blu dash music 4.0 re flash help - Android Q&A, Help & Troubleshooting

so i have a blu dash music 4.0 and one day i got a encryption unsuccessful error and i clicked reset but it did not boot into recovery mode it booted in to android with a ton of errors in fact i was unable to get to the home-screen so i rebooted to recovery mode and did a hard reset but when i rebooted the same thing happened i tried it five more time and then it wont let me into recovery mode and is in a boot loop it shows the BLU logo for 5-15 seconds then reboots to the same thing i know i have dev options enabled but i don't know if i have usb debuging enabled or if my bootloder is unlocked i cant get it to connect to the computer with the battery but if i take the battery out and plug it in to my computer and press the vol buttons it will connect to the computer for like 5 seconds i have tried re flashing using this tut: "how to use smart phone flash tool to flash any blu smartphone" but it failed
please help thanks

Related

[Q] huawei bootloop - bootloader locked

Hi guys
I tried to install a custom ROM on my huawei ascend g610-u20 android 4.2.2 with mobileuncle tool
my phone was rooted but I forgot to unlock bootloader, anyway after rebooting phone with mobile uncle tool(and selecting recovery.img (CWM method)) it's gone in to a crazy state!!
I searched internet and I figured out that it's huawei boot loop :|, I downloaded the official ROM from huawei website and tried To flash it,
I get error 2004 ( I've installed Meditak Vcom and my device usb driver)
when I turn on my phone with battery it reboots every 5 second , so windows and sp flash tools can't recognize it.
I tried to flash it without battery,when I pressed volume down phone turned on by vibration and after a while it turned of by vibration again!
I can't access to bootloader menu when I press " volume up +volume down + power button" nothing happens! it just turns on phone!( and crazy loop boot circle happens again!)
I'm using windows 8.1 last update , every thing is Ok and my cable is Ok my sd card is Ok and I've downloaded Right ROM for my device(MT6589) and also I'm using sp flash tool last version!
**** I've got access to fast boot mode ****
My main problem is with Error 2004! help me out PLZ!
I couldn't put any screen shot cuz I'm a new user, Sry!
any idea?

TWRP recover boot looping - unable to go into recovery

Hi guys, I flashed cm-13.0-20160820-SNAPSHOT-ZNH5YAO0J2-i9300.zip and everything worked fine BUT I did a factory reset from the system itself not from the recovery and since then my phone is stuck between samsung logo and twrp logo which appears only for a second or two and then back at samsung logo....I cant enter download or recovery mode, I cant turn my phone off, every time I put battery in it, it keeps looping. But I have noticed that when i connect it to my PC it just loops in samsung logo not between twrp and samsung. Help me please ASAP :crying::crying:
Do you have a USB jig to force download mode?
I dont have USB jig, is there any other options? My phone can get to that download mode by pressing buttons and it shows only for a second screen of download mode and then it goes back at looping....
Could be a power button problem?
Well I really dont know because I had removed the button before, it didnt work correctly and now I cant know is it up to button or the software ....

Galaxy S6 Edge (T-Mobile) Bricked

What is working so far
Recovery mode
Download mode
Phone boots but its stuck on 2nd boot animation.
My galaxy s6 edge (T-Mobile - SM-G925T) has been bricked. I flashed the stock android M 6.0.1 firmware through Odin and now my phone does not boot past the second boot animation.
The phone also has a blue led indicator on at all times during this brick.
I tried going to stock recovery and factory resetting the phone with no luck and its still stuck on 2nd boot animation.
I have tried to restore the phone with smart switch but it asks for my serial number which I do not have.
The serial number is not on the back of the phone and I doint have the box.
I put the phone in to download mode and hit the home button to show the "bar code" option but it does not display the serial number at all and its just blank.
I put the phone into download mode tried to flash stock firmware and twrp but it just stays on setup connection in odin by powering off the phone, holding vol down, home power, and vol up again to enter download mode.
But before what I did was I typed the adb commands on my computer to reboot the phone into download mode so I could flash files to the phone through odin but I caint send adb commands to the phone due to this brick.
I did try adb side load in the stock recovery and I tried to side load the stock rom as a flashable zip but it does not want to sideload.
Please help me to solve this problem, thank you very much, I will appreciate all the help.
fahad999 said:
What is working so far
Recovery mode
Download mode
Phone boots but its stuck on 2nd boot animation.
My galaxy s6 edge (T-Mobile - SM-G925T) has been bricked. I flashed the stock android M 6.0.1 firmware through Odin and now my phone does not boot past the second boot animation.
The phone also has a blue led indicator on at all times during this brick.
I tried going to stock recovery and factory resetting the phone with no luck and its still stuck on 2nd boot animation.
I have tried to restore the phone with smart switch but it asks for my serial number which I do not have.
The serial number is not on the back of the phone and I doint have the box.
I put the phone in to download mode and hit the home button to show the "bar code" option but it does not display the serial number at all and its just blank.
I put the phone into download mode tried to flash stock firmware and twrp but it just stays on setup connection in odin by powering off the phone, holding vol down, home power, and vol up again to enter download mode.
But before what I did was I typed the adb commands on my computer to reboot the phone into download mode so I could flash files to the phone through odin but I caint send adb commands to the phone due to this brick.
I did try adb side load in the stock recovery and I tried to side load the stock rom as a flashable zip but it does not want to sideload.
Please help me to solve this problem, thank you very much, I will appreciate all the help.
Click to expand...
Click to collapse
Try again to flash this
http://www.sammobile.com/firmwares/download/89343/G925TUVS4EPH2_G925TTMB4EPH2_TMB/
If it sticks on setup connection again, try a different usb port.
If after this it still bootloops try again to flash twrp and if this works wipe cache/dalvik.
If it doesn't work and just bootloops tell me of any errors you get during the process.
Thank you for the help! I hit the thanks button. I found out why Odin was stuck on setup connection and that was because I was using a bad USB cable, so I tried another cable. After that odin was not stuck on setup connection. Then I flashed stock firmware on Odin and now the phone works!. Thank you for the help!

Htc 620g plus won't enter recovery mode (probably bricked)

Hey there,
I was actually searching a lot about my problem but I can't find a solution anywhere so I wanted to ask you people.
Here is the story;
I tried to install twrp using a 3rd party Google play app it downloaded and said installed the twrp and asked whether I want to reboot the phone or not. Then phone got stuck in bootloop. Looks similar to the other ones but believe me it is not.
Here is why;
- Phone keeps restarting I can't even charge the phone because of that the battery just gets drained so I can't connect it to the pc
- Can't enter recovery or the fast boot mode I tried all key combinations only volume up+power works for me and it shows 3 selections. Recovery mode,fast boot mode,normal boot mode. When I select recovery mode it shows HTC logo and just keeps bootlooping. When I select fast boot mode it just says fast boot mode initiating and gets stuck there ( waited 5 hours ) when I select normal boot it already doesn't boot.
- I can't charge the phone to flash on pc since I have to have at least %35. Whenever I connect charger it starts bootlooping and never stops. Like literally I tried 24 hours and it never stopped.
- I am using Android 4.2.
Does anyone have any idea on fixing this ? This is my work phone and I can't get it to work. This is really very frustrating.
Can anyone help me get to the recovery mode ? Is my phone bricked ? If so is there any way to recover the phone or the data inside of it ? Any help would be much appreciated.
Thanks
So... any ideas ?
Up
It is very interesting how this community has no answer to this question .

MICROMAX XPRESS 2 E313 complete dead no recovery no fast boot no os no usb debugging.

Well few years ago I tried to instal twrp recovery in my micromax E313 but I don't what wrong I did it just didn't instal and delete the stock recovery aswell , however the phone kept working untill today I turned the phone on decided to factory reset , pressed power button and volume down , went to some mode where was many options but I couldn't find wipe data or factory reset , but instead I found "Clear emcc or emmc" I clicked it , the phone restarted but it never loaded to the os (home screen) it was stuck on micromax logo now note here I never turned usb debugging on before back to now , so I tried many things android mukti tool but it keept giving me error in fastboot the phone requested to to turn bootloader on press yes or no I tried pressing on which in case was volume up button , but it never worked "failed" then I tried sp tool and just downloaded firmware , selected scatter file but it just doesn't give me that green tick and now whenever I try to go in fastboot mode , my phone just switch off , so no recovery , no flashboot , no os , no usb debugging , I wanted to know if there's anyway to recover it somehow , it would be very helpful
By the way am new here so if I have posted this new thread in wrong section I request mods to move it to right please.
Thankyou in advance
Edit: the fastboot mode is working found out my battery was low , after charging it works like normal , but still no usb debugging no recovery no os.

Categories

Resources