Hello all,
First of all, as a disclaimer: I am a total noob in this area. I just got my Ulefone T1, and tried to root it by installing TWRP and then installing SuperSU using TWRP. When I first installed TWRP, it worked and I got into the TWRP recovery menu. However, as the phone had to be wiped, I couldn't install the SuperSU zip anymore. I did a normal reboot to transfer the SuperSU zip to my phone, but when I then tried to turn my phone off and access TWRP, it went to normal recovery mode of my phone. As I wanted to start fresh off again, I went to the settings of my phone and did a factory reset silly.
Now, it is stuck in a bootloop where I can literally do nothing. I cannot access factory mode or recovery mode, all it does is just endlessly boot and turn off. I have managed to turn it off completely, but that's all I can do. Also, the battery is not removable.
Does anyone with a little more knowledge have a suggestion for me? Thanks in advance!
As an update, I got a suggestion to fully drain the battery, but that does not work either. I have tried connecting it to my PC, which is not working, but that was acting weird before. I guess it's just not possible?
did you work this out ? i am stuck in bootloop too ??????
Daviesjosh95 said:
did you work this out ? i am stuck in bootloop too ??????
Click to expand...
Click to collapse
I have no idea what software is necessary to do it for your device but you can flash stock rom, if it uses sp tool or something then download stock rom, use sp tool to flash it. Should be OK after that. As I am not familiar with this device I can't give you any other advice other than flashing stock rom.
Any solutions to unbricking/boot looping?
Have anyone found any solutions to unbricking phone??
Mine also did bootlooping after unlocking bootloader.
I was able to flash successfully but screen fussy and unreadable and not able to touch. I am able to hear but lines are on screen.
I have same problem, please, anyone help, I think I used wrong twrp image
Ulefone T1 Bootloop solution 2019.
I was able to fix the bootloop of my ulefone t1, just flash it with sp flash tool by following this guide:
1. Download the Stock Firmware on your personal computer.
2. Install the USB MTK Drivers (skip if you have it already installed).
3. Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
4. Click the Scatter-loading button to navigate to the stock Rom you just downloaded.
5. Select the Scatter File from the extracted Stock Firmware on your computer.
6. Select the Download Only in the SP flash tool option
7. Click the Download button to start the Formating process.
8. Connect your device via USB to the computer>> holding volume + and volume – button of your device at the same time or holding power button only so that the flashing process will starting working
9. Patiently wait for your device to be formatted.
10. After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
11. Unplug your device and boot it up.
12. If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
13. Voila, you are all good.
Very important step 8 of the guide.
Related
********* solution in POST 2 *********
Ok, i have double trouble situation here. As the title says i'm in a:
- TWRP bootloop (flashing TWRP logo, interval is about 1 min) AND
- custom ROM bootloop (it's not on the Samsung logo, it's pass that point, it displays boot animation [choppy], vibrates and then repeats vibrating, here it enters a loop)
How did i get to bootloop both? Well, i had TWRP 3.0.2.0 and custom ROM installed in my phone.
It was booting into system and into recovery without any problem and was able to use my phone UNTIL i decided to experiment and flash custom kernel via TWRP. It flashed ok BUT THEN i got stuck into this double bootloop situation. Custom rom/custom kernel interference probably.
Only thing i can access now it's the download mode. So i tried to use ODIN and flash latest TWRP(3021) over existing one (3020) - DIDN"T WORK!
Here i found that i can flash CWM over TWRP recovery and use it to factory reset, format partitions and flash another ROM to revive my device. Is this safe?
I think that since it's bootlooping because of a custom kernel, flashing stock will resolve this issue. But how to do that?
Never been in this situation before and i don't know any of the possible solutions to fix it.
I don't mind about the data, just to revive it!
Is there a hope? Can you help me? Please?
!
********* SOLUTION *********
This method works for me, it doesn't mean it'll work for you. SO PROCEED AT YOUR OWN RISK. I'm not responsible for any kind of damage you cause to your device by following this tutorial! Read carefully!
---------------------------------------------------------------------------------------------------------------------
First of all, make sure your battery is charged over 50%. If not, charge it.
Check you USB cable, make sure it's in good condition.
If you're using laptop, plug it in.
---------------------------------------------------------------------------------------------------------------------
Download all the zips attached, or the one you need.
- Install samsung drivers extracted from archive 1,
- Reboot your PC/LAPTOP,
- Extract CWM_6.0.4.7_Non-Touch_GT-I9300.tar image from archive 2,
- Extract odin from archive 3 and run it as administrator,
- Boot your samsung device into DOWNLOAD mode, MENU+VOL_DOWN+POWER, then press VOL_DOWN again,
- Connect it with PC/LAPTOP using usb cable,
- odin should recognize it and turn green under ID:COM section,
- In odin, under AP browse for extracted CWM_6.0.4.7_Non-Touch_GT-I9300.tar image and select it,
- Click START,
- Wait for the phone to reboot,
Now, if your samsung can boot into system, leave it boot.
If you also have a system bootloop like i did, then interrupt it once samsung logo shows up by taking out the battery, leave it out for ten seconds then pop it back in and boot into recovery by pressing MENU+VOL_UP+POWER.
- Done!
---------------------------------------------------------------------------------------------------------------------
Firstly wipe cache/dalvik cache, format /system, /data, then you can download and flash any custom ROM!
---------------------------------------------------------------------------------------------------------------------
.
You don't have to thank me!
.
Hello! I rooted my Coolpad E560, a.k.a. Coolpad or Sky Mini and everything was fine until I decided to unroot it. It immediately restarted and will not boot ever since (stuck at logo). I opened recovery mode and selected wipe data/factory reset but it didn't solve the problem, neither did wipe cache. Then I selected reboot to bootloader. "Download and Install the package? Press volume up to agree or volume down to cancel". I press volume up and then it's stuck on "Information Do not disconnect the data cable". In the end I tried to flash stock rom. The only firmware I found was (phone name).CPB and it seems like the only flashing tool that can use .CPB is YGDP. But the flashing process doesn't even begin, it gets stuck on Entering download mode... I unsuccessfully tried to enter download mode on my phone. It doesn't have removable battery, some key combinations I tried didn't work. Now I don't know what to do. Any help will be appreciated.
bump
bump
How did u solve it ?
Did u solve it ? do you have any backup files that u can send me ?
denico_bg said:
Hello! I rooted my Coolpad E560, a.k.a. Coolpad or Sky Mini and everything was fine until I decided to unroot it. It immediately restarted and will not boot ever since (stuck at logo). I opened recovery mode and selected wipe data/factory reset but it didn't solve the problem, neither did wipe cache. Then I selected reboot to bootloader. "Download and Install the package? Press volume up to agree or volume down to cancel". I press volume up and then it's stuck on "Information Do not disconnect the data cable". In the end I tried to flash stock rom. The only firmware I found was (phone name).CPB and it seems like the only flashing tool that can use .CPB is YGDP. But the flashing process doesn't even begin, it gets stuck on Entering download mode... I unsuccessfully tried to enter download mode on my phone. It doesn't have removable battery, some key combinations I tried didn't work. Now I don't know what to do. Any help will be appreciated.
Click to expand...
Click to collapse
Originally posted by: Azpre
Hello
A while ago, I tried to root my Essential Phone using magisk. I unlocked the bootloader, flashed twrp, but when I tried to install the magisk zip file, it failed, and I was stuck in a bootloop.
Easy problem to solve right? I wiped everything from my phone (including the ROM), downloaded a stock ROM (.ZIP file, and I think that’s what ****ed everything up) and when I tried to install it, it failed once again. Therefore, I downloaded another stock ROM file (this time as a .img file) and tried to installed it.
But what I ended up doing, was installing some other .img file as the boot image (on twrp), and after that, my phone kept restarting endlessly. I couldn’t access the recovery mode (if I tried to press the vol down + start buttons, or just the start button, the process would repeat, so I leaved my phone there until it run out of battery, now its off).
I was despaired and tried to search every inch of the internet for a solution, and obviously, I could not find it.
Any help would be greatly appreciated
Thanks for your attention.
(Im not sure if this is really a soft brick, I named this thread wit my basic knowlage, sorry if Im wrong)
Hi , what is full Model of phone ? and did you tried with fastboot flashing ?
https://www.youtube.com/watch?v=RrMLqSXcxjI
Teddy Lo said:
Hi , what is full Model of phone ? and did you tried with fastboot flashing ?
Click to expand...
Click to collapse
going to give it a shot after I buy another type - C cable, because mine just broke ;-;
but I think that's not going to work, because I can't access the recovery mode menu
when I press the power + vol down keys the Essential's logo appears and get stuck in a bootloop
Thanks anyways
Problem:
1.I had Resurrection Remix rom 7.1.2 installed with TWRP.
2. Tried to Install stock rom and stock recovery. Was able to install stock recovery but it was hanging in recovery. Could not move with volume buttons.
3. Then I tried flashing fastboot roms through miflashtool. Flashing was done successfully but nothing happens. It is now stuck on MI logo.
4. Mi logo only(No powered by android below or anything) It just restarts.
5. Cant go to recovery by any means tried everything.
6. Can only go to fastboot.
7. Adb does not detect device tried to install multiple times.
8. Cannot switch on Usb debuging since tablet wont boot even once.
9. I have no means to flash recovery as well.
Please help.
Have you found any solution
I am looking for a solution facing similar problem
I am looking for a solution facing a similar problem. Any help will be appreciated. I am able to reach fastboot and sun boot as well as recovery command successfully with twrp iso. but twrp is not loading after reboot and also trying to press vol up and power buttons.
chandidas said:
Have you found any solution
Click to expand...
Click to collapse
Hello community,
I haven't posted here before, so I hope I'm not doing anything wrong.
I have a problem with my Neffos X1 and after browsing the internet for hours nothing helped so far, so I hope some of you can help me out.
My phone is stuck in a bootloop since yesterday evening. I haven't done any updates or new installations recently, so it just happened out of the blue. It loads till the Neffos logo and then restarts over and over again.
Since I can't take the battery out, I tried letting it run out of energy and then restart, but as soon as I connect it to a power source the bootloop will start again.
I read a lot about getting it in recovery mode or to try and flash it, but no matter what combination of buttons I try, nothing is happening. The phone basically doesn't react to anything and just keeps restarting. The only thing I noticed is, that when pushing both volume keys the screen will just stay black (no restarting), but after letting go the bootloop will start again.
I tried flashing it via SP Flash Tools, but the phone also doesn't react to it.
Lots of troubleshooting guides also require, that I have rooted my phone in the past, unfortunatly I haven't. I also read about unlocking the bootloader, but since my phone isn't reacting to any buttons and my laptop also doesn't seem to recognize my phone (probably because it doesn't boot proberly), that doesn't seem like a solution either.
To summarize: I'm stuck in a bootloop with no recovery mode, no rooting, no unlocking bootloader, probably can only use my laptop to do anything remotely.
So, is there anything you can think of, that might help me get out of the bootloop? Or ideas of what I may did wrong when trying the other solutions?
Thanks for any help in advance.
Same problem
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Shotzo said:
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Click to expand...
Click to collapse
Try this
Download phone's Stock Firmware onto your personal computer.
Install the USB MTK Drivers - NOT ANY OTHERS (skip if you have them already installed).
Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
Click the Scatter-loading button to navigate to the Stock Rom you just downloaded.
Select the Scatter File from the extracted Stock Firmware on your computer.
Select the Download Only in the SP flash tool option
Click the Download button to start the Formating process.
Connect your phone via USB to the computer>> holding volume + and volume – button of your phone at the same time or holding power button only so that the flashing process will starting working
Patiently wait for your device to be formatted.
After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
Unplug phone and boot it up.
If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
Voila, you are all good.