Dear Friends,
I am here to update Root package for SM-G5520 G5520ZCU1CRK1 8.1.0
1. Download & Flash this file. Link
2. Reset your phone
3. setup your phone
4. Done
Your Phone is rooted now.
Note: this root may work for "Flashfire" to flash GApps, because it's update root of magisk 18.0.
I have not tested it yet for GApps but it work 100% for root
Problem
hi pls say me work this package in G5528 Oreo
If it Don't Work,What Should i do??
hossein_vlz1 said:
hi pls say me work this package in G5528 Oreo
If it Don't Work,What Should i do??
Click to expand...
Click to collapse
1. Download your device boot.img
2. Move to your phone SD Card
3. Install magisk apk
4. now setup you magisk output format as .img.tar
5. now click on install
6. click on patched boot image
7. Now browse you boot.img
8. now wait for success
9. now find "patched_boot.img.tar" and move to your pc
10. reboot your phone into download mode
11. now flash patched boot img with odin
12. now your phone will restart. if it shows reset button on bottom of screen than reset your phone
Done.
OK
and
How i do changing IMG file to TAR??
I can not flash by img file
hossein_vlz1 said:
OK
and
How i do changing IMG file to TAR??
I can not flash by img file
Click to expand...
Click to collapse
install magisk
open it and goto settings
there you see "Patched Boot Output Format" click on it
Now tick .img.tar
thats it now install magisk with patched boot img
alien.baba said:
Dear Friends,
I am here to update Root package for SM-G5520 G5520ZCU1CRK1 8.1.0
1. Download & Flash this file. Link
2. Reset your phone
3. setup your phone
4. Done
Your Phone is rooted now.
Note: this root may work for "Flashfire" to flash GApps, because it's update root of magisk 18.0.
I have not tested it yet for GApps but it work 100% for root
Click to expand...
Click to collapse
Flashfire not working.
He says install Magisk 18 again. However, Magisk 18 is not installed again.
alien.baba said:
install magisk
open it and goto settings
there you see "Patched Boot Output Format" click on it
Now tick .img.tar
thats it now install magisk with patched boot img
Click to expand...
Click to collapse
Bro My phobe later asked me to reset factory and i do
but magisc isn't installed
and apeared yellow tirangle on the boot
pls help me more
hossein_vlz1 said:
Bro My phobe later asked me to reset factory and i do
but magisc isn't installed
and apeared yellow tirangle on the boot
pls help me more
Click to expand...
Click to collapse
now install magisk manually with apk.
your root will done.
Note: you should connected with internet & Yellow triangle will show in boot.
Need Help
I have rooted samsung galaxy on5 g5520 using above method
but magisk is unable to flash magisk modules .
error is that magisk is unable to extract zip file .
and flashfire is not also openning
hi
imranhussain12 said:
I have rooted samsung galaxy on5 g5520 using above method
but magisk is unable to flash magisk modules .
error is that magisk is unable to extract zip file .
and flashfire is not also openning
Click to expand...
Click to collapse
I think
flash twrp via odin. then use twrp to install magisk
hey i have a sm-g5520 on5 2016 and i want to update it to 8.1.0 and root it for get gapps, but idk how to do it. can you tell me step by step for an older guy? i really want to do it
barinbektas said:
hey i have a sm-g5520 on5 2016 and i want to update it to 8.1.0 and root it for get gapps, but idk how to do it. can you tell me step by step for an older guy? i really want to do it
Click to expand...
Click to collapse
Biraz daha sabredin. Yakında birşeyler olacak.
Help with Magisk Installation
alien.baba said:
Dear Friends,
I am here to update Root package for SM-G5520 G5520ZCU1CRK1 8.1.0
1. Download & Flash this file. Link
2. Reset your phone
3. setup your phone
4. Done
Your Phone is rooted now.
Note: this root may work for "Flashfire" to flash GApps, because it's update root of magisk 18.0.
I have not tested it yet for GApps but it work 100% for root
Click to expand...
Click to collapse
I am trying to apply the above steps. But what do you mean by "flash" ?
Flash using ODIN or Magisk? If Magisk, how to install Magisk as it needs to go to fastboot mode? (as our device seems to be unable of going to fastboot mode)
smt_best said:
I am trying to apply the above steps. But what do you mean by "flash" ?
Flash using ODIN or Magisk? If Magisk, how to install Magisk as it needs to go to fastboot mode? (as our device seems to be unable of going to fastboot mode)
Click to expand...
Click to collapse
flash using Odin. it's petched_boot.img.tar file. you don't need to fo to fastboot go to download mode by pressing Volume Down+Home Button+Power On Key.
Related
THIS IS FOR YU5011
1. DOWNLOAD THE RAR FILE AND EXTRACT IT.
2. FOLDER INCLUDES SCATTER FILE, DOWNLOAD AGENT AND PATCHED BOOT IMAGE.
3. READ "README" FILE AND FOLLOW IT.
New updated link (install magisk manager v5.9.1 after flashing this boot image) : https://drive.google.com/file/d/1yN0967HJbww6bzC9vxntEWRCfMHwG1dH/view?usp=drivesdk
jthnpeter said:
THIS IS FOR YU5011
1. DOWNLOAD THE RAR FILE AND EXTRACT IT.
2. FOLDER INCLUDES SCATTER FILE, DOWNLOAD AGENT AND PATCHED BOOT IMAGE.
3. READ "README" FILE AND FOLLOW IT.
Click to expand...
Click to collapse
Thanks for the boot image. I was able to flash the image and I get warning on the boot screen that it is patched image. After installing MagiskManager app I am unable to install the Magisk.zip file. How did you install magisk without customer recovery?
zerozero700 said:
Thanks for the boot image. I was able to flash the image and I get warning on the boot screen that it is patched image. After installing MagiskManager app I am unable to install the Magisk.zip file. How did you install magisk without customer recovery?
Click to expand...
Click to collapse
Install magisk.zip by clicking the install button in magisk manager (your operator may charge for data).
jthnpeter said:
Install magisk.zip by clicking the install button in magisk manager (your operator may charge for data).
Click to expand...
Click to collapse
I get option to download the zip file or patch the image. I can download the file. It doesn't get installed. I tried to install that zip from recovery, but I get error.
zerozero700 said:
I get option to download the zip file or patch the image. I can download the file. It doesn't get installed. I tried to install that zip from recovery, but I get error.
Click to expand...
Click to collapse
Do not install via stock recovery ever..
Flash the updated new boot image...then install latest magisk manager v5.9.1...
It will surely work
How do I hide the Orange State message?
Everything worked as expected - Unlocked bootloader, flashed newboot.img file, installed Magisk Manager and gained root access. But whenever the phone boots, there is a -
"Orange State
Your devices has been unlocked and can't be trusted
Your devices will boot in 5 seconds"
Is there any way to disable/hide the message? Not that it is causing problems but it looks ugly.
Can this method used in YU5012 also
Requirements / Downloads
Honor 10 view BKL-09 with unlocked bootloader (I not tested in other version)
Minimal ADB & Fastboot
Patched Recovery_Ramdisk BKL
Rooting your device
1. Unzip Minimal ADB & Fastboot to any folder of your PC
2. Download the patched file for your device and copy it to Minimal ADB & Fastboot folder.
3. Start your smartphone in fastboot mode pressing [Vol-]+[Power] and connect it to your PC.
4. Open a Powershell window in your Minimal ADB & Fastboot folder by [Shift]+[Rightclick].
5. Flash the Recovery_Ramdisk:
Code:
fastboot flash recovery_ramdisk name_of_your_patched_file.img
Adjusting Magisk Manager and patching files by yourself
1. Download Magisk Manager canary build to your phone and install.
2. Change in Magisk settings the update channel to "custom" inserting this URL. https://t2m.io/wuAFCrwO
Magisk Manager now will find the canary builds.
3. Check "force encryption" and "AVB 2.0" boxes.
To patch yourself recovery_ramdisk:
4.a) Patch your *.img, that you have copied in any folder to your smartphone by pressing "Install" --> "Install" --> "Patch boot image" in Magisk Manager.
ORIGINAL RECOVERY_RAMDISK BKL-09 PIE version 9.0.0.162 C432
5. Transfer the patched file (You will find it in your download folder of your smartphone. It will be called "patched_boot.img".) to your PC, start Smartphone in fastboot mode and flash:
Code:
fastboot flash recovery_ramdisk name_of_your_patched_file.img
(You must adapt the file name to the real name of your file, e.g. patched_boot.img)
To actualize Magisk:
4.b) Choose in Magisk Manager: "Install" --> "Install" --> "Direct Install (Recommended)" --> Restart
Thanks
Thanks a lot for this great guide!
Hello, will this also be on my bkl-l09c432? I have rom
blazios said:
Hello, will this also be on my bkl-l09c432? I have rom
Click to expand...
Click to collapse
If your device is on pie ?, yes
What should I use twrp?
blazios said:
What should I use twrp?
Click to expand...
Click to collapse
OP never mentioned anything about twrp. That is not needed
I Have same version as you Android Pie and everythin firmware and region... But no matter how i try i get UNABLE TO UNPACK BOOT IMAGE... Instalation failed... why is that? i have TWRP installed... and everything as is your phone firmware and version 9.0.0.162 C432...
BlueMan_86 said:
I Have same version as you Android Pie and everythin firmware and region... But no matter how i try i get UNABLE TO UNPACK BOOT IMAGE... Instalation failed... why is that? i have TWRP installed... and everything as is your phone firmware and version 9.0.0.162 C432...
Click to expand...
Click to collapse
Flash in bootloader mode. Not in twrp.
Android pie not work with twrp for now.
I am on ROOTED EMUI 8.0 (BKL-L09 8.0.0.130). How do I update to pie and then root? First unroot than update than root? or just update and root with the instructions in post#1?
Sadly it does not work for me. Tried it with your patches bootimage and with my own. Flashing the ramdisk works fine but after restart I don't have root.
I dont need Magisk installed if I use the pre patches bootimage right? Nevertheless I tried with Magisk installed and without. In the Huawei Mate Forum I read that one might need to shutdown the phone after flashing and then to start it with Volume Up and Power Button pressed. But this also does not work. Or any Idea how exactly to start with this Key combination?
Any other suggestions?
Today I updated from OREO with root to PIE same version as you have in pictures 9.0.0.162(C432E4R1P9). Tried both steps (with your patched file and me patching file) to root my phone but even I always got OK in fastboot mode I still have no root
Hello,
Sadly applying the guide does't not work for me to. I tried with the given patched bootimage and with my own one. When flashing the ramdisk image in fastboot mode, i got this error :
"FAILED (remote: partition length get error)".
Please help!
resdano said:
Hello,
Sadly applying the guide does't not work for me to. I tried with the given patched bootimage and with my own one. When flashing the ramdisk image in fastboot mode, i got this error :
"FAILED (remote: partition length get error)".
Please help!
Click to expand...
Click to collapse
I get the same error
any advise ?
Worked like a breeze for me. Shoutout to @ante0 and @shashank1320 who kept their calm in guiding me through and suggesting me this method.
@ante0 made things easier for me and it worked excellently for me. The steps are-
Download and install Magisk canary builds from the mentioned link. Change in Magisk settings the update channel to "custom" inserting*this*URL.*https://t2m.io/wuAFCrwO
Magisk Manager now will find the canary builds.
Check "force encryption" and "AVB 2.0" boxes.
Transfer stock recovery ramdisk to phone, open Magisk Mnager and hit install - > patch boot image, select recovery_ramdisk.img. Take patched_boot.img from /sdcard/Download/ and transfer to computer, reboot to fastboot and flash patched_boot.img to recovery_ramdisk. Unplug USB, holv vol up + power to reboot to recovery, which will now boot phone with Magisk. If you reboot and don't hold vol up it will boot to system without root.
---------- Post added at 02:08 PM ---------- Previous post was at 02:01 PM ----------
Huge thanks @fabio84
Finally have root privileges on Pie.
resdano said:
Hello,
Sadly applying the guide does't not work for me to. I tried with the given patched bootimage and with my own one. When flashing the ramdisk image in fastboot mode, i got this error :
"FAILED (remote: partition length get error)".
Please help!
Click to expand...
Click to collapse
davidsiv said:
I get the same error
any advise ?
Click to expand...
Click to collapse
Emui9 doesn't have a ramdisk partition. You flash to recovery_ramdisk, then when you reboot hold volume up to get to recovery (unplug USB as it will take you to erecovery if you have it plugged in).
This is the only way to get root on Emui9, currently.
It will not boot to recovery, it will boot to system with Magisk.
Not flash ramdisk. Need flash recovery_ramdisk!
worked, thanks
fabio84 said:
Not flash ramdisk. Need flash recovery_ramdisk!
Click to expand...
Click to collapse
@ante0 has been helping me get root access and we still are working on it.
@fabio84 did you by a chance experience issues in using root applications especially root explorer or root Uninstaller? For some reason they won't just work for me, just titanium and root checker works. On further scrutinising, I found the su binary files missing probably why the applications won't load for me. Any help?
ankan1993 said:
@ante0 has been helping me get root access and we still are working on it.
@fabio84 did you by a chance experience issues in using root applications especially root explorer or root Uninstaller? For some reason they won't just work for me, just titanium and root checker works. On further scrutinising, I found the su binary files missing probably why the applications won't load for me. Any help?
Click to expand...
Click to collapse
Update: @ante0 helped me yet again to figure it out. Apparently was because of pie's aggressive background restrictions. Root is now working full fledgedly. Thanks everyone. Big cheers to @ante0
Hello,
It finally worked for me. Thank you so much!
ante0 said:
Emui9 doesn't have a ramdisk partition. You flash to recovery_ramdisk, then when you reboot hold volume up to get to recovery (unplug USB as it will take you to erecovery if you have it plugged in).
This is the only way to get root on Emui9, currently.
It will not boot to recovery, it will boot to system with Magisk.
Click to expand...
Click to collapse
Last updated May 2020
Keeping it short. This is a simple way to root your device. You will need a computer and a data cable for this.
Objectives :
Have root using Magisk
Be able to install OTA from the settings without bootloops
Avoid boot loop
Very important :
This will work with ANY Xiaomi phone, and should work with ANY ANDROID phone as well. The difference between phones would be in where you can get your boot image from.
Your phone has to have an unlocked bootloader
Your phone has to have stock recovery. TWRP WILL cause bootloop for root and/or OTA updates from system.
I like to have root with magisk and don't want to install TWRP because I want to be able to install OTA from system without boot loops. This guide will help you achieve this with ease.
Steps:
Download the ROM full zip file. This could be the ROM ALREADY installed on your phone or you are updating your phone to it. Here is a video of one way to get your ROM file.
https://youtu.be/KsxHial1v1U
Open the file and extract "boot.img" on your phone or Computer.
Move the boot.img file to your phone
Download and install the latest Magisk official manager app from here: https://github.com/topjohnwu/Magisk/releases/download/manager-v7.4.0/MagiskManager-v7.4.0.apk
Open Magisk manager and click install then "select and patch a file" like in this video
https://youtu.be/USHcCMYlexM
Copy the Patched image from the download folder to your computer adb/fastboot folder
Reboot your phone into fastboot (press and hold power and vol down) and connect it to the computer
Flash that patches image file using fastboot
fastboot flash boot magisk_patched.img
Click to expand...
Click to collapse
fastboot reboot
Click to expand...
Click to collapse
Open Magisk manager and complete the installation if needed. The app will prompt you for action.
Enjoy
Update May 2020
Hello again,
Sorry for being away for so long. Here are some of the things I have noticed people are confused with and need to make them clear:
This method works for ANY Android phone. As long as you have the Correct boot.img and can unlock the bootloader
MAKE SURE 100% you have the correct boot.img file for your CURRENT ROM
MAKE 100% SURE, the boot.img file you get from the FULL ROM zip file, not an OTA update zip file
Make sure you check the date and time of the "magisk_patched.img" file to make sure that is the one you made
Make sure you use the LATEST magisk manager
Make sure you open magisk after flashing the magisk_patched.img as boot image. Magisk manager will tell you if there is another step needed, just click yes and it will be done in seconds
Make sure to enable "Hide Magisk" to allow you to have your BANK apps working as well as security checks
If any app you use gives you an error "YOU ARE Rooted bla bla bla" Use magisk manager to hide the root for this specific app (in the settings)
That's all I can remember, good luck
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Kiwironic said:
Keeping it short. This is a simple way to root your device. You will need a computer and a data cable for this.
Steps:
Download the ROM full zip file. This could be the ROM ALREADY installed on your phone or you are updating your phone to it. Here is a video of one way to get your ROM file.
Open the file and extract "boot.img" on your phone or Computer.
Move the boot.img file to your phone
Download and install the latest Magisk official manager app from here: https://github.com/topjohnwu/Magisk/releases/download/manager-v7.4.0/MagiskManager-v7.4.0.apk
Open Magisk manager and click install then "select and patch a file" like in this video
Copy the Patched image from the download folder to your computer adb/fastboot folder
Reboot your phone into fastboot (press and hold power and vol down) and connect it to the computer
Flash that patches image file using fastboot
Open Magisk manager and complete the installation if needed. The app will prompt you for action.
Enjoy
Click to expand...
Click to collapse
After fastboot flash, reboot, open magisk manager, tap INSTALL beside "magisk is up to date". Then select direct install; reboot.
Works on MIUI 11.0.2; davinciin. ??
I know that when I unlock the bootloader,the phone is going to reset...but,is it going to happen immediately or after that 168 hours of waiting?
Sent from my Xiaomi Mi 9T using XDA Labs
welder73 said:
I know that when I unlock the bootloader,the phone is going to reset...but,is it going to happen immediately or after that 168 hours of waiting?
Sent from my Xiaomi Mi 9T using XDA Labs
Click to expand...
Click to collapse
People report different amounts of wait time, depends on the mi account I think
welder73 said:
I know that when I unlock the bootloader,the phone is going to reset...but,is it going to happen immediately or after that 168 hours of waiting?
Sent from my Xiaomi Mi 9T using XDA Labs
Click to expand...
Click to collapse
Phone is reset when the bootloader is unlocked, not before/during the waiting time.
Can do with locked bootloader?
Micdu70 said:
Phone is reset when the bootloader is unlocked, not before/during the waiting time.
Click to expand...
Click to collapse
Thank you man :good:
Sent from my Xiaomi Mi 9T using XDA Labs
Cabeção-Flu said:
Can do with locked bootloader?
Click to expand...
Click to collapse
No, bootloader has to be unlocked.
@Kiwironic followed your guide and worked very well, although I had to wipe data through the stock recovery to get the phone to boot, I believe that's just how newer Xiaomi phones work. I do have one question though, now that I'm rooted with stock recovery, would I be able to install OTA updates? I'm assuming I would of course lose root and have to redo the process from scratch if that's the case.
Lazer Bear said:
@Kiwironic followed your guide and worked very well, although I had to wipe data through the stock recovery to get the phone to boot, I believe that's just how newer Xiaomi phones work. I do have one question though, now that I'm rooted with stock recovery, would I be able to install OTA updates? I'm assuming I would of course lose root and have to redo the process from scratch if that's the case.
Click to expand...
Click to collapse
I had root on MIUI10 and updated the ROM to MIUI11 then did my root again the way mentioned and did NOT have to wipe. You can get OTA anyway, it will try the update first, it will fail, then it download and install a full ROM zip automatically. You have to wait for it to do that twice, that's all. The first boot after the update takes some time.
@Kiwironic First, thank you so your simple guide!
Can this cause bootloop on my device? If yes, can I simply flash the original boot.img to boot without any data loss?
Also another question: my device is rootless and bootloader unlocked, so my Google Pay doesn't work. When installing Magisk it goes back to work immediately or I have to do something to work?
kryzeK said:
@Kiwironic First, thank you so your simple guide!
Can this cause bootloop on my device? If yes, can I simply flash the original boot.img to boot without any data loss?
Also another question: my device is rootless and bootloader unlocked, so my Google Pay doesn't work. When installing Magisk it goes back to work immediately or I have to do something to work?
Click to expand...
Click to collapse
If you flash the full rom, chances of bootloop is minimal. And should have stock experience except for being unlocked.
I got bootloop, using indian global V11.0.2.0.
After flashing patched boot, it gets bootloop recovery, only way is to wipe all data and reboot
After booting up and opeing magisk it shows a recommendation to install some ZIP
Accepting the recommendation results in bootloop,
Rejecting the recommendation and trying to Install > Direct Install results in bootloop as well
Posted a thread with this issue here
stone_henge said:
I got bootloop, using indian global V11.0.2.0.
After flashing patched boot, it gets bootloop recovery, only way is to wipe all data and reboot
After booting up and opeing magisk it shows a recommendation to install some ZIP
Accepting the recommendation results in bootloop,
Rejecting the recommendation and trying to Install > Direct Install results in bootloop as well
Posted a thread with this issue here
Click to expand...
Click to collapse
This
I got the exact same issue, every time it asked me to install additional zip files it went into recovery immediately after booting up.
Anyone know why this happened?
oblyvision said:
This
I got the exact same issue, every time it asked me to install additional zip files it went into recovery immediately after booting up.
Anyone know why this happened?
Click to expand...
Click to collapse
Do you have stock recovery or TWRP? Which version of Magisk are you using?
I have patched my boot stock image, installed full ROM, then flashed the patched boot image. Magisk did not show any recommendation installation.
There are a few guides online on how to deal with Magisk Bootloop without the need to wipe data.
Kiwironic said:
Do you have stock recovery or TWRP? Which version of Magisk are you using?
I have patched my boot stock image, installed full ROM, then flashed the patched boot image. Magisk did not show any recommendation installation.
There are a few guides online on how to deal with Magisk Bootloop without the need to wipe data.
Click to expand...
Click to collapse
TWRP 3.3.1-8, magisk 20.1
Patching boot image with magisk wasn't a problem. The Superuser itself works normally, module doesn't. The magisk manager suggested to download additional files for the magisk to be working properly.
I'm on MIUI 11.0.1 Global
Was TWRP the cause in the fist place?
oblyvision said:
TWRP 3.3.1-8, magisk 20.1
Patching boot image with magisk wasn't a problem. The Superuser itself works normally, module doesn't. The magisk manager suggested to download additional files for the magisk to be working properly.
I'm on MIUI 11.0.1 Global
Was TWRP the cause in the fist place?
Click to expand...
Click to collapse
On first installation MM asks to download what it needs e.g. to verify SafetyNet. Allow and there is no problem about. TWRP is generally not needed to install Magisk. Things are documented in Magisk guides
https://topjohnwu.github.io/Magisk/
https://www.didgeridoohan.com/magisk/HomePage
oblyvision said:
TWRP 3.3.1-8, magisk 20.1
Patching boot image with magisk wasn't a problem. The Superuser itself works normally, module doesn't. The magisk manager suggested to download additional files for the magisk to be working properly.
I'm on MIUI 11.0.1 Global
Was TWRP the cause in the fist place?
Click to expand...
Click to collapse
Yes, as the title suggests "without TWRP". The reason is, you cannot install OTA and magisk easily without using the stock recovery. Any attempt to update OTA or use any recovery script on the phone will result in a boot loop.
The solution to get out of the boot loop is simple. Actually a couple of solutions.
One, flash your stock recovery, or
Two, flash a full ROM that includes the stock recovery.
No need to wipe data
That's the only reason I made this post and the other about OTA on root. I don't like to use TWRP because I want OTA install without boot loop. At the same time I want root. Hence the solutions I provided
Kiwironic said:
Yes, as the title suggests "without TWRP". The reason is, you cannot install OTA and magisk easily without using the stock recovery. Any attempt to update OTA or use any recovery script on the phone will result in a boot loop.
The solution to get out of the boot loop is simple. Actually a couple of solutions.
One, flash your stock recovery, or
Two, flash a full ROM that includes the stock recovery.
No need to wipe data
That's the only reason I made this post and the other about OTA on root. I don't like to use TWRP because I want OTA install without boot loop. At the same time I want root. Hence the solutions I provided
Click to expand...
Click to collapse
I've tried flashing magisk via recovery and didn't work, the same bootloop. Here's the thread: https://forum.xda-developers.com/mi-9t/how-to/guide-miui-11-v11-0-1-0-pfjmixm-rooted-t3997299
I thought this might be a working alternative.
Gotta try installing magisk with stock recovery then, and if it still didn't work, well, more research for me..
oblyvision said:
I've tried flashing magisk via recovery and didn't work, the same bootloop. Here's the thread: https://forum.xda-developers.com/mi-9t/how-to/guide-miui-11-v11-0-1-0-pfjmixm-rooted-t3997299
I thought this might be a working alternative.
Gotta try installing magisk with stock recovery then, and if it still didn't work, well, more research for me..
Click to expand...
Click to collapse
You have to understand the requirements :
- stock recovery
- install magisk manager app
- patch the boot image for your stock ROM (same version on your phone)
- flash that Patched boot image.
- reboot
- done, that's magisk installed
Rooting Samsung Galaxy M30s SM-M307F with Magisk v20.1 + Video. Magisk v20.1 works stable on SM-M307F with ASJ2 firmware and August 1, 2019 Security Path Level. Lock screen, Biometrics and security worked without any issue, there is not randoom bootloop. Follow these steps below:
1. Make sure the boot loader are unlocked ( OEM options is enabled with grey color ) unlock booloader video https://youtu.be/5juwDL0u_D4
2. Download the firmware Galaxy M30s SM-M307F that match with your region.
3. Unzip the firmware and copy the AP tar file to your device. It is normally named as AP_[device_model_sw_ver].tar.md5. Copy AP tar file and MagiskManager-v7.4.0.apk to your phone.
4. Install Magisk Manager ( MagiskManager-v7.4.0.apk ) on your phone.
5. In Magisk Manager: Install → Install → Select and Patch a File
6. Select the AP tar file. Magisk Manager will patch the whole firmware file and store the output to [Internal Storage]/Download/magisk_patched.tar. Copy magisk_patched.tar the tar file to your PC
7. Reboot to Bootloader: Turn Power Off. Press and hold Volume Up key + Power Key, When Samsung Logo appears release Power Key only, keep pressing Volume Up key until Android Recovery Mode Appears. Select Wipe data / Factory reset. Select Reboot to bootloader. Connect the phone to PC using USB Cable.
8. Flash magisk_patched.tar as AP in ODIN, together with the BL, CP and HOME_CSC files.
Important: check “Auto Reboot” and "F. Reset time" only in Options!
9. Magisk is now successfully flashed to your device!
10. After the device is booted up, do the usual initial setup. It need more time and patient.
11. Connect the phone to Internet, Then Copy Magisk Manager apk file to your phone and install it.
12. Open Magisk Manager. It will ask to do additional setups. Let it do its job and the app will automatically reboot your device.
13. Done! Your phone root with Magisk v20.1, Enjoy!
14. If you faced annoying OneDrive Pop-Up you can watch in the last video how to fix it
Rooting Video
Note: Rooting M30s is easy than A50s
What about recovery?
ashwin_tembhekar said:
What about recovery?
Click to expand...
Click to collapse
No body develop recovery for this model right now
You need to again wipe data after flashing magisk_patched.tar
I'm still on August security patch! Samsung wtf????
Thank you my friend it is a successful method
Everything done step by step sucessfully
No issues at all...AWESOME!
Everything done step by step sucessfully
But
Phone reboots
quite often while using...
Hritwik said:
You need to again wipe data after flashing magisk_patched.tar
Click to expand...
Click to collapse
***WHY sir???
Random reboots
Hello Team,
after rooting working smooth except of random reboots. removed root now no reboots. please help. i ant root access.
Graphic_Artist_Nik said:
But
Phone reboots
quite often while using...
Click to expand...
Click to collapse
tanweer17 said:
Hello Team,
after rooting working smooth except of random reboots. removed root now no reboots. please help. i ant root access.
Click to expand...
Click to collapse
you must clear magisk data/cache the steps:
1. Boot system without magisk
2. clear magisk data/cache ( don't run it after clear data/cache)
3. Boot system with magisk
Done!
Watch this video full video rooting M30s SM-M307F included how to fix the bootloop
https://youtu.be/Q7m_mUxQaZQ
Twrp for this phone, I don't want to flash any magisk patched rom, just needed twrp for flashing,
BootLoader Unlocking
Is BootLoader unlocking compulsory for flashing stock firmware?
I got an update notification for magisk. How to properly update magisk (not magisk manager) after it's already installed? I am afraid that it will bootloop my installation. I used magisk patched twrp method.
andreidi said:
I got an update notification for magisk. How to properly update magisk (not magisk manager) after it's already installed? I am afraid that it will bootloop my installation. I used magisk patched twrp method.
Click to expand...
Click to collapse
I suggest you to use TWRP, It was available. TWRP is safe and there is no bootloop issue. See this thread for TWRP https://forum.xda-developers.com/ga.../unofficial-twrp-3-3-1-0-galaxy-m30s-t4035019
For rooting video you can watch this video https://www.youtube.com/watch?v=7xyo0O_zuZA
I already rooted and installed twrp with magisk. But I get update norification from magisk. How to update? I have 3 options: direct install, patch a file or download zip.
help, where finishing the Odin stopped in modem or cache please help>>>
is there a custom rom SM-A107f ?
and how to install TWRP recovery on SM-A107f?
-No
-And does not exist yet from what I can tell.
ShaDisNX255 said:
-No
-And does not exist yet from what I can tell.
Click to expand...
Click to collapse
thats a sad news
Consider this
ddiv1de said:
thats a sad news
Click to expand...
Click to collapse
Have you tried gsi roms? for more information head over to geektoandroid.com i hope this helps
Infant9099 said:
Have you tried gsi roms? for more information head over to geektoandroid.com i hope this helps
Click to expand...
Click to collapse
I've tried a couple, none have booted for me.
GSI Treble rom
ShaDisNX255 said:
I've tried a couple, none have booted for me.
Click to expand...
Click to collapse
I currently have a Samsung galaxy A105F/DS-U3 and it supports treble and seamless update - a/b. I have searched and it has lineageOS , Paranoid android and ViperOS. I'm gonna try LineageOS 17.0 - which gives me Anddroid Q. I'll let you know if i find one for you.
Infant9099 said:
I currently have a Samsung galaxy A105F/DS-U3 and it supports treble and seamless update - a/b. I have searched and it has lineageOS , Paranoid android and ViperOS. I'm gonna try LineageOS 17.0 - which gives me Anddroid Q. I'll let you know if i find one for you.
Click to expand...
Click to collapse
You have the A10, which is a bit different than the A10s so it is most likely that any GSI that boots to your phone will not boot for mine. Besides, A10s does not have TWRP yet and A10 does
Infant9099 said:
I currently have a Samsung galaxy A105F/DS-U3 and it supports treble and seamless update - a/b. I have searched and it has lineageOS , Paranoid android and ViperOS. I'm gonna try LineageOS 17.0 - which gives me Anddroid Q. I'll let you know if i find one for you.
Click to expand...
Click to collapse
any luck pal?
Infant9099 said:
I currently have a Samsung galaxy A105F/DS-U3 and it supports treble and seamless update - a/b. I have searched and it has lineageOS , Paranoid android and ViperOS. I'm gonna try LineageOS 17.0 - which gives me Anddroid Q. I'll let you know if i find one for you.
Click to expand...
Click to collapse
any luck pal?
Can A107F (A10s) be rooted?
Rootthegalaxy said:
Can A107F (A10s) be rooted?
Click to expand...
Click to collapse
Yes.
how to root SM-A107f Samsung Galaxy A10s
ShaDisNX255 said:
Yes.
Click to expand...
Click to collapse
so this is what i did to root my A10s.
1. check what binary your phone is running I already updated mine so my phone is on Android 10 binary 6.
how to check your binary - goto setings-about phone-software info, check Baseband version so on my phone its A107FXXU6BTES the U6 indicates your binary some has U3 binary 3 or U5, S5 binary 5
once you determined your binary.
2. activate DEVELOPER OPTIONS then activate OEM UNLOCK
samfw.com/firmware/SM-A107F/XTC/A107FXXU6BTF
go to this website and download the appropriate firmware.
each will contain a BL, AP, CP, and Home_CSC.
3. once finished downloading unlock your bootloader just boot to download mode then there is an option to press and HOLD VOLUME UP to unlock bootloader then press volume up again. if it didn't reboot instantly press and hold volume up and down again just do it again until when you choose to unlockbootloader it will reboot instatly.
4. after unlocking bootloader just go through the entire process of setting up your phone keep the bootloader unlock, INSTALL Magisk manager, so yeah install magisk choose patch image then from your downloaded firmware remove the "MD5" at the end of the files so it will be AP_A107F.tar then choose the AP to patch hrough magisk
5. after patching copy the patched file to your PC extract it by WINRAR get the boot.img if its boot.img.lz4 it means patch was not sucessful
6. after getting the boot.img copy it to your phone again and patch again make sure to rename it boot.img from inside the generated patch file then compress it as TAR using 7zip
7. flash it through odin on AP section and there your magisk rooted.
sorry for the long post
nyxl said:
how to root SM-A107f Samsung Galaxy A10s
so this is what i did to root my A10s.
1. check what binary your phone is running I already updated mine so my phone is on Android 10 binary 6.
how to check your binary - goto setings-about phone-software info, check Baseband version so on my phone its A107FXXU6BTES the U6 indicates your binary some has U3 binary 3 or U5, S5 binary 5
once you determined your binary.
2. activate DEVELOPER OPTIONS then activate OEM UNLOCK
samfw.com/firmware/SM-A107F/XTC/A107FXXU6BTF
go to this website and download the appropriate firmware.
each will contain a BL, AP, CP, and Home_CSC.
3. once finished downloading unlock your bootloader just boot to download mode then there is an option to press and HOLD VOLUME UP to unlock bootloader then press volume up again. if it didn't reboot instantly press and hold volume up and down again just do it again until when you choose to unlockbootloader it will reboot instatly.
4. after unlocking bootloader just go through the entire process of setting up your phone keep the bootloader unlock, INSTALL Magisk manager, so yeah install magisk choose patch image then from your downloaded firmware remove the "MD5" at the end of the files so it will be AP_A107F.tar then choose the AP to patch hrough magisk
5. after patching copy the patched file to your PC extract it by WINRAR get the boot.img if its boot.img.lz4 it means patch was not sucessful
6. after getting the boot.img copy it to your phone again and patch again make sure to rename it boot.img from inside the generated patch file then compress it as TAR using 7zip
7. flash it through odin on AP section and there your magisk rooted.
sorry for the long post
Click to expand...
Click to collapse
HOW THA?
it worked guy
thank yu guy
I hope that you maybe able to help me as my bootloader will not load
1 The OEM UNLOCK is on
2 Have pressed buttons as instructions but the phone just switches of
guyz that they dont know how to write magisk patch with odin
i had same problem that when i started to writing i got a failed error
if your bootloader is unlocked and yu renamed patched.img to boot.img
but yu got error do this :
change your frimware
if your a10s frimware is
A107FU5ATA9 it dosent support any root . change your frimware to a107fxxs5asl3
now start patching magisk !
Mirloo_HK said:
guyz that they dont know how to write magisk patch with odin
i had same problem that when i started to writing i got a failed error
if your bootloader is unlocked and yu renamed patched.img to boot.img
but yu got error do this :
change your frimware
if your a10s frimware is
A107FU5ATA9 it dosent support any root . change your frimware to a107fxxs5asl3
now start patching magisk !
Click to expand...
Click to collapse
Hi '''Mirloo''''About rooting the (Samsung Galaxy 10s SM-A107f) I have tried most of the rooting akps with no luck (cfautoroot I have not tried yet)'''''''As for using Odin & magisk I am getting so many different instructions from different posts
1 unlock the bootloader This I have done successfully
The next steps using Magisk & Odin Start to get misleading
one site says Copy the AP to your phone and patch it where another site says says change the format of the AP file to tar by deleting .mds then copy it to your phone
I seem to get confused now as what to do next ''''Please could you give me full instructions ....Thank you
I have attempted to patch boot.img around 7 times unsuccessfully, I have the SM-A107F, can someone please send me the correctly patched boot image for my device, will be much appreciated.
i have this device, SM-A107F/DS, still no custom rom? is it possible to install lineage os?
fatdog1 said:
i have this device, SM-A107F/DS, still no custom rom? is it possible to install lineage os?
Click to expand...
Click to collapse
I'm also waiting for this. Tried flashing twrp recovery using odin but I failed. The error says "only official binaries are allowed to be flashed" tried flashing the original firmware but same error. Wondering why.