Eventhough I have done a lot of search in samsung galaxy J2 ACE (G532G),couldn't find a single forum ,post,tutorial in name of J2 ACE..There are rooting tutorials only available for J2 PRIME (G532G),which is a similar ROM variant.I have tried many of J2 Prime tutorials and end up in bootloop/boot lock screen.So requesting XDA developers to help me in creating prerooted firmware.I have added stock roms's google drive link.
Its a stock ROM of J2ACE .I downloaded it after i got into bootloop .Flashed in my J2ACE mobile ,verified working good.
https://docs.google.com/uc?id=0B5BpnlH8S_TWUW51RmNqWmFDNlU&export=download
Any developer kindly use above ROM and create a prerooted ROM.As without root ,the stock marshmallow 6.0.1 ROM filled with bloatwares of samsung ,which are memory eaters.I got left only 500mb,if I add any four or five apps,out of 8GB internal memory.SD card also write protected.I couldnt install and use whatsapp, bcz I end up in exhausting free memory to 50mb.
Please ,any help greatly appreciated by few thousand users of J2 ACE out there.
Below are J2prime G532G tutorials ,I have gone through.I request other J2ACE holders not to give them try.If you have tried them accidentally and ended up in bootloop or boot lock screen,Kindly use ROM from above drive link and flash it with ODIN.
1.Rooting Method of G532G/H/M.(Tried this method and end up in Boot Lock Screen)
https://forum.xda-developers.com/android/development/root-samsung-galaxy-j2-prime-g532m-t3523090
2.ROOT G532G WITHOUT BOOT LOCK PASSWORD ( But it does get into Boot Lock)
https://www.youtube.com/watch?v=yrWmnt3dZKc
http://npmobilehub.com/g532g-root-unlock-success/
Solution :
Video tutorial on flashing J2 ACE stock ROM flashing,If you get "Set Warrenty Bit void" KNOXX error by flashing and also for BOOT Lock Screen,
https://www.youtube.com/watch?v=a5Q9JJwunZM&feature=youtu.be
There is people out there saying use Z3x Box to unlock Boot Lock screen .But it does cost 10,000 Indian currencies ,more price than that of J2 ACE mobile price.Also there is 'no box' version of Z3x samsung tool v24.3 available over internet ,which unfortunately doesnt support G532G Unlocking.There is no latest version of Z3x tool 27.00 without Box available so far.No local unlocking vendors/service centers, i could find in south indian cities around me.So Pre-Rooted ROM is the only hope of People buying Middle end budget phone Samsung Galaxy J2 ACE(G532G).
How can a noob like me tell the difference btw sm-g532g and sm-g532g? J2 Ace (my phone) claims to be model sm-g532g, how do I tell the difference?
Root Samsung j2 ace
Well i cant provide you the rom, but here i can tell how to root it..
For rooting samsung j2 ace-
- First Install the rom which you have provided(yes i have rooted samsung j2 ace by your rom)
- After installing rom, Make sure you dont download any ota update from samsung (very Important)
- Boot your phone into download mode, and flash the twrp recovery. (you can search on google for that and if still you dont get it comment back i will give you download link)
- This time you will see that you phone doesnt go in boot lock (Yellow warning appears but not red one)
- Now boot into recovery by ADB and you will have twrp recovery
- Now flash super-su zip
Thanks
TWRP file & supersu zip needed for J2ACE G532G
Sir,kindly post me the TWRP file ..thanks in advance..
2 methods for TWRP + root
I am using the stock ROM you so kindly have made available.
The first method I have tried with success is "EASY-G532-TWRP+ROOT-NEW". There are an exe file and an MP4 file in the folder. You only need to have Samsung USB drivers installed on your PC. Connect your phone to your PC - normal mode. Play the media file for instructions. Your phone will be rooted witin
https://www.dropbox.com/sh/xjdt8rhw2mme9xy/AAD6S10PRyw3FYQ5yHRVmZfFa?dl=0
The second method is quite simple.
- flash TWRP via Odin
- in recovery mode, flash SuperSU and then no-verity-no-encrypt.
Done.
https://www.dropbox.com/sh/40600gg21da0yec/AADux6dXyqchsMMG-jDmedxDa?dl=0
Related
Its been couple of months I am trying to root my Galaxy S2 I9100G which was bought from China. I made deep research on XDA Forum to find any easy method! Several threads out there. At first I tried to follow this thread
The above thread founded helpful for maximum users with any problem. I tried by the provided steps with their "Superatmos (version 2.1 is very stable and recommended)" Kernel.....And it worked...rooted...but vibration function was disable (other users also had this type of problem). Then tried also to check hardware of my phone and everything was fine..I was keep looking for solution and someone on that thread said to "Flash Again With Original Stock Kernel". Well then I flashed again with INDIAN Stock Kernel...........and the result------ my phone was not booting up, only the Yellow Triangle was showing with Samsung Logo. I was just to pull my hairs when I found that many other people had this type of problem and the reason is HARD BRICKED..!!!!
Luckily my phone was restarted in download mode, and then I flashed again with "Superatmos_v3.0_XXLA1" Kernel. and voila! it restarted, booted, rooted and vibration was working again....!
Please note- Binary counter / Yellow Triangle will show. please check this pdf file by the thread-owner --http://db.tt/BwlUTGIl
The only reason for sharing my details above by thinking, its possible that other users may have this kinda problem. so this thread would be make them to relax a little bit. Now below I am repeating the steps for Rooting a Chinese Galaxy S2 I9100G with links. (Followed to Paras Lehana's original thread http://forum.xda-developers.com/showthread.php?t=1570377)
1) Download Odin and install -- View attachment Odin3-v1.85.zip
2) Download this Superatmos Kernel file -- View attachment superatmos_v3.0_XXLA1.tar Believe me it will work any problem. You may try other version, but I Superatmos ver 2.1 which is recommended most wont work...anymore.
3) Go to Download Mode : Turn off phone. Hold vol down+home+turn on button. Release the on button after phone is turning on. After a few second, release all buttons. After that vol up.
4) Run Odin, connect phone with usb cable, yellow COMx will be shown in Odin. (Re-partition should not be ticked (no pit file is required here)
5) Select PDA button, choose the downloaded kernel file (usually a .tar file)
6) Click Start, a PASS will be shown if succeed.
That's it. you are rooted. please check other guidance for CWM Recovery / Super User / Remove Triangle / Binary Counter etc. on the thread-owner's pdf file.
Note: Users who don't wanna flash their Chinese ROM with any other but still wanna access Google/Play etc. they could follow above steps. And after rooting please follow this thread --- http://forum.xda-developers.com/showthread.php?p=29464673
Also users may follow below steps for replacing their Chinese ROM to Any Other.(After ROOT)
This method requirement is root access and Mobile Odin Pro only. Even if the phone are rooted with doomlord’s method and you chose not to have CWM support, it will work too
1) Download the stock firmware and copy it to the root of sdcard (internal). “tar” and “tar.md5”will be supported also.
please check on Sammobile for stock frimwares.
2) Install Mobile Odin Pro
you could search on google for Mobile Odin Pro to get shared pro version file.
3) Run the application and from “Open file …” select file that you just copied into the phone
4) If Everroot option is not ticked itself, please tick it if you want the phone to be automatically rooted during the process
5) I will recommend to tick all three options inside Everroot
6) And also please ticked the wipe data option but it is optional, but can reduce any bugs
7) Start the flashing
8) Result : root access, no CWM support, no busybox
Followed the original post----http://forum.xda-developers.com/showthread.php?t=1570377
I just wanted to associate together all required steps posted on XDA by some real professionals. So it will be easier for those people who is still searching on for Rooing Methods for Chinese Galaxy S2 I9100G.
Thanks
tried it, but couldn't get it to work
Thanks for that.
I have an SGS2
Model number GT-9100G
Android version 4.04
Baseband version I9100GZCLPL
Kernel version 3.0.8-1067026
Build number IMM76D.ZCLPL
On download screen
PRODUCT NAME: GT-i9100G_CHN_CHN
*#1234# gives
PDA: I9100GZCLPL
PHONE: I9100GZCLPL
CSC: I9100GOZHLPL
Build Info: Fri Oct 5 14:28:15 KST 2012
I tried flashing with the 3.0 XXLA1 tar as above and when the phone reboots it gets stuck on the first Samsung screen.
I can't get the old superatmos 2.1 kernel anymore (the "very stable and recommended' version) because the file has disappeared from Mediafire.
The old link was http://www.mediafire.com/?14qqbaw311b3wpm
I also tried 2.1.1 and 2.2 from http://www.android-hilfe.de/2869772-post2.html ... and I think 3.2 as well. They have the same problem.
I was a bit scared but downloaded the old I9100GOZHLPL file from
http://sampro.pl/firmware/android/samsung-i9100g/
and put the .tar.md5 file in the "PDA" box, clicked Start and that always takes it back to where it was (ie working again!).
I read through lots of threads here and followed all the little small instructions: USB debug mode on on phone, PIN off, KIES uninstalled on computer, no SD card. But battery and SIM card still in. The only bit I didn't follow was the "you have to install v1.0 first" advice from http://forum.xda-developers.com/showpost.php?p=22421729&postcount=150 because it wasn't in this post. And of course I would like to repeat what you did _exactly_ by getting the 2.1 kernel but can't find it anywhere anymore.
A Chinese page at http://zhidao.baidu.com/question/510191290.html talks about SuperOneClick working but I haven't tried it.
Another page at http://androidforums.com/galaxy-s2-...37-galaxy-s2-gt-i9100g-all-things-root-4.html talks about a ROM that works on all phones except the Chinese variant
Any suggestions?
Hiii friends i am happy today to show you that how to root samsung galaxy ace nxt sm g313h
Where's the root bro
rkishu32 said:
Hiii friends i am happy today to show you that how to root samsung galaxy ace nxt sm g313h
Click to expand...
Click to collapse
Please Send solution
Where is the process?please inform if you have found that!
msudhir said:
Please Send solution
Click to expand...
Click to collapse
MODEL NUMBER - SM-G313H(Galaxy ace next)
BASEBAND VERSION - G313HDDU0AOA1
BUILD NUMBER - KOT49H.G313HDDU0AOA1
Okk...I have tried all the methods to root this model SM-G313H...Every method failed...But at last i found the solution...I am describing step by step...
Firstly you have to download a few things-
a) Download windows version of KingoRoot(Not Kingroot!!) and install it in your pc
Link: https://www.kingoapp.com/
b)Download Odin for android preferably Odin v.3.09 for Samsung. You can download any version otherwise.
Now your objectives are mainly two things...firstly,You have to root your phone and then install custom recovery.
Rooting the phone:
a)Allow USB debugging in you model by tapping the "build no" a few times.
b)Connect the mobile with your pc with a working data cable
c)Run KingoRoot.exe. It will detect your phone and follow the instructions.You have to wait till the root is done.At 97/98 % it will ask for rooting in a prompt...you have to click ok..you phone will boot in recovery and after that rooting process will be completed...You can see "SuperUser" in your mobile screen.
Now your phone is rooted.Verify using Rootchecker. Now,the next job is to flash a custom recovery.
Flashing Custom recovery(TWRP)
a)Download TWRP file for SM-G313H...Download "TWRP_2.8.5.0_Vivalto.tar.md5" (Not TWRP_2.8.5.0_Vivalto_flashable.zip).
link given below:
https://forum.xda-developers.com/ace-4/development/recovery-twrp-recovery-2-8-5-0-samsung-t3038601
After download extract it.
a)Switch off your phone.Boot in download mode by pressing 3 keys simultaneously : Home key+Power key+Volume down key
b)Follow the instructions in the screen and enter into download mode by clicking continue
c)Run odin in your pc and connect the phone with pc using a data cable.Odin will detect the phone.Click the option AP and select the TWRP extracted file.Check The AP box.Only 3 options should be checked...Auto reboot,F.reset time and the AP itself.Now click on start and it will flash TWRP in your device.
So,here is the full process regarding rooting and installing TWRP. Its fully functional for this model with the given configuration.Hope its solved but if you are getting any problem feel free to ask.
HELLO,
I own a samsung galaxy Tab 4 SM-T231(4 GB) and i am running stock firmware (JB 4.4.2) , rooted and don't know that the bootloader is unlocked or not. It was stuck in a bootloop , I know that it need's to be factory data reset but i accidently formatted it . I was using TWRP . I know that it need's samsung kies . I don't know that the USB Debugging is on or not. Whether i should use ODIN or SAMSUNG KIES , and how to use them.
Hi,
Reboot into Download mode and flash your stock firmware with Odin. AFAIR we don't care about usb debugging while being into this mode. I think there's no bootloader to unlock with this tablet.
Thanks
Hello ,
sir can we use samsung kies to flash it....
Faizan shaik said:
Hello ,
sir can we use samsung kies to flash it....
Click to expand...
Click to collapse
I don't think so.
Samsung Kies is bs but Odin is the official unofficial tool to flash firmwares on Samsung devices.
Verification
HELLO,
SIR I REBOOTED MY DEVICE IN DOWNLOAD MODE , BUT I HAVE SEEN MANY DEVICES which shows ( in download mode)
ODIN MODE (IN RED)
PRODUCT NAME : *****
CURRENT BINARY : CUSTOM
SYSTEM STATUS : CUSTOM
AND SO ON
BUT MINE SAY'S
ODIN MODE ( IN WHITE)
PRODUCT NAME : SM-T231
SYSTEM STATUS : CUSTOM
THAT'S IT ,
I THINK IT'S A PROBLEM IF IT'S NOT JUST REPLY ME AND CAN YOU PLEASE GIVE ME THE CORRECT STOCK ROM FOR THIS DEVICE .
THANKS IN ADVANCE.
You can find stock firmwares here.
I don't know Samsung devices very well so you may try posting your question about Odin in your device specific forum.
Hello so i have a sm-G928F samsung galaxy s6 edge plus
i've rooted it and installed nethunter over it using this stock
yesterday it started to detect a usb being plugged in and out every few second even tho it weren't
1). First i tried to recover an old backup using TWRP from when the phone worked fine, this did'nt solve my problem...
so i decided to unroot it so i could take it back to the store leading to 2
2). using odin and stock firmware from here and chosing the one named: G928FXXS3BPIB (i'm from denmark and read somewhere this is the right one)
when i run the stock firmware in odin it fails at cm.bin, i've tried change usb port with no success
and after the first try my device is now bricked and my only options are to go into download mode/screen of failor
Any help would be greatly apriciated!
// Ghostetr
Hello guys ,
I got my samsung s7 edge and i want to bypass the account.
I have on recovery this version g935fxxu2erem ( i guess this is android 8 after i searched on google ) and i downloaded this combination file COMBINATION_FA60_G935FXXU2ARA1 . I want to know if this is the right combination file and what version of android 6.0.1 i need to download ? Ty
Atenttion DONT flash that combination file to the phone or you will get a bootloader exception error, is fixable but a lot of work to do to it. repeat, don't flash that combination file to android 8.0
show me a picture of your device in download mode