After installation of ROM when I m trying to reboot phone its not rebboted just vibrated again n again n displaying nothing if I remove the battery than connect to again than only its responding so what can I do?
What model of your phone? Are you sure you installed a ROM designed for your phone?
lenovo s 920 row
Related
Hi guys
I tried to install a custom ROM on my huawei ascend g610-u20 android 4.2.2 with mobileuncle tool
my phone was rooted but I forgot to unlock bootloader, anyway after rebooting phone with mobile uncle tool(and selecting recovery.img (CWM method)) it's gone in to a crazy state!!
I searched internet and I figured out that it's huawei boot loop :|, I downloaded the official ROM from huawei website and tried To flash it,
I get error 2004 ( I've installed Meditak Vcom and my device usb driver)
when I turn on my phone with battery it reboots every 5 second , so windows and sp flash tools can't recognize it.
I tried to flash it without battery,when I pressed volume down phone turned on by vibration and after a while it turned of by vibration again!
I can't access to bootloader menu when I press " volume up +volume down + power button" nothing happens! it just turns on phone!( and crazy loop boot circle happens again!)
I'm using windows 8.1 last update , every thing is Ok and my cable is Ok my sd card is Ok and I've downloaded Right ROM for my device(MT6589) and also I'm using sp flash tool last version!
**** I've got access to fast boot mode ****
My main problem is with Error 2004! help me out PLZ!
I couldn't put any screen shot cuz I'm a new user, Sry!
any idea?
I have an HTC Desire 620G Dual Sim.
Hello , today i got a notification to install a software update , and so i thought 'why not' and proceeded. When it finished , it booted , then went to a screen saying something like ' no command found' , and i got into a menu with multiple choices such as boot , backup/restore from sd card , install update from sd card , cache , adb etc , so i chose boot , but when it booted again , it got me back into the screen saying ' no command found ' or something similar , then i chose 'backup to sd card' because i thought , for some reason , that once it was done it'd boot properly . On the next screen there's a droid with a blue thing rolling in it's stomach , a blue bar that is now full and it says ' installing system update' . It has been going on like this for 20 minutes now . When i press the power button the blue thing stops rolling and it says :
'SD card free space : 14831MB
User data allocated:4182MB
backup file : userdata_20151008_180633.backup'
I'm rooted , i have no custom recovery , no mod or kernel or anything , i haven't been messing with those things at all , i just got root to get past a license verification.
What can i do to boot properly , back to my homescreen? By now i know that my warranty is voided if i bring my device to a service.
UPDATE : It's now finished the backup and went back to the multi potion screen. Would a factory reset do the trick?
I think you're stuck in the recovery/bootloader. Try to do a factory reset. If that doesn't help, you must flash stock firmware. Be aware for the next time you update. If you have root you can stuck in bootloop or stuck in the recovery/bootloader. Make a nandroid backup before you update with OTA.
PS: For flashing stock firmware, you should search for a guide in google or xda.
Hit the Thanks Button if I helped
I let the device discharge overnight , and now , when i plug in the charger , it boots up but now it doesn't even let me access the recovery , it's stuck at the white htc logo screen . Any help , please?
Update : It's now been booted , and brought back to the recovery screen . I did a factory-reset but it just brought me back to the 'No command' screen. How do you flash custom firmware if you don't have a custom recovery installed?
You don't have to flash COSTUM firmware. You can flash STOCK firmware. Search for a guide in google or xda: HTC (FULL PHONE MODEL NAME) How to flash stock firmware
Don't ask me how to flash with fastboot because i don't know that (I'm a Samsung User).
Hit the Thanks Button if I helped
Recently I installed CM 12.1 in Xperia M C1904, after installation, the device doesn't recognize SIM Card, also on dialing *#06# no IMEI Code appears, and the device shuts down automatically while in standby. The device doesn't shut down when its connected to PC or power source. Only way to restart the phone then is to remove the battery and putting back the battery, and the device just stays switched on for like 10-20 mins and same thing happens. What to do?
shiladitya_saha said:
Recently I installed CM 12.1 in Xperia M C1904, after installation, the device doesn't recognize SIM Card, also on dialing *#06# no IMEI Code appears, and the device shuts down automatically while in standby. The device doesn't shut down when its connected to PC or power source. Only way to restart the phone then is to remove the battery and putting back the battery, and the device just stays switched on for like 10-20 mins and same thing happens. What to do?
Click to expand...
Click to collapse
Are you using an incompatible version of CM? Did you do a clean install or dirty flashed on another ROM? Custom kernel? GAPPS version?
Did you try restoring from backup (don't tell me you didn't backup!)
Try restoring from backup and doing a clean install.
Post a link of the guide you used.
sw1tchback said:
Are you using an incompatible version of CM? Did you do a clean install or dirty flashed on another ROM? Custom kernel? GAPPS version?
Did you try restoring from backup (don't tell me you didn't backup!)
Try restoring from backup and doing a clean install.
Post a link of the guide you used.
Click to expand...
Click to collapse
I installed cm-12.1-20160112-NIGHTLY-nicki from official cyanogenmod device site (can't paste the link due to restriction)
First, I tried to unlock the bootloader of Xperia M (when Xperia M had the stock ROM). After unlocking the bootloader, the phone went into bootloop (soft brick) so I downloaded a firmware for Xperia M C1904 (C1904_15.1.C.17_Generic IN) and flashed it using flashtool. Now Xperia M had Android 4.1. Then I installed TWRP recovery with TWRP Android app and flashed the given zip ( cm-12.1-20160112-NIGHTLY-nicki) with Gapps (open_gapps-arm-5.1-pico-20151225) and installed the CM 12.1 successfully, only issue was that the device didn't detect SIM card (I tried the SIM in other device and worked fine) and blank IMEI number displayed when *#06# is dialled. Then another issue arised, inspite of full charge, when the device is in idle state, it switches off automatically, I can't turn on the phone anyway, but, only by removing the battery and place the battery again leads to the booting up of phone and again after 20-30 minutes it switches off and this goes on. But when the device is connected to power source, this shutting down doesn't happen. I tried to revert back to stock ROM but the flashtool doesn't recognise the device. And no, I couldn't take a backup of the stock rom (I thought of taking backup after installing the recovery) I badly need help! No Custom Kernel was installed, just Gapps and ROM
shiladitya_saha said:
I installed cm-12.1-20160112-NIGHTLY-nicki from official cyanogenmod device site (can't paste the link due to restriction)
First, I tried to unlock the bootloader of Xperia M (when Xperia M had the stock ROM). After unlocking the bootloader, the phone went into bootloop (soft brick) so I downloaded a firmware for Xperia M C1904 (C1904_15.1.C.17_Generic IN) and flashed it using flashtool. Now Xperia M had Android 4.1. Then I installed TWRP recovery with TWRP Android app and flashed the given zip ( cm-12.1-20160112-NIGHTLY-nicki) with Gapps (open_gapps-arm-5.1-pico-20151225) and installed the CM 12.1 successfully, only issue was that the device didn't detect SIM card (I tried the SIM in other device and worked fine) and blank IMEI number displayed when *#06# is dialled. Then another issue arised, inspite of full charge, when the device is in idle state, it switches off automatically, I can't turn on the phone anyway, but, only by removing the battery and place the battery again leads to the booting up of phone and again after 20-30 minutes it switches off and this goes on. But when the device is connected to power source, this shutting down doesn't happen. I tried to revert back to stock ROM but the flashtool doesn't recognise the device. And no, I couldn't take a backup of the stock rom (I thought of taking backup after installing the recovery) I badly need help! No Custom Kernel was installed, just Gapps and ROM
Click to expand...
Click to collapse
I'm no expert here, but I'd recommend Wiping Data and doing a clean flash of the latest nightly (20160113) and flash GAPPS with it before rebooting. Also check if you have the latest version of TWRP. For your device I would recommend using CWM or Cyanogen Recovery but TWRP should work fine. Tell me how it goes :fingers-crossed:
My phone is micromax canvas spark q380.I rooted my device then installed custom ROM ios9. After successful installation through twrp , I booted up my device got a message "Encryption was un successful" " decrypt partion " for that I had to fill a password which I don't know. I tried some but failed, then I installed sptool and drivers of my phone on my PC and downloaded stock ROM of my device and then connected my device to PC and formated and installed stock rom.After successful installation, I was trying to switch on my device but it's not even showing any response not getting on. Please help....
Bro I am facing same problem when I am installed amigo OS even my device not booting not showing any logo or not able to recovery mode only red LED indication blinking then I went service center I show him mobile they told me mobile is dead wait for 1 hour they update the software free and don't tell home phone is rooted
hello,
I have a nubia z11 mini s(bootloader unlocked, and TWRP installed) so yesterday I flashed a rom which I downloaded from getdroidtips.com/resurrection-remix-nubia-z11-mini-s/
, I've flashed lineage os 14.1(android 7) and mokee OS 9.0(android) successfully and they worked fine, then I thought about flashing resurrection remix (android 7.1.2) on my Nubia z11 mini s. When I flashed it using TWRP it showed an error: ERROR 7.
So I searched about that error and I got to know that you have to modify a script which is present in -> RR-N-v5.8.2-20170309-nx529j\META-INF\com\google\android
and you have to remove the assert part which checks the model of your phone and if it is correct then it starts to flash and if it's not correct then it aborts. The reason why I did this is that when I tried installing mokee os 9 I got the same error and fixed it by removing the assert section in the updater-script. Then I zipped everything together then proceeded with the next step
now it was time to flash but my phone's battery was 8% so I plugged in the charging cable and continued the flashing process while charging my phone(was this wrong ?), so, then I booted to TWRP and wiped system,data,Dalvik/ART, cache and then installed the zip after that when I hit reboot phone turned off but it didn't restart, so I removed the cable and plugged it back in AND I DIDN'T SAW THE CHARGING LOGO, ONLY THE RED LED WAS BLINKING. PLS HELP ME I DO HAVE A CUSTOM RECOVERY INSTALLED AND BOOTLOADER UNLOCKED.
THANKS IN ADVANCE
XENODROME said:
hello,
I have a nubia z11 mini s(bootloader unlocked, and TWRP installed) so yesterday I flashed a rom which I downloaded from getdroidtips.com/resurrection-remix-nubia-z11-mini-s/
, I've flashed lineage os 14.1(android 7) and mokee OS 9.0(android) successfully and they worked fine, then I thought about flashing resurrection remix (android 7.1.2) on my Nubia z11 mini s. When I flashed it using TWRP it showed an error: ERROR 7.
So I searched about that error and I got to know that you have to modify a script which is present in -> RR-N-v5.8.2-20170309-nx529j\META-INF\com\google\android
and you have to remove the assert part which checks the model of your phone and if it is correct then it starts to flash and if it's not correct then it aborts. The reason why I did this is that when I tried installing mokee os 9 I got the same error and fixed it by removing the assert section in the updater-script. Then I zipped everything together then proceeded with the next step
now it was time to flash but my phone's battery was 8% so I plugged in the charging cable and continued the flashing process while charging my phone(was this wrong ?), so, then I booted to TWRP and wiped system,data,Dalvik/ART, cache and then installed the zip after that when I hit reboot phone turned off but it didn't restart, so I removed the cable and plugged it back in AND I DIDN'T SAW THE CHARGING LOGO, ONLY THE RED LED WAS BLINKING. PLS HELP ME I DO HAVE A CUSTOM RECOVERY INSTALLED AND BOOTLOADER UNLOCKED.
THANKS IN ADVANCE
Click to expand...
Click to collapse
I'm to have the same problem, All of a sudden my mobile was not power on.
I usually switch off the phone during sleep time, when i power it on during morning time no response from mobile... even i plugged into the power. no response after 4 hours, when i plugged into my system to see i fee the red light blinking.. and my USB was detecting as QUSB_BULK. I tried with QFIL flash.. it says download succeeds, but mobile is in the same condition..
Did you fixed your phone.. ? Could you share steps..
Thank you
Hello,
I expirienced the same issue. After upgrading my Nubia Z11 mini S to Lineage acc. [ROM][UNOFFICIAL][8.1.0][nx549j] LineageOS 15.1 for Nubia z11 mini s [21/10/2018] it ran for arround 3 weeks. One morning I heard a little sound like battery low and I could not reboot it. In the first moment only all 3 LED's where on. Trying to access TWRP by PWR/VOL- severeal times ended up with a flashing home button LED when it is connected to USB.
I tried also the Nubia emergency tool V1.1.6. Some times I could manage to have a successful recover by means of pressing PWR/Vol- button. Nevertheless the phone does not boot.
Was there a solution for this issue or can I consider it now as bricked?