[Q] x10 mini broken - Sony Ericsson XPERIA X10 Mini

okey i unlocked the bootloade with this tut: http://forum.xda-developers.com/showthread.php?t=1254225 then i had "no service" on my phone (i think beacuse i used the msm7227_Setool2.cmd). first i thought it might be an problme with the software so i installed MiniCM7-2.1.3 because the bootloader was unlocked. but htat didnt fix it. but now i accidentally flashed it with the stock kernel. it wont boot and it wont go into flashmode. so can you plz give me any suggestions how to solve this problem? thanks!
sorry if i made any mistakes im new to this forum
it just shows the sony ericsson logo

have you tried pc companion and update service it may get your phone working.

yes but it says i have to activate the usb on it to connect/use it with pc companion. and as i doesnt boot, i cant do this.

Have you tried se update service as you say your phone is not booting.
If update service can't do the magic then you will have to go for flashing tool ....

i cant get into flashmode (when the green led is on). so update service and pc companion dont detect it

now use flashtool and follow all the instruction on this link below
http://forum.xda-developers.com/showthread.php?t=825664

ok im trying this one

okey im desperate here, maybe you posted a wrong link or what ever. i tried to flash with flashtool. i even created a bundle. but is still not recognising it in flash mode.

okey solved it
took the battery cable out pushed the back button and put the cable back in place then i plugged the usb cable in and it wet into flashmode
finally i just relocked my bootloader with s1tool
thanks for your help

Related

[Q] Unbricking x10 mini pro

Hey guys
I have the problem that my x10 mini pro has stuck in xrecovery while flashing a rom and now ich can't flash it anymore because no pc recognices it
Seus and binarys flash tool don't see my phone so I can not flash it
but I can enter flash mode
please help
in seus start support zone click repair and go further till it shows up that you need turn off your phone and pluging usb with pressed back button.
but my pc and others don't recognice my x10 mini pro...
so seus does not see it
just try those steps first :
1.unlug your phone from pc and turn phone off
2.start seus selsct support zone, click repair phone select continue then next
3.your pc will start prepaering for update
4.select mini pro from list
5.conect usb to pc and then press and hold back buton and conect usb onto phone
6.then it must start dowloading update and repair phone
if still dosent work reinstall phone drivers on your pc and try again.
There is no support zone anywere -.-
drivers are installed correct casuse I flashed it before with no probs
do you have this?
Edit: sory my bad install Sony Ericsson PC Companion from oficial site if you dont have it
I have found it but it still does not work
my pc does net see my phone I don't even hear the sound that it is plugged in to my pc
that is my problem pc companion and seus and binarys flasher don't see it...
is there a other way to flash it?
or is there a thing like the usb brick thing like the galaxy s ?
repeat those steps above with Sony Ericsson PC Companion.it need to work.if still not then are te drivers on pc messed up beacuse this is the only way to fix phone.or try flash tool.
for any other ways i dont know i havent got that kind of problem.
I have tried it several times but every time the same result...
my pc does not se my phone (no sound that it is plugged in)
so I can not flash it anymore...
now I have a full Brick -.-
you cant brick your phone so muct that you cant fix it.
if your pc doesnt recognize your phone then is problem on your pc not phone.
so just for try reinstall your drivers and then you will se
EDIT: can you go into xrecovery and use it?
I have tried it on several pc's and I installed my drivers to flash it correct...
I had done this before and it worked
my pc's havent changed since then...
but after I flashed slades froyo once again (had random reboots, made wipe and tried to install again) it stuck while flashing in xrecovery and the only thing I could do is to put the battery out...
And now it won't be seen by any pc...
and not form seus, pc companion, and binarys flash tool...
then i dont know what is going on with your phone beacuse no one had this kind of problem.
can turn on your phone is there any sing if it's working?
I can turn it on and it repeats booting...
classic bootloop but nothing else no xrec and not even charging -.-
and it is not seen by any pc -.-
well your phone is still working this is good sing.
pc will not recignized your phone when is on boot.
but is strange why is not recognized in flash mode.
maybe you could try with hard reset and then it could be recognized.
hard reset is on the right site of camera over sim try with that
can you post a picture of that?
and are you sure that this is a reset button?
well some one on forum mentioned that.
hmm I tried it but nothing happened -.-
an it does not feel like a kind of button...
guess I need to send it back to se...
and wait 3 weeks till i get it back
USB maybe
Sent from my U20i using XDA App
yes it is the usb
but i don't have a clue how to fix it
there is nothing broken but it doesnt work no more

[Q] I am Stuck At Sony Ericcson Screen on my x10mini HELP NEEDED!!!

I recently tried to install cm7 and now i ma stuck at my sony ericsson start screen and i cant return to recovery can someone please help me
I think you brick the phone, try the repair procedure with pc companion, it will reset the default factory value... sad but worked on my xperia x8
Pull out your battery and then reinsert and use buttons to go to recovery ( volume down, home n power)
Sent from my LG-P500 using xda premium
JollyKing said:
I recently tried to install cm7 and now i ma stuck at my sony ericsson start screen and i cant return to recovery can someone please help me
Click to expand...
Click to collapse
if you have an X10mini (notPRO) and tried to install CM7 (i.e. miniCM7-2.1.3 or official CM)
you obviously forgot to read the first lines of my FAQ, so do it, and then, you'll have fastly working phone
Im not getting back into recovery at all :/ jus keeps rebooting to sony ericson screen
evil_chris said:
I think you brick the phone, try the repair procedure with pc companion, it will reset the default factory value... sad but worked on my xperia x8
Click to expand...
Click to collapse
I am Not seeing A repair function with the pc companion???
JollyKing said:
I am Not seeing A repair function with the pc companion???
Click to expand...
Click to collapse
if you really want to use miniCM7 and have your BL unlocked, just flash nAa's kernel with flashtool
if not, you absolutely need to start from the beginning using SEUS, sorry (post 3 of my FAQ, you'll get links to debrick )
and read carefully everything before making mistakes
I was in the same situation. I installed minicm7 pro v20 and then it entered infinity loopboot. With luck, i pressed the menu button for some seconds just before "sony ericssom" appear and then i entered in the CWM 3.2 menu, where i did a restore.
JollyKing said:
I am Not seeing A repair function with the pc companion???
Click to expand...
Click to collapse
the repair funcition is with the phone unpluged go to Pc companion > Suport zone > update your software > repair phone> then just folow what it say
try sony Ericsson update service it works for me :L
I have the same condition with neo V. PLS HELP ME TOO !!
My neo V has stucked at begining sony ericsson logo. i cannot go into recovery mod. i can only connect it to my pc in flashboot or fastboot way. I had rooted it and installed CWM nAr's... and the worst thing is when i connect to flashtool it now say that usb debugging is disabled... ALL THIS HAPPENED AFTER I FLASHED [CWM][LOCK BOOTLOADER] 4.0.2.A.0.62 Generic Firmware + Root + Busybox + CWM MT15/MT11 LINK TO POST http://forum.xda-developers.com/showthread.php?t=1446308
Sturdy_99 said:
My neo V has stucked at begining sony ericsson logo. i cannot go into recovery mod. i can only connect it to my pc in flashboot or fastboot way. I had rooted it and installed CWM nAr's... and the worst thing is when i connect to flashtool it now say that usb debugging is disabled... ALL THIS HAPPENED AFTER I FLASHED [CWM][LOCK BOOTLOADER] 4.0.2.A.0.62 Generic Firmware + Root + Busybox + CWM MT15/MT11 LINK TO POST http://forum.xda-developers.com/showthread.php?t=1446308
Click to expand...
Click to collapse
Don't worry if the Flashtool says 'USB debugging is disabled' if you enabled it before flashing it,it is because the Flashtool got a problem with connecting to your USB debugging feature in your phone...
About the bootloop,it is considered a softbrick as it can be fix as long as you can connect your phone to your PC in Flashmode
How to recover your phone back :
1.Go to wotanserver
2.Register and verify email if requested
3.Download wotanclient in the website
4.Download the needed driver in the website
5.Make sure you installed the thing that is needed thing before proceed
6.Open wotanclient
7.It will now start in Startup tab,wait for it if your wotanclient is auto updating
8.Now,after your wotanclient is updated,it will now currently in the Phone detection tab and asking you to connect your phone service button (for Xperia Neo V,I think it is back button)
9.Press and hold the service button and connect your phone to computer using USB
10.It will now connecting to your phone,and go into Phone setting tab
11.Enter your registered account and password,and click the 'Update' option and you should have a 1 credit result and something like that
12.After that,it will go to the setting tab,choose what your phone model is,and choose which phone firmware would you like to recovered into your phone
13.Choose your country Generic for the best result for your phone after recover your phone
14.Now,it will now download the file for your phone,it should take around 1-2 hours
15.After downloading,it will flash the phone automatically
16.After the phone got flashed,it will ask you to disconnect your USB and reboot your phone
17.Reboot your phone,and it will take sometime for the phone to create cache for your new system
18.Set your phone setting like the first time you buy your phone
19.?????????????
20.PROFIT
If you think my post help you,don't forget to click the Thanks button
I wil try it out.
THANKS FOR THE SOLUTION. I will try it out. Hope it WORKS...
Dude getting stuck at phone detection
i rooted my x10 mini and flashed it it stuck at se logo page.
wat to do now
i cannot use pc campanion without going to menu screen
i hav back up of previous os by using xrecovery wat shall i do

[Q] X10, no recovery no ROM stuck at boot screen

I'm helping my friend here
He did a full wipe on his X10, and now, his phone cannot boot, and neither can it enter recovery. My Mac can't even detect it(adb and fastboot cannot detect it).
Help :/
tlkh said:
I'm helping my friend here
He did a full wipe on his X10, and now, his phone cannot boot, and neither can it enter recovery. My Mac can't even detect it(adb and fastboot cannot detect it).
Help :/
Click to expand...
Click to collapse
Repair it using PCCompanion
Adding to that, you may also find it easier to do it on a windows-based pc.
This is caused by did the full wipe and then reboot the phone. At this time, there is no system files in the phone so it won't boot. Need to repair using PC Companion or SEUS or Flash Tool.
Sent from Xperia X10 Self-modded
Hi,I am this friend who cleverly full wiped with xRecovery.However, my windows7 computer still cant detect my phone,and proves to be a problem.Anyone can help me by giving me a step by step in getting my phone back into flashable mode? or help fix this?
Same kind of problem here with a friend's phone I usualy use a htc desire.
He updated hi X10i (stock, not rooted), since then there's no boot, only exclamation mark for a few secs, and no usb.
I tried "<="+usb/power on -> exclamation mark, no recovery.
It's not detected in any way by my pc (installed sony tools etc...), windows or linux (no kernel message at all), same usb port, same cable, my htc phone works in both.
What can I do ?
Thanks !
You have to connect the phone in flashmode...
Use the link "How to use PC Companion" in my signature
I had the same problem a while ago. Phone not detected by PCC/flashtool, SEUS, no xrecovery... started to panic
Then i read a post here somewhere about wotansever - its free but you gotta sign up.
http://www.wotanserver.com/en/
It detected my phone where all others failed and flashed it back to stock rom.
Try it - it works
Once you get it working again heres a great guide for flashtool (flashing/rooting/BL unlocking)
http://forum.xda-developers.com/showthread.php?t=928343
mugsy730 said:
I had the same problem a while ago. Phone not detected by PCC/flashtool, SEUS, no xrecovery... started to panic
Then i read a post here somewhere about wotansever - its free but you gotta sign up.
http://www.wotanserver.com/en/
It detected my phone where all others failed and flashed it back to stock rom.
Try it - it works
Once you get it working again heres a great guide for flashtool (flashing/rooting/BL unlocking)
http://forum.xda-developers.com/showthread.php?t=928343
Click to expand...
Click to collapse
Thank you, i read a little about this but i'm affraid my problem is "before" any software since my phone is not detected by my system, neither running windows 7 nor linux.
It does not turn on when pushing "<-" and pluging usb.
9andar said:
You have to connect the phone in flashmode...
Use the link "How to use PC Companion" in my signature
Click to expand...
Click to collapse
hey i tried to installed the rom you are currently using and i have my bootloader locked and when i was promted to setup the installation the touch on my phone was not responding and it seems that i just clicked on next and also appears that because of that my phone not is just stuck at logo, hope you can give a tip on how to instal this rom

SE WT19i won't start

Hi all. I have problem with my se wt19i. I can't turn on my phone. Led won't light when charge or go to flashmode. Nothing work. When i connect phone with pc it says that not recognize. After few minutes it connect and i see my phone on pc but screen dont work. Please help and sorry for my bad english.
What did you do?
muszka1995 said:
Hi all. I have problem with my se wt19i. I can't turn on my phone. Led won't light when charge or go to flashmode. Nothing work. When i connect phone with pc it says that not recognize. After few minutes it connect and i see my phone on pc but screen dont work. Please help and sorry for my bad english.
Click to expand...
Click to collapse
If your phone gets connected to pc in flashmode, try reflashing the stock ROM.....
Or else try "Repair your phone" option in Sony PC companion..
send it to service center if your device still have warranty
Try once
I had a similar problem when i flashed a custom rom which didnt support locked bootloader.
Try flashing the stock rom in flash tool.
I can say that this will correct the problem.
And dont send it to sony service center if u have flashed a custom rom.
Press Thanks if helped
try using Sony PC companion to recover ur phone
sony ericsson wt19i don't turning on but charging indicating .what is the solution

[Q] xperia sola bricked and stıck in bootloop and locked bootloader

hi everyone
i have a problem as i said at the title
i reset my phone with the pc companion than i flash the wrong rom which is device x10 and version v1
so it didnt work . Sola got stuck in bootlop
flashtool doesnt work. i tried to repair with pc companion as you guess it didnt work
fashtool said device disconnected, be sure about to mtp mode and start with the debugging off
ı hope somebody help me
...
Turn off ur device, remove battery or press power+volume up 5 sec
Download right ftf using XperiaFirm or whatever u want
Then flash, it's simple like 1+1

Categories

Resources