[GUIDE-VDO] Flashing KDZ/TOT firmware by LGUP (NEW Flash method) - G2 General

I all,
I am proud to present new flashing method for TOT/KDZ firmware.
Download LGUP (G2/G3) from
https://www.androidfilehost.com/?fid=24352994023710005
Download LGUP (G4) from
https://www.androidfilehost.com/?fid=24352994023710034
Instruction.
1. Download files
2. Upzip
3. Install LGUP Installer
4. Install LGUP DLL
How to work.
Manual Enter Download mode or normal boot to system and plug phone to computer, LGUP will be boot to download mode automatically. :
DON'T FORGET BACKUP DATA BEFORE WORKING WITH THIS TOOL
Enjoy..
KDZ firmware
TOT firmware

How to fix problem with this tools
1. Model Unknow.
- root only
Please modify your build.prop
ro.lge.swversion=XXX
ro.lge.swversion_short=XXX
to
ro.lge.swversion=D80XAAb
ro.lge.swversion_short=VAAb
D80X is your varaint (ex. D802)
AAb is your sw version (ex. 30b)
ex.
ro.lge.swversion=D80230b
ro.lge.swversion_short=V30b

Added to index
[INDEX][LG G2] ROMs, Kernels, Guides and more

hello first thnx for this great program but i have two questions :
1- when i plug the phone with the computer do i have to power it off or boot it in a download mode or just keep it on ??
2- it doesn't have that 2% stuck problem does it ?? coz man that problem is like my nightmare :crying:

TornadoMiMo said:
hello first thnx for this great program but i have two questions :
1- when i plug the phone with the computer do i have to power it off or boot it in a download mode or just keep it on ??
Normal boot to system. LGUP will automatically to boot your phone to Download mode or you can manual enter download mode like the older method.
2- it doesn't have that 2% stuck problem does it ?? coz man that problem is like my nightmare :crying:
- you must use tot firmware to solve it but your data will be lost. or
- if you can enter download mode flash this file https://www.androidfilehost.com/?fid=24052804347825409 via TWRP
then use lg flash tool again.
Click to expand...
Click to collapse
as above.

Great job.
Sent from my LG-H815 using Tapatalk

can t instal Install LGUP DLL and not showing like in video port (com41), its shows communication port (com1). and after i open LGup its say there is no handset connected. plz help me i really want to come back to stock to send phone to warrinty coz i have yellow spot in right-up corner ( sry for bad english

Ginel said:
can t instal Install LGUP DLL and not showing like in video port (com41), its shows communication port (com1). and after i open LGup its say there is no handset connected. plz help me i really want to come back to stock to send phone to warrinty coz i have yellow spot in right-up corner ( sry for bad english
Click to expand...
Click to collapse
Which ROM do you use ? Are you choose mtp ? Please screenshot?
or
edit build.prop
ro.lge.swversion=XXX
ro.lge.swversion_short=XXX
to
ro.lge.swversion=D80XAAb
ro.lge.swversion_short=VAAb
D80X is your varaint (ex. D802)
AAb is your sw version (ex. 30b)
ex.
ro.lge.swversion=D80230b
ro.lge.swversion_short=V30b
Sent from my LG-D802 using Tapatalk

im on cm 12.1 from cyanogen with kernel HH 8.1 and yes im on MTP use, when i plug phone to my pc is no problem. but idk why i cannot instal LGUP DLL i open in and after 3 sec its start to load and then nothing happen instaler dissapears. and i dont have port com41
i will try to my sister laptop later when i will go gome, but now i need to instal driver from lg on that laptop to? and adb? or only to use that 2 instaler from your post?

Ginel said:
im on cm 12.1 from cyanogen with kernel HH 8.1 and yes im on MTP use, when i plug phone to my pc is no problem. but idk why i cannot instal LGUP DLL i open in and after 3 sec its start to load and then nothing happen instaler dissapears. and i dont have port com41
i will try to my sister laptop later when i will go gome, but now i need to instal driver from lg on that laptop to? and adb? or only to use that 2 instaler from your post?
Click to expand...
Click to collapse
Sure. You have to install driver LG before. Depend on your computer for com ports. Not exactly COM41 , you will get another ports number such as COM17,COM20 or COM5.
When you installed dll, it start about 3 sec that is correct.

thx i will give a try at night.

This one is very useful. @somboon please provide links also for kdz and tot files. Thanks a lot!

sheikhramnuj said:
This one is very useful. @somboon please provide links also for kdz and tot files. Thanks a lot!
Click to expand...
Click to collapse
This is what I use

Art Vanderlay said:
This is what I use Lg firmware list
Click to expand...
Click to collapse
That website is NOT allowed here, They use bad practices and use redirect links.
---------- Post added at 06:52 AM ---------- Previous post was at 06:51 AM ----------
Art Vanderlay said:
This is what I use Lg firmware list
Click to expand...
Click to collapse
I keep the links up to date on my server in the orginal back to stock guide here - http://forum.xda-developers.com/showthread.php?t=2432476

hyelton said:
That website is NOT allowed here, They use bad practices and use redirect links.
---------- Post added at 06:52 AM ---------- Previous post was at 06:51 AM ----------
I keep the links up to date on my server in the orginal back to stock guide here - http://forum.xda-developers.com/showthread.php?t=2432476
Click to expand...
Click to collapse
I didn't know that! I'll take it down. Cheers.

Art Vanderlay said:
I didn't know that! I'll take it down. Cheers.
Click to expand...
Click to collapse
Yeah sadly they steal bw and then make money on it.
Sent from my LG-D800 using Tapatalk

I'm getting unknown model therefore cannot flash any sugestions?

Thanks for posting.The other Tools didn't work well on my computer,so I hope this one does.

kimush said:
I'm getting unknown model therefore cannot flash any sugestions?
Click to expand...
Click to collapse
Read top thread.
Sent from my LG-D802 using Tapatalk

i cant find "ro.lge.swversion=D80230b" in my build prop. im using google edition 1.3

Related

[Q] How to flash with original firmware

Hi all. I would like to know how to reflash original firmware for my phone. It seems I messed it up when I tried flashing a new recovery through fastboot. Now it just shows the LG logo then turns right off when turned on. I can still enter Emergency mode, so I can probably reflash it with the original firmware. If you guys have a better idea please let me know.
search for kz updte
arvinoids said:
Hi all. I would like to know how to reflash original firmware for my phone. It seems I messed it up when I tried flashing a new recovery through fastboot. Now it just shows the LG logo then turns right off when turned on. I can still enter Emergency mode, so I can probably reflash it with the original firmware. If you guys have a better idea please let me know.
Click to expand...
Click to collapse
For steps how-to looks here
For KDZ updater search KDZ_FW_UP on google
For list of fw, try look here. Few pepople report, that have some problems. If you didn't find what you search for, just try download FW from other nearest country.
Hi, can someone please help to upload the SEA firmware ? There seems to be a problem downloading it from lgmobile
http://forum.xda-developers.com/showpost.php?p=9758751&postcount=1
Usethis rom for 10C
csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/ASEABK/V10c_00/V10C_00.kdz
(SEA)
Verify if you have access into port 9002.
The_ERROR said:
http://forum.xda-developers.com/showpost.php?p=9758751&postcount=1
Usethis rom for 10C
csmg.lgmobile.com:9002/swdata/WEBSW/LGP500/ASEABK/V10c_00/V10C_00.kdz
(SEA)
Verify if you have access into port 9002.
Click to expand...
Click to collapse
I can't seem to load that page. How do I verify for port access 9002?
I tested it just minute before, so I'm sure, that it works.
Test:
Start -> Run... -> cmd
in command line enter:
telnet csmg.lgmobile.com 9002 - brobably you get following:
...>telnet csmg.lgmobile.com 9002
Connecting To csmg.lgmobile.com...Could not open connection to the host, on port
9002: Connect failed
1) Try switch off firewall
2) Find some free proxy on internet and use it for proxying of connection
3) I try prepare this for you (I'm on work and here port 9002 is not allowed, so I have to download it remotely through my router at home and I have slow speed connection )
Thanks alot ! it's working now! using 3g to download via tethering on iphone!
adrianghaust said:
Thanks alot ! it's working now! using 3g to download via tethering on iphone!
Click to expand...
Click to collapse
Fine!! You are welcome!
The_ERROR said:
For steps how-to looks here
For KDZ updater search KDZ_FW_UP on google
For list of fw, try look here. Few pepople report, that have some problems. If you didn't find what you search for, just try download FW from other nearest country.
Click to expand...
Click to collapse
i have the exact same problem !!!!!!!! you fixed yours ??? how ?!?!? plz help me !!!!!
www.forum.xda-developers.com/showthread.php?t=1060121
to reflash official firmware go to the link above our click on the link in my signature.
same problemmmm !!!!!!!! plz help !!!!! :'(

[Unbrick][Wrong Flash] LG L7 II Flashed with L7 Firmware

Hello guys. After I have written the No Emergency Mode and No QDL 9008 detection Tutorial Unbrick, I researched a little with the help of my good friend @maxx_hr and in conclusion here is a method that doesn't include opening the device like in this tutorial. It is kind of easy for the normal user to do.
I AM NOT RESPONSIBLE FOR ANYTHING THAT HAPPENS TO YOUR PHONE AND CANNOT BE HELD RESPONSIBLE. FLASHING THIS ON L7 OR L7 II WILL FULLY BRICK YOUR DEVICE AND SEND IT IN QDL 9008. CARE WITH THIS KIND OF TOOLS. IT IS MODIFIED TO DO SO BECAUSE THIS WAY YOU DON'T NEED TO OPEN YOUR PHONE!
Step 1: Unplug your device and unplug battery.
Step 2: Be sure to have a working USB cable plugged at the back of the phone.
Step 3: Without battery hold Volume UP and Plug USB Cable.
Step 4: Plug Battery Back. Your PC will detect the device.
Step 5: Go here: http://forum.xda-developers.com/opt...eneral/unbrick-lg-l7-ii-single-dual-t3166282/ and download the KDZ flasher and LG Drivers and install them. (For KDZ install the msxml.msi).
Step 6: Open KDZ_FW_UPD.exe at Type: 3GQCT ; at Phone Mode: EMERGENCY. Download this file: Neutronic_Nuke.kdz and at KDZ File Select what you downloaded. Press Software Update and let it finish. After it is done Unplug USB and Battery. Your phone is now completely dead and in QDL 9008 when you plug USB. PROFIT.
Step 7: Go here http://forum.xda-developers.com/opt...eneral/unbrick-lg-l7-ii-single-dual-t3166282/ and follow that tutorial (ignoring the parts that include opening the phone, closing it, motherboard stuff etc.) starting with 4. Flashing the MBR, EBR and the main bootloaders
Hi I have a problem I flash the KDZ that is supposed that brick the device but my device is still starting on the recovery and I also try to flash V20H, V20C, V10J and don´t install anything and even I try to install a custom ROM but still nothing just keep in Bootloop on the LG logo, what can i do in this case
Stefere said:
Hi I have a problem I flash the KDZ that is supposed that brick the device but my device is still starting on the recovery and I also try to flash V20H, V20C, V10J and don´t install anything and even I try to install a custom ROM but still nothing just keep in Bootloop on the LG logo, what can i do in this case
Click to expand...
Click to collapse
That does not make any sense you didn't read. This happens only if you flashed P700 image. You can't be in bootloop with P700 image. This was tested and works as intended no doubt. I made this myself and tested on my own device. So there is no way it does not work as intended. You are not in the situation described that's why it does not work.
neutrondev said:
That does not make any sense you didn't read. This happens only if you flashed P700 image. You can't be in bootloop with P700 image. This was tested and works as intended no doubt. I made this myself and tested on my own device. So there is no way it does not work as intended. You are not in the situation described that's why it does not work.
Click to expand...
Click to collapse
Thanks for reply my message and I don´t know why didn´t work I also try open my phone and follow all the instructions and in my computer the drivers install correctly but the system don´t boot and is something weird because also any KDZ file don´t flash
---------- Post added at 05:11 AM ---------- Previous post was at 05:07 AM ----------
Stefere said:
Thanks for reply my message and I don´t know why didn´t work I also try open my phone and follow all the instructions and in my computer the drivers install correctly but the system don´t boot and is something weird because also any KDZ file don´t flash
Click to expand...
Click to collapse
I flash accidently a P700 KDZ because a friend request me the original firmware and I didn´t rename the files and that is why also I am confussed because I follow all your instructions and anything work
Stefere said:
Thanks for reply my message and I don´t know why didn´t work I also try open my phone and follow all the instructions and in my computer the drivers install correctly but the system don´t boot and is something weird because also any KDZ file don´t flash
---------- Post added at 05:11 AM ---------- Previous post was at 05:07 AM ----------
I flash accidently a P700 KDZ because a friend request me the original firmware and I didn´t rename the files and that is why also I am confussed because I follow all your instructions and anything work
Click to expand...
Click to collapse
To open the phone you need to fully brick first. Sorry I tested that image myself and it worked. I don't know how to help you.
neutrondev said:
To open the phone you need to fully brick first. Sorry I tested that image myself and it worked. I don't know how to help you.
Click to expand...
Click to collapse
I will try today if i can flash the KDZ again because like you say is weird that don´t work and also I try to flash a ROM but still nothing
help
when im in eMMC software Download it inst detec my phone i have alrady do what you say

VS985 Stuck in Firmware Update Download Mode - Will not flash KDZ or TOT files

Hello,
I recently purchased a bricked Verizon LG G3 that had bad software and does not appear to have hardware damage.
When I first got it, it was able to enter fastboot mode, and I was able to use fastboot to flash IMG files and regain download mode. After flashing to 24B, the phone would become stuck on the "Andy the Android" splash screen with his wiggling ears, and would not proceed. Next, I tried flashing the 10B TOT file, and it was successful - however now the phone was stuck on the LG logo during bootup. I tried wiping data/cache, but it was unsuccessful.
When I power the phone on now it goes right to Firmware Update Download Mode. When I try flashing using the KDZ or TOT LG Flash Tool programs, they both get stuck on 1% and fail with "Unable to communicate with phone". The device appears to be hard bricked now and I am out of ideas.
Does anyone know what I could try to troubleshoot?
Thank you!
I should also mention that I entered QDLoader 9008 mode and pushed both the extracted KDZ and TOT files to the phone with BoardDiag, but it did not make any difference. I still have access to download mode.
U need to make sure u have right drivers... Did u chage the port settings to COM41 by going into device mangaer under ports see if u have lge device (or something like that) and then check its on COM41
I advise u to use 10B stock .. By tot method...
Here u can find right instructions.. Which i followed when i bricked it..
https://youtu.be/1WgXuxDbmbc
And stock 10B vs985 here...
http://lgg3root.com/lg-g3-stock-factory-firmware/
I have verizon vs985 lg g3 too.. Did all this.. And messaging from it
After stock u can use lgoneclickroot app for pc.. It will automatically root it. Just usb debugging enable.. Then flash new recory n go on to lollipop...
Try the most safe way bro
---------- Post added at 01:28 AM ---------- Previous post was at 01:26 AM ----------
Also if u insist to use 24B for very first time.. U can try changing the USB cable.. Try appropriate one
---------- Post added at 02:06 AM ---------- Previous post was at 01:28 AM ----------
I can understand the pain of having a bricked phone in hand...
Go through this guide.. It will b all good.. Hopefully
minhas729 said:
U need to make sure u have right drivers... Did u chage the port settings to COM41 by going into device mangaer under ports see if u have lge device (or something like that) and then check its on COM41
I advise u to use 10B stock .. By tot method...
Here u can find right instructions.. Which i followed when i bricked it..
https://youtu.be/1WgXuxDbmbc
And stock 10B vs985 here...
http://lgg3root.com/lg-g3-stock-factory-firmware/
I have verizon vs985 lg g3 too.. Did all this.. And messaging from it
After stock u can use lgoneclickroot app for pc.. It will automatically root it. Just usb debugging enable.. Then flash new recory n go on to lollipop...
Try the most safe way bro
---------- Post added at 01:28 AM ---------- Previous post was at 01:26 AM ----------
Also if u insist to use 24B for very first time.. U can try changing the USB cable.. Try appropriate one
---------- Post added at 02:06 AM ---------- Previous post was at 01:28 AM ----------
I can understand the pain of having a bricked phone in hand...
Go through this guide.. It will b all good.. Hopefully
Click to expand...
Click to collapse
I'm trying to follow your steps since I had borked my phone after rooting 24b and installing twrp with autorec. My phone doesn't seem to want to be recognized by ADB anymore... I have installed the verizon drivers repeatedly to no avail. Any suggestions as to where to look to fix this?
U trying kdz or tot method?
---------- Post added at 10:34 AM ---------- Previous post was at 10:31 AM ----------
Use the one tht guy used in provided vdo link..
Try winsows 7 pc.. Windows 8 or 8.1 or 10 will not work for this..
Do U see ur Phone at COM41 ??
Your recovery was actually conflicted with cell.. Bcz u download it bt autorec.. Thy dont give u enogh info.. Always use twrp manager in furure...
U had to install busybox before u flash recovery image...
minhas729 said:
U need to make sure u have right drivers... Did u chage the port settings to COM41 by going into device mangaer under ports see if u have lge device (or something like that) and then check its on COM41
I advise u to use 10B stock .. By tot method...
Here u can find right instructions.. Which i followed when i bricked it..
https://youtu.be/1WgXuxDbmbc
And stock 10B vs985 here...
http://lgg3root.com/lg-g3-stock-factory-firmware/
I have verizon vs985 lg g3 too.. Did all this.. And messaging from it
After stock u can use lgoneclickroot app for pc.. It will automatically root it. Just usb debugging enable.. Then flash new recory n go on to lollipop...
Try the most safe way bro
---------- Post added at 01:28 AM ---------- Previous post was at 01:26 AM ----------
Also if u insist to use 24B for very first time.. U can try changing the USB cable.. Try appropriate one
---------- Post added at 02:06 AM ---------- Previous post was at 01:28 AM ----------
I can understand the pain of having a bricked phone in hand...
Go through this guide.. It will b all good.. Hopefully
Click to expand...
Click to collapse
Thanks for your reply. I tried flashing 10B using LG Flash Tool on two different PCs, using three different USB cables, and it always gets stuck when flashing Modem and then shows "Download FAIL!!" due to "Can't communicate with the Phone". The phone is detected correctly as LGE Mobile for VZW USB Serial Port (COM41). What can I do when LG Flash Tool will not flash? Thanks.
boostedcx said:
Thanks for your reply. I tried flashing 10B using LG Flash Tool on two different PCs, using three different USB cables, and it always gets stuck when flashing Modem and then shows "Download FAIL!!" due to "Can't communicate with the Phone". The phone is detected correctly as LGE Mobile for VZW USB Serial Port (COM41). What can I do when LG Flash Tool will not flash? Thanks.
Click to expand...
Click to collapse
Don't loose hope mate..
U can take it to phone repairer.. They usually come with good solutions.. N it will not cost u more than a 6 to 7 bucks if you take it to market and explain wt it does..
I am pretty sure its all due to cable now..
As it says cant communicate..
For the very first time it did happen to me..
I wasnt using original cable tht came with cell.. I lost tht.. Luckily using the data cable of one of my old nokia phones, tht cable worked .
Keep trying cables..
If u have original that came with it.. Use it.. Or other.. If still same results.. Then market
Thanks for your advice, but I am the phone repairman I've fixed hundreds of LG devices in similar conditions in the past, but this one appears to be very bricked. I've tried 5 cables now, including the original LG cable that came with the device. Same error, fails at 1% progress when flashing Modem.
boostedcx said:
Thanks for your advice, but I am the phone repairman I've fixed hundreds of LG devices in similar conditions in the past, but this one appears to be very bricked. I've tried 5 cables now, including the original LG cable that came with the device. Same error, fails at 1% progress when flashing Modem.
Click to expand...
Click to collapse
Oh i see.. Who knows better than you then...
M pretty sure its not hard bricked.. Else it couldn't get detected...
Any hardware issues found?
minhas729 said:
Oh i see.. Who knows better than you then...
M pretty sure its not hard bricked.. Else it couldn't get detected...
Any hardware issues found?
Click to expand...
Click to collapse
I live in a very rural area, and I am the only Android software repair shop in town. I agree, it is not hard bricked. No hardware issues were found, and I thoroughly inspected the device.
boostedcx said:
I live in a very rural area, and I am the only Android software repair shop in town. I agree, it is not hard bricked. No hardware issues were found, and I thoroughly inspected the device.
Click to expand...
Click to collapse
Hi I would uninstall all LG anything on your computer, download the driver from the LG site. Plug your phone in and get it into download mode. install the LG drivers with your phone plugged into the computer When they are done reboot and let the drivers install to your phone and then try KDZ again. Hope this helps. Good luck
Trying different USB ports and different PCs also can make the difference.
[VK810.4G] [altev] [ViKtory810ROM] official LG G Pad 8.3 Lollipop 36B_00 5.0.2
[VK810.4G] [altev] official LG G Pad 8.3 Lollipop 36B_00 5.0.2 DEBLOAT SCRIPTS and copies of all the files they remove
[VK810.4G] [altev] OTAs, .IMGs and KDZs, oh my
mopartonyg said:
Hi I would uninstall all LG anything on your computer, download the driver from the LG site. Plug your phone in and get it into download mode. install the LG drivers with your phone plugged into the computer When they are done reboot and let the drivers install to your phone and then try KDZ again. Hope this helps. Good luck
Click to expand...
Click to collapse
Did u solve thar problem?
minhas729 said:
Did u solve thar problem?
Click to expand...
Click to collapse
Was not my problem, just trying to help.
I'd say; with windows pc; download lg pc suite and lg mobile recovery tool (unsure of second name)
Install pc suite. When installed, instamm other tool. Use said tool (connected with usb in download mode, I think.) and it should restore the phone
Did it on my lg g3 s d722 after I removed the OS due to a faulty rom (couldn't find correct kdz so..)
Sent from my LG-D722 using XDA Free mobile app
No, I gave up on this device. It may have been fixable, but I was not able to do it.
You tried mobile support tool?
Sent from my LG-D722 using XDA Free mobile app
boostedcx said:
No, I gave up on this device. It may have been fixable, but I was not able to do it.
Click to expand...
Click to collapse
If you gave up on the device, would you be willing to share the software with other users?
Sent from my SM-N910V using XDA Free mobile app

Repair costs of lg p500 brick in india!

Recently I brick my lg p500 while reboot in amon ra thunder G recovery . due I have stock ROM already installed I just unrooted phone and went to service center at Bharuch India. They told me it is easier for them to repair and make it working . because we have no opportunity to use now kdz and there no way to save it .
So anyone please tell me the minimum cost of repair asked by lge repair center.
Here they asked me to give 250 INR. I was shocked in greb my phone and ran away from shop because I have not even 10 INR. :crying:
If possible to flash recovery through fastboot method plz tell me .
Say only if tested because I tried it but unfortunately failed....
niral.naik said:
If possible to flash recovery through fastboot method plz tell me .
Say only if tested because I tried it but unfortunately failed....
Click to expand...
Click to collapse
Can you access the recovery or the system?
I didn't understand from your post.
I can only open fastboot mode but can't detected by PC and second I open emergency mode.
When I don't do any thing phone boots normally as shown in PC detected all modem and other due i installed all drivers properly but reality is phone sticks at Build : RA - THUNDERG -3.0.6-GNM
So I cannot do access any of above
If you want to know whole process before the brick I can tell you
niral.naik said:
If you want to know whole process before the brick I can tell you
Click to expand...
Click to collapse
It will be great, however I'll answer tomorrow.
Haven't been getting much sleep this week, and it's past midnight here, I may fall asleep standing at any moment now.
But you can post the whole process right now if you wish, perhaps someone else will be able to help you by then.
Process before p500 brick!
My p500 was running on stock ginger bread v20d version. As we all know it has ugly android animation so i added boot animation zip file and added a file from cm10.1's media folder to run boot animation .Recovery was Amon Ra thunder G.
I was trying to update busybox through just their free apk (available on play store) . so I was installing it I select advance option and also choose non recommend applets . I found after finishing installation my phone was take more time to wake from screen off . I understand that I made a great done .because nothing like this was happened before in stock ROM . I tried to reboot it but stuck at my own added custom animation . as usual I try to go to recovery and delete this animation file . but now I stuck recovery start up text BUILD :RA THUNDER GNM.
God of android come here to help me please
I do not have 250 Rupees to pay them .?
Why can't you use kdz?
I think that you may be able to use it with the bootloader.
Edit: I found out what you need to do.
First, you need to boot to emergency mode.
Instructions are here, it's the same for the Optimus One, so no need to worry.
http://www.ehow.com/how_12314778_boot-emergency-mode-optimus-t.html
Update: Here are more complete instructions.
Make sure you have installed the LG drivers, and you have the kdz file (full image, not just modem).
How to Flashing LG Optimus One back to Original Firmware
Turn off your cellphone
Press and hold Volume[+] + Power + Back buttons, until your Optimus boot in emergency mode
Connect LG Optimus One to PC (via USB)
tips: maybe it`s a little strange to do, but you can try to shake the phone if it can`t detect.
Run KDZ_FW_UPD.exe
Select Type : 3GQCT
Select PhoneMode : DIAG
tips: if this option failed try EMERGENCY or CS_EMERGENCY
At KDZ Files section, select firmware that you already download
Click launch software update button
tips: someone say that it`s good idea to shake your optimus one with gently to avoid stuck.
Wait until it`s done, unplug the usb cable
Press and hold Volume[-] + HOME + Power buttons
See the firmware version, congratulation you did it.
If you don't have the files, I'll post links for you to download them.
moriel5 said:
Why can't you use kdz?
I think that you may be able to use it with the bootloader.
Edit: I found out what you need to do.
First, you need to boot to emergency mode.
Instructions are here, it's the same for the Optimus One, so no need to worry.
http://www.ehow.com/how_12314778_boot-emergency-mode-optimus-t.html
Update: Here are more complete instructions.
Make sure you have installed the LG drivers, and you have the kdz file (full image, not just modem).
How to Flashing LG Optimus One back to Original Firmware
Turn off your cellphone
Press and hold Volume[+] + Power + Back buttons, until your Optimus boot in emergency mode
Connect LG Optimus One to PC (via USB)
tips: maybe it`s a little strange to do, but you can try to shake the phone if it can`t detect.
Run KDZ_FW_UPD.exe
Select Type : 3GQCT
Select PhoneMode : DIAG
tips: if this option failed try EMERGENCY or CS_EMERGENCY
At KDZ Files section, select firmware that you already download
Click launch software update button
tips: someone say that it`s good idea to shake your optimus one with gently to avoid stuck.
Wait until it`s done, unplug the usb cable
Press and hold Volume[-] + HOME + Power buttons
See the firmware version, congratulation you did it.
If you don't have the files, I'll post links for you to download them.
Click to expand...
Click to collapse
Sir Please post link if possible . Thanks in Advance.
niral.naik said:
Sir Please post link if possible . Thanks in Advance.
Click to expand...
Click to collapse
I have kdz app with all drives but not have image files.
niral.naik said:
I have kdz app with all drives but not have image files.
Click to expand...
Click to collapse
Sorry about being late, I'll post the link in a few minutes.
Update: Here it is, V20D for India.
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW459286573210987654321/V20D_00.kdz
So did you manage to fix the issue?
moriel5 said:
Sorry about being late, I'll post the link in a few minutes.
Update: Here it is, V20D for India.
http://csmgdl.lgmobile.com/dn/downloader.dev?fileKey=FW459286573210987654321/V20D_00.kdz
Click to expand...
Click to collapse
Thanks so much. You saved me Sir . You are great.
moriel5 said:
So did you manage to fix the issue?
Click to expand...
Click to collapse
Sir I will perform it but if you don't mind I want to ask you have you tried it before ?
niral.naik said:
Sir I will perform it but if you don't mind I want to ask you have you tried it before ?
Click to expand...
Click to collapse
Yes, I did so half a year ago, to update my LG Optimus P500H.
Unfortunately there was no update in Israel, and it's firmware was at one of our cellular providers (Pelephone), so I had to use this method to flash a different country's unlocked firmware (some european firmware, I forget which) with the same bands support in the modem, before flashing CM7.1 and TWRP.
It's just been a long time, that's why I didn't remember how to do it.
moriel5 said:
Yes, I did so half a year ago, to update my LG Optimus P500H.
Unfortunately there was no update in Israel, and it's firmware was at one of our cellular providers (Pelephone), so I had to use this method to flash a different country's unlocked firmware (some european firmware, I forget which) with the same bands support in the modem, before flashing CM7.1 and TWRP.
It's just been a long time, that's why I didn't remember how to do it.
Click to expand...
Click to collapse
So will it work for Indian p500 with no cellular provider restrictions?
niral.naik said:
So will it work for Indian p500 with no cellular provider restrictions?
Click to expand...
Click to collapse
It should work with with all P500's, restrictions or no restrictions, it doesn't matter.
I will test on this Sunday. When my laptop comes to home. By the way if it works I promise I will give you 100 Rupiya as donation.

Help Please - Need Stock Rom For: Alcatel Pop 4 (5051x)

Hi
could someone please send me stock rom for Alcatel pop 4, My phone is stuck on Alcatel logo after installing a theme and i have tried everything but i can't find a rom anywhere on internet.
Thank You
I have the same problem and I can´t find any.
GolpeadorMágico said:
I have the same problem and I can´t find any.
Click to expand...
Click to collapse
I have managed to fix it with software upgrade tool.
if u need any help fixing yours let me know
JordieSnipezHD said:
I have managed to fix it with software upgrade tool.
if u need any help fixing yours let me know
Click to expand...
Click to collapse
Yes, please. I try to recover it with the "mobile upgrade" and that not work.
GolpeadorMágico said:
Yes, please. I try to recover it with the "mobile upgrade" and that not work.
Click to expand...
Click to collapse
I could upload twrp backup if help
mygadgetgeek.com said:
I could upload twrp backup if help
Click to expand...
Click to collapse
Please, I´m going to try anything for recover it.
GolpeadorMágico said:
Please, I´m going to try anything for recover it.
Click to expand...
Click to collapse
OK u have to give me bit time I had same problem I wiped mine and couldn't recover it I got another pop 4 backed it up and restore on mine u do need a backup of any kind of your phone as u have to copy my backup into it I try write instructions what I done
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
mygadgetgeek.com said:
OK u have to give me bit time I had same problem I wiped mine and couldn't recover it I got another pop 4 backed it up and restore on mine u do need a backup of any kind of your phone as u have to copy my backup into it I try write instructions what I done
Click to expand...
Click to collapse
Will say I looked on net and tried mobile q and nothing worked just handy I got another phone
---------- Post added at 12:13 AM ---------- Previous post was at 12:12 AM ----------
mygadgetgeek.com said:
OK u have to give me bit time I had same problem I wiped mine and couldn't recover it I got another pop 4 backed it up and restore on mine u do need a backup of any kind of your phone as u have to copy my backup into it I try write instructions what I done
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
Will say I looked on net and tried mobile q and nothing worked just handy I got another phone
Click to expand...
Click to collapse
I will never buy another there's no development or ROMs nothing I have installed exposed and root
mygadgetgeek.com said:
OK u have to give me bit time I had same problem I wiped mine and couldn't recover it I got another pop 4 backed it up and restore on mine u do need a backup of any kind of your phone as u have to copy my backup into it I try write instructions what I done
---------- Post added at 12:12 AM ---------- Previous post was at 12:10 AM ----------
Will say I looked on net and tried mobile q and nothing worked just handy I got another phone
---------- Post added at 12:13 AM ---------- Previous post was at 12:12 AM ----------
I will never buy another there's no development or ROMs nothing I have installed exposed and root
Click to expand...
Click to collapse
Yeah, this mobile sucks. My mom lend me it and its horrible. I lost the system (you know) and the mobile update (Alcatel) don´t do any. I put it, the mobile sometimes its not recognized... No more. Alcatel, not again.
mygadgetgeek.com said:
I could upload twrp backup if help
Click to expand...
Click to collapse
if you could that would be amazing. I am stuck in a locked bootloader and fastboot doesn't detect the phone (altough adb does) so I cannot unlock it.
zbaracki said:
if you could that would be amazing. I am stuck in a locked bootloader and fastboot doesn't detect the phone (altough adb does) so I cannot unlock it.
Click to expand...
Click to collapse
Can u get into twrp recovery
mygadgetgeek.com said:
Can u get into twrp recovery
Click to expand...
Click to collapse
yes.
I tried to flash supersu from twrp and since then I'm stuck in bootloader (couldn't unlock bootloader due to fastboot not seeing the phone). I still can get to recovery, but can't boot up the system.
Alcatel's Mobile Upgrade Q doesn't work for me either (tried on 2 different PC's).
I hope restoring clean non-rooted boot/system will help, if somebody can share the backup files.
zbaracki said:
yes.
I tried to flash supersu from twrp and since then I'm stuck in bootloader (couldn't unlock bootloader due to fastboot not seeing the phone). I still can get to recovery, but can't boot up the system.
Alcatel's Mobile Upgrade Q doesn't work for me either (tried on 2 different PC's).
I hope restoring clean non-rooted boot/system will help, if somebody can share the backup files.
Click to expand...
Click to collapse
Which Mobile Upgrade Q are you using? Try to use 5.0.3 version. Tried both on my 64bit Windows 10 and 7 for my 5051x Optus locked phone. But you need to manually put your phone to download mode (while your phone completely off, press all volume up + volume down + power), then plug in your phone, start the program and follow the prompt.
Had to reflash my phone numerous time, because supersu seems to brick the phone, while kingroot lost its root every reboot.
Cryonics said:
Which Mobile Upgrade Q are you using? Try to use 5.0.3 version. Tried both on my 64bit Windows 10 and 7 for my 5051x Optus locked phone. But you need to manually put your phone to download mode (while your phone completely off, press all volume up + volume down + power), then plug in your phone, start the program and follow the prompt.
Had to reflash my phone numerous time, because supersu seems to brick the phone, while kingroot lost its root every reboot.
Click to expand...
Click to collapse
which driver do you have installed? (what shows up in device manager?) When the phone is in download mode, my PC doesn't detect it. after several seconds the phone exits download mode, and then gets detected, but it doesn't auto-install any driver, so I have to manually choose something.
Still, if someone could send me full backup from TWRP, I could try to restore it on the phone and get it working this way.
zbaracki said:
which driver do you have installed? (what shows up in device manager?) When the phone is in download mode, my PC doesn't detect it. after several seconds the phone exits download mode, and then gets detected, but it doesn't auto-install any driver, so I have to manually choose something.
Still, if someone could send me full backup from TWRP, I could try to restore it on the phone and get it working this way.
Click to expand...
Click to collapse
Qualcomm HS_USB qdloader 9008 The driver you need is found:
http://www.androidbrick.com/download/latest-2017-qualcomm-diag-qd-loader-windows-10-drivers-signed/
or
http://www.androidbrick.com/download/qualcomm-qdloader-hs-9008-edl-usb-driver/
You may need to manually install the driver in device manager. Its under show all>qualcomm incorperated>Qualcomm HS_USB qdloader 9008
bulletbeef said:
Qualcomm HS_USB qdloader 9008 The driver you need is found:
http://www.androidbrick.com/download/latest-2017-qualcomm-diag-qd-loader-windows-10-drivers-signed/
or
http://www.androidbrick.com/download/qualcomm-qdloader-hs-9008-edl-usb-driver/
You may need to manually install the driver in device manager. Its under show all>qualcomm incorperated>Qualcomm HS_USB qdloader 9008
Click to expand...
Click to collapse
Thanks! With this driver it finally recognized the phone and flashed it successfully (using the latest Mobile Upgrade Q 5.1.8).
You're a saviour!
zbaracki said:
Thanks! With this driver it finally recognized the phone and flashed it successfully (using the latest Mobile Upgrade Q 5.1.8).
You're a saviour!
Click to expand...
Click to collapse
i had the same issue searched everywhere and nobody gave good drivers or complete answers not even alcatel themselves, so i figured it out, that's what this community is for
i have the same problem here. i Installl the driver and all try the download mode but nothing just happends... It wont reconise the phone.. My phone is alcatel 5051X i did just a normal factory reset and then the instalation just crash every time and keeps popping up unfortunately setup wizard has stoped and wont go anywhere so i have been trying to get stock firmware eveywhere but nothing seems to help....
---------- Post added at 03:16 AM ---------- Previous post was at 02:51 AM ----------
harrinus said:
i have the same problem here. i Installl the driver and all try the download mode but nothing just happends... It wont reconise the phone.. My phone is alcatel 5051X i did just a normal factory reset and then the instalation just crash every time and keeps popping up unfortunately setup wizard has stoped and wont go anywhere so i have been trying to get stock firmware eveywhere but nothing seems to help....
Click to expand...
Click to collapse
ok now i got that solved it was a problem of win 10 missing android driver but now the software just jams at 2 % and eventually crash... the closest model i have found int he software is alcatel 5051 but mine 5051X so do i need to use some other version or what? just says read terminal information failed check the phone status...
well now i got all that solved but the upgrader says there is no newer one than there is and wont do anything with the old 1 so my original problem stays..... the instalation crashes every time... is there anyway i could just swipe the whole instalation away sense it seems to be broken someway
I succesefuly installed the stock rom witout mobile upgrade mobil
harrinus said:
i have the same problem here. i Installl the driver and all try the download mode but nothing just happends... It wont reconise the phone.. My phone is alcatel 5051X i did just a normal factory reset and then the instalation just crash every time and keeps popping up unfortunately setup wizard has stoped and wont go anywhere so i have been trying to get stock firmware eveywhere but nothing seems to help....
---------- Post added at 03:16 AM ---------- Previous post was at 02:51 AM ----------
ok now i got that solved it was a problem of win 10 missing android driver but now the software just jams at 2 % and eventually crash... the closest model i have found int he software is alcatel 5051 but mine 5051X so do i need to use some other version or what? just says read terminal information failed check the phone status...
well now i got all that solved but the upgrader says there is no newer one than there is and wont do anything with the old 1 so my original problem stays..... the instalation crashes every time... is there anyway i could just swipe the whole instalation away sense it seems to be broken someway
Click to expand...
Click to collapse
I had the same issue i was unable to install the stock rom using mobile upgrade it will say this is the last firmware there is no new update so i searched the web and i found a solution finaly its callad a software named sugar
what you need is a usb cable a good internet conection and drivers installed
make sure to follow instruction of the software to download
you will find the all instructions on this russian thread https://4pda.ru/forum/index.php?showtopic=675134&st=440#entry46026273
if you need any help just send me a pm
mygadgetgeek.com said:
I could upload twrp backup if help
Click to expand...
Click to collapse
Removed:
mygadgetgeek.com said:
I could upload twrp backup if help
Click to expand...
Click to collapse
Can you upload your twrp backup, or at least your stock recovery pleeease? I really need it since this is my work phone and it should be as stock as it came when they check it.

Categories

Resources