The title says it all, but the thing I'm wondering about is that it's recognized by my pc, when I type in adb devices it is recognized but it's offline, right now I'm just leaving it to drain the battery than I probably can turn it on again but it's not responding can't even soft reboot using Power Button + Volume Up/Down... Help would be greatly appreciated.
FIXED!!
Related
I have a very weird problem here, when the phone is off and not connected to the cable or pc the battery shows up on the screen as if it's charging itself LOL. And when I turn it on it won't turn on.
The only workaround I found is to connect the USB cable to the PC then press and hold "Volume down" then briefly press "Power button" from then it would boot normally. Any help will be appreciated. Thanks.
That isn't too surprise, believe or not, I've removed the battery pack off the phone and I'm still able searching web and make phone call.
Your phone is OFF and the icon still shows???
Yeah it's totally off and it still shows, even the progress bar is moving at the bottom of the battery icon.
What could be causing this? How can I fix it?
Dear all I have look up in the past posts but it doesn't help
The phone show a 100% charged battery logo when plug in to PC, but won't turn on
ADB Interface cannot list the phone (maybe I didn't turn on the debugging mode before this problem happens)
The phone cannot go into Recovery/Download mode
When I put it on charge, it vibrate and charge symbol shows for a few seconds and then it would go to sleep. If I press volume up/down or home button, the charge symbol pops up again. but not for the power button.
Please Help. Thanks.
Hmm. It either could be really sinister... Or simple.
Have you considered the power button may be faulty? That would account for it not turning on, but waking when you press the volume key. It would also not allow you to enter recovery or download mode. Its apparently (I haven't needed to myself) not hard to DIY replace it. Search on here/google for how to do it, I don't have a specific guide in mind though sorry.
Sent from a galaxy far, far away
my phone is rooted with Z2-lockeddualrecovery2.8.26
but today it start to turn off after each call
when i get home trying to turn it on it won't start, tried flashtool but no respond when i connect the phone while down volume key is pressed.
when i connect to charger the red light turn on for few seconds then show the Sony logo screen and stuck there no respond to power button and the red light is off while it's stuck on that screen it doesn't even showing charging as it suppose to do while the phone is off
when i press volume up key + power key the screen goes off and the red light is on but the screen won't turn on when i press the power button again
any one with an idea to fix it?
update: ok after many tries i been able to flash it with flashtool with that D6503_23.5.A.1.291.ftf
but still can't turn it on
when i connect the charger it show charging like 18% and when i leave it for while it show 0%
i disconnect the charger try to open nothing
then connect the charger again it shows 25% and i leave it for few seconds then it shows 100% but when i try to press the power button it shows empty charging battery icon while the phone is still off
what could be the reason ?
ok i manage to flash it with stock firmware
but still turning off randomly or restart randomly
and when it turned off i can't turn it on again unless i connect it to charger and when i do it keep blinking red led and sony logo on and off
is that hardware failure or battery failure or software failure ?
ok every one i have solve it ,
it came out to be faulty battery
@pharaon said:
ok every one i have solve it ,
it came out to be faulty battery
Click to expand...
Click to collapse
Sorry for delay, as you said, It's faulty battery.
Samsung Galaxy S9+ No custom, Just a normal phone from T carrier.
The situation is as follow. I wake up everyday and cannot turn on my phone, the screen is black but I hear it beeping when i press the volume keys. I do a Vol down Power to restart thinking it will , it restarts but the screen is black and unresponsive no matter what I do, the Power button is still functional at this moment.
What I quickly did is I connected the phone to my monitor using USB-C and i have a mouse connected to the internal KVM of the monitor- , perfect got excited that the phone at least works, on the monitor it shows up perfectly, I can control the phone with the mouse, enter my 4 digit password, works. That was the situation yesterday. Should have backed up then but didnt.
Today I wake up, the Power button does not work, so I read and find out that I can go downlead mode which I did using the Vol down and Bixby and plugging the charger.
tried the Vol Down and Power to restart it does not, so again I go in to the download mode and accidently press Volume up, Now I am completely stuck on Downloading... Do not turn off target
1. Power button does not work- I have no idea how to get the past Downloading screen now
2. Would I be able to recover anything it its really dead?
3. Any tips?
Hey everyone,
I have an issue with the bike tablet no longer turning on.
Previously, the bike wouldn’t boot past the P boot loader. I got it into fast boot with Power + Volume Up. There, I went to recovery. This presented a screen with an error robot and text “No command.” I powered the device off, planning to go back to fast boot and try something else, but now I can’t get the device to turn on.
I’ve tried
- holding the power button for extended periods of time
- holding the power button + volume up for an extended period of time
- directly connecting the power to the monitor
- unplugging for several hours to let batteries and capacitors drain
- using adb. Adb does not see the device, though windows device manager does recognize something is connected via usb
Ultimately, the screen is a large Android tablet so hoping someone could help out. Any suggestions?