QI Charging - Verizon LG G3

Hi,
I purchased the qi sticker for my phone cover and it worked fine when I was on the stock rom.
When I upgraded to CM 12.1, it showed that it was charging, but did not charge. Now that I am on BlissPop, the same thing, charging light goes on and it does not charge.
Is this a ROM issue or a QI sticker issue? I did buy the sticker on eBay (not sure how good it is).
Any thoughts or input would help.
Thanks,

audiotech520 said:
Hi,
I purchased the qi sticker for my phone cover and it worked fine when I was on the stock rom.
When I upgraded to CM 12.1, it showed that it was charging, but did not charge. Now that I am on BlissPop, the same thing, charging light goes on and it does not charge.
Is this a ROM issue or a QI sticker issue? I did buy the sticker on eBay (not sure how good it is).
Any thoughts or input would help.
Thanks,
Click to expand...
Click to collapse
This is a known issue on AOSP-based ROMs. Stock will charge just fine.

Hi,
Are there any ROMs that would work with it such as Paranoid Android?

audiotech520 said:
Hi,
Are there any ROMs that would work with it such as Paranoid Android?
Click to expand...
Click to collapse
Nope, that is an AOSP-based ROM.

Outside of stock, are there any non AOSP roms that work?

So.... you want something that is not based on either stock or AOSP? Forget Qi charging, how would this ROM be created?

I was under the impression that qi charging works with 777jon's AOSP kernel? There is some comments saying that it does as long as you don't overclock. I am back on stock and unable to test right now. Give it a try if you'd like.
http://forum.xda-developers.com/lg-g3/development/kernel-777-kernel-t3003115

Hi,
Will I have to re-install the ROM and apps after I do this? I have never flashed a Kernel before.

audiotech520 said:
Hi,
Will I have to re-install the ROM and apps after I do this? I have never flashed a Kernel before.
Click to expand...
Click to collapse
Nothing is wiped when flashing a kernel. Just make a backup then flash the kernel.
Edit- If you're flashing the 777jon kernel to test QI charging with it, please report your results.

OK. I installed the kernel and still no qi. You mention over clocking. How do I make sure that it isn't over clocked out of the box? Are there any more steps I need to do?

audiotech520 said:
OK. I installed the kernel and still no qi. You mention over clocking. How do I make sure that it isn't over clocked out of the box? Are there any more steps I need to do?
Click to expand...
Click to collapse
Darn, I don't think it's overclocked out of the box but clock speeds are adjusted with Synapse app on that kernel.
https://play.google.com/store/apps/details?id=com.af.synapse&hl=en

Seems to be working here
http://forum.xda-developers.com/showpost.php?p=62473271&postcount=119

Qi charging is working on Paranoid Android rom.

Related

[Q] Snow Leopord's Stock Rom & MHL

Will Snow Leopards stock AT&T rom located in developers forum restore/provide MHL connection ability?
Edit: Sorry for mispelling your name Snow. It won't happen again.
alliance1975 said:
Will Snow Leopords stock AT&T rom located in developers forum restore/provide MHL connection ability?
Click to expand...
Click to collapse
which ROM does it not work for you with? Also the adaptor needs to be powered by micro usb , and the order that the cables get connected seems to matter. Connect to phone last, trial and error for other two.
adfurgerson said:
which ROM does it not work for you with? Also the adaptor needs to be powered by micro usb , and the order that the cables get connected seems to matter. Connect to phone last, trial and error for other two.
Click to expand...
Click to collapse
I'm on CM 11-20140104-NIGHTLY-e970
Monitor: ACER AL1917W (DVI connection)
Micro USB-DVI adapter: iKross MHL
Connecting LGOG last indicates no connection. I am certain LGOG is powering since screen remains on.
It is why I ask if returning to SnowLeopords stock rom will restore MHL.
alliance1975 said:
I'm on CM 11-20140104-NIGHTLY-e970
Monitor: ACER AL1917W (DVI connection)
Micro USB-DVI adapter: iKross MHL
Connecting LGOG last indicates no connection. I am certain LGOG is powering since screen remains on.
It is why I ask if returning to SnowLeopords stock rom will restore MHL.
Click to expand...
Click to collapse
You could likely even just use a different AOSP-base rom, no need to go all the way back to 4.1.
I know for a fact that Houstonn's 4.3 PA builds work with MHL, and I believe the official CM10.2 build also work.
alliance1975 said:
I'm on CM 11-20140104-NIGHTLY-e970
Monitor: ACER AL1917W (DVI connection)
Micro USB-DVI adapter: iKross MHL
Connecting LGOG last indicates no connection. I am certain LGOG is powering since screen remains on.
It is why I ask if returning to SnowLeopords stock rom will restore MHL.
Click to expand...
Click to collapse
I can confirm it is working on Beanstalk 4.4 also , using Samsung MHL that came with Infuse.
Do you know what kernel has MHL support for CyanogenMod?
XDFernando said:
Do you know what kernel has MHL support for CyanogenMod?
Click to expand...
Click to collapse
I installed the Beanstalk 4.4 rom which included the slimkat kernel. The mhl worked. I purchased a rocketfish adapter and plugged it into my hdmi tv and all seemed well. Unfortunately my LGOG started to get very hot. I reverted to my old CM 4.4 with cm kernel and heat problem solved but alas no mhl output.
alliance1975 said:
I installed the Beanstalk 4.4 rom which included the slimkat kernel. The mhl worked. I purchased a rocketfish adapter and plugged it into my hdmi tv and all seemed well. Unfortunately my LGOG started to get very hot. I reverted to my old CM 4.4 with cm kernel and heat problem solved but alas no mhl output.
Click to expand...
Click to collapse
i dont like overclocked kernels another good one with mhL?
XDFernando said:
i dont like overclocked kernels another good one with mhL?
Click to expand...
Click to collapse
I will be trying cm 10.2 shortly and let you know.
alliance1975 said:
I will be trying cm 10.2 shortly and let you know.
Click to expand...
Click to collapse
cm10.2 mhl works. Joy.
Edit: Recent developments suggest I was wrong regarding the 10.2 rom. I reinstalled it and it seems to be working fine. I cannot get my dvi monitor to work but my hdmi tv works great. So I must purchase an hdmi monitor in order to have my LGOG serve as my desktop PC.
My thanks to OMGMatrix for suggesting 10.2 as a solution.
@XDFernando, try the 10.2. I think you will find it easy to get along with.
CM11 now supports mhl
I upgraded from 10.2 to 11 last night and tried connecting to my hdtv and lo-an-behold it mirrored my LGOG, even rotated the view.
I have also not working
CM11 MHL Working
I'm pleased to announce that I have reached my goal of replacing my desktop computer with my LGOG. I use bluetooth mouse and keyboard and connect my LGOG to an $80 LED HDTV via MHL adapter. I was inspired by this blog http://www.livingdigitally.net/2012/02/using-a-mobile-device-as-a-desktop-computer.html. YouTube videos now play through MHL without a problem. My thanks to the CM11 post by shellnut. I'm using the latest CM11 nightlies with the gapps-kk-20140105 and 3.4.0-CM+ kernel. Pretty neat.

[Q] Evo3D GSM not charging in cradle with 4.4.4

My Evo3D GSM is charging in the cradle with stock rom and many other ROMs I recently used.
Now I am testing the LiquidSmooth 3.1 http://forum.xda-developers.com/showthread.php?t=2638534. This ROM looks great but the phone does not charge in cradle.
It charges properly after reverting to stock ROM od CM 10.1 http://www.android-hilfe.de/custom-...ial-cyanogenmod-10-1-4-2-2-19-feb-2013-a.html.
Any ideas? Am I missing an option somewhere in CM 11 (4.4.4) to make it charge in cradle?
Thanks
Bebbo
Well, I switched from LS-KK-v3.1-OFFICIAL-shooteru.zip to LS-KK-v3.2-2014-07-18-shooteru.zip and it's working again.
Odd!
Luckily I hadn't to try that many versions
Bebbo
bebbodl said:
Well, I switched from LS-KK-v3.1-OFFICIAL-shooteru.zip to LS-KK-v3.2-2014-07-18-shooteru.zip and it's working again.
Odd!
Luckily I hadn't to try that many versions
Bebbo
Click to expand...
Click to collapse
Eventually the problem returned. Meanwhile I gave up and returned to an ICS based ROM: mwakious3DromĀ®.
It's working well and 3D is working
Bebbo

Wireless Charging broken after going back to stock

Good morning all.
I have added wireless charging capabilities to the back plate of my LG G3. Charging wireless has been great on the phone. I switched over to CM11 for about a week to check out how stable the ROM is on our G3. I am aware that currently custom ROM's aren't configured to support wireless charging correctly, at least on the Official CM11 Nightlies anyways. So I went back to cable charging while I had CM11 installed.
Now the fun part. I decided to switch back to a nandroid I made of the stock ROM on my G3, which did not have any issues with wireless charging before I had installed CM11. Unfortunately, after performing a nandroid, my G3 still demonstrates wireless charging similar to CM11, i.e. does not charge worth a damn. I performed a full wipe on my phone, including data, cache, system, and dalvik cache, before restoring my nandroid. I'm at a loss as to why I would be experiencing the same wireless charging problems with a nandroid that worked perfectly before I had flashed a different ROM.
Any help would be greatly appreciated.
Extra Info:
Original ROM was rooted. I did not flash a custom kernel.
I installed Invisiblek's Official CM11 Nighty 11/30 ROM.
Twisted politiks said:
Good morning all.
I have added wireless charging capabilities to the back plate of my LG G3. Charging wireless has been great on the phone. I switched over to CM11 for about a week to check out how stable the ROM is on our G3. I am aware that currently custom ROM's aren't configured to support wireless charging correctly, at least on the Official CM11 Nightlies anyways. So I went back to cable charging while I had CM11 installed.
Now the fun part. I decided to switch back to a nandroid I made of the stock ROM on my G3, which did not have any issues with wireless charging before I had installed CM11. Unfortunately, after performing a nandroid, my G3 still demonstrates wireless charging similar to CM11, i.e. does not charge worth a damn. I performed a full wipe on my phone, including data, cache, system, and dalvik cache, before restoring my nandroid. I'm at a loss as to why I would be experiencing the same wireless charging problems with a nandroid that worked perfectly before I had flashed a different ROM.
Any help would be greatly appreciated.
Extra Info:
Original ROM was rooted. I did not flash a custom kernel.
I installed Invisiblek's Official CM11 Nighty 11/30 ROM.
Click to expand...
Click to collapse
I thought I read somewhere the wireless charging issue was in the kernel, but I'm not sure stock would even boot on an aosp kernel. Not my area of expertise. Check your about phone and see if everything looks stock.
Sent from my G3, Unlocked by Team Codefire
Twisted politiks said:
Good morning all.
I have added wireless charging capabilities to the back plate of my LG G3. Charging wireless has been great on the phone. I switched over to CM11 for about a week to check out how stable the ROM is on our G3. I am aware that currently custom ROM's aren't configured to support wireless charging correctly, at least on the Official CM11 Nightlies anyways. So I went back to cable charging while I had CM11 installed.
Now the fun part. I decided to switch back to a nandroid I made of the stock ROM on my G3, which did not have any issues with wireless charging before I had installed CM11. Unfortunately, after performing a nandroid, my G3 still demonstrates wireless charging similar to CM11, i.e. does not charge worth a damn. I performed a full wipe on my phone, including data, cache, system, and dalvik cache, before restoring my nandroid. I'm at a loss as to why I would be experiencing the same wireless charging problems with a nandroid that worked perfectly before I had flashed a different ROM.
Any help would be greatly appreciated.
Extra Info:
Original ROM was rooted. I did not flash a custom kernel.
I installed Invisiblek's Official CM11 Nighty 11/30 ROM.
Click to expand...
Click to collapse
I find that strange it would give you trouble after a complete wipe and restore, although I am new to the LG phones and havent done a whole lot with it yet, I have always been an HTC guy, maybe try returning to stock with the LG flash tool, re-root etc and see if it fixes it, I am curious because I just ordered my wireless charging pad and didnt get to try it yet.
mcerk02 said:
I find that strange it would give you trouble after a complete wipe and restore, although I am new to the LG phones and havent done a whole lot with it yet, I have always been an HTC guy, maybe try returning to stock with the LG flash tool, re-root etc and see if it fixes it, I am curious because I just ordered my wireless charging pad and didnt get to try it yet.
Click to expand...
Click to collapse
i hope you ordered a new sticker to enable the wireless too, or you will be lol
bweN diorD said:
I thought I read somewhere the wireless charging issue was in the kernel, but I'm not sure stock would even boot on an aosp kernel. Not my area of expertise. Check your about phone and see if everything looks stock.
Sent from my G3, Unlocked by Team Codefire
Click to expand...
Click to collapse
I took a look at the kernel. It was stock. I went ahead and flashed dragon's custom kernel. I'm gonna leave it on the charger again tonight. Hopefully your advice hits the mark.
mcerk02 said:
I find that strange it would give you trouble after a complete wipe and restore, although I am new to the LG phones and havent done a whole lot with it yet, I have always been an HTC guy, maybe try returning to stock with the LG flash tool, re-root etc and see if it fixes it, I am curious because I just ordered my wireless charging pad and didnt get to try it yet.
Click to expand...
Click to collapse
That will be my next plan of action if the custom kernel doesn't pull through tonight. Thanks for the input, I had no idea there was a tool to bring our phone back to stock.
Sent from my VS985 4G using XDA Free mobile app
Yea, ordered the sticker and pad, I find it stupid as hell they put the pins there for it but Verizon don't give you the capability...wtf?
It seems to be fixed with the custom kernel. Charged fully overnight .
Thanks for the quick responses.
Sent from my VS985 4G using XDA Free mobile app

Wireless Charging.

All,
I have a VS985 running Illusion ROM from AT&T with 777 AOSP Kernel since I wanted to use Lollipop on GSM without being bugged by the Call Forwarding Bug.
I bought a QI charging back cover and a local QI charging pad. But there is a strange thing that's happening. Instead of charging the phone, it discharges the phone. I kept it on the charger and the Blue light lit up showing that its charging and it was at 50% when I kept it. After a few minutes it went down to 48% rather than increment.
Any clues why this is happening.
is the screen on when charging ? and also is your charger less than 2000milliamps. if not, you better quickly make a tinfoil helmet just in case.
phrozenwire said:
All,
I have a VS985 running Illusion ROM from AT&T with 777 AOSP Kernel since I wanted to use Lollipop on GSM without being bugged by the Call Forwarding Bug.
I bought a QI charging back cover and a local QI charging pad. But there is a strange thing that's happening. Instead of charging the phone, it discharges the phone. I kept it on the charger and the Blue light lit up showing that its charging and it was at 50% when I kept it. After a few minutes it went down to 48% rather than increment.
Any clues why this is happening.
Click to expand...
Click to collapse
Wireless charging only works on stock, no roms.
bweN diorD said:
Wireless charging only works on stock, no roms.
Click to expand...
Click to collapse
This is not 100% accurate. From what I see across various forums, the non-Verizon variants seem to have on trouble with wireless charging (regardless of which custom rom they are running).
I have the VS985, and with the SkyDragon custom KKat rom (based of stock G3), and his kernel, I can wireless charge without issue. I haven't found a single AOSP lollipop rom that wireless charing works with.
XipherNCSU said:
This is not 100% accurate. From what I see across various forums, the non-Verizon variants seem to have on trouble with wireless charging (regardless of which custom rom they are running).
I have the VS985, and with the SkyDragon custom KKat rom (based of stock G3), and his kernel, I can wireless charge without issue. I haven't found a single AOSP lollipop rom that wireless charing works with.
Click to expand...
Click to collapse
my post is entirely accurate.
this is the verizon forum, and there are 0 custom roms (aosp/slim/cyanogen based) that have wireless charging working.
skydragon and jasmine are stock roms, thats why it works.
when someone says custom rom, they are generally not referring to stock based roms, because in comparison, there is really little custom about a stock based rom.
aosp, etc. are built from the ground up, with custom software. there is very little stock code used. thats why most stock things cant be transferred directly into a custom rom. the software is a completely different base.
so, you said i was wrong, then said this:
I have the VS985, and with the SkyDragon custom KKat rom (based of stock G3), and his kernel, I can wireless charge without issue. I haven't found a single AOSP lollipop rom that wireless charing works with.
Click to expand...
Click to collapse
thats pretty much exactly what i said.
hope that clears things up for you.
bweN diorD said:
my post is entirely accurate.
this is the verizon forum, and there are 0 custom roms (aosp/slim/cyanogen based) that have wireless charging working.
skydragon and jasmine are stock roms, thats why it works.
when someone says custom rom, they are generally not referring to stock based roms, because in comparison, there is really little custom about a stock based rom.
aosp, etc. are built from the ground up, with custom software. there is very little stock code used. thats why most stock things cant be transferred directly into a custom rom. the software is a completely different base.
so, you said i was wrong, then said this:
thats pretty much exactly what i said.
hope that clears things up for you.
Click to expand...
Click to collapse
There was no malice in my reply to your post earlier bud, don't take it that way
I've been forum and G+ Community hopping all day, and simply didn't realize I was in the VS985 forum specifically is all.
I was just trying to say that some other posts have referenced it only working on barebones stock, period...kernel and all. :laugh:

ROM recommendations with wireless charging.

Hi guys,
I have been running CM12.1 but have gotten very tired of not having qi charging. The only ROM I have been able to find that is 5.0+ with wireless charging is skydragon, but it borked my bluetooth with my car stereo.
I was wondering if anyone has any recommendations for roms that are 5.0+ with wireless charging. I would even be willing to go back to stock rooted if there was any easily flashable zip that is pre rooted.
Thanks a lot guys!
inaudible101 said:
Hi guys,
I have been running CM12.1 but have gotten very tired of not having qi charging. The only ROM I have been able to find that is 5.0+ with wireless charging is skydragon, but it borked my bluetooth with my car stereo.
I was wondering if anyone has any recommendations for roms that are 5.0+ with wireless charging. I would even be willing to go back to stock rooted if there was any easily flashable zip that is pre rooted.
Thanks a lot guys!
Click to expand...
Click to collapse
skydragon and jasmine, or modified stock roms, are the only ones wireless charging works.
Cool, I'll try Jasmine. It should work on stock kernels, but I couldn't get my phone to boot with skydragon unless I selected the modified kernel. I see if Jasmine gives me the same bluetooth issues. I was reviewing the thread for jasmine and searched for charging but I could not find any verification if wireless charging was working. Someone asked, but there was no response.
Thank you!
inaudible101 said:
Cool, I'll try Jasmine. It should work on stock kernels, but I couldn't get my phone to boot with skydragon unless I selected the modified kernel. I see if Jasmine gives me the same bluetooth issues. I was reviewing the thread for jasmine and searched for charging but I could not find any verification if wireless charging was working. Someone asked, but there was no response.
Thank you!
Click to expand...
Click to collapse
its stock based, it works, trust me.
Well the wireless charging on jasmine works great just like skydragon. Sadly, also just like sky dragon the bluetooth cuts out constantly with my kenwoord stereo. I'm assuming it's a kernel issue since I have zero problems with the bluetooth on CM12 and 12.1. I guess it's back to my s5 if I want bluetooth and wireless charging to work correctly.
Thanks for the recommendations though!

Categories

Resources