Hiii friends i am happy today to show you that how to root samsung galaxy ace nxt sm g313h
Where's the root bro
rkishu32 said:
Hiii friends i am happy today to show you that how to root samsung galaxy ace nxt sm g313h
Click to expand...
Click to collapse
Please Send solution
Where is the process?please inform if you have found that!
msudhir said:
Please Send solution
Click to expand...
Click to collapse
MODEL NUMBER - SM-G313H(Galaxy ace next)
BASEBAND VERSION - G313HDDU0AOA1
BUILD NUMBER - KOT49H.G313HDDU0AOA1
Okk...I have tried all the methods to root this model SM-G313H...Every method failed...But at last i found the solution...I am describing step by step...
Firstly you have to download a few things-
a) Download windows version of KingoRoot(Not Kingroot!!) and install it in your pc
Link: https://www.kingoapp.com/
b)Download Odin for android preferably Odin v.3.09 for Samsung. You can download any version otherwise.
Now your objectives are mainly two things...firstly,You have to root your phone and then install custom recovery.
Rooting the phone:
a)Allow USB debugging in you model by tapping the "build no" a few times.
b)Connect the mobile with your pc with a working data cable
c)Run KingoRoot.exe. It will detect your phone and follow the instructions.You have to wait till the root is done.At 97/98 % it will ask for rooting in a prompt...you have to click ok..you phone will boot in recovery and after that rooting process will be completed...You can see "SuperUser" in your mobile screen.
Now your phone is rooted.Verify using Rootchecker. Now,the next job is to flash a custom recovery.
Flashing Custom recovery(TWRP)
a)Download TWRP file for SM-G313H...Download "TWRP_2.8.5.0_Vivalto.tar.md5" (Not TWRP_2.8.5.0_Vivalto_flashable.zip).
link given below:
https://forum.xda-developers.com/ace-4/development/recovery-twrp-recovery-2-8-5-0-samsung-t3038601
After download extract it.
a)Switch off your phone.Boot in download mode by pressing 3 keys simultaneously : Home key+Power key+Volume down key
b)Follow the instructions in the screen and enter into download mode by clicking continue
c)Run odin in your pc and connect the phone with pc using a data cable.Odin will detect the phone.Click the option AP and select the TWRP extracted file.Check The AP box.Only 3 options should be checked...Auto reboot,F.reset time and the AP itself.Now click on start and it will flash TWRP in your device.
So,here is the full process regarding rooting and installing TWRP. Its fully functional for this model with the given configuration.Hope its solved but if you are getting any problem feel free to ask.
Related
Hallo everyone.
I have just tried to follow this guide to install Google Play and so on: http://forum.xda-developers.com/showthread.php?t=2256075
Guide:
I'm here for help you, and yes I bought K900
Here is the international .inb file to flash.
Part One: How flash international version:
1. create SDFUSE folder in the / of sdcard.
2. insert inb file there
3. go to fastboot mode (Vol+ + Power) and choose sdfuseupdate
4. done.
you'll get official international 47 rom (ROW region). It has google apps, it has play store.
INB file is here:
https://mega.co.nz/#F!xNdywAJA!AFbE_HikuoFODLpoc1j7Yg
But right after the message saying SDCARD UPDATE COMPLETED (as i remember it), the phone wont start again. The three buttons on the front flashes and nothing else happens.
Any clues to what might be the problem?
I hope you can help me!
Best regard
Jonas Kristiansen
Question
Hi Jonas,
Sorry to hear that.
Did you totally brick your phone? Can you still go into recovery or Hboot?
Is your phone recognized by adb and fastboot?
If you tell me more, maybe I can help.
Denis
Jonas Kristiansen said:
Hallo everyone.
I have just tried to follow this guide to install Google Play and so on: http://forum.xda-developers.com/showthread.php?t=2256075
Guide:
I'm here for help you, and yes I bought K900
Here is the international .inb file to flash.
Part One: How flash international version:
1. create SDFUSE folder in the / of sdcard.
2. insert inb file there
3. go to fastboot mode (Vol+ + Power) and choose sdfuseupdate
4. done.
you'll get official international 47 rom (ROW region). It has google apps, it has play store.
INB file is here:
https://mega.co.nz/#F!xNdywAJA!AFbE_HikuoFODLpoc1j7Yg
But right after the message saying SDCARD UPDATE COMPLETED (as i remember it), the phone wont start again. The three buttons on the front flashes and nothing else happens.
Any clues to what might be the problem?
I hope you can help me!
Best regard
Jonas Kristiansen
Click to expand...
Click to collapse
Same problem
Hello
I have same problem, i brick my K900. I try to start it, but phone is really little ignorant, absolutly not response to all. Flash using xFSTK is without chance.
Yep, Recovery and DroidBoot is unavilable. Phone only one flash touch buttons and nothing more... :crying:
Can you help me? I thing, hard-brick is too hard to solve.
Sorry for my english...
Maybe it will be usefull:
Volume down, hold it, then power button, Testing Menu appear, Droidboot, Recovery, Clear cache, Clear data (factory reset), reboot.
how unbrick ur k900 device
Jonas Kristiansen said:
Hallo everyone.
I have just tried to follow this guide to install Google Play and so on: http://forum.xda-developers.com/showthread.php?t=2256075
Guide:
I'm here for help you, and yes I bought K900
Here is the international .inb file to flash.
Part One: How flash international version:
1. create SDFUSE folder in the / of sdcard.
2. insert inb file there
3. go to fastboot mode (Vol+ + Power) and choose sdfuseupdate
4. done.
you'll get official international 47 rom (ROW region). It has google apps, it has play store.
INB file is here:
https://mega.co.nz/#F!xNdywAJA!AFbE_HikuoFODLpoc1j7Yg
But right after the message saying SDCARD UPDATE COMPLETED (as i remember it), the phone wont start again. The three buttons on the front flashes and nothing else happens.
Any clues to what might be the problem?
I hope you can help me!
Best regard
Jonas Kristiansen
Click to expand...
Click to collapse
(my english is veryyyyyyyyyy bad)
dont worry . there is a simple method :
this method work for hardbrick and softbrick too.
first download a favorite Rom you want
u can choice ur Rom from this page : http://m.kaskus.co.id/post/5300581ffbca17d47b8b457c#post5300581ffbca17d47b8b457c
download and install manufacturing flash tool and intel android device usb driver
https://dl.dropboxusercontent.com/u/26833962/K900 Tools/ManufacturingFlashTool_Setup_6.0.2.exe
http://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
second Refer this : http://forum.xda-developers.com/show...postcount=3245
This method require computer with driver and software installed and USB cable for sure
( unzip ur rom and open xml file on ur rom with manufacturing flash tool softwre)
maybe this video can help you too :
https://www.youtube.com/watch?v=BhvA_T694kw
This method works on my hardbrick device succeesfully
tatu63 said:
(my english is veryyyyyyyyyy bad)
dont worry . there is a simple method :
this method work for hardbrick and softbrick too.
first download a favorite Rom you want
u can choice ur Rom from this page : http://m.kaskus.co.id/post/5300581ffbca17d47b8b457c#post5300581ffbca17d47b8b457c
download and install manufacturing flash tool and intel android device usb driver
https://dl.dropboxusercontent.com/u/26833962/K900 Tools/ManufacturingFlashTool_Setup_6.0.2.exe
http://software.intel.com/en-us/android/articles/intel-usb-driver-for-android-devices
second Refer this : http://forum.xda-developers.com/show...postcount=3245
This method require computer with driver and software installed and USB cable for sure
( unzip ur rom and open xml file on ur rom with manufacturing flash tool softwre)
maybe this video can help you too :
https://www.youtube.com/watch?v=BhvA_T694kw
This method works on my hardbrick device succeesfully
Click to expand...
Click to collapse
hi tatu63
Me too got my K900 bricked while updating Rom from MFT .
Its not starting anymore. Complete black screen no menu lights at all.
When i connect my phone to usb cable it shows this in MFT tool and hangs up
07/01/14 12:47:15.886 DEBUG : New Android device -> serial: MedfieldEC710F76 status: 0 port: 1
and
Hi Guys, im a not very well experienced so plz forgive my mistakes if any.
Here i am proudly presenting you guys that u all were waiting eagerly for-Samsung galaxy star pro GT S7262 lollipop rom and a few tweaks to make look like stock android lollipop.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
RULES AND REGULATIONS
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
1.Please follow the instructions carefully and im not responsible for bricked devices
2.This guide is only for SAMSUNG GALAXY STAR PRO GT-S7262
3.Follow all instructions included
4.anything more???????
-------------------------------------------------------------------------------------------------------------------------------------------------------------------
STEP 1- ROOTING GT-S7262 WITH KINGO ANDROID ROOT
-------------------------------------------------------------------------------------------------------------------------------------------------------------------
1. Download Kingo android root for pc
2.Install it on your pc
3.Connect your device with an USB cable
4.Kingo will automatically recognize ur device and prompt it to root your device
5.Internet connection will be required for the device drivers and additonal files
6.Rooting process will take about 5-10 minutes so be patient
7.Kingo superuser and kingoapp will be installed on your device, open it and see root status
------------------------------------------------------------------------------------------------------------------------------------------------------------------
STEP 2- INSTALLING CWM RECOVERY FOR GT-S7262 VIA ODIN
------------------------------------------------------------------------------------------------------------------------------------------------------------------
1.Download and install ODIN vX.X.x from here
2.Download CWM recovery file here
3.Connect your device to your PC using usb cable
4.Open Odin and it will show you <ID:0/009> Added!!
5.Browse ur CWM file in windows and extract the file named recovery.tar.zip and recovery.tar.md5 file will come.
5.Select PDA and browse for ur CWM recovery file i.e recovery.tar.md5
6.Then click start and wait until it shows SUCCESS
7.Unplug your device and start it into Recovery mode by pressing vol.up+homekey+powerkey
8.You will see the recovery and press on reboot system now button if OS doesn't start then do not worry.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
STEP 3- INSTALLING LOLLIPOP ROM ON THE DEVICE.
-----------------------------------------------------------------------------------------------------------------------------------------------------------------
1. Download the ROM package from here
2. Do not unzip the file
3.Move it to your SD card
4.Insert it into your device and boot into recovery mode.
5.First clear factory data by pressing on the option and then select yes
6.Wipe cache partition by pressing on the option and select yes
7.Go to advanced and wipe dalvik cache and select yes.
8.Go to menu and select install zip from SD card and browse from ur sd card choose it and select yes
9.It will take about 10 minutes to install the rom and do not keep the device inserted into ur pc
10.It will show finished installing rom and you have to reboot the system now. However sometimes it will automatically reboot.
11.Setup your account and other stuff and WOW u have installed Lollipop rom for ur device.
12.However ur lollipop doesnt look completely like Stock lollipop so follow the instructions below.
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
MAKING YOUR DEVICE LOOK COMPLETELY LIKE LOLLIPOP STOCK
----------------------------------------------------------------------------------------------------------------------------------------------------------------------
Guys if u made it successfully till here then its time to make your device look completely like stock lollipop
First of all your device has Xposed module which will help u along the way.
STEPS:
1.Download and install L Launcher from playstore.
2.Download and install kingo superuser.
3.Open kingo superuser and uninstall nova launcher but be carefull that L launcher is installed properly and it is working.
4.L Launcher will make ur device look like lollipop completely but your status bar isn't looking like lollipop
5.Download and install Xstana from playstore
6.Open Xposed module and open framework and install it. Device will have to be rebooted.
7.After Device is up and running, open Xstana and select AOSP L status bar theme. Device will have to Be rebooted.
8. Download and install L Locker and choose Android L mode for lollipop lockscreen.
And guys there u have it, lollipop for your Samsung galaxy star pro GT S7262
Look below for Performance tweaks.
--------------------------------------------------------------------------------------------------------------------------------------------------------------
Performance Tweaks
--------------------------------------------------------------------------------------------------------------------------------------------------------------
Download and install No-frills CPU control and open it. Allow superuser permissions. Select min frequency -1.0GHz
and I/O scheduler to noop and implement it by apply and also check the box Apply on boot. Reboot the device.
___________________________________________________________________________________________
CREDITS
1.Russell Malinao for the lollipop rom
2.Kingo android root
3.Myself for providing u guys this guide.
Please move thos thrrad to the right place
Sent from my GT-S5282 using XDA Free mobile app
Akhil99 said:
Hi Guys, im a not very well experienced so plz forgive my mistakes if any.
Here i am proudly presenting you guys that u all were waiting eagerly for-Samsung galaxy star pro GT S7262 lollipop rom and a few tweaks to make look like stock android lollipop.
---------------------------------------------------------------------------------------------------------------------------------------------------------------
Click to expand...
Click to collapse
Hey Russell i flashed ur SLIM[KK] rom for s7262.. but it creates problem with my sim card..it ain't working properly. it is showing no connection but tower is showing full.. it is showing sim crd towers even after i took it off from my device... plz help me.. i m in a big mess.. :crying:
nathsoumik said:
Hey Russell i flashed ur SLIM[KK] rom for s7262.. but it creates problem with my sim card..it ain't working properly. it is showing no connection but tower is showing full.. it is showing sim crd towers even after i took it off from my device... plz help me.. i m in a big mess.. :crying:
Click to expand...
Click to collapse
Sorry man.... Russell is not active now on XDA.
You can flash cm11 for the best KitKat experience. It's not themed kk... It's real kk!
HELLO,
I own a samsung galaxy Tab 4 SM-T231(4 GB) and i am running stock firmware (JB 4.4.2) , rooted and don't know that the bootloader is unlocked or not. It was stuck in a bootloop , I know that it need's to be factory data reset but i accidently formatted it . I was using TWRP . I know that it need's samsung kies . I don't know that the USB Debugging is on or not. Whether i should use ODIN or SAMSUNG KIES , and how to use them.
Hi,
Reboot into Download mode and flash your stock firmware with Odin. AFAIR we don't care about usb debugging while being into this mode. I think there's no bootloader to unlock with this tablet.
Thanks
Hello ,
sir can we use samsung kies to flash it....
Faizan shaik said:
Hello ,
sir can we use samsung kies to flash it....
Click to expand...
Click to collapse
I don't think so.
Samsung Kies is bs but Odin is the official unofficial tool to flash firmwares on Samsung devices.
Verification
HELLO,
SIR I REBOOTED MY DEVICE IN DOWNLOAD MODE , BUT I HAVE SEEN MANY DEVICES which shows ( in download mode)
ODIN MODE (IN RED)
PRODUCT NAME : *****
CURRENT BINARY : CUSTOM
SYSTEM STATUS : CUSTOM
AND SO ON
BUT MINE SAY'S
ODIN MODE ( IN WHITE)
PRODUCT NAME : SM-T231
SYSTEM STATUS : CUSTOM
THAT'S IT ,
I THINK IT'S A PROBLEM IF IT'S NOT JUST REPLY ME AND CAN YOU PLEASE GIVE ME THE CORRECT STOCK ROM FOR THIS DEVICE .
THANKS IN ADVANCE.
You can find stock firmwares here.
I don't know Samsung devices very well so you may try posting your question about Odin in your device specific forum.
Simple Root for Samsung Galaxy Star Pro GT-S7262
[ROOT] Galaxy Star Pro using PC....{WORKING 2016} {WITH PROOF}
Hey guys, im back with a simple rooting method for Galaxy Star Pro, as i have also experienced that there's something with this phone it wont be rooted easily , i myself had to go through ALOT to finally root and i've got a method which ill share below.........SO HERE IT COMES................
REQUIREMENTS
1. Unrooted Galaxy Star Pro {IT CAN WORK FOR MANY MANY OTHER DEVICES AS WELL}
2. iRoot for Windows
3. Samsung Mobile Drivers
INSTRUCTIONS
1. Install Samsung Mobile Drivers properly
2. Install iRoot for Windows
3. Open iRoot app on PC and connect Phone
4. iRoot will check for root and will ask to root
5. Tap ROOT button
6. Your Device will restart
Voila, you will see Kingroot installed and root access available......................:good:
DOWNLOAD LINKS
Samsung Mobile Drivers for Windows : http://downloadcenter.samsung.com/c...0597/SAMSUNG_USB_Driver_for_Mobile_Phones.exe
iRoot for Windows : https://soft-mgyun-com.qcloudcdn.com/files/products/vRoot/1005/zip/iRoot_160527.zip
SEE THE ATTACHED PICTURES FOR PROOF
HIT THE LIKE BUTTON IF I HELPED........
WILL APPRECIATE IT...........
It works............
THANK U the method works.........
Oh wow rooted 20+ phones with this method..
TechSTER™ said:
Hey guys, im back with a simple rooting method for Galaxy Star Pro, as i have also experienced that there's something with this phone it wont be rooted easily , i myself had to go through ALOT to finally root and i've got a method which ill share below.........SO HERE IT COMES................
REQUIREMENTS
1. Unrooted Galaxy Star Pro {IT CAN WORK FOR MANY MANY OTHER DEVICES AS WELL}
2. iRoot for Windows
3. Samsung Mobile Drivers
INSTRUCTIONS
1. Install Samsung Mobile Drivers properly
2. Install iRoot for Windows
3. Open iRoot app on PC and connect Phone
4. iRoot will check for root and will ask to root
5. Tap ROOT button
6. Your Device will restart
Voila, you will see Kingroot installed and root access available......................:good:
DOWNLOAD LINKS
Samsung Mobile Drivers for Windows : http://downloadcenter.samsung.com/c...0597/SAMSUNG_USB_Driver_for_Mobile_Phones.exe
iRoot for Windows : https://soft-mgyun-com.qcloudcdn.com/files/products/vRoot/1005/zip/iRoot_160527.zip
SEE THE ATTACHED PICTURES FOR PROOF
HIT THE LIKE BUTTON IF I HELPED........
WILL APPRECIATE IT...........
Click to expand...
Click to collapse
Your method didn't worked bro. I was having some problem in flashing a custom recovery. So I thought that I would first root my device(having stock rom and recovery) then use flashify to do all that stuff, but it didn't happen, I was not able to root by this method.
But I downloaded a lot of recoveries to try, AND IF ANYBODY IS TRYING TO FLASH ONE - TWRP 2.8.1.0 worked for me. I don't know from where i downloaded it, but hope you find the right one.
Gurkirat_Singh said:
Your method didn't worked bro. I was having some problem in flashing a custom recovery. So I thought that I would first root my device(having stock rom and recovery) then use flashify to do all that stuff, but it didn't happen, I was not able to root by this method.
But I downloaded a lot of recoveries to try, AND IF ANYBODY IS TRYING TO FLASH ONE - TWRP 2.8.1.0 worked for me. I don't know from where i downloaded it, but hope you find the right one.
Click to expand...
Click to collapse
Sad.....but has worked on many phones for me........Good Luck
hey bro iroot for Windows is not downloading
Eventhough I have done a lot of search in samsung galaxy J2 ACE (G532G),couldn't find a single forum ,post,tutorial in name of J2 ACE..There are rooting tutorials only available for J2 PRIME (G532G),which is a similar ROM variant.I have tried many of J2 Prime tutorials and end up in bootloop/boot lock screen.So requesting XDA developers to help me in creating prerooted firmware.I have added stock roms's google drive link.
Its a stock ROM of J2ACE .I downloaded it after i got into bootloop .Flashed in my J2ACE mobile ,verified working good.
https://docs.google.com/uc?id=0B5BpnlH8S_TWUW51RmNqWmFDNlU&export=download
Any developer kindly use above ROM and create a prerooted ROM.As without root ,the stock marshmallow 6.0.1 ROM filled with bloatwares of samsung ,which are memory eaters.I got left only 500mb,if I add any four or five apps,out of 8GB internal memory.SD card also write protected.I couldnt install and use whatsapp, bcz I end up in exhausting free memory to 50mb.
Please ,any help greatly appreciated by few thousand users of J2 ACE out there.
Below are J2prime G532G tutorials ,I have gone through.I request other J2ACE holders not to give them try.If you have tried them accidentally and ended up in bootloop or boot lock screen,Kindly use ROM from above drive link and flash it with ODIN.
1.Rooting Method of G532G/H/M.(Tried this method and end up in Boot Lock Screen)
https://forum.xda-developers.com/android/development/root-samsung-galaxy-j2-prime-g532m-t3523090
2.ROOT G532G WITHOUT BOOT LOCK PASSWORD ( But it does get into Boot Lock)
https://www.youtube.com/watch?v=yrWmnt3dZKc
http://npmobilehub.com/g532g-root-unlock-success/
Solution :
Video tutorial on flashing J2 ACE stock ROM flashing,If you get "Set Warrenty Bit void" KNOXX error by flashing and also for BOOT Lock Screen,
https://www.youtube.com/watch?v=a5Q9JJwunZM&feature=youtu.be
There is people out there saying use Z3x Box to unlock Boot Lock screen .But it does cost 10,000 Indian currencies ,more price than that of J2 ACE mobile price.Also there is 'no box' version of Z3x samsung tool v24.3 available over internet ,which unfortunately doesnt support G532G Unlocking.There is no latest version of Z3x tool 27.00 without Box available so far.No local unlocking vendors/service centers, i could find in south indian cities around me.So Pre-Rooted ROM is the only hope of People buying Middle end budget phone Samsung Galaxy J2 ACE(G532G).
How can a noob like me tell the difference btw sm-g532g and sm-g532g? J2 Ace (my phone) claims to be model sm-g532g, how do I tell the difference?
Root Samsung j2 ace
Well i cant provide you the rom, but here i can tell how to root it..
For rooting samsung j2 ace-
- First Install the rom which you have provided(yes i have rooted samsung j2 ace by your rom)
- After installing rom, Make sure you dont download any ota update from samsung (very Important)
- Boot your phone into download mode, and flash the twrp recovery. (you can search on google for that and if still you dont get it comment back i will give you download link)
- This time you will see that you phone doesnt go in boot lock (Yellow warning appears but not red one)
- Now boot into recovery by ADB and you will have twrp recovery
- Now flash super-su zip
Thanks
TWRP file & supersu zip needed for J2ACE G532G
Sir,kindly post me the TWRP file ..thanks in advance..
2 methods for TWRP + root
I am using the stock ROM you so kindly have made available.
The first method I have tried with success is "EASY-G532-TWRP+ROOT-NEW". There are an exe file and an MP4 file in the folder. You only need to have Samsung USB drivers installed on your PC. Connect your phone to your PC - normal mode. Play the media file for instructions. Your phone will be rooted witin
https://www.dropbox.com/sh/xjdt8rhw2mme9xy/AAD6S10PRyw3FYQ5yHRVmZfFa?dl=0
The second method is quite simple.
- flash TWRP via Odin
- in recovery mode, flash SuperSU and then no-verity-no-encrypt.
Done.
https://www.dropbox.com/sh/40600gg21da0yec/AADux6dXyqchsMMG-jDmedxDa?dl=0