Hi guys
I tried to install a custom ROM on my huawei ascend g610-u20 android 4.2.2 with mobileuncle tool
my phone was rooted but I forgot to unlock bootloader, anyway after rebooting phone with mobile uncle tool(and selecting recovery.img (CWM method)) it's gone in to a crazy state!!
I searched internet and I figured out that it's huawei boot loop :|, I downloaded the official ROM from huawei website and tried To flash it,
I get error 2004 ( I've installed Meditak Vcom and my device usb driver)
when I turn on my phone with battery it reboots every 5 second , so windows and sp flash tools can't recognize it.
I tried to flash it without battery,when I pressed volume down phone turned on by vibration and after a while it turned of by vibration again!
I can't access to bootloader menu when I press " volume up +volume down + power button" nothing happens! it just turns on phone!( and crazy loop boot circle happens again!)
I'm using windows 8.1 last update , every thing is Ok and my cable is Ok my sd card is Ok and I've downloaded Right ROM for my device(MT6589) and also I'm using sp flash tool last version!
**** I've got access to fast boot mode ****
My main problem is with Error 2004! help me out PLZ!
I couldn't put any screen shot cuz I'm a new user, Sry!
any idea?
Related
Hi,
I'm pretty new to Android. I recently rooted my phone (Huawei Ascent Y511 U30) using Framaroot and it worked perfectly after reboot. Then I tried to install Sinhalese fonts using Sinhala Fonts Installer and after installing that, I uninstalled the app before restarting. Then I restarted the phone and it get stuck at the Huawei Logo and will not boot into launcher.
I tried to hard reset by going to recovery mode using Power + (vol up + vol down). (Fortunately I can go into the recovery mode.) Even if I factory reset the phone, the same situation is there. And some articles said to log in to fast boot mode by Power + Vol down, but it doesn't work and just boots into that Huawei logo.
As I read, to install a custom ROM, ClockWork Recovery has to be used, but I can't do it since I can't log into my phone.
Please help me on this. What has gone wrong? Is there any way I can make my phone alive? Or at least, is there any way that I can install ClockWork Recovery without booting into my phone, just using my SD card?
Thank you in advance..!!
gnomezgrave said:
Hi,
I'm pretty new to Android. I recently rooted my phone (Huawei Ascent Y511 U30) using Framaroot and it worked perfectly after reboot. Then I tried to install Sinhalese fonts using Sinhala Fonts Installer and after installing that, I uninstalled the app before restarting. Then I restarted the phone and it get stuck at the Huawei Logo and will not boot into launcher.
I tried to hard reset by going to recovery mode using Power + (vol up + vol down). (Fortunately I can go into the recovery mode.) Even if I factory reset the phone, the same situation is there. And some articles said to log in to fast boot mode by Power + Vol down, but it doesn't work and just boots into that Huawei logo.
As I read, to install a custom ROM, ClockWork Recovery has to be used, but I can't do it since I can't log into my phone.
Please help me on this. What has gone wrong? Is there any way I can make my phone alive? Or at least, is there any way that I can install ClockWork Recovery without booting into my phone, just using my SD card?
Thank you in advance..!!
Click to expand...
Click to collapse
My understanding is that being on that screen @ the logo IS fastboot mode. See if the PC Suite can get you back up and running: http://www.downloads.techdiscussion.in/smartphones/huawei-ascend-y511-pc-suite-and-usb-driver/
The reason a factory reset doesn't help in this situation is that you made a change to /system which isn't much affected when you wipe factory data which is /data partition.
Huawei Y511-U30 stuck at boot logo
I am facing a problem with huawei y511-u30, i have rooted my fone nearly 3 weeks ago with framaroot, every thing was working fine after reboot , i have installed many app, upto 3 weeks the fone was working absolutely fine and now suddenly it stuck at boot logo. my fone automatically turned off in night and turn On again in d morning with "scheduled power ON/Off" options in d setting. today when a wakeup i saw only boot logo.
i removed d battery and tried to restart but i could not, i can't go into recovery, when i press volume (-) and power button or vol (+) and power it stucks on same boot logo,
when i charge the mobile in power OFF mode it doesnot show battery indicator it again starts and stuck on boot logo "Huawei ASCEND"
it has default recovery 3e
any one plz help
problem is solved by updating firmware available on internet
well,,I'm not a developer so I'm not sure if what I'm about to say is going to work, but I have a full backup of my ascend y511-u30 I wonder if you can use my system.img backup and flash it with sp flashtool to recover your phone..
If you get this confirmed by any developer or wanna give it a try yourself you just tell me and I'll send you the files right away
Ahmed Hesham said:
well,,I'm not a developer so I'm not sure if what I'm about to say is going to work, but I have a full backup of my ascend y511-u30 I wonder if you can use my system.img backup and flash it with sp flashtool to recover your phone..
If you get this confirmed by any developer or wanna give it a try yourself you just tell me and I'll send you the files right away
Click to expand...
Click to collapse
You mean by STOCK ROM backup or just phone data?
---------- Post added at 10:58 PM ---------- Previous post was at 10:54 PM ----------
trm33 said:
I am facing a problem with huawei y511-u30, i have rooted my fone nearly 3 weeks ago with framaroot, every thing was working fine after reboot , i have installed many app, upto 3 weeks the fone was working absolutely fine and now suddenly it stuck at boot logo. my fone automatically turned off in night and turn On again in d morning with "scheduled power ON/Off" options in d setting. today when a wakeup i saw only boot logo.
i removed d battery and tried to restart but i could not, i can't go into recovery, when i press volume (-) and power button or vol (+) and power it stucks on same boot logo,
when i cahrge the mobile in power OFF mode it doesnot show battery indicator it again starts and stuck on boot logo "Huawei ASCEND"
it has default recovery 3e
any one plz help
problem is solved by updating firmware available on internet
Click to expand...
Click to collapse
Do you mind explainig about firmware and rom?? I don't get it. Firmware=android version updare or full stock rom? Like I'm using 4.2.2!!.. I don't know much and sorry about my english.
Would like to try the application please send it, you can mail me on [email protected]
Guys it happened to me tooo...and i fixed it...all u have to do is download sp flashtool(google for it)...and google for a stock rom for huawei y511...(sorry i can't upload the files because i'm on a data block)...download sp flashtool and install it and open it...choose the scatter file inside the rom and some files will load to the app select only the recovery file and click the download button...connect your phone to the pc pressing the vol down button..it will flash the recovery to your phone...then boot into cwm recovery of your phone and flash a custom rom...(obviously u have to download one...after that u can change back to stock if you like)...
help plzzz
Help plzzz!
My Huawei Y511 U10 is not booting Can You Help Me To Fix It And if You Have a Rom OF Your Huawei Y511 U10 Plsss Upload It And Give Me The Link
I have a Symphony W85 MTK-6572...
I recently installed a Custom ROM after which my Phone turns off instantly on the Boot Screen... I can still enter the recovery mode and have tried a lot of ROMs which previously worked on my phone... But now the phone turns off instantly after the boot screen appears...
Finally, I downloaded the correct Stock ROM and tried to flash using SP Flash Tool...
I removed the battery, SD card, sim card, then connected the phone by holding on the vol (+) button, the phone connects and disconnects instantly from the USB port... The MT-65xx Preloader appears and then disappears instantly in the Device Manager... So I cannot install the Stock ROM also...
Please, I am in desperate need help regarding this issue...
so i have a blu dash music 4.0 and one day i got a encryption unsuccessful error and i clicked reset but it did not boot into recovery mode it booted in to android with a ton of errors in fact i was unable to get to the home-screen so i rebooted to recovery mode and did a hard reset but when i rebooted the same thing happened i tried it five more time and then it wont let me into recovery mode and is in a boot loop it shows the BLU logo for 5-15 seconds then reboots to the same thing i know i have dev options enabled but i don't know if i have usb debuging enabled or if my bootloder is unlocked i cant get it to connect to the computer with the battery but if i take the battery out and plug it in to my computer and press the vol buttons it will connect to the computer for like 5 seconds i have tried re flashing using this tut: "how to use smart phone flash tool to flash any blu smartphone" but it failed
please help thanks
Hello all,
First of all, as a disclaimer: I am a total noob in this area. I just got my Ulefone T1, and tried to root it by installing TWRP and then installing SuperSU using TWRP. When I first installed TWRP, it worked and I got into the TWRP recovery menu. However, as the phone had to be wiped, I couldn't install the SuperSU zip anymore. I did a normal reboot to transfer the SuperSU zip to my phone, but when I then tried to turn my phone off and access TWRP, it went to normal recovery mode of my phone. As I wanted to start fresh off again, I went to the settings of my phone and did a factory reset silly.
Now, it is stuck in a bootloop where I can literally do nothing. I cannot access factory mode or recovery mode, all it does is just endlessly boot and turn off. I have managed to turn it off completely, but that's all I can do. Also, the battery is not removable.
Does anyone with a little more knowledge have a suggestion for me? Thanks in advance!
As an update, I got a suggestion to fully drain the battery, but that does not work either. I have tried connecting it to my PC, which is not working, but that was acting weird before. I guess it's just not possible?
did you work this out ? i am stuck in bootloop too ??????
Daviesjosh95 said:
did you work this out ? i am stuck in bootloop too ??????
Click to expand...
Click to collapse
I have no idea what software is necessary to do it for your device but you can flash stock rom, if it uses sp tool or something then download stock rom, use sp tool to flash it. Should be OK after that. As I am not familiar with this device I can't give you any other advice other than flashing stock rom.
Any solutions to unbricking/boot looping?
Have anyone found any solutions to unbricking phone??
Mine also did bootlooping after unlocking bootloader.
I was able to flash successfully but screen fussy and unreadable and not able to touch. I am able to hear but lines are on screen.
I have same problem, please, anyone help, I think I used wrong twrp image
Ulefone T1 Bootloop solution 2019.
I was able to fix the bootloop of my ulefone t1, just flash it with sp flash tool by following this guide:
1. Download the Stock Firmware on your personal computer.
2. Install the USB MTK Drivers (skip if you have it already installed).
3. Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
4. Click the Scatter-loading button to navigate to the stock Rom you just downloaded.
5. Select the Scatter File from the extracted Stock Firmware on your computer.
6. Select the Download Only in the SP flash tool option
7. Click the Download button to start the Formating process.
8. Connect your device via USB to the computer>> holding volume + and volume – button of your device at the same time or holding power button only so that the flashing process will starting working
9. Patiently wait for your device to be formatted.
10. After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
11. Unplug your device and boot it up.
12. If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
13. Voila, you are all good.
Very important step 8 of the guide.
Well few years ago I tried to instal twrp recovery in my micromax E313 but I don't what wrong I did it just didn't instal and delete the stock recovery aswell , however the phone kept working untill today I turned the phone on decided to factory reset , pressed power button and volume down , went to some mode where was many options but I couldn't find wipe data or factory reset , but instead I found "Clear emcc or emmc" I clicked it , the phone restarted but it never loaded to the os (home screen) it was stuck on micromax logo now note here I never turned usb debugging on before back to now , so I tried many things android mukti tool but it keept giving me error in fastboot the phone requested to to turn bootloader on press yes or no I tried pressing on which in case was volume up button , but it never worked "failed" then I tried sp tool and just downloaded firmware , selected scatter file but it just doesn't give me that green tick and now whenever I try to go in fastboot mode , my phone just switch off , so no recovery , no flashboot , no os , no usb debugging , I wanted to know if there's anyway to recover it somehow , it would be very helpful
By the way am new here so if I have posted this new thread in wrong section I request mods to move it to right please.
Thankyou in advance
Edit: the fastboot mode is working found out my battery was low , after charging it works like normal , but still no usb debugging no recovery no os.