Related
Dear Team ,,
I am desperately looking for helo because i think i bricked my New EVO 3DHTC_Europe_1.20.401.8_Radio_10.59.9020.00_10.15.9020.06 Which is rooted and S-off via revolutionary method succefully .. I tried installing a newer radio though PCMG.zip method n it made me suffer a lot that i cannot access or even flash recovery... while during update process of radio i receive this error
"Partition Update Fail"
I m just stuck in bootloader cant even unlock through HTC method to install Original RUU....
PLease someone give me some clue...
My Current Hboot version is 1.49.1107 , S-OFF Revolutionary..
Do you have the ADB, fast boot and HTC drivers installed? You need it for the following:
Plug in your phone to your computer. Open CMD, and browse to your adb installation. E.g cd C:/Program Files/Android/android-sdk/platform-tools/
Then type adb getvar cid.
Remember that number. Find the appropriate radio for your CID number and flash that.
Sent from my Wildfire using Tapatalk 2 Beta-5
as per the instructions... i figured out my cid num which is cidnum: HTC__001...but i wonder that i was flashing the right radio version for my mobile ..... I will really appreciate if u explain it a little more,....
mani00007 said:
Dear Team ,,
I am desperately looking for helo because i think i bricked my New EVO 3DHTC_Europe_1.20.401.8_Radio_10.59.9020.00_10.15.9020.06 Which is rooted and S-off via revolutionary method succefully .. I tried installing a newer radio though PCMG.zip method n it made me suffer a lot that i cannot access or even flash recovery... while during update process of radio i receive this error
"Partition Update Fail"
I m just stuck in bootloader cant even unlock through HTC method to install Original RUU....
PLease someone give me some clue...
My Current Hboot version is 1.49.1107 , S-OFF Revolutionary..
Click to expand...
Click to collapse
You said you are stuck in bootloader and cant unlock with HTC method to use a RUU.............
Thats good for you , as far as you dont need to be unlocked to use a RUU.exe.
If you unlock your phone via htcdev.com you cannot use RUU.
My concern is not to install ruu but only to get my evo back to work... which i can not figure out how to.....and friend It was meant to be reclocked....I cant understand why i cant access my recovery..neither i m able to flash it,,, If some one please help please since my phone starts and goes in boot loader automatically n there if i try flash any thing throuigh fastboot it gives me an error in retrun ///
mani00007 said:
My concern is not to install ruu but only to get my evo back to work... which i can not figure out how to.....and friend It was meant to be reclocked....I cant understand why i cant access my recovery..neither i m able to flash it,,, If some one please help please since my phone starts and goes in boot loader automatically n there if i try flash any thing throuigh fastboot it gives me an error in retrun ///
Click to expand...
Click to collapse
Thats what i wanted to tell run a RUU.exe made for your phone, it should get it to work according to me. But I m not 100% sure.
flashing radio
hello flashing radio's can be very tricky the file may have been corupt or youmay have flashed the wrong ruu and also where did you download this file i hope you flashed a PG86IMG.zip if you did go back to the thread that you downloaded from and make sure you that ruu is for your device and if it isnt that thread you downloaded from should have other ruu's that are for your device and make sure you read everything on that thread before downloading and flashing
mnomaanw said:
Thats what i wanted to tell run a RUU.exe made for your phone, it should get it to work according to me. But I m not 100% sure.
Click to expand...
Click to collapse
in addition to above "FAILED (remote: image update error)" is the message when do fastboot command to write/flash any thing over the phone....
plz plz plz help me...n i think i cant run ruu since i m s off......please some solution.,....
flashing radio's
ok i see where you made your mistake dont use exe file's. you should be using PG86IMG.zip and all you had to do is copy it to the root folder of your sd card and power off and battery pull and put battery back in volume down and press power boots into bootloader and it will find the zip file and it prompt start update you press volume up for yes and set back and let it flash you new radio and when it is done delete it from the root folder of your sd card and enjoy
---------- Post added at 09:02 AM ---------- Previous post was at 08:51 AM ----------
http://forum.xda-developers.com/showthread.php?t=1218196 here it is this is what you should be using
What you have is called a soft brick. The radio you flashed was not compatible with your phone. First remove your SD from your phone. Then put it in your pc/laptop via card reader and remove whatever zip you were trying to flash. Then you have to find the correct ruu that has a compatible radio and run it from your pc.
Root-Hack_Mod*Always\
laie1472 said:
What you have is called a soft brick. The radio you flashed was not compatible with your phone. First remove your SD from your phone. Then put it in your pc/laptop via card reader and remove whatever zip you were trying to flash. Then you have to find the correct ruu that has a compatible radio and run it from your pc.
Root-Hack_Mod*Always\
Click to expand...
Click to collapse
i have tried already the original ruu or my phone which is RUU_Shooter_U_HTC_Europe_1.20.401.8_Radio_10.59.9020.00_10.15.9020.06_M_release_219793_signed... but didnt work because i m s off n unlocked pershaps and to run ruu i need to be relocked first.....browing different forum i have come accrossed this thread
http://forum.xda-developers.com/showthread.php?t=805612&page=4
their is some read me file .,... please tell me if i should go through that method .... to unbrick it,,,, if yes then i cant find the evo_softbrick.zip if some one can please shed some light on it,,, i will be really thankfull.,.
I was following a tutorial on here about rooting my HTC Evo 3D Rogers, everything went smoothly, except I accidentally typed a wrong command and replaced ClockworkMod Recovery with the boot files... I know I am f***ed.... But I want to know is there anything I can do to hard reset or even replace the boot files if any of you guys have the files? When I boot my phone now, it just loads the HTC welcome screen and goes straight into the ClockworkMod Recovery...
Please, I am so worried about this... Hopefully you guys can help me out...
EDIT: I can still get into the HBOOT by volume down + power button.. hope that helps..
beasaw said:
I was following a tutorial on here about rooting my HTC Evo 3D Rogers, everything went smoothly, except I accidentally typed a wrong command and replaced ClockworkMod Recovery with the boot files... I know I am f***ed.... But I want to know is there anything I can do to hard reset or even replace the boot files if any of you guys have the files? When I boot my phone now, it just loads the HTC welcome screen and goes straight into the ClockworkMod Recovery...
Please, I am so worried about this... Hopefully you guys can help me out...
EDIT: I can still get into the HBOOT by volume down + power button.. hope that helps..
Click to expand...
Click to collapse
have u tried flash another ROM by CWM...??
or can u stil enter fastboot from HBoot...?? try flash firmware from there...
sorry if i'm wrong.... just trying to help....
I'm not a pro at these things, but I can tell you that I can still open up fastboot,
I just need the original boot files and instructions on how to overwrite my mistaken ones and I think I'm good...
Would you be able to hook me up with those? :l
What's your hboot version and are you s-on or s-off right now?
if you made a backup before doing this you should restore that in recovery. If not then download a rom and flash it in recovery. You might need to flash the boot.img seperately in fastboot if you are s-on
EM|NEM said:
What's your hboot version and are you s-on or s-off right now?
if you made a backup before doing this you should restore that in recovery. If not then download a rom and flash it in recovery. You might need to flash the boot.img seperately in fastboot if you are s-on
Click to expand...
Click to collapse
In my Evo, it says:
Shooter_U PVT SHIP S-ON RL
HBOOT- 1.53.007
eMMC-boot
And also, which rom should I download and how do I flash it in recovery? As I said before, I'm quite a noob at these kind of things :l
Does it say locked or unlocked on the first line? If its locked just run an RUU. This will get you back to stock.
EM|NEM said:
Does it say locked or unlocked on the first line? If its locked just run an RUU. This will get you back to stock.
Click to expand...
Click to collapse
It says unlocked, I unlocked the phone then accidentally changed the boot directory onto the clockwork recovery program ( I assume it overwrote the files )....
I've ran RUU twice and came up with Error 15... (It's the RUU Sprint one though).
First of all your phone is gsm model so don't ever try to run a sprint ruu. That's cdma. Get a rogers ruu. And you have to relock before running ruu
Sent from my shooteru
EM|NEM said:
First of all your phone is gsm model so don't ever try to run a sprint ruu. That's cdma. Get a rogers ruu. And you have to relock before running ruu
Sent from my shooteru
Click to expand...
Click to collapse
I ran one but it failed so I don't think it mattered too much.
Would there be a link for me to follow the instructions in relocking my phone?
Put your phone in fastboot. The command to lock is "fastboot oem lock" ( without the commas )
---------- Post added at 06:09 PM ---------- Previous post was at 06:06 PM ----------
Look here for ruu
http://shipped-roms.com/index.php?category=android&model=Shooter
EM|NEM said:
Put your phone in fastboot. The command to lock is "fastboot oem lock" ( without the commas )
---------- Post added at 06:09 PM ---------- Previous post was at 06:06 PM ----------
Look here for ruu
http://shipped-roms.com/index.php?category=android&model=Shooter
Click to expand...
Click to collapse
I've gotten the RUU, and you're saying....
I'll put phone in fastboot, plug usb, run "fastboot oem lock"
And where does the RUU come in?
Again, sorry for my inexperienced towards this :/
EDIT: I've relocked my phone but none of the RUUs found on the site seems to be working...
Update: Finally found a RUU that worked after I relocked my phone, thanks Eminem for helping me!!! You are the best!
Glad you got your phone working
just make sure you dont run a wrong command next time
Can you post your solutions on here so other can know too.
I understand most new users don't read threads, but there are those few who do and knowing where you got the RUU to solve your issue would help them a lot.
oohaylima said:
Can you post your solutions on here so other can know too.
I understand most new users don't read threads, but there are those few who do and knowing where you got the RUU to solve your issue would help them a lot.
Click to expand...
Click to collapse
Alright,
1) I booted into Fastboot, and relocked my phone with the cmd "fastboot oem lock"
2) After relocking, I restarted and went into fastboot USB and ran a RUU found in
http://shipped-roms.com/index.php?category=android&model=Shooter (be sure to check the version numbers and the branding of the phone, pick the right version is very important!)
3) Phone should take some time to replace all the files and once you restart it it's all back to normal , you can then once again unlock it as you wish.
Hello all,
I'm Beginner with htc, i have problem with boot loop, i have done lot of search in the internet and i applied many procedures but i couldn't resolve the problem.
My phone is :
HTC EVO 3D GSM
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
RADIO-11.25.3504.06_M
OpenDSP-v02.6.0.2226.00.02.02
eMMC-boot
Can i have your helps please?
Thank you very much
Best regards,
Dear beginner, this is HTC One (2013) forum
Sent from my Desire HD using Tapatalk 2
Which rom are you trying to boot? Because you are s-on you need to flash boot.img seperately in fastboot. OR you could use 4EXT recovery with smartflash turned on.
EM|NEM said:
Which rom are you trying to boot? Because you are s-on you need to flash boot.img seperately in fastboot. OR you could use 4EXT recovery with smartflash turned on.
Click to expand...
Click to collapse
Thank you very much for your replay,
Sorry for this late response, i was late because i have post my problem in oder thread at this link ( http://forum.xda-developers.com/showthread.php?p=38896827#post38896827 )
i have use all ruu.exe available in this site ( http://androidfiles.org/ruu/?dir=Shooter ) that have the same radios like my phone but it doesn't completed, the ruu.exe show me the error that my phone is non-compatible with this ruu,
The ruu that i have used from the ()are:
RUU_SHOOTER_U_ICS_35_S_hTC_Asia_WWE_3.28.707.1_Rad io_11.77.3504.00U_11.25.3504.06_M_release_264110_s igned.exe
RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_Radio _11.77.3504.00U_11.25.3504.06_M_release_262714_sig ned.exe
RUU_SHOOTER_U_ICS_35_S_Rogers_WWE_3.28.631.1_Radio _11.77.3504.00U_11.25.3504.06_M_release_262715_sig ned.exe
Please, can you send me a link for any ruu or rom works with my phone described above,?
Thank you very much for your all collaborations and helps,
Best regards,
aagrou said:
Thank you very much for your replay,
Sorry for this late response, i was late because i have post my problem in oder thread at this link ( http://forum.xda-developers.com/showthread.php?p=38896827#post38896827 )
i have use all ruu.exe available in this site ( http://androidfiles.org/ruu/?dir=Shooter ) that have the same radios like my phone but it doesn't completed, the ruu.exe show me the error that my phone is non-compatible with this ruu,
The ruu that i have used from the ()are:
RUU_SHOOTER_U_ICS_35_S_hTC_Asia_WWE_3.28.707.1_Rad io_11.77.3504.00U_11.25.3504.06_M_release_264110_s igned.exe
RUU_SHOOTER_U_ICS_35_S_HTC_Europe_3.28.401.1_Radio _11.77.3504.00U_11.25.3504.06_M_release_262714_sig ned.exe
RUU_SHOOTER_U_ICS_35_S_Rogers_WWE_3.28.631.1_Radio _11.77.3504.00U_11.25.3504.06_M_release_262715_sig ned.exe
Please, can you send me a link for any ruu or rom works with my phone described above,?
Thank you very much for your all collaborations and helps,
Best regards,
Click to expand...
Click to collapse
First of all, since you are using a smarphone, you should try and be a bit smart yourself. From a logical standpoint, those ruu have something different: on one says ASIA, on one EUROPE, and on one Rogers (which I can only assume it is linked to the us version, probably CDMA Evo 3D). If you live and bought the phone from Europe, it seems to me you should try the Europe RUU, right? If from Asia, the Asia one and so forth. Simple logic.
Secondly, if you would have read the vast quantity of threads and tutorials about this, you should have started your phone in hboot (Power button+Volume Down), select Fastboot by pressing the Power button, connect your phone to your pc, and in cmd write "fastboot oem lock". Also preferably a full wipe to be done in recovery. Once those steps were performed, the logically chosen RUU would work without any errors
posedatull said:
First of all, since you are using a smarphone, you should try and be a bit smart yourself. From a logical standpoint, those ruu have something different: on one says ASIA, on one EUROPE, and on one Rogers (which I can only assume it is linked to the us version, probably CDMA Evo 3D). If you live and bought the phone from Europe, it seems to me you should try the Europe RUU, right? If from Asia, the Asia one and so forth. Simple logic.
Secondly, if you would have read the vast quantity of threads and tutorials about this, you should have started your phone in hboot (Power button+Volume Down), select Fastboot by pressing the Power button, connect your phone to your pc, and in cmd write "fastboot oem lock". Also preferably a full wipe to be done in recovery. Once those steps were performed, the logically chosen RUU would work without any errors
Click to expand...
Click to collapse
thank you for your replay,
I have done all of that (wip all in recovery, lock my phone, install the ruu.exe). i did that for all the ruu.exe described above but it doesn't work :cryingerror ruu no compatible).
do you know any ruu work on my phone please?
my phone is HTC EVO 3D GSM(described above)
thank you a lot,
best regards
What usb cable are you using, and what usb itself? The ruu will not work on usb 1.1 or 3.0, only on usb 2.0 . If you use a pc, plug it in the back, directly in a usb from a mainboard, not in the front usb or through a hub
Which carrier was your phone on before? Make sure you use the correct RUU for your phone
EDIT: I see its already been explained
EM|NEM said:
Which carrier was your phone on before? Make sure you use the correct RUU for your phone
EDIT: I see its already been explained
Click to expand...
Click to collapse
thank you for your replay.
i don't know which is the first ruu of my phone, because i have got it with a bootloop problem.
do you know the original ruu for my phoene described above?
thank you for you collaborations.
best regards.
Boot into bootloader and run this command in cmd: "fastboot getvar cid"
this should give you your CID. might help in figuring out what your original rom was
---------- Post added at 12:32 AM ---------- Previous post was at 12:16 AM ----------
been googling your prob for a while and there is a possibility you had an arabic rom/firmware.
If you have HTC__J15 cid then run this RUU (the ics one): http://forum.xda-developers.com/showthread.php?t=1282840
EM|NEM said:
Boot into bootloader and run this command in cmd: "fastboot getvar cid"
this should give you your CID. might help in figuring out what your original rom was
---------- Post added at 12:32 AM ---------- Previous post was at 12:16 AM ----------
been googling your prob for a while and there is a possibility you had an arabic rom/firmware.
If you have HTC__J15 cid then run this RUU (the ics one): http://forum.xda-developers.com/showthread.php?t=1282840
Click to expand...
Click to collapse
thank you. i will test that thid night and i inform you tomorow
Best regards,
EM|NEM said:
Boot into bootloader and run this command in cmd: "fastboot getvar cid"
this should give you your CID. might help in figuring out what your original rom was
---------- Post added at 12:32 AM ---------- Previous post was at 12:16 AM ----------
been googling your prob for a while and there is a possibility you had an arabic rom/firmware.
If you have HTC__J15 cid then run this RUU (the ics one): http://forum.xda-developers.com/showthread.php?t=1282840
Click to expand...
Click to collapse
the cid that i got with the command "fastboot getvar cid" is "cid: VODAP304".
Where can i find the the original rom,
thank you a lot,
best regards,
aagrou said:
the cid that i got with the command "fastboot getvar cid" is "cid: VODAP304".
Where can i find the the original rom,
thank you a lot,
best regards,
Click to expand...
Click to collapse
The Europe ruu should work for that cid... Nonetheless, I will look a bit more into it later when I get home, to see if I can find any more details
You probably need a vodafone ruu but i can't seem to find an ICS one
posedatull said:
The Europe ruu should work for that cid... Nonetheless, I will look a bit more into it later when I get home, to see if I can find any more details
Click to expand...
Click to collapse
thank you for your collaboration,
Just for information, i have tested the europe ruu.exe but doesn't work.
Best regards,
Be sure to plug the phone in a usb 2.0 in the computer (one in the back, NOT in the front) to be sure it works properly. Ruus have problems on usb 1.1 and even on 3.0. Also try replacing your data cable, it might be faulty.
If you wiped everything in recovery and then oem locked hboot through adb, the europe ruu should have worked. Since it didnt, i must assume the problem is either with the cable used or with the usb port.
Also an idea might be to try and download the ruu again, maybe there was an error during the download
Theres something else you can try too. download the zip RUU. place this on your sd card and flash in bootloader
EM|NEM said:
Theres something else you can try too. download the zip RUU. place this on your sd card and flash in bootloader
Click to expand...
Click to collapse
thank all for your collaborations,
I have done this but it doesn't work, sorry for all and thank you.
do you know other ruu?
best regards
Well if you cant RUU you should try to get a custom rom to boot. First do these steps:
Unlock your bootloader.
Flash 4EXT recovery in fastboot. Then boot into recovery and turn on smartflash in tools menu.
Download Viper3D rom (the latest one) and transfer it to your sdcard.
Boot into recovery
wipe data/factory reset, wipe cache+dalvik
install viper3d rom. It will take a while, around 10 mins on synergy 4EXT alignment.
reboot and hope it boots
EM|NEM said:
Well if you cant RUU you should try to get a custom rom to boot. First do these steps:
Unlock your bootloader.
Flash 4EXT recovery in fastboot. Then boot into recovery and turn on smartflash in tools menu.
Download Viper3D rom (the latest one) and transfer it to your sdcard.
Boot into recovery
wipe data/factory reset, wipe cache+dalvik
install viper3d rom. It will take a while, around 10 mins on synergy 4EXT alignment.
reboot and hope it boots
Click to expand...
Click to collapse
Thank you,
I have boot loop after installation,
regards,
Ok, so I tired to dabble in custom roms and I got burnt!!!
First things first,
HTC One X+ (International)
Version Main: 1.17.708.1
CID: HTC_622
S-On
HBOOT: 1.35.0000
Radio: 3.1204.168.32
I'm trying to RUU the device back to the stock and then never tinker again!
Can someone please step me through this, all the links I'm finding are dead or the RUU doesn't run.
Many thanks =)
Get hasoons20000 one x+ toolkit it has a link for ruu
Gave this a shot, I cannot find the appropriate RUU for my device.
****...
CJMilsey said:
Gave this a shot, I cannot find the appropriate RUU for my device.
****...
Click to expand...
Click to collapse
What country did you buy it from and what is your CID?
I bought it online (from Asia) The CID is 622 as above.
Addicted2xda said:
What country did you buy it from and what is your CID?
Click to expand...
Click to collapse
Bump
CJMilsey said:
Bump
Click to expand...
Click to collapse
Refer to the posting rules. You should not bump a thread within 24 hours...
You can download the RUU (ENRC2B) from this :
http://forum.xda-developers.com/showthread.php?t=2094118
you need to relock your bootloader before running the RUU
http://www.androidfiles.org/ruu/get...Radio_3.1204.168.32_release_299722_signed.exe
I'm sorry, I must have missed that one :/
I Tried this before but the RUU used didn't work, but I'll try to re-download and go from there.
(RUU_ENRC2B_U_JB_45_hTC_Asia_WWE_1.17.707.1_Radio_3.1204.168.32_release_299722_signed.exe)
Will it be a problem that my phone is 1.17.708.1 and that this is 1.17.707.1 (0.0.001 lower)?
Also, do I need to flash the stock recovery. And If so where would I go about getting it?
You will only have to relock the bootloader again and then (while in fastboot) run the RUU. Remember that you will lose everything on the device.
To relock the bootloader use Hansoon's toolkit. It has all the commands build in for easy use.
"Wrong CID" I'm not sure why this is wrong. 662 came back from fastboot getvar cid, and does indeed correspond to Hong Kong.
What would you advise from here dear sir?
CJMilsey said:
"Wrong CID" I'm not why this is wrong. 662 came back from fastboot getvar cid, and does indeed correspond to Hong Kong.
What would you advise from here dear sir?
Click to expand...
Click to collapse
Are you sure it's a generic HK CID? And not an operator locked one? Maybe you need the RUU from a particular operator.....
Sent from my HTC One X+ using Tapatalk 4 Beta
AndroHero said:
Are you sure it's a generic HK CID? And not an operator locked one? Maybe you need the RUU from a particular operator.....
Sent from my HTC One X+ using Tapatalk 4 Beta
Click to expand...
Click to collapse
I looked up the CID and it's just for HK, the phone came unlock so I doubt it needs a locked RUU. But hey, I've been wrong before.
Is there any reason the phone would not accept the correct RUU?
Okk,
This might seem a bit weird but I had the same issue with my Intl HOX+ and I have given it to hTC and they asked me to shell out aroun 18K to change the motherboard! (Which of course we all know is not required since this is a software issue).
So here is what I did:
1. I relocked the boot loader (I hope you have the unlock_code.bin with you, else get it from hTCDev)
2. Of course it started giving relocked security warning.
3. Again unlocked the boot loader and voila - it booted straight in to Elegancia!
This essentiially happens because unlocking the bootloader formats all the partitions except system and boot (I guess, because my media files were gone...).
See if this gets you through.
But DO IT AT YOUR OWN RISK!
I am talking about International HOX+, I do not know if ATT works in a different way.
Unfortunately that hasn't worked and I'm still stuck with the stall during boot :/
I think my best bet will the RUU, but I just can't get one that will work.
Do you know a ROM that I could side-load onto my device and just use it with that?
Thanks
Addicted2xda said:
Okk,
This might seem a bit weird but I had the same issue with my Intl HOX+ and I have given it to hTC and they asked me to shell out aroun 18K to change the motherboard! (Which of course we all know is not required since this is a software issue).
So here is what I did:
1. I relocked the boot loader (I hope you have the unlock_code.bin with you, else get it from hTCDev)
2. Of course it started giving relocked security warning.
3. Again unlocked the boot loader and voila - it booted straight in to Elegancia!
This essentiially happens because unlocking the bootloader formats all the partitions except system and boot (I guess, because my media files were gone...).
See if this gets you through.
But DO IT AT YOUR OWN RISK!
I am talking about International HOX+, I do not know if ATT works in a different way.
Click to expand...
Click to collapse
I had a small bootloader problem and was just surfing this section.I used your method of relocking and again unlocking and my problem was solved.I found it obligatery for me to thank you.
---------- Post added at 10:30 AM ---------- Previous post was at 10:21 AM ----------
CJMilsey said:
Unfortunately that hasn't worked and I'm still stuck with the stall during boot :/
I think my best bet will the RUU, but I just can't get one that will work.
Do you know a ROM that I could side-load onto my device and just use it with that?
Click to expand...
Click to collapse
I have unbricked mine by efforts of two long days and nights from about same problem. Provide the details and I will try to help you out,
1. can you boot to recovery.
2. If yes.which recovery you use.
3. what were you doing when this happened.
faandrabi said:
I have unbricked mine by efforts of two long days and nights from about same problem. Provide the details and I will try to help you out,
1. can you boot to recovery.
2. If yes.which recovery you use.
3. what were you doing when this happened.
Click to expand...
Click to collapse
1. No recovery works, and by mistake I performed a full erase with TWRP (don't ask me how, I honestly don't know why I did this) so despite all that they don't even exist anymore.
3. I flashed to Boot File as I couldn't get CM10.1 (Lior's HOX+ plug) to install and considered that my solve it. (I was wrong)
From this stuff I'm pretty sure it's broke, but I can get to the boot loader and recovery. Though I ran the appropriate (so I thought) RUU and it didn't work due to CID which stumped me.
CJMilsey said:
1. No recovery works, and by mistake I performed a full erase with TWRP (don't ask me how, I honestly don't know why I did this) so despite all that they don't even exist anymore.
3. I flashed to Boot File as I couldn't get CM10.1 (Lior's HOX+ plug) to install and considered that my solve it. (I was wrong)
From this stuff I'm pretty sure it's broke, but I can get to the boot loader and recovery. Though I ran the appropriate (so I thought) RUU and it didn't work due to CID which stumped me.
Click to expand...
Click to collapse
flash twrp through fasboot as only twrp provides side load option.
when twrp is flashed ,boot to recovery.side load incertcoin rom through hasoons toolkit.
don't worry about 707 or 708 etc.Mine was 707.1 but i am using incertcoin which is 401.3
after falshing incertcoin if it is again in boot loop then
use this command from adb
adb shell
wipe data
and reboot
you will be done.
CJMilsey said:
1. No recovery works, and by mistake I performed a full erase with TWRP (don't ask me how, I honestly don't know why I did this) so despite all that they don't even exist anymore.
3. I flashed to Boot File as I couldn't get CM10.1 (Lior's HOX+ plug) to install and considered that my solve it. (I was wrong)
From this stuff I'm pretty sure it's broke, but I can get to the boot loader and recovery. Though I ran the appropriate (so I thought) RUU and it didn't work due to CID which stumped me.
Click to expand...
Click to collapse
I hope you are on TWRP 2.5? If not update it...
And then use adb sideload
Hi,
I have the exact same problem.. I can get to TWRP recovery and HBOOT and my PC only detects the phone if its in recovery.
my CID is HTC__001.
I am trying to find a working RUU to run..
I tried this one: RUU_ENRC2B_U_JB_45_hTC_Asia_TW_1.14.709.17_Radio_3.1204.167.31_release_291089_signed.exe
(But that didn't work)
Any suggestions?
Thanks in advance.
rmuruga said:
Hi,
I have the exact same problem.. I can get to TWRP recovery and HBOOT and my PC only detects the phone if its in recovery.
my CID is HTC__001.
I am trying to find a working RUU to run..
I tried this one: RUU_ENRC2B_U_JB_45_hTC_Asia_TW_1.14.709.17_Radio_3.1204.167.31_release_291089_signed.exe
(But that didn't work)
Any suggestions?
Thanks in advance.
Click to expand...
Click to collapse
download incertcoin rom from hox+ android development & hasoon toolkit v2.4
boot in recovery
connect to pc
run onex+.exe and side load the rom
after it is done flash boot.img inside rom through fasboot command
and you will be done
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
mhnx said:
Hello my friend, the reason you can't load the pg86img is because you have unlocked bootloader. The fastboot commands could help us a lot, did you follow the controlbear instructions in the correct order? I think there is a way through windows with exe files I don't remember well because I did S-OFF 3years+ before. If you want we can try together some time. If you want for start we can flash 4ext recovery and a custom rom so your phone can boot.
Click to expand...
Click to collapse
Hi there, I didn't know with having the bootloader unlocked that it would cause any issues, but there you go!
Yeah, if there's a guide to flashing the 4EXT Recovery and a custom rom that would be great!
I have a fair idea of how to do it, but don't want to try anything without having someone of greater knowledge point me in the right direction
Thanks!
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
skylirizm said:
Just an update, I did come across a thread to flash 4EXT Recovery onto my Evo 3D.
Put Recovery.img into my platform-tools folder, used the fastboot command, it said sending and OK.
Selected recovery and still boot loops. No idea where to go from here now
Click to expand...
Click to collapse
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
mhnx said:
Sorry for being late, I had some problems with my internet connection. Can you boot into recovery? Power button + Vol- and choose recovery, if you can boot tell me first which version you have and second what type of rom you want to have.
Click to expand...
Click to collapse
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
skylirizm said:
Hey there,
That's OK, I don't mind the wait, it's all good!
I can boot into Fastboot, but when I choose recovery/factory reset etc, it shows the HTC Logo and then goes into a bootloop.
As for the ROM, I want to get the original GB ROM for it because when I updated it to the latest ICS that's when the camera and touch started to get weird, whereas beforehand it was fine.
So thinking, if I go back down to GB Stock, that it should be all fine again, but I am not too sure on that one.
Thanks!
Click to expand...
Click to collapse
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
mhnx said:
Well, we have to downgrade the hboot version first. Did you do the wire trick procedure right? You can download a pg86img and flash it first to fix the bootloops. First lock the bootloader. When you finish this report here. I have to sleep it's late here and I work early. I'll send you tomorrow. See you.
Click to expand...
Click to collapse
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
skylirizm said:
Ok, the technician I took the phone to supposedly did the wire trick for S-OFF, but, it's still S-ON.
I have downloaded a lot of stock PG86IMG files before posting on here and none work, they scan when in bootloader and then nothing after that.
But that would be because I haven't locked the bootloader. So in saying this, I lock the bootloader following steps on many forum posts on here, then flash a .zip file that's correct and then it should all work?
I'll wait for your response, thanks!
Click to expand...
Click to collapse
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
mhnx said:
I do not think that the wire trick procedure was correct because you are still s on. Lock the bootloader and try to load the zip.
Click to expand...
Click to collapse
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
skylirizm said:
Hey, so I tried a P86IMG.zip from this thread here - http://forum.xda-developers.com/showthread.php?t=2274635
I couldn't find another one and with that I get an error "Main Version Fail" or "Main Version Check Fail".
I then tried RUU and RUU in zip format.
RUU comes back with wrong bootloader error. (I couldn't find an RUU that matched my radio version so I went with the nearest one)
RUU Zip comes back through fastboot with "remote 43 main version check fail"
Also I tried to do the Wire Trick and got stuck at the "ADB and Fastboot not found" even though the files are there and the phone is connected.
So still a little bit...stuck :\
Also relocked bootloader it just says relocked now.
If you need any other additional info I can send screenshots of what it's at.
Thanks!
Click to expand...
Click to collapse
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
mhnx said:
Did you try flashing the zip after the locking? You are doing the wire trick procedure on live linux cd?
Click to expand...
Click to collapse
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
skylirizm said:
Yes, tried flashing the zip after locking. Live CD is being used also. I will try again later. Thanks!
Click to expand...
Click to collapse
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
Oh that would be extremely helpful, I can use Linux, but prefer my Windows PC as it has all the files and it's just easier.
Thanks so much!
mhnx said:
If you want we can do the procedure together some time. Keep in mind that you have to unlock again. We can search for the windows version too.
Click to expand...
Click to collapse
donkeykong1 said:
I have windows version of wire trick procedure. If you need it, I'll gladly share it via PM
Click to expand...
Click to collapse
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
skylirizm said:
So update -
DK sent me the windows version of ControlBear via PM - thank you.
Have an unlocked bootloader.
I tried ControlBear, and because I can not boot into the OS, I start it at Fastboot USB, it reboots, then says "Connecting to Device", then "Testing ADB connection" then "Press Enter To Exit" and that's it, can't do anything else from there, and it gets stuck in the boot loop that it still has.
Tried again to google for methods for HBOOT 1.53, and am trying some of those methods, but it's not looking good at all.
I haven't even got to the stage where it asks me to do any sort of wire trick.
Also my battery in the EVO 3D has died so am using a battery out of a HTC MyTouch 4G with help from electrical tape :\
So now, any suggestions? I am trying to flash another RUU that's stock for my Radio (Well, it's close enough - RUUs are both 11.25.3504.06, mine is 11.25.3504.16)
EDIT: Tried all RUUs with relocked bootloader and comes back with bootloader error (ERROR 140). So, no idea.
Also it's scanning for PG86DIAG.img files on the SD Card - that's not normal is it.
Do you think we should give up on it, it's probably hard bricked and dead now
I think it's literally hard bricked and no way to bring it back from the dead.
As per my original post, all the details for the phone are there. And it sucks that I can't find a correct RUU for my phone (As it was Telstra AU - latest update of ICS)
AHH I don't know.
Click to expand...
Click to collapse
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
skylirizm said:
Hey there, thanks for the help again, unfortunately, still didn't work.
I unlocked the bootloader again. Then tried to flash what you said, it said "writing" then "successful". I pulled the battery and tried to boot into recovery and just loops
Click to expand...
Click to collapse
Try doing:
fastboot erase recovery
fastboot flash recovery "recovery".img
fastboot format system
fastboot format boot
And if it still doesn't let me send you a boot.img in some minutes to try flashing it.
EDIT: And something last, you can still do the controlbear trick while not in OS, its easy if you wanna try let me know.
skylirizm said:
Hey all,
I have this HTC EVO 3D that just, refuses to co-operate with me.
Story goes -
Got it on ICS and everything was working fine on it. I looked for updates available and it found a 28MB update that I installed and once the phone rebooted with the update, the camera fails to start and the touch screen just starts going crazy and opening everything, whereas before it fine.
So, I attempted to try and get it back to Gingerbread.
And googled and googled and googled.
Reason why I have opened a new thread is cause it's sort of everything going weird with it.
Of course, trying RUU files and trying to flash RUU in zip failed so on so forth.
I had unlocked the Bootloader and S-ON is on at this point. Also had CWM recovery installed and was able to boot into that.
With this in place, I read up on the wire trick and thought, yeah it seems a bit hard, I'll take it to a phone repair shop, where they had the phone for 2 weeks and told me that it was S-OFF and back to stock.
Since they had it and I got it back, it's now stuck in a boot loop and I can not get into any recovery etc (With the original SD Card in it). Can get to Bootloader and fastboot though.
Spent the last 3 hours with about 20 tabs in Chrome opened on how to exactly go from here and I am stuck.
Got a Linux Laptop here and tried to ControlBear and it comes up with ADB and Fastboot not found (Directory points to it being in tmp..no idea)
TL;DR
HTC Evo 3D (Australian Variant, was running ICS Telstra OEM)
Unlocked Bootloader
SHOOTER_U PVT SHIP S-ON RL
HBOOT-1.53.0007
eMMC-boot
Radio - 11.25.3504.16 M
Boot Loops, No Recovery, Fastboot commands work on windows.
So just wondering, where do I go from here. I don't know if the device is completely bricked now or if it can be saved.
(I tried a number of zip files on the SD Card (PG86IMG.zip) and nothing due to having S-ON.
Hoping someone can provide a procedure or point me in the right direction.
As reference, I used this thread mostly before it was taken to the Repair Shop and got stuffed.
Any help is appreciated.
Thanks so much.
Click to expand...
Click to collapse
i have same problem plz give me GB rom link and flash method
---------- Post added at 07:56 AM ---------- Previous post was at 07:42 AM ----------
mhnx said:
First of all you should be unlocked now with 1.53 hboot. Download from here the latest 4ext recovery (4EXT_Recovery_Touch_v1.0.0.6_RC3)
It's in my mega account don't worry about malicious software I downloaded it 5 minutes before doing this post. If you don't have unlocked your bootloader do it with the tokens HTC sent you in your email. Flash this recovery from fastboot (fastboot flash recovery "recoveryname".img). After that remove the battery and re-enter fastboot mode (Vol down+power button) and choose recovery. If you manage to boot into recovery from there tell me to send you a link for a rom to flash. I don't believe its a hard brick.
Click to expand...
Click to collapse
plz help my htc evo 3d is bootloop no go to any recovery mode i flash all recovery
BOOTLOADER-UNLOCK
HBOOT-1.53.0007
RADIO-11.25.3504.06.M
i flash many ruu.exe but this
RUU_SHOOTER_U_ICS_35_S_hTC_Asia_WWE_3.28.707.1_Radio_11.77.3504.00U_11.25.3
flash seccussfully without any error but no booting only htc logo plz help