Hello! I rooted my Coolpad E560, a.k.a. Coolpad or Sky Mini and everything was fine until I decided to unroot it. It immediately restarted and will not boot ever since (stuck at logo). I opened recovery mode and selected wipe data/factory reset but it didn't solve the problem, neither did wipe cache. Then I selected reboot to bootloader. "Download and Install the package? Press volume up to agree or volume down to cancel". I press volume up and then it's stuck on "Information Do not disconnect the data cable". In the end I tried to flash stock rom. The only firmware I found was (phone name).CPB and it seems like the only flashing tool that can use .CPB is YGDP. But the flashing process doesn't even begin, it gets stuck on Entering download mode... I unsuccessfully tried to enter download mode on my phone. It doesn't have removable battery, some key combinations I tried didn't work. Now I don't know what to do. Any help will be appreciated.
bump
bump
How did u solve it ?
Did u solve it ? do you have any backup files that u can send me ?
denico_bg said:
Hello! I rooted my Coolpad E560, a.k.a. Coolpad or Sky Mini and everything was fine until I decided to unroot it. It immediately restarted and will not boot ever since (stuck at logo). I opened recovery mode and selected wipe data/factory reset but it didn't solve the problem, neither did wipe cache. Then I selected reboot to bootloader. "Download and Install the package? Press volume up to agree or volume down to cancel". I press volume up and then it's stuck on "Information Do not disconnect the data cable". In the end I tried to flash stock rom. The only firmware I found was (phone name).CPB and it seems like the only flashing tool that can use .CPB is YGDP. But the flashing process doesn't even begin, it gets stuck on Entering download mode... I unsuccessfully tried to enter download mode on my phone. It doesn't have removable battery, some key combinations I tried didn't work. Now I don't know what to do. Any help will be appreciated.
Click to expand...
Click to collapse
Related
i have i9100G and when i turn it on it has the pc- - - ! - - - phone picture and i tried with heimdall unbrick and it didn't work and not it made it even worse cause it's bootlooping into the soft brick mode
i tried to flash with odin and it worked but my phone kept bootlooping so it stopped the flash proccess
please tell me how can i unbrick it or what do i have to do for it so it won't bootloop cause than i will flash normally
Flash Rom with Odin and go to recovery and factory reset then reboot
LSGio said:
i have i9100G and when i turn it on it has the pc- - - ! - - - phone picture and i tried with heimdall unbrick and it didn't work and not it made it even worse cause it's bootlooping into the soft brick mode
i tried to flash with odin and it worked but my phone kept bootlooping so it stopped the flash proccess
please tell me how can i unbrick it or what do i have to do for it so it won't bootloop cause than i will flash normally
Click to expand...
Click to collapse
Can you go into Recovery? (Hold Volume Up + Home Button + Power Button)
If so then did u tried Wipe data/factory reset and clearing the cache? (This will delete all the data, be careful)
Hi, I'm not experienced with custom roms, so I bricked my phone trying to install cyanogenmod, please help me
I tried to install custom rom on my xperia p so I unlocked bootloader, rooted and got recovery. Everything seemed to be fine until i tried to flash cyanogenmod, I can't provide link because I'm new user. Using Flashtool I accidentally (not knowing exactly what I'm doing) chose "select system to Flash" and klicked on boot.img from this pack. After several minutes without respond it showed only "Please check the log before rebooting into system" so I disconnected phone. When I try to start, it only shows sony logo for a short while and then it resets, and shows it again and resets... I can only reset it by holding vol+ and power button until it vibrates 3 times, then I can put it in fastboot mode.
Please tell me, what should I do now. And sorry for my bad english.
Flash stock, flash the boot.img in fastboot mode, reboot and flash the zip.
If you did not copy the zip yet boot after flash and copy.
Thank You very much. Everything works fine now, excepting data access via mobile network. I'll try to find the answer in another thread. Thanks again!
Hi guys, I really need your help.
I'm new at this rooting stuffs and I tried to root my Oppo Neo 5.
I tried so many softwares like OneClickRoot, FramaRoot, and Kingroot but none seemed to work.
So I resorted to an app called oppo tools
It worked at first but I got really annoyed when my status bar suddenly colored to red when my phone discharges to 15% so I unrooted my phone and rooted back again. I really thought that was going to fix my problem but that's where the bootloop issue started.
I tried to flash some custom recovery zip but it failed since I only have a stock recovery.
But the thing is, I found a guide that says to rename the clockworkrecovery img to PG86IMG.zip.
So I did tried that and as soon as I flashed the zip from my stock recovery, my phone hanged.
I long-pressed the power button to restart and boot into recovery mode but nothing seems to happen.
I'll try to explain a bit more on how it looks when I boot my device.
When it boots normally (I mean not pressing the volume to enter recovery mode) it will only show the logo but when I try to go into recovery mode it will show the logo with a little text on the lower left portion "Recovery Mode"
Before I flashed the PG86IMG.zip, recovery mode was still working and the charging screen when off is working too.
but after I flashed the zip, every time I try to recovery mode the logo shows up with the little text but RECOVERY MODE isn't working. When I charge my phone it automatically boots up and shows the logo and text like it's trying to go recovery mode (I'm just trying to charge? It's going to recovery mode)
I tried using "adb devices" on cmd but it's not detecting any devices.
I'm really out of ideas guys, I know not all people use this model but what would be your suggestion?
A suggestion on how to fix this would really be appreciated :good:
I'm sorry I'm really new at this, please correct me if I did something wrong starting this thread. :angel:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Salman Al-Badgail said:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Click to expand...
Click to collapse
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
DeepBricked said:
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
Click to expand...
Click to collapse
You made a soft brick, not to worry flash it with correct stock firmware, if the phone is in warranty than ask them to do flash, this will take approx 10-30min. If it isn't in warranty than you should try it own or else pay some amount and the rest they will do.
Salman.
how about bootloop, cant enter recovery, reboot continiously when turn on even going to recovery, only fastboot isnt rebooting automaticaly but pc days drivers not succesfuly installed, and when off it qont detect by pc because of rebooting auto,
where can i find a rom for my oppo neo 5
pls help me pls
Hello all,
First of all, as a disclaimer: I am a total noob in this area. I just got my Ulefone T1, and tried to root it by installing TWRP and then installing SuperSU using TWRP. When I first installed TWRP, it worked and I got into the TWRP recovery menu. However, as the phone had to be wiped, I couldn't install the SuperSU zip anymore. I did a normal reboot to transfer the SuperSU zip to my phone, but when I then tried to turn my phone off and access TWRP, it went to normal recovery mode of my phone. As I wanted to start fresh off again, I went to the settings of my phone and did a factory reset silly.
Now, it is stuck in a bootloop where I can literally do nothing. I cannot access factory mode or recovery mode, all it does is just endlessly boot and turn off. I have managed to turn it off completely, but that's all I can do. Also, the battery is not removable.
Does anyone with a little more knowledge have a suggestion for me? Thanks in advance!
As an update, I got a suggestion to fully drain the battery, but that does not work either. I have tried connecting it to my PC, which is not working, but that was acting weird before. I guess it's just not possible?
did you work this out ? i am stuck in bootloop too ??????
Daviesjosh95 said:
did you work this out ? i am stuck in bootloop too ??????
Click to expand...
Click to collapse
I have no idea what software is necessary to do it for your device but you can flash stock rom, if it uses sp tool or something then download stock rom, use sp tool to flash it. Should be OK after that. As I am not familiar with this device I can't give you any other advice other than flashing stock rom.
Any solutions to unbricking/boot looping?
Have anyone found any solutions to unbricking phone??
Mine also did bootlooping after unlocking bootloader.
I was able to flash successfully but screen fussy and unreadable and not able to touch. I am able to hear but lines are on screen.
I have same problem, please, anyone help, I think I used wrong twrp image
Ulefone T1 Bootloop solution 2019.
I was able to fix the bootloop of my ulefone t1, just flash it with sp flash tool by following this guide:
1. Download the Stock Firmware on your personal computer.
2. Install the USB MTK Drivers (skip if you have it already installed).
3. Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
4. Click the Scatter-loading button to navigate to the stock Rom you just downloaded.
5. Select the Scatter File from the extracted Stock Firmware on your computer.
6. Select the Download Only in the SP flash tool option
7. Click the Download button to start the Formating process.
8. Connect your device via USB to the computer>> holding volume + and volume – button of your device at the same time or holding power button only so that the flashing process will starting working
9. Patiently wait for your device to be formatted.
10. After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
11. Unplug your device and boot it up.
12. If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
13. Voila, you are all good.
Very important step 8 of the guide.
Hello XDA Community,
I just got a Galaxy A40 (SM-A405FN/DS) and flashed TWRP.
Everything was going well, so I decided to try to flash an unofficial LineageOS GSI.
I followed some instructions I found on a website:
- Wipe Vendor, Dalvik/ART cache, Wipe Cache, Data, System, Internal Storage using TWRP Advanced Wipe
- Flash Image to System Partition (Used: lineage-16.0-20191017-UNOFFICIAL-treble_arm64_avN.img.xz)
- Reboot & Pray
I am now stuck in a bootloop, sometimes I am able to start TWRP, but I have tried to flash other images but wasn't successful.
(Loop: Bootscreen -> Warning (Press Power Key) -> Bootscreen -> Blackscreen (Reboot))
I am currently downloading the stock image.
How can I enter recovery mode? Is there anything else I can try?
Got the same goal, installing a Lineage GSI ROM. But... I got stuck in a bootloop just like you after flashing TWRP.
You have any tips getting out of it?
Solution: Okee, I drained my battery first. Then I pressed volume up and down together and connected it to my pc. This way I got it in download mode. (thank god!)
So i managed to get into download mode after being stock in restart loop by holding off button. When screen got black, i plugged my phone into my pc and pressed volume up and down buttons. It worked. I am a genius.
Anyone managed to get a custom ROM to work on that device ?
welpitwentwrong said:
So i managed to get into download mode after being stock in restart loop by holding off button. When screen got black, i plugged my phone into my pc and pressed volume up and down buttons. It worked. I am a genius.
Click to expand...
Click to collapse
YOU ARE AN ABSOLUTE LEGEND THX ALOT