Hey guys
I have the problem that my x10 mini pro has stuck in xrecovery while flashing a rom and now ich can't flash it anymore because no pc recognices it
Seus and binarys flash tool don't see my phone so I can not flash it
but I can enter flash mode
please help
in seus start support zone click repair and go further till it shows up that you need turn off your phone and pluging usb with pressed back button.
but my pc and others don't recognice my x10 mini pro...
so seus does not see it
just try those steps first :
1.unlug your phone from pc and turn phone off
2.start seus selsct support zone, click repair phone select continue then next
3.your pc will start prepaering for update
4.select mini pro from list
5.conect usb to pc and then press and hold back buton and conect usb onto phone
6.then it must start dowloading update and repair phone
if still dosent work reinstall phone drivers on your pc and try again.
There is no support zone anywere -.-
drivers are installed correct casuse I flashed it before with no probs
do you have this?
Edit: sory my bad install Sony Ericsson PC Companion from oficial site if you dont have it
I have found it but it still does not work
my pc does net see my phone I don't even hear the sound that it is plugged in to my pc
that is my problem pc companion and seus and binarys flasher don't see it...
is there a other way to flash it?
or is there a thing like the usb brick thing like the galaxy s ?
repeat those steps above with Sony Ericsson PC Companion.it need to work.if still not then are te drivers on pc messed up beacuse this is the only way to fix phone.or try flash tool.
for any other ways i dont know i havent got that kind of problem.
I have tried it several times but every time the same result...
my pc does not se my phone (no sound that it is plugged in)
so I can not flash it anymore...
now I have a full Brick -.-
you cant brick your phone so muct that you cant fix it.
if your pc doesnt recognize your phone then is problem on your pc not phone.
so just for try reinstall your drivers and then you will se
EDIT: can you go into xrecovery and use it?
I have tried it on several pc's and I installed my drivers to flash it correct...
I had done this before and it worked
my pc's havent changed since then...
but after I flashed slades froyo once again (had random reboots, made wipe and tried to install again) it stuck while flashing in xrecovery and the only thing I could do is to put the battery out...
And now it won't be seen by any pc...
and not form seus, pc companion, and binarys flash tool...
then i dont know what is going on with your phone beacuse no one had this kind of problem.
can turn on your phone is there any sing if it's working?
I can turn it on and it repeats booting...
classic bootloop but nothing else no xrec and not even charging -.-
and it is not seen by any pc -.-
well your phone is still working this is good sing.
pc will not recignized your phone when is on boot.
but is strange why is not recognized in flash mode.
maybe you could try with hard reset and then it could be recognized.
hard reset is on the right site of camera over sim try with that
can you post a picture of that?
and are you sure that this is a reset button?
well some one on forum mentioned that.
hmm I tried it but nothing happened -.-
an it does not feel like a kind of button...
guess I need to send it back to se...
and wait 3 weeks till i get it back
USB maybe
Sent from my U20i using XDA App
yes it is the usb
but i don't have a clue how to fix it
there is nothing broken but it doesnt work no more
Related
Hi Guys!
My original x10a was sold to a close friend of mine, whom accidently accessed the xRecovery menu, and select to delete the SYSTEM and DATA partition.
Now he is stuck on a endless loop of being on the Sony Ericsson boot logo text screen.
Only way to power off the phone is to physically remove the battery.
Anyways, I am trying to complete a factory reset with the 2.1 firmware, so far, I am out of luck.
I have WIN 7 x64 running, with both 32-bit 64-bit JAVA SE and development
I also have installed Android SDK, wit all the possible packages, including USB Driver Revision 4
I also have Flashtool downloaded from this website, which included the SEMC drivers.
Problem is...I cant get the computer to recognize the phone at all.
I tried even Sony Update Software as well as Companion software, with no luck.
I am physically in flash mode ... solid green LED, but the computer is not detecting the phone at all.
Flashtool is advising to connect my Xperia phone, when clearly my phone has the solid green LED with black screen (hold down back button and connecting the USB)
First I thought it was the cable, which I replaced with a OEM one, still no luck.
I removed the SD card, 16gb from the phone, and connected through my computer for flash memory sticks drive (all in one), and the card was blank.
I am presuming my friend would have deleted SDCARD data as well
So, now I am stuck in a limbo, how do I fix this?
just to give you hope, if you see the se logo that means that your phone isn't bricked.
it's probably some driver that's not installed properly. I'll let someone with real knowledge explain whatto do.
Something like this happened to me. I know it sounds stupid, but have you tried rebooting your computer?? I did that, and it worked again.
Uninstall SEUS,PC Companion and then reboot the PC.
Then download SEUS and install it. Start SEUS , go through the process. It should detect it now.
Can you access xrecovery? If you Can, download a custom ROM, follow the instructions to install.
Don't forget to extract your ROM to sdcard.
Sent from my X10 using XDA App
Hi All!
Thanks for the input, I do appreciate it.
I am at work right now, but will try it this evening and let you know how it proceeds.
Just as an FYI, I did restart my computer once the Java, SE Companion, SEUS, and Google SDK were installed, still had no luck, but I will try again
To access the xRecovery, it is pressing back button couple of times right?
But the SD is blank, should I use a PC to initialize the SDcard with Xrecovery and everything?
Try this steps...
1-Download a custom ROM to your sdcard and extract. (Use your PC)
2-Reboot your x10 and press a back buton many times.
3-Make following in Xrecovery
*Factory reset
*Wipe cache partition
*Wipe dalvik cache
*Wipe Battery stats
*Install custom ZIP
*Reboot
*Let the phone 5 minutes alone please...
Sent from my X10 using XDA App
you gotta uninstall seus and pc companion, and uninstall all the x10 drivers, then reinstall seus and pc companion
Hi why don't you use flashtool to flash a new rom? I had read in somewhere else here about this tool and seems to work flawlessly to recover bricked xperia..
End of Life ....
Hi Guys!
Sorry for the late reply,
Been extremely busy with work.
Anyways, it seems I got myself a malfunctioning motherboard or broken/damaged usb connector.
Thus, I can't do anything, it is going to cost me $150 bucks to repair.
I cant get into flash mode, as soon as I do that (the green led), windows states that USB device has malfunctioned and my Xperia continuous to the boot logo screen and stuck there.
I tried just about everything, unless anyone else knows better way?
Just to prove the USB connector is damaged, the wall-charger is not even working when the USB is connected
This sounds really extreme. Can you charge the phone? Can you connect the phone to the computer and get a solid green light - ie - flash mode?
I've encountered a similar problem, the battery is completely drained, so much so that it can not connect to the wall charger, can not connect to anything at all.. just gives three flashes of red led then stops.
The only solution is to charge the battery for a few minutes in another X10 and then with enough power, get back into the phone for long enough to re-establish charge being sent to the battery.
IF you have charge and are able to get to the white SE logo, you just need to use the SEUS software to force restore of the stock firmware.
karthigan said:
Just as an FYI, I did restart my computer once the Java, SE Companion, SEUS, and Google SDK were installed, still had no luck, but I will try again
Click to expand...
Click to collapse
Just one more question, have you tried changing the USB port? Sometimes the device ID gets messed up and the only way is to switch to another USB port and make sure the phone connects to the computer with the USB cable and that you have a device id.
EDIT: Worth looking into these two threads;
http://forum.xda-developers.com/showthread.php?t=1034997
http://forum.xda-developers.com/showthread.php?t=1032864
Problem is I am not sure what your exact problem is as I would like to help more!
The newest version of Flash Tool has drivers package included, it worked for me without installing (or reinstalling) SEUS or PC Companion. Look for a 'drivers' subfolder inside the extracted files.
Can you charge the phone?
My USB port has completely died and I've not a working phone even, so I'm unable to work on custom kernels or anything - I don't have an X10 any-more until this USB port on the phone gets re-soldered
okey i unlocked the bootloade with this tut: http://forum.xda-developers.com/showthread.php?t=1254225 then i had "no service" on my phone (i think beacuse i used the msm7227_Setool2.cmd). first i thought it might be an problme with the software so i installed MiniCM7-2.1.3 because the bootloader was unlocked. but htat didnt fix it. but now i accidentally flashed it with the stock kernel. it wont boot and it wont go into flashmode. so can you plz give me any suggestions how to solve this problem? thanks!
sorry if i made any mistakes im new to this forum
it just shows the sony ericsson logo
have you tried pc companion and update service it may get your phone working.
yes but it says i have to activate the usb on it to connect/use it with pc companion. and as i doesnt boot, i cant do this.
Have you tried se update service as you say your phone is not booting.
If update service can't do the magic then you will have to go for flashing tool ....
i cant get into flashmode (when the green led is on). so update service and pc companion dont detect it
now use flashtool and follow all the instruction on this link below
http://forum.xda-developers.com/showthread.php?t=825664
ok im trying this one
okey im desperate here, maybe you posted a wrong link or what ever. i tried to flash with flashtool. i even created a bundle. but is still not recognising it in flash mode.
okey solved it
took the battery cable out pushed the back button and put the cable back in place then i plugged the usb cable in and it wet into flashmode
finally i just relocked my bootloader with s1tool
thanks for your help
I'm helping my friend here
He did a full wipe on his X10, and now, his phone cannot boot, and neither can it enter recovery. My Mac can't even detect it(adb and fastboot cannot detect it).
Help :/
tlkh said:
I'm helping my friend here
He did a full wipe on his X10, and now, his phone cannot boot, and neither can it enter recovery. My Mac can't even detect it(adb and fastboot cannot detect it).
Help :/
Click to expand...
Click to collapse
Repair it using PCCompanion
Adding to that, you may also find it easier to do it on a windows-based pc.
This is caused by did the full wipe and then reboot the phone. At this time, there is no system files in the phone so it won't boot. Need to repair using PC Companion or SEUS or Flash Tool.
Sent from Xperia X10 Self-modded
Hi,I am this friend who cleverly full wiped with xRecovery.However, my windows7 computer still cant detect my phone,and proves to be a problem.Anyone can help me by giving me a step by step in getting my phone back into flashable mode? or help fix this?
Same kind of problem here with a friend's phone I usualy use a htc desire.
He updated hi X10i (stock, not rooted), since then there's no boot, only exclamation mark for a few secs, and no usb.
I tried "<="+usb/power on -> exclamation mark, no recovery.
It's not detected in any way by my pc (installed sony tools etc...), windows or linux (no kernel message at all), same usb port, same cable, my htc phone works in both.
What can I do ?
Thanks !
You have to connect the phone in flashmode...
Use the link "How to use PC Companion" in my signature
I had the same problem a while ago. Phone not detected by PCC/flashtool, SEUS, no xrecovery... started to panic
Then i read a post here somewhere about wotansever - its free but you gotta sign up.
http://www.wotanserver.com/en/
It detected my phone where all others failed and flashed it back to stock rom.
Try it - it works
Once you get it working again heres a great guide for flashtool (flashing/rooting/BL unlocking)
http://forum.xda-developers.com/showthread.php?t=928343
mugsy730 said:
I had the same problem a while ago. Phone not detected by PCC/flashtool, SEUS, no xrecovery... started to panic
Then i read a post here somewhere about wotansever - its free but you gotta sign up.
http://www.wotanserver.com/en/
It detected my phone where all others failed and flashed it back to stock rom.
Try it - it works
Once you get it working again heres a great guide for flashtool (flashing/rooting/BL unlocking)
http://forum.xda-developers.com/showthread.php?t=928343
Click to expand...
Click to collapse
Thank you, i read a little about this but i'm affraid my problem is "before" any software since my phone is not detected by my system, neither running windows 7 nor linux.
It does not turn on when pushing "<-" and pluging usb.
9andar said:
You have to connect the phone in flashmode...
Use the link "How to use PC Companion" in my signature
Click to expand...
Click to collapse
hey i tried to installed the rom you are currently using and i have my bootloader locked and when i was promted to setup the installation the touch on my phone was not responding and it seems that i just clicked on next and also appears that because of that my phone not is just stuck at logo, hope you can give a tip on how to instal this rom
Hello,
i got a little Problem with my X10 (2.3.3 - rooted) and my Notebook (Acer - Win 7 64 bit).
I tried all ways to install the driver to use USB-Debugging but it won't install. The Device-Manager still tells me SEMC USB as unknown
I tried the usual way, start the phone with holding 'back', install the drivers manually...
Are there any other ways to get it working ?
Same goes for me,
Device manager states that the device is unknown, flashtool not working, PC companion no hope (connected to different USB ports including those of the motherboard).
it used to work but no chance now.
it charges normally from the USB (Orange LED) but would not connect to the PC.
Details:
Windows 7 x64
Gigabyte X58A-UD3R
Bootloader Unlocked Xperia X10 with 2.3.3 ROM and Doom's Kernel (the latest one)
The guy here says it is related to either windows windows update or faulty cable
http://android.modaco.com/topic/347751-flash-mode-not-working/
Didn't help...
But installing PC Companion did it
PC Companion install drivers automaticlly,that is the best solution.
RQ-1 said:
Didn't help...
But installing PC Companion did it
Click to expand...
Click to collapse
Sent from my xperia "z10i"
I tried removing and installing PC Companion but it didn't work either.
Any help guys?
Changing the computer had no effect as well
You must install SEUS ( Sony Ericsson Update Service ). Only SEUS will install right driver. Problem with SEUS is that when you look on SE official site, they tell you that SEUS for X10 no longer persist, and they guide you to PC companion which is crap.
Try this: try to connect your phone with PC, in flash mode. PC will try to install your phone driver but it can't find it. Then in Action Centar, on PC, (a small flag in sys tray, right down corner of a screen) find solution for this problem, and windows will automatically find SEUS over net. Install and enjoy.
from X10i via XDA premium
tried that but no luck as well (even in flash mode SEUS can not detect the device)
Thank you
hello i found a way and it worked for me download flash tool and extract it look for a folder called drivers in there u will find something called ggsetup-2.2.0.10
run this install it and all done
@huzi7868 thank you for your help
However, that didn't succeed and I reinstalled windows and drivers again, but still not working
Even no luck when the phone is in flashmode
Just tried it on a third Computer and checked the cable but the cable is working on another HTC Desire but not on my Xperia X10 (I mean my X10 cable), however they are both charging
try flashtools, there's a folder called 'drivers' in it, open it and click on the installer
a.monteiro said:
try flashtools, there's a folder called 'drivers' in it, open it and click on the installer
Click to expand...
Click to collapse
I agree, I also have solved in this way.
Download the latest version of Flashtool and after installing it you will find in the "drivers" folder the file "Flashtool-Drivers.exe".
Run it and select the drivers you need. Then connect again your Xperia X10
I really appreciate your help, but I had done that 3 times and on different computers but "USB Device not recognized"
As I sad before, use SEUS to install SEMC USB DRIVER. I have win 7 64bit, and I install driver on it. First, install Update service. When its finished, start Update Service and follow instruction (check "Licence Agree" button, and click next, then pick your phone, X10i I suppose, be carefull there is two X10, One is X10, and other is X10 SO-01b. I pick X10 for myself, and press NEXT. Turn off your phone, press and hold BACK button on phone while connecting with PC via USB. HOLD till you see message to release BACK button. Till then your driver will be installed.
Download SEUS from here http://www.megaupload.com/?d=SBDVZ3DG
@Dzufa Thank you, but I had done that before and tried it again, whenever I connect the phone pressing the back button the green LED illuminates and "USB device is not recognized" appears and nothing happen after that, SEUS just behaves like nothing is connected.
Try with this one. And I think you must be online, because SEUS must download some files.
I really did that and of course updated SEUS, as I said green LED illuminates and nothing happens even in flash tool (it used to work for ages but suddenly it stopped, it only charges)
BTW, I had flashed many kernels and ROMs before it happened so I am quite familiar with flashtool and SEUS, I unlocked the bootloader using 9lucas method and it worked after that I installed XSP ROM and the USB worked as well, however after 2 weeks or so, one day I left it connected it to the PC and I found that the phone turned off and refused to power on, I left it for a while in the charger then powered it on and it powered on, then it has refused to connect to the PC through USB since then.
Well, i try ICS but it was unstable, after repair with pc companion i try to install something more stable, but i am idiot.
I run bootloader succesfull, and then via flashtool flash X10_V1_BLRelock.ftf, and then boom, hardbrick the phone quess, because now nothing workes, wont charge, Led wont even blink, and i cant connect it to PC in anymore...
Is there any way to repair it at home, or it can be repaired only in servis with JTAG... ?