I searched in Google but i cannot find any custom recovery that compatible with i9100 flashed CM12.1 Nightlies
I need to do NAND backup but i cant find it on Cyanogen Recovery
Any suggestion?
Any links to download the custom recovery?
Any suggestion would be thanked
Here is Philz signed Recovery, which you can simply flash through cyanogen recovery.
https://www.dropbox.com/s/veqsqw7wrz9of7q/philz_touch_6.07.9-i9100.zip?dl=0
Gesendet: S2/ XDA Forums
BenjyTec said:
Here is Philz signed Recovery, which you can simply flash through cyanogen recovery.
https://www.dropbox.com/s/veqsqw7wrz9of7q/philz_touch_6.07.9-i9100.zip?dl=0
Gesendet: S2/ XDA Forums
Click to expand...
Click to collapse
Thanks, it is compatible with the CM12.1 ?
Sent from my GT-I9100 using Tapatalk
Yes, worked for me with 12.1 .
Gesendet: S2/ XDA Forums
水島芝 said:
Thanks, it is compatible with the CM12.1 ?
Sent from my GT-I9100 using Tapatalk
Click to expand...
Click to collapse
yes it is, (just flashed this recovery from CM recovery and installed cm 12.1 nightly)
For my I9100 it doesn't work. After the flashing of the Philz recovery I've installed the last CM12.1, and the CM recovery has overwrote the Philz recovery. The same issue of ever.
Note that the option "update recovey" in the setting menu isn't active.
MbMax said:
For my I9100 it doesn't work. After the flashing of the Philz recovery I've installed the last CM12.1, and the CM recovery has overwrote the Philz recovery. The same issue of ever.
Note that the option "update recovey" in the setting menu isn't active.
Click to expand...
Click to collapse
You'll have to reflash Philz every time you update
BTW, there's an updated TWRP recovery out, I recommend to use this one instead: https://www.androidfilehost.com/?fid=24052804347833059
BenjyTec said:
BTW, there's an updated TWRP recovery out, I recommend to use this one instead
Click to expand...
Click to collapse
This is a great news. Many thanks....
Related
how to install a rom without a cwm bootloop?
Make sure you're on latest twrp or cwm or don't flash aokp rom's. That should generally be it
Sent from my sgs2 running cm9
Makrilli said:
Make sure you're on latest twrp or cwm or don't flash aokp rom's. That should generally be it
Sent from my sgs2 running cm9
Click to expand...
Click to collapse
but if i flash the latest twrp with cwm touch(not last version) than i also not get a bootloop?
leime68 said:
but if i flash the latest twrp with cwm touch(not last version) than i also not get a bootloop?
Click to expand...
Click to collapse
Theres a repacked cwm touch in drv section that also has the fix.
sent from my i9250
The best is to flash recovery with fastboot to avoid the risk.
And I have aokp and no bootloop....
Am a beginer in this awesome flashing world,so trying to understand the basics...
Recently I rooted my phone (I9100) and installed Philz touch based CWM but after flashing a custom ROM the CWM was changed to
non touch ,so my question is does a ROM installs its own CWM along with its kernel overwriting
the exisiting CWM on my phone?
Is there any way to keep the Philz touch based CWM after flashing the ROM
Hello and welcome.
Yes, it may be that each rom installs its own kernel along with CWM.
And yes, you can download the philz touch version from XDA and flash it using Recovery. Just search for it in the forum.
Squaredot said:
Hello and welcome.
Yes, it may be that each rom installs its own kernel along with CWM.
And yes, you can download the philz touch version from XDA and flash it using Recovery. Just search for it in the forum.
Click to expand...
Click to collapse
ok thanks a lot for your reply....
Yes each rom has its only recovery be it cwm or twrp and don't flash philz on a custom rom. Philz is for stock based roms only.
Requesting that someone make a flashable zip from the newest CWM Touch Image, especially as new 4.4 KitKat ROMs are requiring CWM-based recoveries.
I understand that this can be accomplished through ROM Manager (but I'm getting a download error) or through fast-boot/adb (which I admittedly don't have the time, patience or complete understanding to do) so if someone had time to make a flashable zip, I'd imagine that'd benefit the community greatly.
There is an older version here (http://forum.xda-developers.com/showthread.php?t=1584576) but OP is no longer updating or supporting.
Will attach the IMG below. Thank you.
Clockworkmod Touch Recovery 6.0.4.3 flashable zip supplied by Naddict in Post #4
Naddict said:
try this,
Click to expand...
Click to collapse
Please be sure to Thank him!
clepperM said:
Requesting that someone make a flashable zip from the newest CWM Touch Image, especially as new 4.4 KitKat ROMs are requiring CWM-based recoveries.
I understand that this can be accomplished through ROM Manager (but I'm getting a download error) or through fast-boot/adb (which I admittedly don't have the time, patience or complete understanding to do) so if someone had time to make a flashable zip, I'd imagine that'd benefit the community greatly.
There is an older version here (http://forum.xda-developers.com/showthread.php?t=1584576) but OP is no longer updating or supporting.
Will attach the IMG below. Thank you.
Click to expand...
Click to collapse
Check this out. You can get flashable zip.
http://www.youtube.com/watch?v=nY_vE-dUSX4
clepperM said:
Reserved
Click to expand...
Click to collapse
try this,
Naddict said:
try this,
Click to expand...
Click to collapse
Thank you Naddict. Has anyone flashed with the CWM zip version? Has anyone successfully gone back to Twrp? Any issues flashign oen tot he other?
tonyo123 said:
Thank you Naddict. Has anyone flashed with the CWM zip version? Has anyone successfully gone back to Twrp? Any issues flashign oen tot he other?
Click to expand...
Click to collapse
I haven't flashed a cwm zip, I just use rom manager to install it. But I've gone back and forth a few times recently with no problems. Just messing around the other day I installed a 4.4 and set it up and then flashed twrp and backed up the 4.4. Wiped the phone went back to a 4.3 and then restored the 4.4 nandroid with twrp without any troubles. Apparently it's the initial install that you need cwm for, but caution is advised for now as the next time it may not work. I was bored and just messing around. As always YMMV!
Is there a way to flash cwm on the official firmware for this phone using Odin?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
lildoggs said:
Is there a way to flash cwm on the official firmware for this phone using Odin?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
I believe that you need to get the .img file and change it into a .img.tar file to flash it in odin.
tonyo123 said:
Thank you Naddict. Has anyone flashed with the CWM zip version? Has anyone successfully gone back to Twrp? Any issues flashign oen tot he other?
Click to expand...
Click to collapse
I had made my own cwm touch flash zip as others have instructed. You just flash it with twrp if that's what using and use twrp to reboot to recovery to see the newly flashed cwm touch recovery. Vice versa for installing twrp again. However; just remember, backups can only be restored from recovery they were made with.
Sent from my SAMSUNG-SGH-I717 using Tapatalk
Can I flash this while in a previous cwm recovery ?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
crxlvr said:
Can I flash this while in a previous cwm recovery ?
Sent from my SAMSUNG-SGH-I717 using xda app-developers app
Click to expand...
Click to collapse
Sure. I assume you have your previous version zip in case you want to flash back? I just have latest cwm touch and twrp 2.6.1.0. and twrp 2.5 that I keep on hand.
Sent from my SAMSUNG-SGH-I717 using Tapatalk
Naddict said:
try this,
Click to expand...
Click to collapse
Thank you. That was the easiest way to flash CWM 6.0.4.3 to my Note.
Naddict said:
try this,
Click to expand...
Click to collapse
hafridi said:
Thank you. That was the easiest way to flash CWM 6.0.4.3 to my Note.
Click to expand...
Click to collapse
Agreed. My sincerest thanks, sir.
Thanks!
Since my usb is all screwed up (i rotate batteries on external charger) i can't use odin to do my CWM flash.
This is exactly what i need.
Thanks!!!
Thanks!
Need kernel source code used for that recovery
Hi guys,
I was wondering if someone could post the kernel source code that was used for that clockword mod recovery. I need to create a insertable kernel module in recovery mode for the samsung galaxy note.
Regards
cwm recovery zip
Can this cwm recovery zip be used for any phone? And can it be flashed to a phone using rashr?
paramzzthakkarzz said:
Can this cwm recovery zip be used for any phone? And can it be flashed to a phone using rashr?
Click to expand...
Click to collapse
As long as your phone is a SAMSUNG-SGH-I717 (codename used in these forums "quincyatt" is the same thing) you can use a quincyatt recovery.
Sent from my SAMSUNG-SGH-I717
Micromax
My phone is Micromax a190. The model no. Is not yet uploaded on XDA and I don't have any recoveries available for my phone nor do I have any custom Roms available. What do I do now?
paramzzthakkarzz said:
My phone is Micromax a190. The model no. Is not yet uploaded on XDA and I don't have any recoveries available for my phone nor do I have any custom Roms available. What do I do now?
Click to expand...
Click to collapse
Wait for a developer to create tools, ROMs, custom recoveries for your device or if you have the time, patience, and knowledge, check out xda-university.
http://xda-university.com/
Sent from my SAMSUNG-SGH-I717
This recovery is more or less useless now. Files will still be hosted though.
ClockworkMod Recovery
Samsung Galaxy SII GT-I9100
All right guys im just going to keep this real nice and simple. Purpose of thread:
Latest CWM Recovery
Kit Kat 4.4 ROM Installation Compatible
Centralized Place to Put The Latest Recoveries
Just a heads up. This is NOT meant to be used as a kernel. I compiled these recoveries from source and only the recovery module is built therefore YOUR PHONE WILL NOT BOOT COMPLETELY AS THERE IS NO KERNEL. I made these recoveries so that users can flash
From ICS/JB to KK with ease
Flash This Over DorimanX Kernel So That You Can Update Your Kit Kat ROM
And Resolve Status 7 Errors When Flashing Kit Kat ROMs On A Out-Dated CWM Recovery
How To Use:
To Flash a Kit Kat ROM From a Out-Dated Recovery CWM Version Less Then 6.0.4.4:
Flash This CWM Recovery File (Does Not Matter Which Version You Pick Just Take The Latest) And Reboot Back Into Recovery Via The Option In The Advanced Menu
You Should Now Have A Grey Coloured Recovery With Version 6.0.4.X
Follow ROM Installation Guide From ROM Thread
Recovery Versions
Click The Numbers To Download e.g. 6.0.4.6
6.0.4.6 (Compiled From CM10.2 JB 4.3.1 Soruce)
6.0.4.7 (Compiled From CM11 KK 4.4.2 Source) (LATEST)
Thanks For Reading :good:
P.S. This is my first thread in the Galaxy SII forum
XDA:DevDB Information
ClockWorkMod Recovery For SGSII GT-I9100, Kernel for the Samsung Galaxy S II
Contributors
-Grift-, cyanogen
Kernel Special Features: Kit Kat Compatible CWM
Version Information
Status: Stable
Current Stable Version: 6.0.4.7
Stable Release Date: 2014-01-29
Created 2014-01-29
Last Updated 2014-08-16
good job! but i have to ask is Stweaks compatible?
Thanks for your efforts. Download link?
EDIT: Found it
edd89 said:
good job! but i have to ask is Stweaks compatible?
Click to expand...
Click to collapse
Its just the recovery module no use for stweaks :angel:
spectator123 said:
Thanks for your efforts. Download link?
Click to expand...
Click to collapse
Woa you guys are fast.. Just added
haha yes we are buddy keep up the good work
tried to flash this via CWM...does not work. am i doing anything wrong?
how do i install it normaly?
QuAn64m said:
tried to flash this via CWM...does not work. am i doing anything wrong?
how do i install it normaly?
Click to expand...
Click to collapse
Was there a error code?
Edit: Wait hold on you are using a GT-I9100G?????? This is only for the Exynos Galaxy SII GT-I9100/P/M/T
-Grift- said:
Was there a error code?
Click to expand...
Click to collapse
code 7 :-/
---------- Post added at 04:51 PM ---------- Previous post was at 04:29 PM ----------
QuAn64m said:
code 7 :-/
Click to expand...
Click to collapse
oops...my fault...i use a sgs2 G version. sorry !
can i flash this recovery on jb stock recovery??
scorpion.hbs said:
can i flash this recovery on jb stock recovery??
Click to expand...
Click to collapse
No you cannot but the fastest way to get from stock 4.1.2 to Kitkat 4.4 is to
1. Download this into external SDcard
2. Download my recovery and what ever ROM+Files you need into internal/external
3. Flash first file in stock recovery
4. Flash my recovery, reboot back into recovery
5. Wipe data+cache (factory reset)
6. Flash the ROM+Files
7. Reboot
:good:
@Grift, must say have been following your work/posts for sometime now and find/enjoy the way you can explain a lot of ( detail ) clearly without using many too English words. haha.
Thank you very much for this post & code CWM kk compatible.
foot note/tip. upgrade/flash Direct from ICS404 to KKat is possible But the user Must Format /system /data /cache within CWM Kkat as normal factory reset doesn't work for such a big version jump.(my thoughts/theory only).
Usual warning Nandroid backup First as all Rom data Lost doing it this way.
Copy of request below if possible. @Grift. If possible can you release a Temporary version of your (CWM kitkat with out kernel).
Similar to what Philz was releasing for GT i9100.
Reason for request. Is at moment Dorimanx kernel has older cwm. So when I flash permanent CWM kk compatible then re-flash Dori it can break 2nd ROM boot access/entry.
Therefore if possible a Temp version of what you are doing/releasing would be Perfect for my & others dualboot kitkat problems.
Thanks in advance bmad.
Barry Mad said:
@Grift, must say have been following your work/posts for sometime now and find/enjoy the way you can explain a lot of ( detail ) clearly without using many too English words. haha.
Thank you very much for this post & code CWM kk compatible.
foot note/tip. upgrade/flash Direct from ICS404 to KKat is possible But the user Must Format /system /data /cache within CWM Kkat as normal factory reset doesn't work for such a big version jump.(my thoughts/theory only).
Usual warning Nandroid backup First as all Rom data Lost doing it this way.
Copy of request below if possible. @Grift. If possible can you release a Temporary version of your (CWM kitkat with out kernel).
Similar to what Philz was releasing for GT i9100.
Reason for request. Is at moment Dorimanx kernel has older cwm. So when I flash permanent CWM kk compatible then re-flash Dori it can break 2nd ROM boot access/entry.
Therefore if possible a Temp version of what you are doing/releasing would be Perfect for my & others dualboot kitkat problems.
Thanks in advance bmad.
Click to expand...
Click to collapse
Will take a look into it:good:
@-Grift-
How much space is needed to compile a recovery in ubuntu? All, do I need trees used for building roms?
Aiko0923 said:
@-Grift-
How much space is needed to compile a recovery in ubuntu? All, do I need trees used for building roms?
Click to expand...
Click to collapse
I believe you do need the sources. From what I see you work on the Desire HD (Ace) ? Either you download the sources and compile from there or you can try Koush's CWM builder ( just search CWM builder on google ). As for source code Cm10.2 source can be upwards of 10GB easily. For the DHD im not sure if you guys have official CM11 source?
-Grift- said:
I believe you do need the sources. From what I see you work on the Desire HD (Ace) ? Either you download the sources and compile from there or you can try Koush's CWM builder ( just search CWM builder on google ). As for source code Cm10.2 source can be upwards of 10GB easily. For the DHD im not sure if you guys have official CM11 source?
Click to expand...
Click to collapse
We've got unofficial builds of cm11, and most devs have release pretty stable device and kernel trees. Thanks, 10GB isn't bad at all, but will it require me to setup my Build Environment differently?
Cwm
I'm running cwm version 5.8.1.5 and on stock rom 4.1.2. I am thinking of upgrading to 4.4.2. So can u just explain how to proceed with the recovery installation?
Okay can anyone help me? My odin 3.09 while flashing cwm 6.0.2.9 said reset instead of pass. Then phone turned off. After that I can only access download mode and it shows flash counter 2 times. Any help? Was running stock 4.1.2 rooted.
Sent from my Nexus 4
Sent from my Nexus 4
AndroidReborn said:
Okay can anyone help me? My odin 3.09 while flashing cwm 6.0.2.9 said reset instead of pass. Then phone turned off. After that I can only access download mode and it shows flash counter 2 times. Any help? Was running stock 4.1.2 rooted.
Sent from my Nexus 4
Sent from my Nexus 4
Click to expand...
Click to collapse
Flash this in odin
http://www.dorimanx.shine.sk/Androi...rimanx-V8.43-[12-21]-[24-10]-TAR-FOR-ODIN.tar
My rom is stock 4.1.2 and using cwm 6.0.1.5 but i can't flash anything include CWM 6.0.4.7 i back recovery and flash CWM 6.0.4.7 but it's error help please
Sent from my GT-i9100 by Tapatalk Pro ♠
6.0.4.8 is already out
Regards
Hello,
I have a Samsung Galaxy S2 GT-I9100p with CM12.1-20151023-NIGHTLY-i9100
I was recently on CM11 with CWM 6.0.4.3 recovery and everything worked as it should but since upgrading to CM12.1 I have been unable to boot in CWM recovery, it just takes me into the stock recovery. I've tried reflashing the CWM img but it has no effect.
Is this version of CWM not compatible with Lollipop? Can anyone tell me a version that will work?
I would also like to try TWRP but unsure which image to use, can anyone recommend one?
Thanks
Steven
caned_monkey said:
Hello,
I have a Samsung Galaxy S2 GT-I9100p with CM12.1-20151023-NIGHTLY-i9100
I was recently on CM11 with CWM 6.0.4.3 recovery and everything worked as it should but since upgrading to CM12.1 I have been unable to boot in CWM recovery, it just takes me into the stock recovery. I've tried reflashing the CWM img but it has no effect.
Is this version of CWM not compatible with Lollipop? Can anyone tell me a version that will work?
I would also like to try TWRP but unsure which image to use, can anyone recommend one?
Thanks
Steven
Click to expand...
Click to collapse
The recovery is bundled with the kernel in the S2. CM12.1 has CM recovery by default. The only way you can have a different recovery is to flash a compatible custom kernel. You could try the TWRP kernel from at the beginning of the CM12.1 thread or Dorimanx kernel that gsstudios builds
Thanks, where is the CM12.1 thread, I'm not sure which one you're referring to?
caned_monkey said:
Thanks, where is the CM12.1 thread, I'm not sure which one you're referring to?
Click to expand...
Click to collapse
This one. Under "Important information" in the first post there is a link
Thank you! Problem solved, very quick and easy to install