[Unbrick][Wrong Flash] LG L7 II Flashed with L7 Firmware - LG Optimus L3 II, L5 II, L7 II, L9 II

Hello guys. After I have written the No Emergency Mode and No QDL 9008 detection Tutorial Unbrick, I researched a little with the help of my good friend @maxx_hr and in conclusion here is a method that doesn't include opening the device like in this tutorial. It is kind of easy for the normal user to do.
I AM NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOUR PHONE AND CANNOT BE HELD RESPONSIBLE. FLASHING THIS ON L7 OR L7 II WILL FULLY BRICK YOUR DEVICE AND SEND IT IN QDL 9008. CARE WITH THIS KIND OF TOOLS. IT IS MODIFIED TO DO SO BECAUSE THIS WAY YOU DON'T NEED TO OPEN YOUR PHONE!
Step 1: Unplug your device and unplug battery.
Step 2: Be sure to have a working USB cable plugged at the back of the phone.
Step 3: Without battery hold Volume UP and Plug USB Cable.
Step 4: Plug Battery Back. Your PC will detect the device.
Step 5: Go here: http://forum.xda-developers.com/opt...eneral/unbrick-lg-l7-ii-single-dual-t3166282/ and download the KDZ flasher and LG Drivers and install them. (For KDZ install the msxml.msi).
Step 6: Open KDZ_FW_UPD.exe at Type: 3GQCT ; at Phone Mode: EMERGENCY. Download this file: Neutronic_Nuke.kdz and at KDZ File Select what you downloaded. Press Software Update and let it finish. After it is done Unplug USB and Battery. Your phone is now completely dead and in QDL 9008 when you plug USB. PROFIT.
Step 7: Go here http://forum.xda-developers.com/opt...eneral/unbrick-lg-l7-ii-single-dual-t3166282/ and follow that tutorial (ignoring the parts that include opening the phone, closing it, motherboard stuff etc.) starting with 4. Flashing the MBR, EBR and the main bootloaders

Hi I have a problem I flash the KDZ that is supposed that brick the device but my device is still starting on the recovery and I also try to flash V20H, V20C, V10J and don´t install anything and even I try to install a custom ROM but still nothing just keep in Bootloop on the LG logo, what can i do in this case

Stefere said:
Hi I have a problem I flash the KDZ that is supposed that brick the device but my device is still starting on the recovery and I also try to flash V20H, V20C, V10J and don´t install anything and even I try to install a custom ROM but still nothing just keep in Bootloop on the LG logo, what can i do in this case
Click to expand...
Click to collapse
That does not make any sense you didn't read. This happens only if you flashed P700 image. You can't be in bootloop with P700 image. This was tested and works as intended no doubt. I made this myself and tested on my own device. So there is no way it does not work as intended. You are not in the situation described that's why it does not work.

neutrondev said:
That does not make any sense you didn't read. This happens only if you flashed P700 image. You can't be in bootloop with P700 image. This was tested and works as intended no doubt. I made this myself and tested on my own device. So there is no way it does not work as intended. You are not in the situation described that's why it does not work.
Click to expand...
Click to collapse
Thanks for reply my message and I don´t know why didn´t work I also try open my phone and follow all the instructions and in my computer the drivers install correctly but the system don´t boot and is something weird because also any KDZ file don´t flash
---------- Post added at 05:11 AM ---------- Previous post was at 05:07 AM ----------
Stefere said:
Thanks for reply my message and I don´t know why didn´t work I also try open my phone and follow all the instructions and in my computer the drivers install correctly but the system don´t boot and is something weird because also any KDZ file don´t flash
Click to expand...
Click to collapse
I flash accidently a P700 KDZ because a friend request me the original firmware and I didn´t rename the files and that is why also I am confussed because I follow all your instructions and anything work

Stefere said:
Thanks for reply my message and I don´t know why didn´t work I also try open my phone and follow all the instructions and in my computer the drivers install correctly but the system don´t boot and is something weird because also any KDZ file don´t flash
---------- Post added at 05:11 AM ---------- Previous post was at 05:07 AM ----------
I flash accidently a P700 KDZ because a friend request me the original firmware and I didn´t rename the files and that is why also I am confussed because I follow all your instructions and anything work
Click to expand...
Click to collapse
To open the phone you need to fully brick first. Sorry I tested that image myself and it worked. I don't know how to help you.

neutrondev said:
To open the phone you need to fully brick first. Sorry I tested that image myself and it worked. I don't know how to help you.
Click to expand...
Click to collapse
I will try today if i can flash the KDZ again because like you say is weird that don´t work and also I try to flash a ROM but still nothing

help
when im in eMMC software Download it inst detec my phone i have alrady do what you say

Related

[URGENT HELP] Unlock Boatloader and fastboot mode on 768g TELCEL

I really need Help unlocking boatloader in JB TELCEL, i flash the V20a kdz file that was posted here and everything went smooth, but i wanted to unlock the boatloader, and i try this guide so i have to do what is posted here,right?? i did as indicated, but did not work,everything was ok until step 13, i installed the drivers twice,as instructed,no use, and now every time i try to flash phone it keeps connecting and disconnecting (like it says in step 7: You will see a device that appear and disappear under "Other/Unknown Devices") and now i cant flash using kdz because wen in Lg software update the phone keeps disconnecting and connecting endlessly! so i could NOT unlock my boatloader and on top now i cant go back to ics!! Please HELP!! or how can i unlock the boatloader in order to put CMW and root my device!! HELP!!
albertwesquer said:
I really need Help unlocking boatloader in JB TELCEL, i flash the V20a kdz file that was posted here and everything went smooth, but i wanted to unlock the boatloader, and i try this guide so i have to do what is posted here,right?? i did as indicated, but did not work,everything was ok until step 13, i installed the drivers twice,as instructed,no use, and now every time i try to flash phone it keeps connecting and disconnecting (like it says in step 7: You will see a device that appear and disappear under "Other/Unknown Devices") and now i cant flash using kdz because wen in Lg software update the phone keeps disconnecting and connecting endlessly! so i could NOT unlock my boatloader and on top now i cant go back to ics!! Please HELP!! or how can i unlock the boatloader in order to put CMW and root my device!! HELP!!
Click to expand...
Click to collapse
i had just tried this method and now my l9 is dead, please help
pustulio666 said:
i had just tried this method and now my l9 is dead, please help
Click to expand...
Click to collapse
Damm dude,i try this method but i did not went that bad! i mean i just wasnt able to unlock boatloader but it seem that is not working!! HOPE someone can HELP US ASOP!!
albertwesquer said:
I really need Help unlocking boatloader in JB TELCEL, i flash the V20a kdz file that was posted here and everything went smooth, but i wanted to unlock the boatloader, and i try this guide so i have to do what is posted here,right?? i did as indicated, but did not work,everything was ok until step 13, i installed the drivers twice,as instructed,no use, and now every time i try to flash phone it keeps connecting and disconnecting (like it says in step 7: You will see a device that appear and disappear under "Other/Unknown Devices") and now i cant flash using kdz because wen in Lg software update the phone keeps disconnecting and connecting endlessly! so i could NOT unlock my boatloader and on top now i cant go back to ics!! Please HELP!! or how can i unlock the boatloader in order to put CMW and root my device!! HELP!!
Click to expand...
Click to collapse
Try reflashing the rom again and use it for some time without trying to unlock the bootloader. First be sure the rom is flashed perfectly and working fine. If everything works ok, you can go ahead with other experiments (of course at your own risk.) By the way, someone was saying Telcel might have not added the bootloader unlock feature in this rom. Just a possibility.
EDIT: The symptom you have mentioned "phone keeps connecting and disconnecting" known behavior (see post 7th point), while installing fastbook mode drivers. Seem your phone has come in fastboot mode (but still locked) and no fastboot drivers yet installed. Installing it is really very tricky. Follow that post carefully.
pustulio666 said:
i had just tried this method and now my l9 is dead, please help
Click to expand...
Click to collapse
Which rom you had before? Was it rooted and cwm on? Can you start phone in CWM mode (VolumeUp+Home+Power keys)? If yes, you can flash your cwm backup and be back on your previous rom.
I hope both of you people took nandroid backup (on external sdcard) before flashing.
cmahendra said:
Try reflashing the rom again and use it for some time without trying to unlock the bootloader. First be sure the rom is flashed perfectly and working fine. If everything works ok, you can go ahead with other experiments (of course at your own risk.) By the way, someone was saying Telcel might have not added the bootloader unlock feature in this rom. Just a possibility.
EDIT: The symptom you have mentioned "phone keeps connecting and disconnecting" known behavior (see post 7th point), while installing fastbook mode drivers. Seem your phone has come in fastboot mode (but still locked) and no fastboot drivers yet installed. Installing it is really very tricky. Follow that post carefully.
Which rom you had before? Was it rooted and cwm on? Can you start phone in CWM mode (VolumeUp+Home+Power keys)? If yes, you can flash your cwm backup and be back on your previous rom.
I hope both of you people took nandroid backup (on external sdcard) before flashing.
Click to expand...
Click to collapse
CANT FLASH BY KDZ cuz now the phone cant be recognized!!! So how to flash other that TELCEL firmware??
albertwesquer said:
CANT FLASH BY KDZ cuz now the phone cant be recognized!!! So how to flash other that TELCEL firmware??
Click to expand...
Click to collapse
But can you bring phone in SW upgrade Mode?
I think part of the problem was following the omap4boot. It flashes files to the phone which are not for our phone. I have done the same thing.
When I use the "Phone Tester" app from Play Store, under system info, it says the device is a "U2". This is wrong.
Screenshot here
I dont have any access to fastboot mode anymore as far as i can tell. I cant install clockworkmod on my phone now. Im trying to understand what changed by following the omap4boot guide.
albertwesquer said:
CANT FLASH BY KDZ cuz now the phone cant be recognized!!! So how to flash other that TELCEL firmware??
Click to expand...
Click to collapse
Yes it enters in SW upgrade Mode, but wen is about to be FLASHED it says than phone is disconnected, so i retry but is no use! this happen wen i installed the omap4boot drivers!!
albertwesquer said:
Yes it enters in SW upgrade Mode, but wen is about to be FLASHED it says than phone is disconnected, so i retry but is no use! this happen wen i installed the omap4boot drivers!!
Click to expand...
Click to collapse
Have patience and do not panic. This phone is really unbrickable, if not physically damaged.
I am not sure what is the status of your phone right now. But keep the fastboot thing aside and give priority to restore phone and make it properly working.
Remove all LG programs from pc, remove all LG drivers from pc and Restart PC. Now install latest LG PC Suite, and put phone in SW Upgrade mode and connect to pc and let all LG drivers install itself.
Do not let windows install any WDM drivers by clicking on this link while drivers are loaded. Do this always for any phone any device you connect to pc. Correct drivers already installed with PC Suite will load quickly.
Now run PC Suite and select Emergency Firmware Recovery option. Now LG PC suite should download fresh ROM and recover your phone.
================
If this fails, keeping phone in SW Upgrade mode, you can still try same with B2CAppClient as shown in 5A part of this thread. Click on "Start Updating"
================
Above both are online method and will need faster internet so rom is downloaded.
In the fastboot thread it clearly says to say no to the prompt that asks you if you want to flash u-boot. If you replaced your u-boot you need to get an original copy of the u-boot for your phone. I think Lelus has a post somewhere, but I don't know if its for your phone specifically. Search for Lelus x&u.
P.S. I've done same thing before and you should definitely be able to enter fastboot and get it sorted out again.
---------- Post added at 05:45 PM ---------- Previous post was at 05:38 PM ----------
I can't seem to find the u-boot x-loader fix Lelus uploaded for someone. You have to look or maybe PM him.
cmahendra said:
Have patience and do not panic. This phone is really unbrickable, if not physically damaged.
I am not sure what is the status of your phone right now. But keep the fastboot thing aside and give priority to restore phone and make it properly working.
Remove all LG programs from pc, remove all LG drivers from pc and Restart PC. Now install latest LG PC Suite, and put phone in SW Upgrade mode and connect to pc and let all LG drivers install itself.
Do not let windows install any WDM drivers by clicking on this link while drivers are loaded. Do this always for any phone any device you connect to pc. Correct drivers already installed with PC Suite will load quickly.
Now run PC Suite and select Emergency Firmware Recovery option. Now LG PC suite should download fresh ROM and recover your phone.
================
If this fails, keeping phone in SW Upgrade mode, you can still try same with B2CAppClient as shown in 5A part of this thread. Click on "Start Updating"
================
Above both are online method and will need faster internet so rom is downloaded.
Click to expand...
Click to collapse
SUCCESS MY FRIEND!! With YOUR TERRIFIC HELP i brought back my L9!! So what do you recommend i do next? Should i try to unlock the boatloader? Do you have any suggestions? cuz i REALLY WANNA ROOT MY PHONE!! Or is there a way to return to ICS? TANK YOU SO MUCH 4 UR HELP! by the way THANK YOU SO VERY MUCH for the instructions with the screenshots that you kindly put for me it really help!
congrats
albertwesquer said:
SUCCESS MY FRIEND!! With YOUR TERRIFIC HELP i brought back my L9!! So what do you recommend i do next? Should i try to unlock the boatloader? Do you have any suggestions? cuz i REALLY WANNA ROOT MY PHONE!! Or is there a way to return to ICS? TANK YOU SO MUCH 4 UR HELP! by the way THANK YOU SO VERY MUCH for the instructions with the screenshots that you kindly put for me it really help!
Click to expand...
Click to collapse
Great. Glad I could help. :highfive:
See, I told you "Have patience and do not panic. This phone is really unbrickable, if not physically damaged. "
I always talk with screenshots Ok, which method it worked? PC Suite or B2C? Which rom it flashed V20A?
You can easily root any locked bootloader JB with Lelus method, if you are familiar to flashing with offline fix. Will be safer+quicker to newbies.
See last line of my signature.
cmahendra said:
Great. Glad I could help. :highfive:
See, I told you "Have patience and do not panic. This phone is really unbrickable, if not physically damaged. "
I always talk with screenshots Ok, which method it worked? PC Suite or B2C? Which rom it flashed V20A?
You can easily root any locked bootloader JB with Lelus method, if you are familiar to flashing with offline fix. Will be safer+quicker to newbies.
See last line of my signature.
Click to expand...
Click to collapse
my l9 its alive!,
but i have some weird things, it doesn't has boot and splash screen and a strange screen like a broken screen until lock and unlock.
I used fastboot method to conect to lg software update and now i have my stock P768 ICS
pustulio666 said:
my l9 its alive!,
but i have some weird things, it doesn't has boot and splash screen and a strange screen like a broken screen until lock and unlock.
I used fastboot method to conect to lg software update and now i have my stock P768 ICS
Click to expand...
Click to collapse
your phone has wrong xloader or uboot or both
which one is the right kdz(link) for your phone ?
Lelus said:
your phone has wrong xloader or uboot or both
which one is the right kdz(link) for your phone ?
Click to expand...
Click to collapse
Here is the link to the threat, in there you will find P768 V20A Telcel Mexico JB for P768, Thanks and hope u can help us to unlock our wierd boatloader!
cmahendra said:
Great. Glad I could help. :highfive:
See, I told you "Have patience and do not panic. This phone is really unbrickable, if not physically damaged. "
I always talk with screenshots Ok, which method it worked? PC Suite or B2C? Which rom it flashed V20A?
You can easily root any locked bootloader JB with Lelus method, if you are familiar to flashing with offline fix. Will be safer+quicker to newbies.
See last line of my signature.
Click to expand...
Click to collapse
By method KDZ offline flash, and leave phone on and usb debug on and Lg software connection
CRAP that look very complicated :crying:, isn't there a easiest method? Thanks 4 ur help!
albertwesquer said:
Here is the link to the threat, in there you will find P768 V20A Telcel Mexico JB for P768, Thanks and hope u can help us to unlock our wierd boatloader!
Click to expand...
Click to collapse
From a quick glance at the kdz it looks like v20a for p768 doesn't have the code to unlock bootloader.
Lelus said:
From a quick glance at the kdz it looks like v20a for p768 doesn't have the code to unlock bootloader.
Click to expand...
Click to collapse
So this means that unlocking the bootloader is not possible? And we could NEVER do it? Is there any chance to at least root in a easy way? THANK YOU FOR YOUR HELP AND TIME!
albertwesquer said:
So this means that unlocking the bootloader is not possible? And we could NEVER do it? Is there any chance to at least root in a easy way? THANK YOU FOR YOUR HELP AND TIME!
Click to expand...
Click to collapse
you should be ok as long as other carriers with p768 allow bl unlocking, there might be other workarounds but nothing easy to do
Lelus said:
you should be ok as long as other carriers with p768 allow bl unlocking, there might be other workarounds but nothing easy to do
Click to expand...
Click to collapse
CRAP!!, i had a bad feeling you'll say that, well i have to dig around and wait til someone other than a noob like me, gives it a shot and nails it, so it can give me a noob-proof tutorial, THANKS mate, keep up the GREAT WORK YOU DO for XDA!

[SOLVED] Bypass LGsetupwizard!

I was wondering how to this.
I was flashing Killjoy's performance scripts (see http://forum.xda-developers.com/showthread.php?t=2411161). After flashing the file and choosing to reboot, for dumb reasons I chose to disable recovery flash when it asked to reboot. Now, when I go to LG setup, once I'm done, I get the message that "lg setup wizard has stopper working" and loops me back to the start of the setup. Please help!:crying:
I know L9 is virtually unbrickable. I just need to be pointed in the right direction and I know I can bring it back!
Edit: Issue resolved!
Did you by any chance uninstall it using titanium backup or similar? Try to get a logcat.
Sent from my LG-P760 using xda app-developers app
I guess he can't use none of the applications as he is stuck in the wizard. Try reflasing a stock ROM using kdz: http://forum.xda-developers.com/showthread.php?t=2085344
SkarlosBME said:
I guess he can't use none of the applications as he is stuck in the wizard. Try reflasing a stock ROM using kdz: http://forum.xda-developers.com/showthread.php?t=2085344
Click to expand...
Click to collapse
Yea, this is the case. Can't get out of it. I really don't know how in the world did it uninstall itself. I didn't use Titanium Backup at all. After flashing the killjoy zip file, I chose to reboot. I then got a warning:
"ROM may flash stock recovery on boot. Fix? THIS CAN'T BE UNDONE" I then get 3 options to chose from: "No", "Yes - Disable recovery flash, "++Go Back++
I chose yes, and then all went haywire. Is there a way I can determine my phone's connection type via computer? I tried flashing V20D using the KDZ offline method, but it won't progress. It says "Phone not connected." Last I recall, I left the connection on media sync (MTP, I think it's its acronym). Since I'm on JB, I know it needs to be in LG Software Mode.
I have faced this issue too, even if I entered into SW Upgrade mode manually, KDZ did not detect my phone :/
However, I had success using the official LG updater software (connected my phone in SW upgrade mode).
SkarlosBME said:
I have faced this issue too, even if I entered into SW Upgrade mode manually, KDZ did not detect my phone :/
However, I had success using the official LG updater software (connected my phone in SW upgrade mode).
Click to expand...
Click to collapse
Was your phone recognized by your computer? Because mine isn't. Think you can tell me more or less the steps you took to make it work?
Here's what I've tried so far:
1. downloaded most updated LG drivers
2. downloaded official LG mobile support tool
3. ran it, no effect.
4. downloaded LG pc suite, based on troubleshooting.
5. tried lg mobile support tool again, no good. Said connect PC to internet (???)
6. tried LG mobile support tool from shtttps from offline flash method, no good.
7. Put phone on SW upgrade mode (removed battery, volume up, put battery back in) and retried offline flash method again, halts at 15%. Says that phone isn't connected. It was set on DIAG since it's JB software.
8. Tried recovery update, but phone isn't recognized even if I put IMEI number in.
Thanks!
Flash a ics kdz... should work..
Sent from my LG-P769 using XDA Premium HD app
jbonilla51 said:
...
5. tried lg mobile support tool again, no good. Said connect PC to internet (???)
...
Click to expand...
Click to collapse
You have forgot to remove the lines you added at the end of your hosts file. Remove them, reboot your PC and then try again with the official tool.
SkarlosBME said:
You have forgot to remove the lines you added at the end of your hosts file. Remove them, reboot your PC and then try again with the official tool.
Click to expand...
Click to collapse
I forgot about that! Tried it, and the official tool worked excellent! Phone was able to go through setup wizard without a problem! Thanks a lot, man! Hitting the thanks button now!
:good::good::good:
SkarlosBME said:
You have forgot to remove the lines you added at the end of your hosts file. Remove them, reboot your PC and then try again with the official tool.
Click to expand...
Click to collapse
could you please elaborate on this. hosts files on Windows? I'm having similar problem with new lg k7 no kdz and for some reason this phone has no recovery at all. button combo will perform a factory reset with no prompt butt no menu options at all. and phone getting no dev love at all. it's very touchy. like it'll brick if you look at it the wrong way

[GUIDE-VDO] Flashing KDZ/TOT firmware by LGUP (NEW Flash method)

I all,
I am proud to present new flashing method for TOT/KDZ firmware.
Download LGUP (G2/G3) from
https://www.androidfilehost.com/?fid=24352994023710005
Download LGUP (G4) from
https://www.androidfilehost.com/?fid=24352994023710034
Instruction.
1. Download files
2. Upzip
3. Install LGUP Installer
4. Install LGUP DLL
How to work.
Manual Enter Download mode or normal boot to system and plug phone to computer, LGUP will be boot to download mode automatically. :
DON'T FORGET BACKUP DATA BEFORE WORKING WITH THIS TOOL
Enjoy..
KDZ firmware
TOT firmware
How to fix problem with this tools
1. Model Unknow.
- root only
Please modify your build.prop
ro.lge.swversion=XXX
ro.lge.swversion_short=XXX
to
ro.lge.swversion=D80XAAb
ro.lge.swversion_short=VAAb
D80X is your varaint (ex. D802)
AAb is your sw version (ex. 30b)
ex.
ro.lge.swversion=D80230b
ro.lge.swversion_short=V30b
Added to index
[INDEX][LG G2] ROMs, Kernels, Guides and more
hello first thnx for this great program but i have two questions :
1- when i plug the phone with the computer do i have to power it off or boot it in a download mode or just keep it on ??
2- it doesn't have that 2% stuck problem does it ?? coz man that problem is like my nightmare :crying:
TornadoMiMo said:
hello first thnx for this great program but i have two questions :
1- when i plug the phone with the computer do i have to power it off or boot it in a download mode or just keep it on ??
Normal boot to system. LGUP will automatically to boot your phone to Download mode or you can manual enter download mode like the older method.
2- it doesn't have that 2% stuck problem does it ?? coz man that problem is like my nightmare :crying:
- you must use tot firmware to solve it but your data will be lost. or
- if you can enter download mode flash this file https://www.androidfilehost.com/?fid=24052804347825409 via TWRP
then use lg flash tool again.
Click to expand...
Click to collapse
as above.
Great job.
Sent from my LG-H815 using Tapatalk
can t instal Install LGUP DLL and not showing like in video port (com41), its shows communication port (com1). and after i open LGup its say there is no handset connected. plz help me i really want to come back to stock to send phone to warrinty coz i have yellow spot in right-up corner ( sry for bad english
Ginel said:
can t instal Install LGUP DLL and not showing like in video port (com41), its shows communication port (com1). and after i open LGup its say there is no handset connected. plz help me i really want to come back to stock to send phone to warrinty coz i have yellow spot in right-up corner ( sry for bad english
Click to expand...
Click to collapse
Which ROM do you use ? Are you choose mtp ? Please screenshot?
or
edit build.prop
ro.lge.swversion=XXX
ro.lge.swversion_short=XXX
to
ro.lge.swversion=D80XAAb
ro.lge.swversion_short=VAAb
D80X is your varaint (ex. D802)
AAb is your sw version (ex. 30b)
ex.
ro.lge.swversion=D80230b
ro.lge.swversion_short=V30b
Sent from my LG-D802 using Tapatalk
im on cm 12.1 from cyanogen with kernel HH 8.1 and yes im on MTP use, when i plug phone to my pc is no problem. but idk why i cannot instal LGUP DLL i open in and after 3 sec its start to load and then nothing happen instaler dissapears. and i dont have port com41
i will try to my sister laptop later when i will go gome, but now i need to instal driver from lg on that laptop to? and adb? or only to use that 2 instaler from your post?
Ginel said:
im on cm 12.1 from cyanogen with kernel HH 8.1 and yes im on MTP use, when i plug phone to my pc is no problem. but idk why i cannot instal LGUP DLL i open in and after 3 sec its start to load and then nothing happen instaler dissapears. and i dont have port com41
i will try to my sister laptop later when i will go gome, but now i need to instal driver from lg on that laptop to? and adb? or only to use that 2 instaler from your post?
Click to expand...
Click to collapse
Sure. You have to install driver LG before. Depend on your computer for com ports. Not exactly COM41 , you will get another ports number such as COM17,COM20 or COM5.
When you installed dll, it start about 3 sec that is correct.
thx i will give a try at night.
This one is very useful. @somboon please provide links also for kdz and tot files. Thanks a lot!
sheikhramnuj said:
This one is very useful. @somboon please provide links also for kdz and tot files. Thanks a lot!
Click to expand...
Click to collapse
This is what I use
Art Vanderlay said:
This is what I use Lg firmware list
Click to expand...
Click to collapse
That website is NOT allowed here, They use bad practices and use redirect links.
---------- Post added at 06:52 AM ---------- Previous post was at 06:51 AM ----------
Art Vanderlay said:
This is what I use Lg firmware list
Click to expand...
Click to collapse
I keep the links up to date on my server in the orginal back to stock guide here - http://forum.xda-developers.com/showthread.php?t=2432476
hyelton said:
That website is NOT allowed here, They use bad practices and use redirect links.
---------- Post added at 06:52 AM ---------- Previous post was at 06:51 AM ----------
I keep the links up to date on my server in the orginal back to stock guide here - http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
I didn't know that! I'll take it down. Cheers.
Art Vanderlay said:
I didn't know that! I'll take it down. Cheers.
Click to expand...
Click to collapse
Yeah sadly they steal bw and then make money on it.
Sent from my LG-D800 using Tapatalk
I'm getting unknown model therefore cannot flash any sugestions?
Thanks for posting.The other Tools didn't work well on my computer,so I hope this one does.
kimush said:
I'm getting unknown model therefore cannot flash any sugestions?
Click to expand...
Click to collapse
Read top thread.
Sent from my LG-D802 using Tapatalk
i cant find "ro.lge.swversion=D80230b" in my build prop. im using google edition 1.3

Repair costs of lg p500 brick in india!

Recently I brick my lg p500 while reboot in amon ra thunder G recovery . due I have stock ROM already installed I just unrooted phone and went to service center at Bharuch India. They told me it is easier for them to repair and make it working . because we have no opportunity to use now kdz and there no way to save it .
So anyone please tell me the minimum cost of repair asked by lge repair center.
Here they asked me to give 250 INR. I was shocked in greb my phone and ran away from shop because I have not even 10 INR. :crying:
If possible to flash recovery through fastboot method plz tell me .
Say only if tested because I tried it but unfortunately failed....
niral.naik said:
If possible to flash recovery through fastboot method plz tell me .
Say only if tested because I tried it but unfortunately failed....
Click to expand...
Click to collapse
Can you access the recovery or the system?
I didn't understand from your post.
I can only open fastboot mode but can't detected by PC and second I open emergency mode.
When I don't do any thing phone boots normally as shown in PC detected all modem and other due i installed all drivers properly but reality is phone sticks at Build : RA - THUNDERG -3.0.6-GNM
So I cannot do access any of above
If you want to know whole process before the brick I can tell you
niral.naik said:
If you want to know whole process before the brick I can tell you
Click to expand...
Click to collapse
It will be great, however I'll answer tomorrow.
Haven't been getting much sleep this week, and it's past midnight here, I may fall asleep standing at any moment now.
But you can post the whole process right now if you wish, perhaps someone else will be able to help you by then.
Process before p500 brick!
My p500 was running on stock ginger bread v20d version. As we all know it has ugly android animation so i added boot animation zip file and added a file from cm10.1's media folder to run boot animation .Recovery was Amon Ra thunder G.
I was trying to update busybox through just their free apk (available on play store) . so I was installing it I select advance option and also choose non recommend applets . I found after finishing installation my phone was take more time to wake from screen off . I understand that I made a great done .because nothing like this was happened before in stock ROM . I tried to reboot it but stuck at my own added custom animation . as usual I try to go to recovery and delete this animation file . but now I stuck recovery start up text BUILD :RA THUNDER GNM.
God of android come here to help me please
I do not have 250 Rupees to pay them .?
Why can't you use kdz?
I think that you may be able to use it with the bootloader.
Edit: I found out what you need to do.
First, you need to boot to emergency mode.
Instructions are here, it's the same for the Optimus One, so no need to worry.
http://www.ehow.com/how_12314778_boot-emergency-mode-optimus-t.html
Update: Here are more complete instructions.
Make sure you have installed the LG drivers, and you have the kdz file (full image, not just modem).
How to Flashing LG Optimus One back to Original Firmware
Turn off your cellphone
Press and hold Volume[+] + Power + Back buttons, until your Optimus boot in emergency mode
Connect LG Optimus One to PC (via USB)
tips: maybe it`s a little strange to do, but you can try to shake the phone if it can`t detect.
Run KDZ_FW_UPD.exe
Select Type : 3GQCT
Select PhoneMode : DIAG
tips: if this option failed try EMERGENCY or CS_EMERGENCY
At KDZ Files section, select firmware that you already download
Click launch software update button
tips: someone say that it`s good idea to shake your optimus one with gently to avoid stuck.
Wait until it`s done, unplug the usb cable
Press and hold Volume[-] + HOME + Power buttons
See the firmware version, congratulation you did it.
If you don't have the files, I'll post links for you to download them.
moriel5 said:
Why can't you use kdz?
I think that you may be able to use it with the bootloader.
Edit: I found out what you need to do.
First, you need to boot to emergency mode.
Instructions are here, it's the same for the Optimus One, so no need to worry.
http://www.ehow.com/how_12314778_boot-emergency-mode-optimus-t.html
Update: Here are more complete instructions.
Make sure you have installed the LG drivers, and you have the kdz file (full image, not just modem).
How to Flashing LG Optimus One back to Original Firmware
Turn off your cellphone
Press and hold Volume[+] + Power + Back buttons, until your Optimus boot in emergency mode
Connect LG Optimus One to PC (via USB)
tips: maybe it`s a little strange to do, but you can try to shake the phone if it can`t detect.
Run KDZ_FW_UPD.exe
Select Type : 3GQCT
Select PhoneMode : DIAG
tips: if this option failed try EMERGENCY or CS_EMERGENCY
At KDZ Files section, select firmware that you already download
Click launch software update button
tips: someone say that it`s good idea to shake your optimus one with gently to avoid stuck.
Wait until it`s done, unplug the usb cable
Press and hold Volume[-] + HOME + Power buttons
See the firmware version, congratulation you did it.
If you don't have the files, I'll post links for you to download them.
Click to expand...
Click to collapse
Sir Please post link if possible . Thanks in Advance.
niral.naik said:
Sir Please post link if possible . Thanks in Advance.
Click to expand...
Click to collapse
I have kdz app with all drives but not have image files.
niral.naik said:
I have kdz app with all drives but not have image files.
Click to expand...
Click to collapse
Sorry about being late, I'll post the link in a few minutes.
Update: Here it is, V20D for India.
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW459286573210987654321/V20D_00.kdz
So did you manage to fix the issue?
moriel5 said:
Sorry about being late, I'll post the link in a few minutes.
Update: Here it is, V20D for India.
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW459286573210987654321/V20D_00.kdz
Click to expand...
Click to collapse
Thanks so much. You saved me Sir . You are great.
moriel5 said:
So did you manage to fix the issue?
Click to expand...
Click to collapse
Sir I will perform it but if you don't mind I want to ask you have you tried it before ?
niral.naik said:
Sir I will perform it but if you don't mind I want to ask you have you tried it before ?
Click to expand...
Click to collapse
Yes, I did so half a year ago, to update my LG Optimus P500H.
Unfortunately there was no update in Israel, and it's firmware was at one of our cellular providers (Pelephone), so I had to use this method to flash a different country's unlocked firmware (some european firmware, I forget which) with the same bands support in the modem, before flashing CM7.1 and TWRP.
It's just been a long time, that's why I didn't remember how to do it.
moriel5 said:
Yes, I did so half a year ago, to update my LG Optimus P500H.
Unfortunately there was no update in Israel, and it's firmware was at one of our cellular providers (Pelephone), so I had to use this method to flash a different country's unlocked firmware (some european firmware, I forget which) with the same bands support in the modem, before flashing CM7.1 and TWRP.
It's just been a long time, that's why I didn't remember how to do it.
Click to expand...
Click to collapse
So will it work for Indian p500 with no cellular provider restrictions?
niral.naik said:
So will it work for Indian p500 with no cellular provider restrictions?
Click to expand...
Click to collapse
It should work with with all P500's, restrictions or no restrictions, it doesn't matter.
I will test on this Sunday. When my laptop comes to home. By the way if it works I promise I will give you 100 Rupiya as donation.

LG G6 UnBrick (New Method)

LG G6 Unbrick
First Thing First: If you try this method, I nor anybody else is responsible
for any further damage done to your phone.
!!!YOU CANNOT FLASH THIS TO AN H872!!!
If you have destroyed the partitions, you are going to have to try Method 2 (Second Post)​
Models Confirmed: LS993, H871, H870ds, H870, AS993
READ THE ENTIRE GUIDE OVER BEFORE STARTING
Files needed:
All Here : https://drive.google.com/open?id=1OQnP2tu7hqlR0tbEdxLnzj_xOx12Ndvu
CLICK “DOWNLOAD ALL” IN TOP RIGHT CORNER
Working KDZ for your model : https://lg-firmwares.com/
UNBRICK PROCEDURE:
(DO NOT CONNECT PHONE UNTIL STEP 6)
Step 1) Download Files ---> Duh, lol
Step 2) Install QDLoader Driver (Select the driver for your system, 32 or 64-bit)
Use The new Signed driver.
Step 3) Extract AS993 to a folder. Any folder will work.
Step 4) Copy FireHose to same folder as AS993.
Step 5) Extract Qualcomm_Flash_Image_Loader_v2.0.1.9 to any folder.
Step 6) Start QFIL.
Under “Select Build Type” Select “Flat Build”
Under “Select Programmer” click “Browse”
Browse to the AS993 folder you created earlier and select the Firehose, hit open
In the Title Bar, click Configuration ->FireHose Configuration
Uncheck every checkbox, choose “Sahara” in Download Protocol dropdown, and “ufs” in
Device Type dropdown
Hit OK
Under “Select Flat Build” click “Load XML”
Browse to AS993 folder and select every rawprogram XML and hit open.
A windows will pop up asking to select Patch XML, Select every Patch XML, and hit open.
Connect Phone and click Download
If you encounter an error, try to reboot the phone and try download again
(Hold Vol Down + Power until you see COM port disappear and show up again)
Wait for download to finish.......
Phone will reboot to Fastboot
Step 7) Install LGUP_Store_Frame_Ver_1_14_3
Step 8) Extract LGUP Patch rar to rogram Files:\LG Electronics\LGUP
Put Phone into Download Mode (Unplug Phone → Turn phone off → Hold Vol Up → Plug Phone In)
Step 9) Run LGUP
In Model List window choose your phone and click Select
Under “Process” Select “Partition DL”
Under “File Path” to the right of “Bin File” click the button with 3 periods
Select your working KDZ
Click Start
A window will pop-up with partitions. Check select all, and then OK
Another window will pop-up explaining which partitions will change, click Yes
Wait for Flash to complete.......
!!!AFTER RESTART, YOU MUST FACTORY RESET!!!
To Perform Factory Reset Do The Following:
HOLD VOL DOWN + POWER, AS SOON AS YOU SEE BOOT SCREEN, RELEASE POWER BUTTON FOR A MOMENT, THEN CONTINUE HOLDING POWER AND VOL DOWN.
!!!DO NOT RELEASE POWER OR VOL DOWN BUTTONS UNTIL FACTORY RESET MENU APPEARS!!!
Use VOL UP\DOWN to choose to complete Factory Reset, then hit Power Button to perform Factory Reset.
CONGRATULATIONS! YOUR PHONE IS NOW UNBRICKED!
ScreenShots to Come, and Edits to be made.
Edit: H870ds, H870 and AS993 added to working models
Removed old drivers from Google Drive for simplicity.​
Reserved
Thank bro
LGM-600l
Please help me create fade rawprogram XML and Patch XML for lgm-g600l. thanks a lot.
Is us988 work?
jascharichter said:
Is us988 work?
Click to expand...
Click to collapse
Although it has not been tested, there is no reason it shouldn't work. The worse that could happen is you're stuck in the same situation.
Firehose exists for g6 now? Would this allow me to safely pry at LG's bootloader without permanent bricks? Would love to take it into my own hands but couldn't afford the risks before. I'm using a Canadian H873
Tinyshy said:
Firehose exists for g6 now? Would this allow me to safely pry at LG's bootloader without permanent bricks? Would love to take it into my own hands but couldn't afford the risks before. I'm using a Canadian H873
Click to expand...
Click to collapse
Yep. Have at it. But, like always, I don't recommend purposely bricking.
I should mention that you don't need to use the xml stuff.
In QFIL in one of the top menus, there's a partition option, where it reads the gpt from the phone and you can select them and flash individual files. So you can flash directly bootloader
or whatever you need from your proper kdz source.
Lot's of people have wrecked there partition table trying to unbrick. That is why I included them.
inbox me
Dylan110494 said:
Please help me create fade rawprogram XML and Patch XML for lgm-g600l. thanks a lot.
Click to expand...
Click to collapse
inbox me inbox me
jthein1989 said:
Lot's of people have wrecked there partition table trying to unbrick. That is why I included them.
Click to expand...
Click to collapse
I'm sorry. I have been extremely busy lately. I will let you know when I get them done.
Tinyshy said:
Firehose exists for g6 now? Would this allow me to safely pry at LG's bootloader without permanent bricks? Would love to take it into my own hands but couldn't afford the risks before. I'm using a Canadian H873
Click to expand...
Click to collapse
Did you try it yet?
I'm also trying to fix a dead Canadian H873 (Videotron Carrier). Had tried my hand in the past at creating the patch.xml and rawprog0.xml (one method had me peek at the gpt files using an excel/libreoffice spreadheet) but failed for various reason also not having a proper programmer file didn't help any.
For those that encounter issues with either the programmer file failing or getting sahara fail FHLoader, something like cannot find system file try this:
1. Make sure to reboot phone and hit download to phone in QFIL right away. On my device sahara seemed to be timing out quickly.
2. For the second error using the QFIL included with QPST 2.7.474 fixed it.
Sadly i tried to refresh the phone using the backup files i was given with it but now it doesn't get detected. Holding power button the phone vibrates and nothing else happens. Tread lightly.
So good news the programmer file works (tried it on a H873 Videotron variant), bad news do it right the first time or else.
Time to start searching for a way to force it back into edl.
draekko said:
Time to start searching for a way to force it back into edl.
Click to expand...
Click to collapse
To clarify i used a backup of the files i had on hand for the device and not the files provided by OP.
Hi everyone, I have just bricked my G6, hard brick I think ( does not charge, cant get into download mode, cant hard reset either, only show Qualcomm qloader 9008"). This happened after I tried cross flashing it from LS993 to H872 ( I now know that a NO NO ). Can someone here help me on how to get it back to life ? I ve read quite a lot of different topics but the more I research the more confused I am. Some say I need to restore to stock firmware, but there is no stock firmware for LS993... Any help would be greatly appreciated and I hope you have a very great day
Read my method, download the files, read it again, and follow the steps.
jthein1989 said:
Read my method, download the files, read it again, and follow the steps.
Click to expand...
Click to collapse
I did but I am still so confused. Can you please tell me which firmware should I download and the firehose to use too. I think I understood most of the post here, except those 2 things: kdz and firehose.
jthein1989 said:
Read my method, download the files, read it again, and follow the steps.
Click to expand...
Click to collapse
Friend, I congratulate you for your great contribution and help many. I have the same problem but the program tells me that ...
download fail: Sahara Fail: QsaharaServer Fail: Process Fail.
ps: I have the model H870
---------- Post added at 08:53 AM ---------- Previous post was at 08:39 AM ----------
jthein1989 said:
Read my method, download the files, read it again, and follow the steps.
Click to expand...
Click to collapse
Friend, I congratulate you for your great contribution and help many. I have the same problem but the program tells me that ...
download fail: Sahara Fail: QsaharaServer Fail: Process Fail.
ps: I have the model H870
Hi!
I am trying to follow the steps shown but my computer do not recognize my H870 in "select" port :/
any idea?
thank you very much

Categories

Resources