Related
Hi,
I tried rooting my L9 yesterday and everything was fine! But today when I restarted my phone, it got stucked! It not going pass through LG logo. I tried hard-resetting my phone by pressing Power + Vol Down + Home, but still the same issue. Please help!
NidalPawne said:
Hi,
I tried rooting my L9 yesterday and everything was fine! But today when I restarted my phone, it got stucked! It not going pass through LG logo. I tried hard-resetting my phone by pressing Power + Vol Down + Home, but still the same issue. Please help!
Click to expand...
Click to collapse
Did you remove some system apps after root your phone?
artit said:
Did you remove some system apps after root your phone?
Click to expand...
Click to collapse
No i didn't..! The phone ran out of battery and then when I switched it on, it is stucked at boot!
NidalPawne said:
No i didn't..! The phone ran out of battery and then when I switched it on, it is stucked at boot!
Click to expand...
Click to collapse
I think the easiest way to recover it is to use LG mobile support tool. Please search for it in this forum, there are many threads about it and you will get more information in those threads.
artit said:
I think the easiest way to recover it is to use LG mobile support tool. Please search for it in this forum, there are many threads about it and you will get more information in those threads.
Click to expand...
Click to collapse
Some 30mins ago I tried that! Twice! But after downloading 591mb software, it gets stucked and says USB disconnected And then when I re-connect the USB cord, that LG tool crashes Please help!
artit said:
I think the easiest way to recover it is to use LG mobile support tool. Please search for it in this forum, there are many threads about it and you will get more information in those threads.
Click to expand...
Click to collapse
Can I get your contact please? I need urgent help please WhatsaApp or Viber anything?:crying:
NidalPawne said:
Can I get your contact please? I need urgent help please WhatsaApp or Viber anything?:crying:
Click to expand...
Click to collapse
If LG tool disconnected, maybe you can try other usb port or try to run it again. Download and flashing may take about an hour or two. My skype id is artit.pu but it a little late here, maybe others may assist you.
You forgot to install a recovery after rooting? Shouldn't have done that. Recovery is a must.
LG tool is the only hope for you.
Hi!
I have LG L9 II (running 4.4.2) Today i installed LG G3 keyboard (file g3kb.apk).It was installed with no problem,but i cant see it on my phone.
Even when i go to keyboard seeting,i cant see it.There is only standard LG keyboard.
Can someone help me,so i can start using this keyboard?!
Thanx
Need more info
astronaud said:
Hi!
I have LG L9 II (running 4.4.2) Today i installed LG G3 keyboard (file g3kb.apk).It was installed with no problem,but i cant see it on my phone.
Even when i go to keyboard seeting,i cant see it.There is only standard LG keyboard.
Can someone help me,so i can start using this keyboard?!
Thanx
Click to expand...
Click to collapse
you can try to reboot the phone but it should not be a case
can you post the apk you have downloaded for testing ?
astronaud said:
Hi!
I have LG L9 II (running 4.4.2) Today i installed LG G3 keyboard (file g3kb.apk).It was installed with no problem,but i cant see it on my phone.
Even when i go to keyboard seeting,i cant see it.There is only standard LG keyboard.
Can someone help me,so i can start using this keyboard?!
Thanx
Click to expand...
Click to collapse
Thanx for the reply! I cant insert the file (it is 28.92 MB ).
Take this. Its working with LG L9-II
http://forum.xda-developers.com/showthread.php?t=2767660
UserXP_ said:
Take this. Its working with LG L9-II
http://forum.xda-developers.com/showthread.php?t=2767660
Click to expand...
Click to collapse
Could someone please tell me how can i get my phone into "RECOVERY MODE", so that i can then install cloudy /zip file keyboard?
astronaud said:
Could someone please tell me how can i get my phone into "RECOVERY MODE", so that i can then install cloudy /zip file keyboard?
Click to expand...
Click to collapse
If the phone can boot, the easiest way is:
Open command prompt where adb is located. Type
adb reboot recovery
--- or ---
download an app from store.
"Hard" way
When phone is off, hit and hold VolUp + Power. Release when white letters appears.
UserXP_ said:
If the phone can boot, the easiest way is:
Open command prompt where adb is located. Type
adb reboot recovery
--- or ---
download an app from store.
"Hard" way
When phone is off, hit and hold VolUp + Power. Release when white letters appears.
Click to expand...
Click to collapse
I acnt find this app in app store :cyclops:
astronaud said:
I acnt find this app in app store :cyclops:
Click to expand...
Click to collapse
Here
https://play.google.com/store/apps/details?id=com.siriusapplications.quickboot
No root acess
Thanx! But it doesnt work!When i run the app,it says-No root access! I really dont know what to do.
astronaud said:
Thanx! But it doesnt work!When i run the app,it says-No root access! I really dont know what to do.
Click to expand...
Click to collapse
Your phone is not root?
UserXP_ said:
Your phone is not root?
Click to expand...
Click to collapse
No it is not.How do i do that?
astronaud said:
No it is not.How do i do that?
Click to expand...
Click to collapse
Can not be done without root.
Search the forum about how to root.
UserXP_ said:
Can not be done without root.
Search the forum about how to root.
Click to expand...
Click to collapse
I screw up something!Now my stock (ANDROID 4.4.2) gone! I reset the phone to factory settings,but the errror (LG KEYBOARD HAS CRASHED) just continues poping out!How can i solve this?
astronaud said:
I screw up something!Now my stock (ANDROID 4.4.2) gone! I reset the phone to factory settings,but the errror (LG KEYBOARD HAS CRASHED) just continues poping out!How can i solve this?
Click to expand...
Click to collapse
Try this:
Go to Settings - Applications. Go to All.
Find the Keyboard app and click.
Check to see if there is a button "Uninstall updates" (or something similar) and click it.
UserXP_ said:
Try this:
Go to Settings - Applications. Go to All.
Find the Keyboard app and click.
Check to see if there is a button "Uninstall updates" (or something similar) and click it.
Click to expand...
Click to collapse
I didnt do that,but because i couldnt type-there was no keyboard visible,i reset phone to factory settings.I was hoping that this would solve my problem,but it didnt,because after reset,the LG (stock) keyboard doesnt work.It just pops out window (with message-LG keyboard has crashed).Is there any way that i could get back stock 4.4.2 keyboard on my phone?
astronaud said:
I didnt do that,but because i couldnt type-there was no keyboard visible,i reset phone to factory settings.I was hoping that this would solve my problem,but it didnt,because after reset,the LG (stock) keyboard doesnt work.It just pops out window (with message-LG keyboard has crashed).Is there any way that i could get back stock 4.4.2 keyboard on my phone?
Click to expand...
Click to collapse
The keyboard must be there (its in yours system - pop ups error messages).
Any way, download an other keyboard from store (use the PC) and set it as default.
Hi guys
So my Gear S (Korean version) has no Navigator pre-installed and which could not be installed on the Gear S using the Apps Manager for some unexplained reasons. Samsung might have locked the Korean version on the Navigator (here) map. My question is, what altrenative GPS Map app you have to install on the Gear S. I just need a simple Map with GPS capability that can run on my Gear without the need for assitance from the Mobile Device (for example my Mobile Device is left in the pocket or even at home, while I am out with the Gear).
Any suggestions?
Thanks
ongtuong said:
Hi guys
So my Gear S (Korean version) has no Navigator pre-installed and which could not be installed on the Gear S using the Apps Manager for some unexplained reasons. Samsung might have locked the Korean version on the Navigator (here) map. My question is, what altrenative GPS Map app you have to install on the Gear S. I just need a simple Map with GPS capability that can run on my Gear without the need for assitance from the Mobile Device (for example my Mobile Device is left in the pocket or even at home, while I am out with the Gear).
Any suggestions?
Thanks
Click to expand...
Click to collapse
Hello!
European version only here and there from the current gear. For me, this was also a problem, I put an EU version of Odin and flash works perfectly with the MAPPS Here!
oliolioli said:
Hello!
European version only here and there from the current gear. For me, this was also a problem, I put an EU version of Odin and flash works perfectly with the MAPPS Here!
Click to expand...
Click to collapse
Thanks for your information. Could you instruct me on how to do that? Is rooting the Gear S required? What are the steps needed?
Thanks alot.
ongtuong said:
Thanks for your information. Could you instruct me on how to do that? Is rooting the Gear S required? What are the steps needed?
Thanks alot.
Click to expand...
Click to collapse
No need root Gear S, this is official FW! Download fw
http://live.samsung-updates.com/index.php?device=SM-R750
then download odin 3.09, install Kies(USB driver) start Odin, press AP button, serch fw, press start. Re partition NOT selected!!! I use Romanian FW, I living in Hungary, 43 langue included, Here working!
---------- Post added at 03:31 PM ---------- Previous post was at 03:26 PM ----------
oliolioli said:
No need root Gear S, this is official FW! Download fw
http://live.samsung-updates.com/index.php?device=SM-R750
then download odin 3.09, install Kies(USB driver) start Odin, press AP button, serch fw, press start. Re partition NOT selected!!! I use Romanian FW, I living in Hungary, 43 langue included, Here working![/QUOTE
Oh and dowload mode switch on the watch, reboot, continuously press home button, press menu appear until download is displayed, and then continuously press, print download, then launch Odin
Click to expand...
Click to collapse
I have updated my old script to root ZVB as well as ZVA. This should solve issues that some people were having.
Just extract the zip file, run the .bat file and follow the instructions. Should be pretty simple. Let me know if you run into any problems.
Note: If you are having issues with the script hanging try unplugging your phone and plugging it back in. That should help.
Prerequisites:
Code:
adb debugging
LG drivers
Diag mode enabled ##diag (makes things easier but you can do without it, eg. manual reboots.)
Reserved
I have yet to be able to root my G3. The files get pushed over to the device but after reboot I have to manually boot it into download mode but then the device never gets recognized by the script.. I am running Windows 10 and wonder if that could have an effect on how the LG drivers work??
wpmetts said:
I have yet to be able to root my G3. The files get pushed over to the device but after reboot I have to manually boot it into download mode but then the device never gets recognized by the script.. I am running Windows 10 and wonder if that could have an effect on how the LG drivers work??
Click to expand...
Click to collapse
Yeah you might need to update your drivers in device manager once in download mode (searching automatically for the best driver should do the trick)
wpmetts said:
I have yet to be able to root my G3. The files get pushed over to the device but after reboot I have to manually boot it into download mode but then the device never gets recognized by the script.. I am running Windows 10 and wonder if that could have an effect on how the LG drivers work??
Click to expand...
Click to collapse
On line 27 in the bat file, change
Code:
adb reboot
to
Code:
adb reboot download
.
That worked for me.
Tried on Windows 10 and Windows 7 machines, After I manually put my phone into download mode (will not go into download mode automatically) the script detects my phone and I get "Author : blog.lvu.kr
SPECIAL COMMAND : ENTER, LEAVE
#"
Then the script just stops with nothing else happening, I've let it sit for 30 minutes thinking it was doing something but nothing. Any suggestions on what to do. My phone and sd card are encrypted, could this be causing the issue?
Out2kill said:
Tried on Windows 10 and Windows 7 machines, After I manually put my phone into download mode (will not go into download mode automatically) the script detects my phone and I get "Author : blog.lvu.kr
SPECIAL COMMAND : ENTER, LEAVE
#"
Then the script just stops with nothing else happening, I've let it sit for 30 minutes thinking it was doing something but nothing. Any suggestions on what to do. My phone and sd card are encrypted, could this be causing the issue?
Click to expand...
Click to collapse
Yes an encrypted phone/sdcard is probably the issue.
Sorry for the nooby question, but will autorec work after using this to root ZVB? I'm about to get a new device through insurance and world hate to only have root and not custom recovery.
golpeen420 said:
Sorry for the nooby question, but will autorec work after using this to root ZVB? I'm about to get a new device through insurance and world hate to only have root and not custom recovery.
Click to expand...
Click to collapse
no autorec doesn't work.. but you can use twrp manager (free on google play) or flashimg.
l33tlinuxh4x0r said:
no autorec doesn't work.. but you can use twrp manager (free on google play) or flashimg.
Click to expand...
Click to collapse
Oh wow, had no idea twrp manager supported this device now. That makes things so much easier. Cause I just ordered my new device today and it'll probably come stock with ZVB. Thanks for the info, really thought id be doomed to stock for a minute there.
Bought a G3 from someone off Craigslist last night & used this earlier today to gain root & it worked perfectly. Thanks for sharing!
So when I run the bat file, it just says waiting for device, but my device is plugged in and I know the drivers are installed, even installed them again to be sure and still nothing, and advice?
---------- Post added at 10:50 PM ---------- Previous post was at 10:34 PM ----------
nevermind, I got it
This method worked for me, thanks!!! @l33tlinuxh4x0r your the man, thanks for sharing your knowledge with the community and helping others. After trying several other root methods and having none of them work this root method actually worked! I have a LGLS990 LG G3 32GB SPRINT Shine Gold Smartphone. Goodbye Sprint / LG bloatwear and hello new xda gear!
One tip I can give is towards the end you need to unplug the USB cable, power off your phone and manually go into download mode again. The script doesn't prompt you to do that action but I figured it out when I kept getting stuck at around 90%. After I put my phone into download mode manually and reconnected the USB the root completed and SuperSU was installed. I am now running CloudyG3_2.5 and it's working flawlessly, thanks again.
i have tried this rooting method and it gets to the point after entering download mode the command script recognizes it goes to the next step then the command prompt just closes out.....what the heck is going on there? its done that repeatedly every time it hits that step
Jamesredmond82 said:
i have tried this rooting method and it gets to the point after entering download mode the command script recognizes it goes to the next step then the command prompt just closes out.....what the heck is going on there? its done that repeatedly every time it hits that step
Click to expand...
Click to collapse
I am having the same issue after entering download mode the command script recognizes it goes to the next step then the command prompt just closes out... any help will be appreciated.
Duplicate
---------- Post added at 03:58 PM ---------- Previous post was at 03:56 PM ----------
Jamesredmond82 said:
i have tried this rooting method and it gets to the point after entering download mode the command script recognizes it goes to the next step then the command prompt just closes out.....what the heck is going on there? its done that repeatedly every time it hits that step
Click to expand...
Click to collapse
You can use this method, i just rooted my LG G3 using mathod B on the link below.
http://forum.xda-developers.com/spri...stock-t3211878
hkhan1 said:
Duplicate
---------- Post added at 03:58 PM ---------- Previous post was at 03:56 PM ----------
You can use this method, i just rooted my LG G3 using mathod B on the link below.
http://forum.xda-developers.com/spri...stock-t3211878
Click to expand...
Click to collapse
your link didnt work
http://forum.xda-developers.com/spr...990-zvb-root-method-zvb-rooted-stock-t3211878
On this forum go to page number 5 for instructions.
Try this link, this should work.
Rooted a brand new LG G3 sold for Boost Mobile with this method. Lollipop v 5.0.1
twelfth said:
Rooted a brand new LG G3 sold for Boost Mobile with this method. Lollipop v 5.0.1
Click to expand...
Click to collapse
how exactly did you go about doing this?
please someone help me please my verge is bootlooping when i tried to install amazmod using pc after than the watch stopped responding and gets black and it is not rooted and the bootloader is locked i have tried many things non of them are working for me, there is no good source for verge i could find
if anyoune knows something about this please can help me?
xxxanmol said:
please someone help me please my verge is bootlooping when i tried to install amazmod using pc after than the watch stopped responding and gets black and it is not rooted and the bootloader is locked i have tried many things non of them are working for me, there is no good source for verge i could find
if anyoune knows something about this please can help me?
Click to expand...
Click to collapse
Uninstall it, and as a last chance, factory reset your watch using adb reboot wipe command. Another way, If the watch still connects to Amazfit app, unpair the watch while Bluetooth is connected, this will factory reset the watch too.
i solved it finally
Saratoga79 said:
Uninstall it, and as a last chance, factory reset your watch using adb reboot wipe command. Another way, If the watch still connects to Amazfit app, unpair the watch while Bluetooth is connected, this will factory reset the watch too.
Click to expand...
Click to collapse
the issue was with the drivers, i tried it on windows 10 and using all in one tools, installed twrp recovery then flash the rom through STOCK FIRMWARE INSTALLER it really was hard for me to do as lack of drivers and non detecting issues with windows 7 but windows 10 solved it at all finally
overall dont mess with an unrooted, locked bootloader watch or mobile
peace
xxxanmol said:
the issue was with the drivers, i tried it on windows 10 and using all in one tools, installed twrp recovery then flash the rom through STOCK FIRMWARE INSTALLER it really was hard for me to do as lack of drivers and non detecting issues with windows 7 but windows 10 solved it at all finally
overall dont mess with an unrooted, locked bootloader watch or mobile
peace
Click to expand...
Click to collapse
same in here... Amazfit Verge
When I run the command .. it doesn't start in fastboot
kyawzinooygn said:
same in here... Amazfit Verge
Click to expand...
Click to collapse
When I run the command adb shell reboot bootloader, it doesn't start in fastboot. How they solved it?
Can some one help me. I have used "All in one tool" and uninstalled some apks.. Seems they are important apps. Watch is now struck in boot loop that comes after amazfit A symbol. Using the all in one tool, I can again go to this fastboot mode as shown in screenshot. Not sure how to reinstall the uninstalled apks. I am not tech savvy. Can some one help me step by step
xxxanmol said:
i solved it finally
the issue was with the drivers, i tried it on windows 10 and using all in one tools, installed twrp recovery then flash the rom through STOCK FIRMWARE INSTALLER it really was hard for me to do as lack of drivers and non detecting issues with windows 7 but windows 10 solved it at all finally
overall dont mess with an unrooted, locked bootloader watch or mobile
peace
Click to expand...
Click to collapse
Can you help me with boot loop. Uninstalled some apks with the all in one tool (seems some important apks) and the amazfit verge is struck in boot loop as shown in image.
Saratoga79 said:
Uninstall it, and as a last chance, factory reset your watch using adb reboot wipe command. Another way, If the watch still connects to Amazfit app, unpair the watch while Bluetooth is connected, this will factory reset the watch too.
Click to expand...
Click to collapse
What is the remote wipe command for factory reset under fastboot mode? Thank you
Saratoga79 said:
Uninstall it, and as a last chance, factory reset your watch using adb reboot wipe command. Another way, If the watch still connects to Amazfit app, unpair the watch while Bluetooth is connected, this will factory reset the watch too.
Click to expand...
Click to collapse
What is the remote wipe command for factory reset under fastboot mode? Thank you