is just a question of the cover gaping a little when the cover is new. I have the SCR24 case and use a Nillkin screen protector, and for me, the cover is flat on screen when closed.
However, when it was new, it would not lay flat - i guess it just needed time and use, before the material softened enough to allow it to close by it's own weight.
A minor misalignment could make it worse, if the phone is slightly too far up against the flexible part of the cover, making it harder for the cover to close properly around the phone.
\Nykjaer
nykjaer said:
I wouldn't worry, if it is just a question of the cover gaping a little when the cover is new. I have the SCR24 case and use a Nillkin screen protector, and for me, the cover is flat on screen when closed.
However, when it was new, it would not lay flat - i guess it just needed time and use, before the material softened enough to allow it to close by it's own weight.
A minor misalignment could make it worse, if the phone is slightly too far up against the flexible part of the cover, making it harder for the cover to close properly around the phone.
\Nykjaer
Click to expand...
Click to collapse
Thank you for your answer, guess I just have to wait it out then. But as I said earlier, it would be totally awsome if there was anything like the samsung magnet, but for the Z3.
I agree, the Samsung solution is simple and well engineered (if the glue sticks properly over time...) I guess we have to live with a flappy cover - Samsung is just that more popular/mainstream to make these developments attractive.
But is really shouldnt take many changes to the Samsung design to make it work for the Z3 cover, if someone decides there's a market for it.
Good luck with softening up your style cover! :good:
/Nykjaer
Related
http://www.boxwave.com/products/activecase/active-case-htc-wizard-cingular-8125_1160.htm
do the tabs break? does the case fall off? this looks like the perfect protector case for the phone.
i am debating between that and the full body shield
http://www.shieldzone.com/item_description/HTCCING8125F.html
opinions?
of course i know i will still need a screen protector if i choose the plastic case... not a big deal.
**EDIT**
wait a minute, does the active case cover the touch screen??? if it does then that would be COMPLETELY disappointing... *crosses fingers*
I think the plastic covers the screen...
I don't have one, but looking at the pictures, it certainly looks like the plastic covers the screen. This opinion is further reinforced by the statement: "Conveniently view your calendar and contacts through the crystal-clear protective shell".
This makes the case a non-starter for me!
-Kal.
Well I just e-mailed them and if it leaves the screen open (which if you look really close at the short-angle pics of the front, i really want to believe that the screen is exposed) then this will be my 1st aftermarket case. I will post the email results and (pending a positive response) also my personal opinions of the case once it has shipped.
on a side note I am also buying a 3-pack of stylii, the clear touch crystal, and the USB/car charger. ill post feedback if everything works out!!
did you ever get a reply back? I'm interested - though I'm considering it even if it comes with a plastic cover for the screen - as long as it's easily removable, it's more convenient for me so I can just keep it in my front pocket with no danger for the screen. When I need the touch screen I'll take it off, otherwise with something like xbar and other today page plugins, I would minimize touchscreen neccessity.
Since you mentioned you were considering the invisible shield product, are you worried about the screen cracking? What has been your experience with phones without hard cases such as this. It seems to me many people just prefer it in the front pocket with no case due to the bulkiness.
Other Active cases for different devices have a flip screen for the display. I am curious if this one does as well. To me that would be ideal as it could then be carried in your pocket. My old Jornada 568 was like that and it was very handy.
beppomarx said:
Well I just e-mailed them and if it leaves the screen open (which if you look really close at the short-angle pics of the front, i really want to believe that the screen is exposed) then this will be my 1st aftermarket case. I will post the email results and (pending a positive response) also my personal opinions of the case once it has shipped.
on a side note I am also buying a 3-pack of stylii, the clear touch crystal, and the USB/car charger. ill post feedback if everything works out!!
Click to expand...
Click to collapse
From what I've seen from surfing around, the company's cases for other devices cover the screen, but look like they're hinged to provide easy access to the screen when needed. Their case for the Dell Axim X50 does this. I think the description that the company is using for this is pretty generic to cover most of their other products. They really should clarify the screen cover thing for this particular device.
I'll be interested in hearing more about this...
https://www.zagg.com/invisibleshiel...es-screen-protectors-covers-skins-shields.php
I'm wait first review..
Thanx its ordered
thanks, i ordered too!!!
Count me in as well...
Bought one last night
I purchased a few screen protectors off eBay.... and NONE of them actually cover the entire surface of the screen.
This looks pretty amazing!
But I must say that it feels a bit strange to spray the fluid on the back of the protector and then squeeze it out, can't this fluid get into the earphone, speaker and around the buttons below the screen?
this doesn't look bad, but i think i'll stay with my Brando screen protector, which imo is cool enough, and will get a rubber-ish backplate as soon as one with a correct price will appear.
I have been searching for a skin like this for my Diamond2. I have read that this Zagg skins all have a orange coat on top that makes a very undesirable effect. Any one can confirm this?
And what about phantom skynz? They provide full body protection, but the model for the D2 its not available yet ...
A little money saving tip for anyone else buying from zagg - enter ZAGG20 in the coupon code box to receive a 20% discount.
Hope that saves someone some money
root beer said:
A little money saving tip for anyone else buying from zagg - enter ZAGG20 in the coupon code box to receive a 20% discount.
Hope that saves someone some money
Click to expand...
Click to collapse
Just ordered.
Thank you bro!
Just installed the InvisibleSHIELD...
I just installed the invisibleShield I ordered from Zagg a few days ago. Installation was a little tricky, but using the solution made it easy(ish). I used a lot more spray than they recommended, but took the battery/sim/SD card out first. I left it drying for 12 hours, and everything switched on fine.
My advice to anyone getting this is to watch some installation vids on YouTube.
I bought it for the screen protector really as I am very clumsy with other WM phones in the past.
The main issue I have, which is a major one, is that the kit for the Diamond 2 is actually 7 pieces which you install piece by piece. Some of these pieces (like the brushed metal pieces on the edge) are very thin and warp easily. I thought when I purchased this that the screen piece would be one part, where the edges would 'fold' around the sides. This is NOT the case. As a result, the actual edges are not covered at all. These pieces don't meet to form a solid shield, but leave gaps between the edges. I have included some pictured to highlight this.
The actual effect on the screen is ok. The screen is bubble-less, but there is a slight sheen on the front. When the screen is on, its not noticable. Also, the shield is a little 'tacky' - not a lot, but it does help feel more snug in your hand. However, for the same reason, the touch screen (when using a stylus) it doesn't feel as smooth as without.
My overall opinion is that if you are looking for something to stop scratching the screen then its great, but if you are looking for something to make your phone indestructible, look elsewhere.
So you bought the protection that coveres the entire phone?
I'm planning to buy the cover for the display only, was the display cover hard to get in place?
agento
7 pieces....so you have 1 piece for backplate,2 in front and 4 for the sides?
Is that correct?
Thanks for sharing the info. Does the IS make it difficult to get the backplate off?
Does it make the front, back or sides feel or look noticeable different?
Laban said:
So you bought the protection that coveres the entire phone?
I'm planning to buy the cover for the display only, was the display cover hard to get in place?
Click to expand...
Click to collapse
The front was the easiest thing to apply!
MOYSATOS said:
agento
7 pieces....so you have 1 piece for backplate,2 in front and 4 for the sides?
Is that correct?
Click to expand...
Click to collapse
There is the front piece, the back piece, 2 thin strips for the sides and 2 small rectangles for the bottom side near the stylus. So 6, not 7. I can't count!
Jiffycom said:
Thanks for sharing the info. Does the IS make it difficult to get the backplate off?
Click to expand...
Click to collapse
No, the IS covers the back plate, but it doesn't wrap over the sides. The back slides off just as easy as ever.
toady2k1 said:
Does it make the front, back or sides feel or look noticeable different?
Click to expand...
Click to collapse
The front just looks like a normal screen protector. The back looks glossier. The touch though, as stated earlier, is slightly tackier. The only thing is the gaps where the IS doesn't meet.
Not trying to bum you out, but... the pictures you posted show a pretty messy device. Doesn't have a "clean" look anymore, is this because of the ZAGG?
So after looking and looking, I finally decided to drop the $59 (shipping from their site is free) and get the Gumdrop skin case. I found that I was leaving my tablet at home all the time because I was worried about dropping it, and by the time someone makes one to satisfy my needs to work with the dock too, I'd be looking for another tablet.
So I picked up the military one, in the green from their website. I figured if I didn't like it, I can easily return it.
Item showed up today, they ship Fedex Ground if anyone is wondering, and I ordered it last Thursday. The packaging it comes in is pretty damned sturdy. I'm usually anal about protecting anything I buy, and the packaging it came in was probably a bit overboard.
Getting it pulled apart to get the printed insert out of the actual case was impressive in its own. NOTHING is going to hurt your tablet in this case, other than if you stepped in the middle of it.
Anyways, I wanted to get this thread started, so I can answer any questions folks have about this case. I just got it a few hours ago, and will do a short review this weekend, and a longer term review after a month or so. I'll get you some pictures too of all the parts and how it goes together.
A few initial notes.
1. This thing is THICK.
2. When I opened it, my first thought was, "Get rid of the integrated screen protector". I decided to pull it out, then put it on top of my tablet to see if you can use the touch screen with it on there (it is a "hard" screen protector). The screen picks up your movements PERFECT with the screen protector in place.
3. All cutouts are perfect.
4. The entire device is covered
5. The thick silicone rubber exterior has a hard plastic skeleton that you snap on over your tablet. Then you stretch the exterior over that.
6. The screen cover has a hard plastic frame that snaps into the skeleton, from the INSIDE.
There is no slack, no wiggling, and once you get it in place and push all of the locking tabs from the exterior through the skeleton, it looks like your tablet was BUILT this way. Amazing.
My only cons so far...
1. I wish the screen cover snapped in from the outside. Not that I'll ever probably take it off, but it would be nice to have the option.
2. No kickstand. With the plastic skeleton, I see no reason they couldn't have integrated a kickstand like the Incipio cases.
I am still holding out hopes for someone to make something like this that leaves a option to connect your dock. A detachable cover at the bottom and a matching case for the dock would fix it all.
Also, I'm kind of surprised no one has a dock to tablet extension cable yet. That would actually make this really nice. With a kickstand.
LOL
Okay, I'll get more info soon, get me your questions if you have any folks.
cool review, got a link by chance?
polo79 said:
cool review, got a link by chance?
Click to expand...
Click to collapse
Amazon has them - http://www.amzn.com/dp/B005FVDVIW
And the manu page - http://www.gumdropcases.com/tablet-cases.html
I can't really tell the difference between the military and regular ones - I'm eyeing up that red/black model. Thanks for the review.
If they made this case that fit both the TF and dock, i would buy it
Is there any kind of buffer between the hard plasktic screen protector and the screen? My experience with hard plastic screen protectors is that sometimes small objects or dirt gets caught between the screen protector and screen. With use this trapped dirt starts to scratch the screen. You might also consider getting a stick-on screen protector as well.
I saw a review where there was a question about how this case might make the device retain heat. Do you notice any overheating?
i have the same case and think it is build like a tank and everything the OP says it is. i have not noticed any overheating at all. a lot of people were saying how ugly it is, i think it is really cool looking in person, i have the same OD green military version
bulldogbreed said:
i have the same case and think it is build like a tank and everything the OP says it is. i have not noticed any overheating at all. a lot of people were saying how ugly it is, i think it is really cool looking in person, i have the same OD green military version
Click to expand...
Click to collapse
Is there any kind of buffer between the hard plasktic screen protector and the screen? My experience with hard plastic screen protectors is that sometimes small objects or dirt gets caught between the screen protector and screen. With use this trapped dirt starts to scratch the screen. You might also consider getting a stick-on screen protector as well.
My priorities for selection was protection, functionality & "looks". I doubt I'll invest in the keyboard/dock; I'm essentially wanting a larger smart phone, LOL
My only nit with it...is the images make the green look more pastelly versus a darker tone...which IMO, is more in line with a "military" green. But I guess the tone makes it a bit more fashionable. I can live with it.
Great lil review. Thank you for reaffirming my choice.
** I will post some pictures later today - I'm at work currently **
The Nillkin Fresh case came about 2-3 days ago and I was quite excited. But that was short lived. The case is a faux-leather flip cover case with a thin plastic shell on that clips to the phone. It looks decent enough, but I have some problems with mine (possibly QC problems):
The case though didn't completely fit!! Along the right side (near the SD/SIM) it is a bit warped - not bad or noticeable unless your looking right at it and for it.
The case is held closed by a magnet, but the magnet on the flip cover is quite small which then requires it to be precisely over the other pole or it does nothing. Not a big deal, but I wish this was thought out better.
Additionally, one of the main features of the case is (link below) how the case being used as a stand. The flip cover is a tri-fold design which should act as a stand but I haven't had much luck with it. The inside of the seemingly leather flip cover is a soft touch, almost suede, material that is quite slippery. This plus the fact that the case seems to be needing to be broken in makes for the "stand" feature unusable... it falls right over currently. (I have tried multiple configurations).
Over all, I bought the case on eBay for $9.99 with no shipping cost (ships from china - companies home country) and it took about 15 days to get here (in the US). Not bad, but I am already looking for a replacement that will make my device feel premium again rather then cheap.
Would I recommend this case? Yes, but only as a temporary case until more come out - like the official Sony cases or a case from Incipio (link below).
** Complete side note: I had a Nillkin case for my old Nexus 4 which only lasted a few short months because the leather started to peel away from the flip cover! I knew this would be a temporary case when I bought it, so keep that in mind!
http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=13&id=3526&page=1
http://www.incipio.com/cases/smartphone-cases/sony-smartphones/sony-xperia-z-ultra-cases.html
I was fortunate to get to try that case out and many others (being in hk and china) - and I posted about this case. It's unfortunate you didn't read my post and what case eventually went with in the big Z ultra case thread.
This case is definitely not recommended if you want one to work well with desk stand, and want to use the trifold ipad style cover as a stand.
The snap-in style plastic mounts doesn't make it easy to pop in and out of to use the desk stand, and the plastic mounts are shiny thus looks and feels cheap.
Finally, the cover doesn't even come close to the quality and feel of the ipad cover, even the vinyl kind. The material is stiff and plasticky and most importantly doesn't fold together to function as a working stand at all. It will unfold/collapse and fall over.
In addition, there's an issue with the the magnet. With the magnet closed, there is a gap between the last third of the tri-fold cover and the phone's screen. This gap exists because the case (mold or design) is not the right fit - the wider flap makes it essentially unable to align with the opposing magnet. If you try to push the flap down to get rid of the gap, you inadvertently push/slide the magnet off and the cover comes loose. In practice, the magnet will never be engaged because you'll always push the cover down somehow (pocket, bag, stacking something on top).
The only Nillkin I recommend is the http://www.nillkin.com/english/proshow.asp?mid=2&sid=0&tid=0&cid=1&scid=13&id=3516&page=1 shield case. I ended up buying the black one for scenarios where I don't want a flip cover. The fit is good, texture is good (good grippy backside), and it doesn't look too cheap (no shiny plastic). It's decent protection for rougher than usual situations. There are sections where there's a thin piece of plastic on the edge of the phone (like over the usb flap) where it feels weak, cheap and easily breakable. Besides that only issue, I like this case as a back-up.
For a flip cover case that works well with a desk stand, actually stands up, and feels decent quality - I recommend Kaso and Krussell. I went with Kaso as a cheaper alternative for now.
So I guess it's not just me... which is kind of a bummer, but I have already found a replacement. Now if only October 22 was here (my Birthday) I could get a new case!
Thanks for the replay, some good thoughts there!
toonhead85
Funny how the 2 Nillkin cases the OP talks about are the exact 2 I bought online.
I bought the white Fresh, and Yellow leather.
Anyway, after having used both, now I know that flip covers, despite the protection it gives, tend to get in the way of general use. Answering calls involve one extra hassle step.
Taking pictures, you have to roll the flip cover up into the triangle as if you are going to use it as a stand and hold it in your left hand, because simply flipping it and folding it over will obstruct the camera.
Nothing wrong with the build quality...I am sure it is better than most cheapos out there. All the useful ports are left uncovered (one of the reasons why I chose Nillkin...there is actual thought process that has gone into the design). If you want to use the magnetic charging port, not many other manufacturers apart from Nillkin make them uncovered.
The yellow I chose is less vibrant in colour (than what it seemed on screen), and does not go so well with the white ZU I have, so that got retired until the day I get SBH-52 and leave my phone in the bag.
For the Nillkin Fresh, I got in white, and am very happy with it, and currently in use.
It has a nice tight fit, seems to be made of good tough plastic, and the texture on the back helps with general grip.
I did make one modification to it, because even though the magnetic charging port is left open by design, it was impossible to get a good connection while the pone was still in the case. So I cut off the thin strip that runs along the screen side of the mag port. Filed it down with nail clipper file, and now it is perfect. It has not lost structural rigidity.
The number of times that i thought that I had closed the USB port properly, but was still slightly open (thus not making it fully waterproof) has prompted me to get the magnetic charging cable. I knew it was something I wanted while I was out choosing the case, so for those who are still looking for cases, I won't say go Nillkin, but make sure you go for one that has the magnetic charging port uncovered.
Whether you buy DK-30 is a different debate. Some like it, but some find it expensive for what it is. There are not many covers out there tat allow you to dock with it on.
But the USB magnetic charging cable is something I believe every ZU owner should have. For that reason get a cover with the port uncovered.
jewelkobayashi said:
I did make one modification to it, because even though the magnetic charging port is left open by design, it was impossible to get a good connection while the pone was still in the case. So I cut off the thin strip that runs along the screen side of the mag port. Filed it down with nail clipper file, and now it is perfect. It has not lost structural rigidity.
Click to expand...
Click to collapse
Can we please get pictures of this modification? Keen to replicate. Otherwise attractive looking case, be a shame to waste.
liqn7 said:
Can we please get pictures of this modification? Keen to replicate. Otherwise attractive looking case, be a shame to waste.
Click to expand...
Click to collapse
Here u go
jewelkobayashi said:
Nothing wrong with the build quality...
Click to expand...
Click to collapse
I came back to post a quick update about the case I got and this caught my eye... actually the build quality is the reason as well!!
The case is broken ><. On the top left hand side (near the charging port) the case has snapped. A piece is broken clean off and only after about 2 weeks. I know the case was $10, but I also had build quality issues with a Nexus 4 case, so I am going to say the quality is rather low.
With this new information, I am going to say stay away from this case. The long import time (from HK to US), and poor quality aren't worth it. Spend the few extra bucks and get a quality case you will have for more than a few weeks.
Just my 2 cents though...
toonhead85
Since owners have had the phone a for a bit longer now, I would like some feedback on those screen protector choices you have made.
Basically what I want is the common things:
*As invisible as possible.
*Smooth feeling to the touch is preferred.
*easy to apply is a plus
*I prefer to not remove the sony one already there.
So I was looking at M.glass, other ebay glass ones and then my usual choices like Zagg HD the case friendly version for the plasticky ones.
So what is working out for you guys?
I bought one off of ebay http://www.ebay.com/itm/261323055474?ssPageName=STRK:MEWNX:IT&_trksid=p3984.m1497.l2649. It feels nice when you put it on. I got something stuck under it though so if you are installing one make sure your phone is perfectly clean. I like the feel of it better than the normal screen. It was hard to install well for me but probably not as hard as I made it out to be. I had it perfect but removed it to get the thing from under it out and that is where things went wrong.
Thats my problem too when installing myself..always some dust gets in somehow. I am thinking on trying to install inside the bath tub or something after running the how water for like 10 minutes to see if that helps...seriously lol
shaolin95 said:
Thats my problem too when installing myself..always some dust gets in somehow. I am thinking on trying to install inside the bath tub or something after running the how water for like 10 minutes to see if that helps...seriously lol
Click to expand...
Click to collapse
i have the Armorz Stealth Extreme R on mine. a bit on the pricey side but i love it. I also have one of the ebay ones for the back glass. both were put on over the stock sony screen protectors. on the back piece, i actually soaked the back of the screen with a spray bottle before applying it. It was a pain in the ass pressing out all the bubbles, but it looks flawless after a bit of elbow grease.
I have Glass-M front+back for mine and I absolutely love it. (Removed factory ASF as well). My notes
* It is really smooth. Like freshly made toffee it is so smooth it feels faintly greasy (but it is not). On an almost completely flat table the phone will slowly slide across the surface by itself due to a slope you can't see (be careful)
* I believe touch sensitivity is improved. Finicky DPI sliders in Paranoid Android setups give me no trouble now - before jumping 239,243,241 when I really want 240 dpi exactly. Pencil also works perfectly as a stylus.
* I believe screen brightness and clarity are improved. Subjective and probably due to removal of the ASF (and its invisible tiny scratches)
* Extra glass makes the phone a bit thicker but also much stiffer and I liked this. I also have a Z1 and I miss how solid that phone felt in my hand. Ultra always felt a bit too flimsy (bendy). I also had to widen the slot on my DK30 (sandpaper glued to a flat stick aka big emory board)
* Getting alignment correct is tricky - glass-M slightly smaller than the phone screen edges. Mine went on crooked but I can live with that.
* No dust or bubbles in mine. Used the shower trick of old school film photographers. Long hot steamy shower will effectively clean the room of even tiny dust particles.
* Removing the ASF is a truly harrowing experience (see the other thread). Halfway through you *will* have an "Oh God what have I done" moment. Still totally worth it.
Hope my ramble helps someone. In summary really happy with the Glass-M. :good:
shaolin95 said:
Thats my problem too when installing myself..always some dust gets in somehow. I am thinking on trying to install inside the bath tub or something after running the how water for like 10 minutes to see if that helps...seriously lol
Click to expand...
Click to collapse
Haha yeah I took it off and it made it way worse... ended up being a waste of money which has been happening a lot since my phone had been sent back for repair. I have wasted so much money. But yeah I bought another one and got it a couple of days ago but have not opened it. I will install it right when my phone gets back.
So when you guys go dual glass (front and back I mean) do you just carry it without a case? I mean, when I remove mine from the case it just feels SOOOO good to hold, like the case makes it feel not as ergonomic even though you will think is just one flat object
shaolin95 said:
So when you guys go dual glass (front and back I mean) do you just carry it without a case?
Click to expand...
Click to collapse
Glass-M Front+Back and I carry mine "au naturel". Four weeks of sliding in and out of pocket + keys, coins, cig. lighter etc with no marring or scratches. Seriously it feels way better in my hand than the factory finish: smoother, bit thicker (2x 0.25mm glass + adhesives is a lot on a 6.5mm phone), and far more solid. Absolutely love its handling after placing the extra glass.
Downsides are metal sides will eventually pick up scratches and dents and also I don't like the proximity sensor cutout: messes with the Sony design and makes it look like everybody else's iPhone/Samsung/whatever with slots cut into the front of the phone. I don't believe the cutout is necessary for that sensor to work. (could be wrong about that)
n0bleINtP said:
Glass-M Front+Back and I carry mine "au naturel". Four weeks of sliding in and out of pocket + keys, coins, cig. lighter etc with no marring or scratches. Seriously it feels way better in my hand than the factory finish: smoother, thicker (2x 0.25mm glass + adhesives is a lot on a 6.5mm phone), stiffer and more solid. Absolutely love its handling after placing the extra glass.
Downsides are metal sides will eventually pick up scratches and dents and also I don't like the proximity sensor cutout: messes with the Sony design and makes it look like everybody else's iPhone/Samsung/whatever with slots cut into the front of the phone. I don't believe the cutout is necessary for that sensor to work. (could be wrong about that)
Click to expand...
Click to collapse
yup. I carry it without a case now. feels super classy. picked up some weight from the dual glass but I'm not worried about scratching the screen compared to using the phone fresh out of the box.
Sent from my C6833 using xda app-developers app
Ah you guys are going to make me join the nudist colony!
Well I got too many cases already on the way but they will live in the car to be used when required, but for the most part I love the feel of it naked....and we are still talking about phones just before someone locks the thread
Does the glass go all the way to the edges of the phone? Like if I use one of those cases that go just above the screen (if those will even fit which I doubt) will it make the glass come off?
I guess I should just not use a case but gosh I bought a couple of nice ones already LOL
shaolin95 said:
Does the glass go all the way to the edges of the phone? Like if I use one of those cases that go just above the screen (if those will even fit which I doubt) will it make the glass come off?
I guess I should just not use a case but gosh I bought a couple of nice ones already LOL
Click to expand...
Click to collapse
incipio feather worked with front glass. it worked with back glass too but feels super snug.
Sent from my C6833 using xda app-developers app
Thats a very nice looking case...I just wish they would have left the charging port open..kind of strange they did not make a cut for that :/
Well, I guess I use it without a case at home and at work right now anyway since with my case it wont fit on the DK30 but still, if I were to use a single cable, that case wouldnt let me charge.
shaolin95 said:
Thats a very nice looking case...I just wish they would have left the charging port open..kind of strange they did not make a cut for that :/
Well, I guess I use it without a case at home and at work right now anyway since with my case it wont fit on the DK30 but still, if I were to use a single cable, that case wouldnt let me charge.
Click to expand...
Click to collapse
I modified the case to leave opening for magnetic charging port. some use a dremel. I used a razor blade. came out looking how it was supposed to be, but since I got the back glass, I don't use it anymore. lol
Sent from my C6833 using xda app-developers app
yeah maybe I bought cases for decoration now LOL We shall see.
I just thought of one possible issue if I get the Glass-M vs getting a single one for the screen only....I want to get one of those extended batteries case combinations.
So if I get that, I am pretty sure it wont fit with the Glass-M but maybe it will fit if I only get one glass for the front?
I'm getting my glass-m protectors today. I'll post my opinion tomorrow some time
Cool!
I got one of the front glass only protectors from ebay. Still waiting for it to arrive to see if I can deal with it.
I should have gotten the Glass M but I dont feel like modding the DK30 which I will probably have to do anyway
shaolin95 said:
Cool!
I got one of the front glass only protectors from ebay. Still waiting for it to arrive to see if I can deal with it.
I should have gotten the Glass M but I dont feel like modding the DK30 which I will probably have to do anyway
Click to expand...
Click to collapse
Got my Glass-M protector yesterday put it on this morning. It works great. Its' pretty comparable to the spigen tr I had on my S4 maybe a littler thinner. It includes the front and back glass protectors, rear camera cutout was perfect. The front appears to cover the camera. There is a cutout for something to the left of the camera but I'm not really sure why. Maybe I am misunderstanding the layout? Luckily it laid down well enough that its not causing any distortiong.
It actually feels nicer and seems more fingerprint resistant than the stock bare screen with its ASF film. It's an expensive kit but considering both front and rear protectors are glass it seems like its worth the money to me.
Shipping was also really fast considering it came from hong kong....about 5 days.
So I ended up trying this glass one:
Protector
The feeling and quality of the image is so pristine compared to my previous regular plastic like protector!
I did have to sand paper the DK30 a bit to make it fit but all is good. I still can use all my cases if needed and I left the plastic protector for the back part.
So overall, I think I will keep this one because with the dual Glass M ones, I dont think my cases will work nor the Charging case combo I want.
With the size of this phone and the Explosion proof glass...I feel like Captain America now