This is the fix for reboot recovery problem after rooting for SM-G530H.
1st download & root from here or with any other app.
Flash the attached recovery with odin.
If you want a fix for your device or in-case this does not work post your stock recovery image. i'll try to fix.
Do at your own risk. i'm not responsible for any kind or brick or damage.
DOWNLOAD
I have failed to install aroma file manager, can help me to this problem. because I will execute the file system
duffski said:
I have failed to install aroma file manager, can help me to this problem. because I will execute the file system
Click to expand...
Click to collapse
where do you find aroma here? do not post off topic replies here.
Related
i have HTC Desire X. i can't install busybox, my phone reboots on installing it.
i want to ask that does this flashing the zip file helps? it wont brick my cellphone right?
i got this " Root_SuperSU.1.44-Busybox.1.21.1_in_xbin-signed" and "busybox" zip file from some XDA thread, i have attached it
do i have to install busybox in my phone before going to recovery and flash the zip file?? or without installing busybox on my phone i should go to recovery and flash this zip file? they haven't mentioned anything about it in that XDA thread (http://forum.xda-developers.com/showthread.php?p=51688913#post51688913)
i have attached two zip files for BusyBox, please someone check it.
i m not able to install Xposed on my HTC Desire X. after reboot app_process disappears (shown in the picture attached).
there are three modes of installation in Xposed
1. Classic (write to /system directly)
2. manually zip flash by recovery
3. automatically zip flash by recovery
what does 2 and 3 do? and how does 2 and 3 work?
i have installed xposed version 2.1.4 via flashing zip file in twrp i got from this some website (i m not allowed to post the outside link for some reason), i have attached the zip file i got from that website.
Now i want to update it to latest version but after installing lastest version (2.5 or 2.4.1), app_process doesnt get install (app_process number shows 34 in red)
is there a solution to this problem?
is there a way to get Xposed zip for latest version?
Please Help. i m noob.
Thank You
To install busybox I think u need custom kernel.
Sent from my Desire X using Tapatalk
You'll need a custom kernel?
I'm not sure but I'm sure that's the case, you can just download the "busybox" app from the PlayStore and click install.
The sash wringing... the trash thinging... mash flinging... the flash springing, bringing the the crash thinging the...
krishneelg3 said:
You'll need a custom kernel?
I'm not sure but I'm sure that's the case, you can just download the "busybox" app from the PlayStore and click install.
The sash wringing... the trash thinging... mash flinging... the flash springing, bringing the the crash thinging the...
Click to expand...
Click to collapse
You need to have a custom kernel for that, or install it through recovery
GtrCraft said:
You need to have a custom kernel for that, or install it through recovery
Click to expand...
Click to collapse
thanks for the reply.
i really dont want to play with kernel, as it may hard brick the cellphone.
i just want a safest way to install busybox.
cuz when i try to install busybox my phone reboots.
Milind.joshi said:
thanks for the reply.
i really dont want to play with kernel, as it may hard brick the cellphone.
i just want a safest way to install busybox.
cuz when i try to install busybox my phone reboots.
Click to expand...
Click to collapse
Hard bricking can happen with installing busybox too, same chance as installing kernel. You can also install busybox from recovery, you only need to find a flashable zip
GtrCraft said:
Hard bricking can happen with installing busybox too, same chance as installing kernel. You can also install busybox from recovery, you only need to find a flashable zip
Click to expand...
Click to collapse
i found the flashable zip, i have attached the zip file in my previous post.
i found that zip file from this link http://forum.xda-developers.com/showthread.php?p=51688913#post51688913
but not sure if its working, as i have not got the reply yet on the above link.
and i m afraid to use that zip file.
hi all ,
any one can tell me how to root samsung galaxy J2 ( SM-J200M ) ?
Thanks
Pleaaaaaase !
any idea ? PLEAAAAAASE !
ROOT Samsung J2 here. ..
http://forum.xda-developers.com/showthread.php?t=3258147
Enviado desde mi SM-J200M mediante Tapatalk
boot loop
Rachav2 said:
ROOT Samsung J2 here. ..
http://forum.xda-developers.com/showthread.php?t=3258147
Enviado desde mi SM-J200M mediante Tapatalk
Click to expand...
Click to collapse
thank you:crying: but i tried and not working for me , it cause boot loop . i tried twice but no luck . :crying:
hi , any update please about SM-J200M root ? why it's so hard now to root samsung :crying:
Where do u stuck.......
which caused bootloop?
twrp installition or flashing supersu?
aravazhi_mdr said:
Where do u stuck.......
which caused bootloop?
twrp installition or flashing supersu?
Click to expand...
Click to collapse
after flashing supersu
So you have a working TWRP??
right??
use supersu v2.46 which is stable.....
PHP:
https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1
aravazhi_mdr said:
So you have a working TWRP??
right??
use supersu v2.46 which is stable.....
PHP:
https://download.chainfire.eu/696/SuperSU/UPDATE-SuperSU-v2.46.zip?retrieve_file=1
[/QUOT
i did , but no luck
Click to expand...
Click to collapse
i did , but no luck
Click to expand...
Click to collapse
Use aroma file manager to remove SU binary and supersu.apk
PHP:
http://forum.xda-developers.com/showthread.php?t=1646108
flash aroma file manager using twrp and browse the following and delete them.
/system/bin/su
/system/xbin/su
/sbin/su
/system/app/supersu.apk
Click to expand...
Click to collapse
also search for files included in SuperSU.zip (which u flashed) and delete them using aroma file manager....
there is a terminal so you can change permission and delete them...
After all done wipe /data and /cache
aravazhi_mdr said:
Use aroma file manager to remove SU binary and supersu.apk
PHP:
http://forum.xda-developers.com/showthread.php?t=1646108
flash aroma file manager using twrp and browse the following and delete them.
also search for files included in SuperSU.zip (which u flashed) and delete them using aroma file manager....
there is a terminal so you can change permission and delete them...
After all done wipe /data and /cache
Click to expand...
Click to collapse
i will try
delete busy box also if found
aravazhi_mdr said:
Use aroma file manager to remove SU binary and supersu.apk
PHP:
http://forum.xda-developers.com/showthread.php?t=1646108
flash aroma file manager using twrp and browse the following and delete them.
also search for files included in SuperSU.zip (which u flashed) and delete them using aroma file manager....
there is a terminal so you can change permission and delete them...
After all done wipe /data and /cache
Click to expand...
Click to collapse
i tried all the steps , but always boot loop . PLEASE ANY NEW IDEAS ?
Thanks
Flash stock rom....
Before that if u have warranty try to claim it and also ask help from samsung developers......
if u don't have warranty let's do this
Download Stock ROM
and flash it using ODIN
also contact Samsung developers from HERE and consider this idea.....
coz I'am just throwing guesses and I don't have experience in samsung devices....
sorry for this answer.. :sad:
Good luck buddy...
still no luck .
again , please . any way to root samsung j2 ? SM-J200M .
SM-J200M
i tried to flash SU via TWRP but no luck
kingroot : no luck
Kingoroot: no luck
SRS : no luck
IROOT: no luck
oneclickroot: NO LUCK
i think it's so hard now to rood android
SuperSU 2.46 is what caused the boot loop in my case.
But TWRP 3.0 works just fine.
Downloading stock rom now to try a reflash to get it out of boot loop.
---------- Post added at 07:04 PM ---------- Previous post was at 06:55 PM ----------
Stock rom is still downloading but got it fixed without doing a full reflash.
SuperSU 2.46 is what caused the boot loop.
Installing SuperSU 2.67 (currently in BETA) is what fixed i for me.
Do recovery
-> Install SuperSU-v.2.67
-> Clear cache/dalvik
Reboot
I'm back in, and SuperSU is installed.
Rooted!
i have already rooted my j200m ... it wasnt too hard, just install the twrp and the super su ... thats all
https://www.dropbox.com/s/1c582fybb1phvlv/recovery.tar.md5.zip?dl=0
DISCLAIMER: FOLLOW INFO OR YOU WILL 86(RUIN) YOUR PHONE.
Download the file
Extract the file and flash via ODIN in BL Section
This should fix any bootloop issue.
Until they figure out a fix, this will take care of that force boot into TWRP
so you kinda have to flash between the two so you can boot it or to flash proper files.
DEVS!!!! Please request MODs to sticky this until this issue is fixed.
I tried this and it didnt change the boot loop in my phone. I have tried flashing everything and no luck.
It helped me only bc after updating... phone kept going back to recovery...
SykkNyzz said:
https://www.dropbox.com/s/1c582fybb1phvlv/recovery.tar.md5.zip?dl=0
DISCLAIMER: FOLLOW INFO OR YOU WILL 86(RUIN) YOUR PHONE.
Download the file
Extract the file and flash via ODIN in BL Section
This should fix any bootloop issue.
Until they figure out a fix, this will take care of that force boot into TWRP
so you kinda have to flash between the two so you can boot it or to flash proper files.
DEVS!!!! Please request MODs to sticky this until this issue is fixed.
Click to expand...
Click to collapse
My Phone model is SM-J700H/DS.
the phone is not booting after flash SuperSU.
i do get in TWRP and Downloading Mode.
will this solution will fix it ?
thanks.
Update:
Problem Solved,
i had falshed the wront SuperSU version.
falshed again v2.68 and that solve the problem.
i took it from here:
http://rootmygalaxy.net/flash-supers...ndroid-device/
SykkNyzz said:
https://www.dropbox.com/s/1c582fybb1phvlv/recovery.tar.md5.zip?dl=0
DISCLAIMER: FOLLOW INFO OR YOU WILL 86(RUIN) YOUR PHONE.
Download the file
Extract the file and flash via ODIN in BL Section
This should fix any bootloop issue.
Until they figure out a fix, this will take care of that force boot into TWRP
so you kinda have to flash between the two so you can boot it or to flash proper files.
DEVS!!!! Please request MODs to sticky this until this issue is fixed.
Click to expand...
Click to collapse
An alternative method is to make sure you have an installed rom an with supersu in twrp flash a stock boot.img to the recovery partition and youll boot up no problems
Sent from my SM-J700P using Tapatalk
I found the issue is also from when people use that *reboot to recovery* function.
SykkNyzz said:
I found the issue is also from when people use that *reboot to recovery* function.
Click to expand...
Click to collapse
Thats what i used through adb
Sent from my SM-J700P using Tapatalk
THIS IS FOR YU5011
1. DOWNLOAD THE RAR FILE AND EXTRACT IT.
2. FOLDER INCLUDES SCATTER FILE, DOWNLOAD AGENT AND PATCHED BOOT IMAGE.
3. READ "README" FILE AND FOLLOW IT.
New updated link (install magisk manager v5.9.1 after flashing this boot image) : https://drive.google.com/file/d/1yN0967HJbww6bzC9vxntEWRCfMHwG1dH/view?usp=drivesdk
jthnpeter said:
THIS IS FOR YU5011
1. DOWNLOAD THE RAR FILE AND EXTRACT IT.
2. FOLDER INCLUDES SCATTER FILE, DOWNLOAD AGENT AND PATCHED BOOT IMAGE.
3. READ "README" FILE AND FOLLOW IT.
Click to expand...
Click to collapse
Thanks for the boot image. I was able to flash the image and I get warning on the boot screen that it is patched image. After installing MagiskManager app I am unable to install the Magisk.zip file. How did you install magisk without customer recovery?
zerozero700 said:
Thanks for the boot image. I was able to flash the image and I get warning on the boot screen that it is patched image. After installing MagiskManager app I am unable to install the Magisk.zip file. How did you install magisk without customer recovery?
Click to expand...
Click to collapse
Install magisk.zip by clicking the install button in magisk manager (your operator may charge for data).
jthnpeter said:
Install magisk.zip by clicking the install button in magisk manager (your operator may charge for data).
Click to expand...
Click to collapse
I get option to download the zip file or patch the image. I can download the file. It doesn't get installed. I tried to install that zip from recovery, but I get error.
zerozero700 said:
I get option to download the zip file or patch the image. I can download the file. It doesn't get installed. I tried to install that zip from recovery, but I get error.
Click to expand...
Click to collapse
Do not install via stock recovery ever..
Flash the updated new boot image...then install latest magisk manager v5.9.1...
It will surely work
How do I hide the Orange State message?
Everything worked as expected - Unlocked bootloader, flashed newboot.img file, installed Magisk Manager and gained root access. But whenever the phone boots, there is a -
"Orange State
Your devices has been unlocked and can't be trusted
Your devices will boot in 5 seconds"
Is there any way to disable/hide the message? Not that it is causing problems but it looks ugly.
Can this method used in YU5012 also
Dear Friends,
I am here to update Root package for SM-G5520 G5520ZCU1CRK1 8.1.0
1. Download & Flash this file. Link
2. Reset your phone
3. setup your phone
4. Done
Your Phone is rooted now.
Note: this root may work for "Flashfire" to flash GApps, because it's update root of magisk 18.0.
I have not tested it yet for GApps but it work 100% for root
Problem
hi pls say me work this package in G5528 Oreo
If it Don't Work,What Should i do??
hossein_vlz1 said:
hi pls say me work this package in G5528 Oreo
If it Don't Work,What Should i do??
Click to expand...
Click to collapse
1. Download your device boot.img
2. Move to your phone SD Card
3. Install magisk apk
4. now setup you magisk output format as .img.tar
5. now click on install
6. click on patched boot image
7. Now browse you boot.img
8. now wait for success
9. now find "patched_boot.img.tar" and move to your pc
10. reboot your phone into download mode
11. now flash patched boot img with odin
12. now your phone will restart. if it shows reset button on bottom of screen than reset your phone
Done.
OK
and
How i do changing IMG file to TAR??
I can not flash by img file
hossein_vlz1 said:
OK
and
How i do changing IMG file to TAR??
I can not flash by img file
Click to expand...
Click to collapse
install magisk
open it and goto settings
there you see "Patched Boot Output Format" click on it
Now tick .img.tar
thats it now install magisk with patched boot img
alien.baba said:
Dear Friends,
I am here to update Root package for SM-G5520 G5520ZCU1CRK1 8.1.0
1. Download & Flash this file. Link
2. Reset your phone
3. setup your phone
4. Done
Your Phone is rooted now.
Note: this root may work for "Flashfire" to flash GApps, because it's update root of magisk 18.0.
I have not tested it yet for GApps but it work 100% for root
Click to expand...
Click to collapse
Flashfire not working.
He says install Magisk 18 again. However, Magisk 18 is not installed again.
alien.baba said:
install magisk
open it and goto settings
there you see "Patched Boot Output Format" click on it
Now tick .img.tar
thats it now install magisk with patched boot img
Click to expand...
Click to collapse
Bro My phobe later asked me to reset factory and i do
but magisc isn't installed
and apeared yellow tirangle on the boot
pls help me more
hossein_vlz1 said:
Bro My phobe later asked me to reset factory and i do
but magisc isn't installed
and apeared yellow tirangle on the boot
pls help me more
Click to expand...
Click to collapse
now install magisk manually with apk.
your root will done.
Note: you should connected with internet & Yellow triangle will show in boot.
Need Help
I have rooted samsung galaxy on5 g5520 using above method
but magisk is unable to flash magisk modules .
error is that magisk is unable to extract zip file .
and flashfire is not also openning
hi
imranhussain12 said:
I have rooted samsung galaxy on5 g5520 using above method
but magisk is unable to flash magisk modules .
error is that magisk is unable to extract zip file .
and flashfire is not also openning
Click to expand...
Click to collapse
I think
flash twrp via odin. then use twrp to install magisk
hey i have a sm-g5520 on5 2016 and i want to update it to 8.1.0 and root it for get gapps, but idk how to do it. can you tell me step by step for an older guy? i really want to do it
barinbektas said:
hey i have a sm-g5520 on5 2016 and i want to update it to 8.1.0 and root it for get gapps, but idk how to do it. can you tell me step by step for an older guy? i really want to do it
Click to expand...
Click to collapse
Biraz daha sabredin. Yakında birşeyler olacak.
Help with Magisk Installation
alien.baba said:
Dear Friends,
I am here to update Root package for SM-G5520 G5520ZCU1CRK1 8.1.0
1. Download & Flash this file. Link
2. Reset your phone
3. setup your phone
4. Done
Your Phone is rooted now.
Note: this root may work for "Flashfire" to flash GApps, because it's update root of magisk 18.0.
I have not tested it yet for GApps but it work 100% for root
Click to expand...
Click to collapse
I am trying to apply the above steps. But what do you mean by "flash" ?
Flash using ODIN or Magisk? If Magisk, how to install Magisk as it needs to go to fastboot mode? (as our device seems to be unable of going to fastboot mode)
smt_best said:
I am trying to apply the above steps. But what do you mean by "flash" ?
Flash using ODIN or Magisk? If Magisk, how to install Magisk as it needs to go to fastboot mode? (as our device seems to be unable of going to fastboot mode)
Click to expand...
Click to collapse
flash using Odin. it's petched_boot.img.tar file. you don't need to fo to fastboot go to download mode by pressing Volume Down+Home Button+Power On Key.