hi .I just bought an Xperia L (C2105); after few days of using and downloading guge number off apps it got freezed and when i tried to restar it my xperia shows nothing but the Sony Logo until the battery drains so i tried using flashtool but when i select the firmware it says this
x1.this bundle is not valide
x2.thisbundle is not valide
.......
.......
so i searshed and found that there is another tool from sonymobile called emma to flash sony devices and i downloaded it but whenever i connect the phone to the laptop it says this device is locked and cannot be flashed try to unlock the bootloader
so again i went to flashtool and pressed unlock bootloader and connected the Xperia L but after a few seconds the flashtool said that my phone bootloader cannot be officialy unlocked. and i need to check uknown sources and debug mode but thats clearely impossible as the phone is stuck
so i went to pc companion and pressed update service and connected the device and it detected it as soon as i plug the usb cable but it says that i need to update my pc companion and get the version suitable for my device which im sur i downloaded the exact vesion for the xperia L from the sony mobile website
So basicaly non of the tree programmes allow me to flash my xperia L and now i dont know what to do im stuck with an unusable phone .
is there something im missing here flashing a device should be a peace of cake but this device is a hell of headacke
any help please
Related
I recently tried to install cm7 and now i ma stuck at my sony ericsson start screen and i cant return to recovery can someone please help me
I think you brick the phone, try the repair procedure with pc companion, it will reset the default factory value... sad but worked on my xperia x8
Pull out your battery and then reinsert and use buttons to go to recovery ( volume down, home n power)
Sent from my LG-P500 using xda premium
JollyKing said:
I recently tried to install cm7 and now i ma stuck at my sony ericsson start screen and i cant return to recovery can someone please help me
Click to expand...
Click to collapse
if you have an X10mini (notPRO) and tried to install CM7 (i.e. miniCM7-2.1.3 or official CM)
you obviously forgot to read the first lines of my FAQ, so do it, and then, you'll have fastly working phone
Im not getting back into recovery at all :/ jus keeps rebooting to sony ericson screen
evil_chris said:
I think you brick the phone, try the repair procedure with pc companion, it will reset the default factory value... sad but worked on my xperia x8
Click to expand...
Click to collapse
I am Not seeing A repair function with the pc companion???
JollyKing said:
I am Not seeing A repair function with the pc companion???
Click to expand...
Click to collapse
if you really want to use miniCM7 and have your BL unlocked, just flash nAa's kernel with flashtool
if not, you absolutely need to start from the beginning using SEUS, sorry (post 3 of my FAQ, you'll get links to debrick )
and read carefully everything before making mistakes
I was in the same situation. I installed minicm7 pro v20 and then it entered infinity loopboot. With luck, i pressed the menu button for some seconds just before "sony ericssom" appear and then i entered in the CWM 3.2 menu, where i did a restore.
JollyKing said:
I am Not seeing A repair function with the pc companion???
Click to expand...
Click to collapse
the repair funcition is with the phone unpluged go to Pc companion > Suport zone > update your software > repair phone> then just folow what it say
try sony Ericsson update service it works for me :L
I have the same condition with neo V. PLS HELP ME TOO !!
My neo V has stucked at begining sony ericsson logo. i cannot go into recovery mod. i can only connect it to my pc in flashboot or fastboot way. I had rooted it and installed CWM nAr's... and the worst thing is when i connect to flashtool it now say that usb debugging is disabled... ALL THIS HAPPENED AFTER I FLASHED [CWM][LOCK BOOTLOADER] 4.0.2.A.0.62 Generic Firmware + Root + Busybox + CWM MT15/MT11 LINK TO POST http://forum.xda-developers.com/showthread.php?t=1446308
Sturdy_99 said:
My neo V has stucked at begining sony ericsson logo. i cannot go into recovery mod. i can only connect it to my pc in flashboot or fastboot way. I had rooted it and installed CWM nAr's... and the worst thing is when i connect to flashtool it now say that usb debugging is disabled... ALL THIS HAPPENED AFTER I FLASHED [CWM][LOCK BOOTLOADER] 4.0.2.A.0.62 Generic Firmware + Root + Busybox + CWM MT15/MT11 LINK TO POST http://forum.xda-developers.com/showthread.php?t=1446308
Click to expand...
Click to collapse
Don't worry if the Flashtool says 'USB debugging is disabled' if you enabled it before flashing it,it is because the Flashtool got a problem with connecting to your USB debugging feature in your phone...
About the bootloop,it is considered a softbrick as it can be fix as long as you can connect your phone to your PC in Flashmode
How to recover your phone back :
1.Go to wotanserver
2.Register and verify email if requested
3.Download wotanclient in the website
4.Download the needed driver in the website
5.Make sure you installed the thing that is needed thing before proceed
6.Open wotanclient
7.It will now start in Startup tab,wait for it if your wotanclient is auto updating
8.Now,after your wotanclient is updated,it will now currently in the Phone detection tab and asking you to connect your phone service button (for Xperia Neo V,I think it is back button)
9.Press and hold the service button and connect your phone to computer using USB
10.It will now connecting to your phone,and go into Phone setting tab
11.Enter your registered account and password,and click the 'Update' option and you should have a 1 credit result and something like that
12.After that,it will go to the setting tab,choose what your phone model is,and choose which phone firmware would you like to recovered into your phone
13.Choose your country Generic for the best result for your phone after recover your phone
14.Now,it will now download the file for your phone,it should take around 1-2 hours
15.After downloading,it will flash the phone automatically
16.After the phone got flashed,it will ask you to disconnect your USB and reboot your phone
17.Reboot your phone,and it will take sometime for the phone to create cache for your new system
18.Set your phone setting like the first time you buy your phone
19.?????????????
20.PROFIT
If you think my post help you,don't forget to click the Thanks button
I wil try it out.
THANKS FOR THE SOLUTION. I will try it out. Hope it WORKS...
Dude getting stuck at phone detection
i rooted my x10 mini and flashed it it stuck at se logo page.
wat to do now
i cannot use pc campanion without going to menu screen
i hav back up of previous os by using xrecovery wat shall i do
okey i unlocked the bootloade with this tut: http://forum.xda-developers.com/showthread.php?t=1254225 then i had "no service" on my phone (i think beacuse i used the msm7227_Setool2.cmd). first i thought it might be an problme with the software so i installed MiniCM7-2.1.3 because the bootloader was unlocked. but htat didnt fix it. but now i accidentally flashed it with the stock kernel. it wont boot and it wont go into flashmode. so can you plz give me any suggestions how to solve this problem? thanks!
sorry if i made any mistakes im new to this forum
it just shows the sony ericsson logo
have you tried pc companion and update service it may get your phone working.
yes but it says i have to activate the usb on it to connect/use it with pc companion. and as i doesnt boot, i cant do this.
Have you tried se update service as you say your phone is not booting.
If update service can't do the magic then you will have to go for flashing tool ....
i cant get into flashmode (when the green led is on). so update service and pc companion dont detect it
now use flashtool and follow all the instruction on this link below
http://forum.xda-developers.com/showthread.php?t=825664
ok im trying this one
okey im desperate here, maybe you posted a wrong link or what ever. i tried to flash with flashtool. i even created a bundle. but is still not recognising it in flash mode.
okey solved it
took the battery cable out pushed the back button and put the cable back in place then i plugged the usb cable in and it wet into flashmode
finally i just relocked my bootloader with s1tool
thanks for your help
Hello everyone
As stated on the title I have a dead xperia ray that when you connected to the pc the it gets identified as "QHSUSB_DLOAD"
before being totally dead it kept restarting from the logo sony to xperia logo and again and again on a loop.
Then next day,dead and that appears (phone wasn't in my possesion in between,but the guy that had it says he didnt do anything at all,didnt try anything,it was dead when it was given)
I tried the official pc updater nothing,tried flashing it with flashtools nothing again.
Any suggestion is welcome.
Sorapak said:
Hello everyone
As stated on the title I have a dead xperia ray that when you connected to the pc the it gets identified as "QHSUSB_DLOAD"
before being totally dead it kept restarting from the logo sony to xperia logo and again and again on a loop.
Then next day,dead and that appears (phone wasn't in my possesion in between,but the guy that had it says he didnt do anything at all,didnt try anything,it was dead when it was given)
I tried the official pc updater nothing,tried flashing it with flashtools nothing again.
Any suggestion is welcome.
Click to expand...
Click to collapse
Is the bootloader unlocked?
If the bootloader is unlocked, try to connect in fastboot mode and flash a kernel. If it not working, try to connect via tespoint mod (device will be identified as QHSUSB_DLOAD) and rewrite the S1boot with S1Tool. If it not works, contact someone who has the SeTool Box, you will pay some bucks to get alive your Xperia Ray (rewriting your S1boot too). If nothing works, consider your Xperia Ray is really dead. Cheers.
hi
Sorapak said:
Hello everyone
As stated on the title I have a dead xperia ray that when you connected to the pc the it gets identified as "QHSUSB_DLOAD"
before being totally dead it kept restarting from the logo sony to xperia logo and again and again on a loop.
Then next day,dead and that appears (phone wasn't in my possesion in between,but the guy that had it says he didnt do anything at all,didnt try anything,it was dead when it was given)
I tried the official pc updater nothing,tried flashing it with flashtools nothing again.
Any suggestion is welcome.
Click to expand...
Click to collapse
hi bro .... i can help you in getting your device back ... contact me on gtalk : [email protected]
hi everyone
i have a problem as i said at the title
i reset my phone with the pc companion than i flash the wrong rom which is device x10 and version v1
so it didnt work . Sola got stuck in bootlop
flashtool doesnt work. i tried to repair with pc companion as you guess it didnt work
fashtool said device disconnected, be sure about to mtp mode and start with the debugging off
ı hope somebody help me
...
Turn off ur device, remove battery or press power+volume up 5 sec
Download right ftf using XperiaFirm or whatever u want
Then flash, it's simple like 1+1
Hello everyone,
I have a xperia z2.
I was out of battery (actually it was 5%) and I turned off my phone and then i fully charged the phone.
When I tried to turn on the phone the phone stuck at sony logo.it shows sony logo and powered by android and it shows same things again and again.
The phone is locked and no usb debug.everything is original.
I can get into flashmode but flashtool gives loader.sin error at the first time and second time it stuck at reading device info
.I tried lots of versions of Flashtool
Pc companion doesn't detect my phone.
So is this phone hard bricked?
What should I do?
Again, never mind that the device is not recognized.
It is not required, use the programs Pc Companion or Xperia Copmanion correctly.
Turn off the phone and see the video:
http://forum.xda-developers.com/showpost.php?p=67285626&postcount=15
Monipeev said:
Again, never mind that the device is not recognized.
It is not required, use the programs Pc Companion or Xperia Copmanion correctly.
Turn off the phone and see the video:
http://forum.xda-developers.com/showpost.php?p=67285626&postcount=15
Click to expand...
Click to collapse
I tried this solution. I use the program correctly but when i connect the phone in flashmode it doesn't go to next step otomatically