Here's the New OG1 full tar for sprint. This is only usable in odin.
Flash at your own risk.
http://1drv.ms/1W5isnX
Unzip file and place the file in the ap slot of Odin.
Sprint GS5 Moars 6.2
Robalboa said:
Here's the New OG1 full tar for sprint. This is only usable in odin.
Flash at your own risk.
http://1drv.ms/1W5isnX
Unzip file and place the file in the ap slot of Odin.
Sprint GS5 Moars 6.2
Click to expand...
Click to collapse
Any details on the new update?
Sent from my SM-G900P using XDA Free mobile app
Son Rise said:
Any details on the new update?
Sent from my SM-G900P using XDA Free mobile app
Click to expand...
Click to collapse
Its for the Stagefright fix. I know that was the reason for this update idk about anything else at the moment.
Sent from my SM-G900P using XDA Free mobile app
Just did the install over OA6. It worked out with no problems and rooted via TWRP. Just remember to power down before running Odin or you won't get the full update. Thanks for posting the file.
Flashed in Odin over OA6 stock deodexed (didn't wipe). Works fine, didn't have to reinstall any apps. Rooted through TWRP with no trouble.
joshdv said:
Flashed in Odin over OA6 stock deodexed (didn't wipe). Works fine, didn't have to reinstall any apps. Rooted through TWRP with no trouble.
Click to expand...
Click to collapse
Quick question. How are you rooting with twrp? I don't see the option to root
Sprint GS5 Moars 6.2
Robalboa said:
Quick question. How are you rooting with twrp? I don't see the option to root
Sprint GS5 Moars 6.2
Click to expand...
Click to collapse
I flashed TWRP then booted into recovery. Then I went to reboot and it pointed out I didn't have root and offered to root and install SuperSU. I accepted.
Has anyone flashed this over the OD3 De-odexed version?
Will it matter if you Odin the Stock Odexed over a De-odexed firmware?
Robalboa said:
Quick question. How are you rooting with twrp? I don't see the option to root
Sprint GS5 Moars 6.2
Click to expand...
Click to collapse
There isn't one that I know of. If you tell TWRP to reboot the system, it will ask you if you want to root the phone if it detects that it isn't currently rooted.
You would need to install busybox separately from the play store.
Does_It_Matter said:
Has anyone flashed this over the OD3 De-odexed version?
Will it matter if you Odin the Stock Odexed over a De-odexed firmware?
Click to expand...
Click to collapse
This did not work.
I did an Odin of OG1 over OD3
Most seemed to be good but broke Data and Wifi/Internet
Even tried doing a factory reset and activation and wifi/internet would not work
Had a TWRP backup so I restored that
Odd thing is I'm on OD3 with the OG1 modem and everything seems to be fine -- go figure
I'll wait until I hear more results from other people or maybe a newer revision - OD3 is working fine for me
Does_It_Matter said:
This did not work.
I did an Odin of OG1 over OD3
Most seemed to be good but broke Data and Wifi/Internet
Even tried doing a factory reset and activation and wifi/internet would not work
Had a TWRP backup so I restored that
Odd thing is I'm on OD3 with the OG1 modem and everything seems to be fine -- go figure
I'll wait until I hear more results from other people or maybe a newer revision - OD3 is working fine for me
Click to expand...
Click to collapse
You have to enter download mode from a powered off state. Pull the battery, put it back in, and then flash. Otherwise you will have modem issues (wifi/internet).
joshdv said:
You have to enter download mode from a powered off state. Pull the battery, put it back in, and then flash. Otherwise you will have modem issues (wifi/internet).
Click to expand...
Click to collapse
I did.
Powered off, pulled the battery, did the Odin of OG1 over the OD3 De-odexed
Rebooted - let the rom do its bootup thing, no internet, no data
Even did a full phone reset - no wifi/data - weird.
TWRP restored my OD3 backup and phone is back and working - the odd thing is that the internet/data
is working fine now with OD3 and OG1 modem
Robalboa said:
Here's the New OG1 full tar for sprint. This is only usable in odin.
Flash at your own risk.
http://1drv.ms/1W5isnX
Unzip file and place the file in the ap slot of Odin.
Sprint GS5 Moars 6.2
Click to expand...
Click to collapse
Can you verify what ROM work with this update...seeing that MOARS seems to be specific for O6A (or above?)...currently stuck on OF6...lol
1range said:
Can you verify what ROM work with this update...seeing that MOARS seems to be specific for O6A (or above?)...currently stuck on OF6...lol
Click to expand...
Click to collapse
Ok if your on of6 you can still run Moars.
And you can also with this rom. I'll post instructions when I get home about 2 hours. You have to flash twrp.img in odin
After flashing this. But you can't reboot during the 2 flashes. Must odin both from a powered off state both times. After flashing twrp. Img power off the phone by pulling battery. Boot into twrp recovery. Then from in recovery hit reboot. And it will ask if you'd like to root the phone you choose yes.
Then upon reboot you'll be Rooted. Next download Moars. Zip and flash Moars in your twrp (custom recovery). Tada
I'll get you the files if you can't find them when I get home.
Sprint GS5 Moars 6.2
Does_It_Matter said:
I did.
Powered off, pulled the battery, did the Odin of OG1 over the OD3 De-odexed
Rebooted - let the rom do its bootup thing, no internet, no data
Even did a full phone reset - no wifi/data - weird.
TWRP restored my OD3 backup and phone is back and working - the odd thing is that the internet/data
is working fine now with OD3 and OG1 modem
Click to expand...
Click to collapse
Try wiping internal before the odin flash make sure auto reboot and reset time are unchecked in odin. Or you possibly have a bad download.
Sprint GS5 Moars 6.2
Robalboa said:
Ok if your on of6 you can still run Moars.
And you can also with this rom. I'll post instructions when I get home about 2 hours. You have to flash twrp.img in odin
After flashing this. But you can't reboot during the 2 flashes. Must odin both from a powered off state both times. After flashing twrp. Img power off the phone by pulling battery. Boot into twrp recovery. Then from in recovery hit reboot. And it will ask if you'd like to root the phone you choose yes.
Then upon reboot you'll be Rooted. Next download Moars. Zip and flash Moars in your twrp (custom recovery). Tada
I'll get you the files if you can't find them when I get home.
Sprint GS5 Moars 6.2
Click to expand...
Click to collapse
The download provided OG1 is firmware, right? I have TWRP installed already...I pretty much have it...beyond that
I'm a bit of a newb to this, so can somone help me please? My objective right now is to get root on my S5 G900P, I dont care if i can get root only or have to flash a custom rom to make this happen, I'm currently on a stock OD3. I have tried to use chainfire to root my device but it fails, I just tried to load twrp-klte into it, it fails also. Can i load this firmware on my OD3 and try to root it via TWRP like others have said? Thanks
Rooted and booted.. Stock rom.. ??
1range said:
The download provided OG1 is firmware, right? I have TWRP installed already...I pretty much have it...beyond that
Click to expand...
Click to collapse
og1 FULL ROM
here the links to Odin 310.6 (thanks to tdunham for the files)
twrp.img are the 2 files
https://www.androidfilehost.com/?w=files&flid=15340
odin this( rom AP slot) from a battery pulled powered off stat
make sure auto reboot and reset time is unchecked in odin
when the screen says pass Dont reboot.
unplug it and pull the battery and put it back in download mode manually
the flash twrp.img file in odin also ap slot (again make sure auto reboot and reset time are unchecked in odin
when it says pass. reboot directly to your custom recovery you just flashed.
hit the reboot button once recovery opens at that point it will alert you that you aren't rooted and would you like to obtain root. say yes. and it will reboot( Rooted with custom recovery). from that point you can flash moars through recovery or what ever custom rom you'd like.
Interesting looks like firmware...i.e. OD3, OA6, OF6, and now OG1 which are firmware in contrast to MOAR... which is considered a ROM...meanwhile thanks for your assistance...waiting for MOAR to boot
Related
Downloading the update right now!
What's the software version under "About Device" in Settings?
here it is
Awesome
You can find the information on Sprint's website
http://support.sprint.com/support/a...ndUpdateTheSoftwareVersionOnYourSamsungGalaxy
kareem91 said:
Downloading the update right now!
Click to expand...
Click to collapse
What city/state are you in?
Sent from my SM-N900P using Tapatalk 2
Got my update when I was getting ready for work this morning ( 5:30 AM in Elizabethtown Kentucky).
does the FM radio work?
Anyone try cf auto root yet?
Sent from my SM-N900P using XDA Free mobile app
Whats the easiest way to receive the ota if running a rooted custom rom? Debating whether or not to go back to stock. Thanks
Sent from my SM-N900P using XDA Free mobile app
Download the NK4 tar here and use Odin to return to stock. Once on stock keep checking for software updates until you get it.
http://forum.xda-developers.com/showthread.php?t=2522638
bowhunt2005 said:
Whats the easiest way to receive the ota if running a rooted custom rom? Debating whether or not to go back to stock. Thanks
Sent from my SM-N900P using XDA Free mobile app
Click to expand...
Click to collapse
karmak said:
Download the NK4 tar here and use Odin to return to stock. Once on stock keep checking for software updates until you get it.
http://forum.xda-developers.com/showthread.php?t=2522638
Click to expand...
Click to collapse
I Odin back to stock yesterday and it tells me I can't get the update because I'm running a modified phone and to use kies
twisteddroid said:
I Odin back to stock yesterday and it tells me I can't get the update because I'm running a modified phone and to use kies
Click to expand...
Click to collapse
For whatever reason, I had to Odin twice to go back to stock.
Here is what I did:
1. Boot into recovery, wipe everything
2. Odin file, don't check automatic reboot
3. Once its done, pull battery, boot into stock recover, do factory reset
4. Reboot into download mode
5. Odin file again
This is exactly what I did and I received the update.
Edit - I used the original NAB image which was 4.4.2. It then automatically let me update via Sprint to 4.4.4, and then to 5.0
When using Odin, always make sure to power down your phone completely and then press and hold volume down, home and power at the same time. Then press volume up to confirm download mode.
lazerus06 said:
For whatever reason, I had to Odin twice to go back to stock.
Here is what I did:
1. Boot into recovery, wipe everything
2. Odin file, don't check automatic reboot
3. Once its done, pull battery, boot into stock recover, do factory reset
4. Reboot into download mode
5. Odin file again
This is exactly what I did and I received the update.
Edit - I used the original NAB image which was 4.4.2. It then automatically let me update via Sprint to 4.4.4, and then to 5.0
Click to expand...
Click to collapse
I actually had to Odin 5 times before it would boot the last time I went into recovery and wipe data and factory reset the Odin nk4 tar. It finally booted but still says system status custom so when I check for updates its a no go.
I was running rooted SPRINT KK 4.4.4 N900PVPUDNK4 and now I'm on Lollipop w/ root and TWRP 2.8.6.1 (4.4.4 version) recovery. My steps:
1. Odin'd stock NK4 tar using Odin3 v3.09 in the AP slot (kept Auto Reboot & F. Reset Time checked).
2. Let phone reboot. Skipped all the setups.
3. Powered down phone than booted into stock recovery to perform a factory reset.
4. Once phone rebooted I went to 'System Updates' and let the OTA do its thing. Phone rebooted.
5. Powered down phone and rebooted into bootloader (everything showed official)
6. Odin'd TWRP using Odin3 v3.09 in the AP slot (UNCHECKED Auto Reboot & F. Time checked).
7. Pulled battery and rebooted into recovery (TWRP).
8. Flashed Chainfire's UPDATE-SuperSU-v2.46 and rebooted.
9. Successfully rooted.
Is there a way to download the update and just flash it in stock recovery?
pl share Lollipop 5.0 odin flashable file for Sprint Note 3 ...
javed91214 said:
pl share odin flashable file for Sprint Note 3 ...
Click to expand...
Click to collapse
I used the NK4 one mirrored here: http://forum.xda-developers.com/showpost.php?p=47355107&postcount=1
runner77 said:
I used the NK4 one mirrored here: http://forum.xda-developers.com/showpost.php?p=47355107&postcount=1
Click to expand...
Click to collapse
thnks , but i already have NK4 . looking for lollipop 5.0 tar file.
ok I odin back to stock NH7...
took the ota to NK4...
then took ota to OC5..
everything is cool but a few questions...
Does cf auto root work on OC5 I didnt see the file on his site?
Which recovery works best CWM Philz or TWRP ? and im sure i need a lolipop compatible one?
Waanum xposed for 5.0 ready yet?
Root, debloat, and enable wifi hotspot are usually my main goals...
Definitely looking for a Lolipop hotspot Mod?
Is it just me or does the notification panel have to be touched at the top to be dragged down? ( All previous builds I could set a gesture swipe down to bring down notifications.
I mean it doesnt work on NOVA or Lightning Launcher?
So cf auto root for oc5 yes,for recovery I'm using twrp 2.8.6.1 and is working just fine,and so for right now exposed is not working on samsung based roms but if you have an aosp rom even if it is for samsung it may work and for free wifi hot spot you can use galaxy tools(idoneapps) i don't remember about notification panel since I'm on darklord rom.
hmmmm. Which CF tar did you use?
ttkyles said:
hmmmm. Which CF tar did you use?
Click to expand...
Click to collapse
Go here:http://forum.xda-developers.com/showthread.php?t=2522638 and grab nk4 tar.
1. Odin'd stock NK4 tar using Odin3 v3.09 in the AP slot (kept Auto Reboot & F. Reset Time checked).
2. Let phone reboot. Skipped all the setups.
3. Powered down phone than booted into stock recovery to perform a factory reset.
4. Once phone rebooted I went to 'System Updates' and let the OTA do its thing. Phone rebooted.
5. Powered down phone and rebooted into bootloader (everything showed official)
6. Odin'd TWRP using Odin3 v3.09 in the AP slot (UNCHECKED Auto Reboot & F. Time checked).*
7. Pulled battery and rebooted into recovery (TWRP).
8. Flashed Chainfire's UPDATE-SuperSU-v2.46 and rebooted.
9. Successfully rooted.
This isn't my instructions. I'm just copying and pasting from the general section.
http://autoroot.chainfire.eu/ here you go look for ms-900p it will say nh7 4.4.4 but you can use it to root your sprint note 3 on 5.0 oc5!!!
TWRP 2.8.0.0 works great. I Odin'ed: openrecovery-twrp-2.8.0.0-hltespr-4.4.img.tar
Native hotspot mod works on stock ROM without root. http://forum.xda-developers.com/showthread.php?t=2796994
Xposed framework will take time for Samsung devices. Check for updates at http://forum.xda-developers.com/showthread.php?t=3034811
You don't need cf auto root. Flash your recovery. I'm still using philz not a single issue. Then flash supersu zip and reboot that's it.
Sent from my 0x1 Note 3...... I love tep
mrnamster said:
TWRP 2.8.0.0 works great. I Odin'ed: openrecovery-twrp-2.8.0.0-hltespr-4.4.img.tar
Native hotspot mod works on stock ROM without root. http://forum.xda-developers.com/showthread.php?t=2796994
Xposed framework will take time for Samsung devices. Check for updates at http://forum.xda-developers.com/showthread.php?t=3034811
Click to expand...
Click to collapse
How did you get your MSL? The tool linked in that thread isn't working on my device.
EDIT: Solved. Just called Sprint and asked for the MSL. Gave it to me with no hassle.
figured I'd send the end result pic ?
Galaxy Tools did the hotspot for me ?
ohhh ad away is a must
dueces on that root check (with no ads
root 1st and foremost apks
rogerandgina said:
Go here:http://forum.xda-developers.com/showthread.php?t=2522638 and grab nk4 tar.
1. Odin'd stock NK4 tar using Odin3 v3.09 in the AP slot (kept Auto Reboot & F. Reset Time checked).
2. Let phone reboot. Skipped all the setups.
3. Powered down phone than booted into stock recovery to perform a factory reset.
4. Once phone rebooted I went to 'System Updates' and let the OTA do its thing. Phone rebooted.
5. Powered down phone and rebooted into bootloader (everything showed official)
6. Odin'd TWRP using Odin3 v3.09 in the AP slot (UNCHECKED Auto Reboot & F. Time checked).*
7. Pulled battery and rebooted into recovery (TWRP).
8. Flashed Chainfire's UPDATE-SuperSU-v2.46 and rebooted.
9. Successfully rooted.
This isn't my instructions. I'm just copying and pasting from the general section.
Click to expand...
Click to collapse
These cut and paste directions worked to the T....
thanks so much...
I didnt even go back to NK4. ..
I just cf auto rooted from OC5
odin twrp...
flashed su..
freaking awesome...
thanks for the help
hmmmmm is there an 'sd card fix'
for our n900p lolipop?
nevermind...
folder mount root accomplished the task
Are there any ROMs for oc5 yet? Isee Lollipop ROMs, but they seem to be "ports" or use nh/nk. I have tecently updated and would love to flash a ROM. Does anyone know which of the current 5.0 ROMs are compatible with oc5?
GAPO said:
Are there any ROMs for oc5 yet? Isee Lollipop ROMs, but they seem to be "ports" or use nh/nk. I have tecently updated and would love to flash a ROM. Does anyone know which of the current 5.0 ROMs are compatible with oc5?
Click to expand...
Click to collapse
No tar file availableb yet for OC5 to use as source so no
Sent from my SM-N910P using Tapatalk 2
Having trouble doing this again
rpenrod23 said:
No tar file availableb yet for OC5 to use as source so no
Sent from my SM-N910P using Tapatalk 2
Click to expand...
Click to collapse
I did an ODIN with NK4 and NH7 but the software version still reads OC5?? I do not get it as I looked in build.prop to see if that was where it pulls it from. If I go into settings about....SOFTWARE VERSION reads N900PVPUEOC5??? How is this possible if I did a factory reset and did a ODIN with both NK4 tar and then tried NH7 tar?? I cannot seem to get the OTA again since the system seems to think I have OC5......HELP PLZ!:crying:
photolarry said:
I did an ODIN with NK4 and NH7 but the software version still reads OC5?? I do not get it as I looked in build.prop to see if that was where it pulls it from. If I go into settings about....SOFTWARE VERSION reads N900PVPUEOC5??? How is this possible if I did a factory reset and did a ODIN with both NK4 tar and then tried NH7 tar?? I cannot seem to get the OTA again since the system seems to think I have OC5......HELP PLZ!:crying:
Click to expand...
Click to collapse
Once you Odin the tar, immediately reboot into stock recovery and perform a factory reset and THEN boot into your OS
Sent from my SM-N910P using Tapatalk 2
I just got myself a note 3 for sprint, and it had the OC5 Lollipop update on it. I flashed CF-Auto-Root on it, and it booted up fine. Used it for a bit, and then I tried putting TWRP on to flash Xposed Framework. TWRP flashed fine, and worked fine, but now the phone will not boot into the stock rooted rom. I have tried flashing the factory image again, that didn't fix it. Even tried flashing a kitkat factory image, and that didn't work either. The only way i can get the phone to boot into the OS is if i run a custom kitkat rom, and then everything seems to work fine. So where can i go from here to get the factory lollipop rooted with a custom recovery working?
tellem24 said:
I just got myself a note 3 for sprint, and it had the OC5 Lollipop update on it. I flashed CF-Auto-Root on it, and it booted up fine. Used it for a bit, and then I tried putting TWRP on to flash Xposed Framework. TWRP flashed fine, and worked fine, but now the phone will not boot into the stock rooted rom. I have tried flashing the factory image again, that didn't fix it. Even tried flashing a kitkat factory image, and that didn't work either. The only way i can get the phone to boot into the OS is if i run a custom kitkat rom, and then everything seems to work fine. So where can i go from here to get the factory lollipop rooted with a custom recovery working?
Click to expand...
Click to collapse
I'd say go back to NK4 and then accept the update to OC5 and root.
You'll need these files, please thank the OPs of the threads.
NK4 tar from [Odin] Mirrors for Official Samsung Tars for MJ4, NAB, NC5, NH7 & NK4
twrp-2.8.6.1-hltespr-4.4.img.tar from TWRP hltespr page
UPDATE-SuperSU-v2.46.zip from [STABLE][2015.02.13] SuperSU v2.46
Copy SuperSU zip file to your sdcard.
boot to recovery and factory reset, wipe partition cache and dalvik cache.
Then power the phone off from recovery.
Boot to download mode Volume Down + Home + Power ... then Volume Up.
(from the OFF state, booting into download mode from a ROM or recovery never works correctly when using odin)
Using Odin 3.09 flash NK4 tar, let it reboot, it will take it a while to start the first time.
when the phone restarts, unplug the usb cable.
you can skip all the setup stuff and then get the ota to get back to OC5; Settings, System Update, Firmware Update
once ota is completely done, power the phone off
go into download mode
odin the twrp tar (uncheck everything in odin)
once odin says pass unplug the usb cable and press Volume Up + Home + Power until the phone vibrates and you see the blue writing - this will get you into recovery w/o having to pull the battery.
flash the SuperSU zip file.
reboot to system, you should be on OC5 stock rooted.
jdelano said:
I'd say go back to NK4 and then accept the update to OC5 and root.
You'll need these files, please thank the OPs of the threads.
NK4 tar from [Odin] Mirrors for Official Samsung Tars for MJ4, NAB, NC5, NH7 & NK4
twrp-2.8.6.1-hltespr-4.4.img.tar from TWRP hltespr page
UPDATE-SuperSU-v2.46.zip from [STABLE][2015.02.13] SuperSU v2.46
Copy SuperSU zip file to your sdcard.
boot to recovery and factory reset, wipe partition cache and dalvik cache.
Then power the phone off from recovery.
Boot to download mode Volume Down + Home + Power ... then Volume Up.
(from the OFF state, booting into download mode from a ROM or recovery never works correctly when using odin)
Using Odin 3.09 flash NK4 tar, let it reboot, it will take it a while to start the first time.
when the phone restarts, unplug the usb cable.
you can skip all the setup stuff and then get the ota to get back to OC5; Settings, System Update, Firmware Update
once ota is completely done, power the phone off
go into download mode
odin the twrp tar (uncheck everything in odin)
once odin says pass unplug the usb cable and press Volume Up + Home + Power until the phone vibrates and you see the blue writing - this will get you into recovery w/o having to pull the battery.
flash the SuperSU zip file.
reboot to system, you should be on OC5 stock rooted.
Click to expand...
Click to collapse
Thanks! I actually got it working before i saw this by flashing the TWRP backup that someone posted on here, but i may try doing this to see if i can get xposed working with it, because it still isn't for me.
Not working
Everything working for me except when I flash twrp, it says pass, then comes to "android" recovery screen, so I can flash susuperuser
tellem24 said:
Thanks! I actually got it working before i saw this by flashing the TWRP backup that someone posted on here, but i may try doing this to see if i can get xposed working with it, because it still isn't for me.
Click to expand...
Click to collapse
Won't happen. It's all over xposed doesn't work on lollipop tw. Just search.
Sent from my 0x1 Note 3...... I love tep
Cybed said:
Everything working for me except when I flash twrp, it says pass, then comes to "android" recovery screen, so I can flash susuperuser
Click to expand...
Click to collapse
Try wiping data
Sent from my SM-N900P using XDA Free mobile app
kaos420 said:
Won't happen. It's all over xposed doesn't work on lollipop tw. Just search.
Sent from my 0x1 Note 3...... I love tep
Click to expand...
Click to collapse
Xposed will not work on 5.0 so don't try.... that is why you got a boot loop
jlechner said:
Try wiping data
Sent from my SM-N900P using XDA Free mobile app
Click to expand...
Click to collapse
Working now Tks
Chaz187 said:
Xposed will not work on 5.0 so don't try.... that is why you got a boot loop
Click to expand...
Click to collapse
did you mean to quote me? i know it wont work silly . i was telling him that.
kaos420 said:
did you mean to quote me? i know it wont work silly . i was telling him that.
Click to expand...
Click to collapse
Sorry quoted by accident
Chaz187 said:
Sorry quoted by accident
Click to expand...
Click to collapse
i forgive you but only when you drop a new rom lol
kaos420 said:
i forgive you but only when you drop a new rom lol
Click to expand...
Click to collapse
As soon as we get the base rom built it will come!!!!
just thought id put this up since i haven't seen it posted.
this is the full OD3 stock Rom tar.MD5 file
it is odin Flashable.
I will warn you alot of people are saying once they upgraded to this bootloader they couldnt get OA6 roms to flash so beware.
any download mirrors would be appreciated
Here is another link but this one you have to unzip then use Odin to flash the tar file inside thanks
http://forum.xda-developers.com/showthread.php?p=61215093
download
use odin 3.10.6 but i believe 3.10.0 will work also
put the file in the AP slot and flash
you will most likely lose root but here it is any way
https://onedrive.live.com/redir?resid=cd08ce789eb6b040!141
It should be noted that if anyone flashes this firmware they will NOT be able to flash back to a previous firmware.
i will also note that some people could gain root with chainfire and flash custom recovery through odin then restore backups of OA6 but again beware
http://forum.xda-developers.com/showpost.php?p=60960196&postcount=19
Robalboa said:
i will also note that some people could gain root with chainfire and flash custom recovery through odin then restore backups of OA6 but again beware
http://forum.xda-developers.com/showpost.php?p=60960196&postcount=19
Click to expand...
Click to collapse
Wasn't sure about chainfire's root method on this version since I'm not running it, so hopefully it still works. @Ramer has uploaded this as well to a file hosting site so if he doesn't see this, ask him for a link for his download link so you can add a mirror site to the OP as an alternate if you like.
tdunham said:
Wasn't sure about chainfire's root method on this version since I'm not running it, so hopefully it still works. @Ramer has uploaded this as well to a file hosting site so if he doesn't see this, ask him for a link for his download link so you can add a mirror site to the OP as an alternate if you like.
Click to expand...
Click to collapse
Here the file I put up on AFH: https://www.androidfilehost.com/?fid=23991606952615017
I have to question the title of this thread though. This is NOT flashable in recovery. It's the zip file that must be unzipped on a PC and then Odin the tar file. It's the original one from Sammobile.
The OP gives correct instructions, I just think the word flashable is bound to confuse someone.
Ramer said:
Here the file I put up on AFH: https://www.androidfilehost.com/?fid=23991606952615017
I have to question the title of this thread though. This is NOT flashable in recovery. It's the zip file that must be unzipped on a PC and then Odin the tar file. It's the original one from Sammobile.
The OP gives correct instructions, I just think the word flashable is bound to confuse someone.
Click to expand...
Click to collapse
thanks for the mirror it says right in the OP "Odin" flashable
also in the instructions it says to open odin use the ap slot etc
plus if anyone tried to recovery flash it would just fail, no damage done
thanks
Robalboa said:
thanks for the mirror it says right in the OP "Odin" flashable
also in the instructions it says to open odin use the ap slot etc
plus if anyone tried to recovery flash it would just fail, no damage done
thanks
Click to expand...
Click to collapse
You are correct. It's probably just my hesitation to using the word flashable and odin at the same time. I've lost count of how many users see a zip and think "I'll flash this"
Tried this and I still show BOA6 software and baseband ? Also after I installed it on odin I didnt like it much so I was able to flash MOAR after I flashed OD3. weird
Can we please get screenshoots??
Sent from my SM-G900P using XDA Free mobile app
Already installed MOAR 6.2 .
Son Rise said:
Can we please get screenshoots??
Sent from my SM-G900P using XDA Free mobile app
Click to expand...
Click to collapse
Looks exactly like BOA6. They just added some extra security features like activation lock to the security settings.
Sent from my SM-G900P using xda premium
Son Rise said:
Can we please get screenshoots??
Sent from my SM-G900P using XDA Free mobile app
Click to expand...
Click to collapse
its pure stock OD3 . virtually the same as Oa6 with a few slight changes
philiptibbs said:
Tried this and I still show BOA6 software and baseband ? Also after I installed it on odin I didnt like it much so I was able to flash MOAR after I flashed OD3. weird
Click to expand...
Click to collapse
Pull your battery out. wait a few seconds. put battery back and boot into odin/download mode. vol down+home+power
then odin the tar
it will work
Had the same problem, wasn't able to flash back to BOA6 using odin had to flash OD3 to get the phone back and running
not sure about rooting, but my hotspot is still enabled from previous root that i loss when updating to OD3
You can still flash OA6 roms as.long.as.you have a custom recovery and.root
Sprint GS5 Moars 6.2
link is dead?
Try the first link
Sprint GS5 Moars 6.2
Is there a root method for this? chainfire didn't work for me and it wont let me install TWRP? keep saying fail
thanks in advance
eric303 said:
Is there a root method for this? chainfire didn't work for me and it wont let me install TWRP? keep saying fail
thanks in advance
Click to expand...
Click to collapse
Yes. Once flashed don't reboot. Pull the battery and go back into download mode and flash twrp. Img in the ap slot
You can find the file at Moars op under recovery and odin
After you flash the custom recovery image pull battery boot into recovery from recovery hit reboot. It will then prompt you that there's no root and would you like to root. Choose yes. Tada
Sprint GS5 Moars 6.2
I did as instructed, but the TWRP that i loaded did not ask for a root option, it did some updates, then it automatically reboots the phone, I pull the battery, then reboot it back into recovery again, and reboot it back into recovery from the recovery screen, it ask me to install super user, i say yes, then reboot back into system now it has a icon that says Superuser installer, I click on it and choose TWRP, gives me error
Hey everyone!
Here is the promised almost 100% stock deodexed ROM. This build differs from the odexed build in that it is now deodexed, comes pre-rooted and deKnoxed.
This is a stand-alone ROM that can also be used as a base by anyone that would like to use it for their own ROM.
REQUIREMENTS:You MUST be on a Lollipop bootloader in order for this ROM to work. I recommend flashing the OG1 Stock TAR and then Philz Recovery through Odin prior to flashing the ROM.
ROM FLASHING:- Boot to your custom recovery (recommended recovery is Philz Touch v6.41.6).
- Wipe Cache.
- Wipe Dalvik Cache.
- Wipe System and Data (Under "Wipe Data/Factory Reset" and then "Clean to Install a New ROM" in Philz Touch).
- Flash ROM!
- Enjoy!
*Please remember that Lollipop and Deodexed ROM's don't like to play nice with each other and require some time to get acquainted before the ROM will boot. It is not uncommon for the first boot to take between 10 and 20 minutes!
As a side-note I would strongly recommend flashing Tdunham's Debloat tool before running the ROM for the first time. It comes with a TON of bloat (thank you Sprint and Samsung!). You can get the Debloat tool in the attachments on this post: http://forum.xda-developers.com/spr...ent/stock-rom-od3-android-l-deodexed-t3128908
CHANGELOG:OG1 Stock Rooted Deodexed v1.1 (Released 11/18/15)
- Changed root method to be consistent with changes in my Mostly Stock OG1 ROM
OG1 Stock Rooted Deodexed v1.0 - Initial Release (Released 10/15/15)
- Deodexed ROM
- Added Root
- Removed Knox
DOWNLOADS: Deodexed OG1 ROM
OG1 Stock Restore TAR
Philz Touch Recovery v6.41.6
Enjoy!
XDA:DevDB Information
SM-G900P OG1 Stock Rooted Deodexed ROM, ROM for the Sprint Samsung Galaxy S 5
Contributors
rwilco12
ROM OS Version: 5.0.x Lollipop
Version Information
Status: Stable
Current Stable Version: 1.0
Stable Release Date: 2015-10-15
Created 2015-10-15
Last Updated 2015-10-15
Yeah, I'm first
I'm first!!! First time ever!!! Downloading now.
Thanks
This looks interesting, I'm going to check it out.
Sent from my Galaxy s5, using Tapatalk
Thanks again @rwilco12 for another great contribution to the community!
Failing root check
First off, rwilco you are awesome! Thanks so much.
I flashed stock tar, then odined philz recovery and then installed your rom.
Everything runs great but i cant pass root checker. Also tktanium backup wont load because it gets stuck on the verifying supersu and busynox screen. Plz help
KueDAWG said:
First off, rwilco you are awesome! Thanks so much.
I flashed stock tar, then odined philz recovery and then installed your rom.
Everything runs great but i cant pass root checker. Also tktanium backup wont load because it gets stuck on the verifying supersu and busynox screen. Plz help
Click to expand...
Click to collapse
I'm not sure why it does that sometimes but when it does your can either dirty flash the ROM or flash SuperSU. That'll get you back on track. Sorry!
Where does on get a flashable supersu package for og1? All i have is the odin version and that root isnt sticking either
KueDAWG said:
First off, rwilco you are awesome! Thanks so much.
I flashed stock tar, then odined philz recovery and then installed your rom.
Everything runs great but i cant pass root checker. Also tktanium backup wont load because it gets stuck on the verifying supersu and busynox screen. Plz help
Click to expand...
Click to collapse
Which slot do you put the stock tar in on odin?never ming got it...PDA.ha-ha....the new odin3 v3.10.7 only has slots BL. AP. CP. CSC. ????
@rwilco12 after odin everything still says oa6 ,not og1
I odin og1 once booted,it was optimizing apps,i didnt let finish.pulled battery on odin recovery,flashed rom
KueDAWG said:
Where does on get a flashable supersu package for og1? All i have is the odin version and that root isnt sticking either
Click to expand...
Click to collapse
Flash this in recovery and you'll be good to go. It's Chainfire's SuperSU installer.
http://download.chainfire.eu/supersu
mholloway said:
@rwilco12 after odin everything still says oa6 ,not og1
I odin og1 once booted,it was optimizing apps,i didnt let finish.pulled battery on odin recovery,flashed rom
Click to expand...
Click to collapse
To have the Odin flash of the stock TAR stick you need to boot to download mode from a complete powered off state. Once you have booted into OG1 then you shut down completely and then boot to download mode again to flash a custom recovery. Once you've done that you can flash the ZIP of this deodexed ROM.
rwilco12 said:
To have the Odin flash of the stock TAR stick you need to boot to download mode from a complete powered off state. Once you have booted into OG1 then you shut down completely and then boot to download mode again to flash a custom recovery. Once you've done that you can flash the ZIP of this deodexed ROM.
Click to expand...
Click to collapse
OK cool thank you,will try.
rwilco12 said:
To have the Odin flash of the stock TAR stick you need to boot to download mode from a complete powered off state. Once you have booted into OG1 then you shut down completely and then boot to download mode again to flash a custom recovery. Once you've done that you can flash the ZIP of this deodexed ROM.
Click to expand...
Click to collapse
Firmware worked but now no recovery will install.none.just keep getting fail.
mholloway said:
Firmware worked but now no recovery will install.none.just keep getting fail.
Click to expand...
Click to collapse
What recovery are you attempting to flash? You should be able to flash a TAR version of the recovery via the PDA slot in Odin. The key is booting to Download mode from a completely powered off state.
rwilco12 said:
What recovery are you attempting to flash? You should be able to flash a TAR version of the recovery via the PDA slot in Odin. The key is booting to Download mode from a completely powered off state.
Click to expand...
Click to collapse
Philz touch or twrp.either will flash,sometimes philz will just hang..iam stumped,i only get failed.
@rwilco12, any chance of making a rooted stock odin flashable rom?
hi
@rwilco12 can you teach me compare different "[ROM][ZIP] Rwilco12's Mostly Stock OG1 v 1.0"
before i've unlock sim :"invalid sim card".then i unlock.i wondering after up this rom,i've unlock again?i fear againt unlock.thanks
my phone SM-G900P
mholloway said:
Philz touch or twrp.either will flash,sometimes philz will just hang..iam stumped,i only get failed.
Click to expand...
Click to collapse
Shut your phone down, boot to download mode, plug in USB and flash this Philz Touch 6.41.6 One-Click I created. If that doesn't get you a recovery we'll go back to the drawing board.
mholloway said:
@rwilco12, any chance of making a rooted stock odin flashable rom?
Click to expand...
Click to collapse
I wish. Unfortunately Samsung changed a lot of things with the introduction of Knox and although we can make them rooted, Knox somehow wipes root out after boot. Flashing a deKnoxed one-click with the new setup causes bootloops.
To make it more fun with the S6 Samsung made it so the tools we used to make the one-clicks no longer work period. We're seeing what we can do to work around everything but Samsung is making it much more difficult for us to do anything.
rwilco12 said:
Shut your phone down, boot to download mode, plug in USB and flash this Philz Touch 6.41.6 One-Click I created. If that doesn't get you a recovery we'll go back to the drawing board.
I wish. Unfortunately Samsung changed a lot of things with the introduction of Knox and although we can make them rooted, Knox somehow wipes root out after boot. Flashing a deKnoxed one-click with the new setup causes bootloops.
To make it more fun with the S6 Samsung made it so the tools we used to make the one-clicks no longer work period. We're seeing what we can do to work around everything but Samsung is making it much more difficult for us to do anything.
Click to expand...
Click to collapse
I already tried that,but i will try again after work.maybe the stock rom i downloaded was a bad download,after it booted it was like i dirty flashed over the existing rom.it didnt start phone with having to sign in.not sure if it is supposed too?
rwilco12 said:
Shut your phone down, boot to download mode, plug in USB and flash this Philz Touch 6.41.6 One-Click I created. If that doesn't get you a recovery we'll go back to the drawing board.
I wish. Unfortunately Samsung changed a lot of things with the introduction of Knox and although we can make them rooted, Knox somehow wipes root out after boot. Flashing a deKnoxed one-click with the new setup causes bootloops.
To make it more fun with the S6 Samsung made it so the tools we used to make the one-clicks no longer work period. We're seeing what we can do to work around everything but Samsung is making it much more difficult for us to do anything.
Click to expand...
Click to collapse
Ok @rwilco12 i tried the one click again at no prevail,i tried odin versions 307, 3-09 , and 3.10.7 ..trying philztouch 6.41.6 one click ,philztouch 6.26.2 , twrp 2.8.4.0 , twrp 2.8.5.0 , ktsoonez_twrp 04-06-2015-tar. Like i said iam stumped.never before had a problem flashing a recovery...????? Options please.lol