Hi,
I'm pretty new to Android. I recently rooted my phone (Huawei Ascent Y511 U30) using Framaroot and it worked perfectly after reboot. Then I tried to install Sinhalese fonts using Sinhala Fonts Installer and after installing that, I uninstalled the app before restarting. Then I restarted the phone and it get stuck at the Huawei Logo and will not boot into launcher.
I tried to hard reset by going to recovery mode using Power + (vol up + vol down). (Fortunately I can go into the recovery mode.) Even if I factory reset the phone, the same situation is there. And some articles said to log in to fast boot mode by Power + Vol down, but it doesn't work and just boots into that Huawei logo.
As I read, to install a custom ROM, ClockWork Recovery has to be used, but I can't do it since I can't log into my phone.
Please help me on this. What has gone wrong? Is there any way I can make my phone alive? Or at least, is there any way that I can install ClockWork Recovery without booting into my phone, just using my SD card?
Thank you in advance..!!
gnomezgrave said:
Hi,
I'm pretty new to Android. I recently rooted my phone (Huawei Ascent Y511 U30) using Framaroot and it worked perfectly after reboot. Then I tried to install Sinhalese fonts using Sinhala Fonts Installer and after installing that, I uninstalled the app before restarting. Then I restarted the phone and it get stuck at the Huawei Logo and will not boot into launcher.
I tried to hard reset by going to recovery mode using Power + (vol up + vol down). (Fortunately I can go into the recovery mode.) Even if I factory reset the phone, the same situation is there. And some articles said to log in to fast boot mode by Power + Vol down, but it doesn't work and just boots into that Huawei logo.
As I read, to install a custom ROM, ClockWork Recovery has to be used, but I can't do it since I can't log into my phone.
Please help me on this. What has gone wrong? Is there any way I can make my phone alive? Or at least, is there any way that I can install ClockWork Recovery without booting into my phone, just using my SD card?
Thank you in advance..!!
Click to expand...
Click to collapse
My understanding is that being on that screen @ the logo IS fastboot mode. See if the PC Suite can get you back up and running: http://www.downloads.techdiscussion.in/smartphones/huawei-ascend-y511-pc-suite-and-usb-driver/
The reason a factory reset doesn't help in this situation is that you made a change to /system which isn't much affected when you wipe factory data which is /data partition.
Huawei Y511-U30 stuck at boot logo
I am facing a problem with huawei y511-u30, i have rooted my fone nearly 3 weeks ago with framaroot, every thing was working fine after reboot , i have installed many app, upto 3 weeks the fone was working absolutely fine and now suddenly it stuck at boot logo. my fone automatically turned off in night and turn On again in d morning with "scheduled power ON/Off" options in d setting. today when a wakeup i saw only boot logo.
i removed d battery and tried to restart but i could not, i can't go into recovery, when i press volume (-) and power button or vol (+) and power it stucks on same boot logo,
when i charge the mobile in power OFF mode it doesnot show battery indicator it again starts and stuck on boot logo "Huawei ASCEND"
it has default recovery 3e
any one plz help
problem is solved by updating firmware available on internet
well,,I'm not a developer so I'm not sure if what I'm about to say is going to work, but I have a full backup of my ascend y511-u30 I wonder if you can use my system.img backup and flash it with sp flashtool to recover your phone..
If you get this confirmed by any developer or wanna give it a try yourself you just tell me and I'll send you the files right away
Ahmed Hesham said:
well,,I'm not a developer so I'm not sure if what I'm about to say is going to work, but I have a full backup of my ascend y511-u30 I wonder if you can use my system.img backup and flash it with sp flashtool to recover your phone..
If you get this confirmed by any developer or wanna give it a try yourself you just tell me and I'll send you the files right away
Click to expand...
Click to collapse
You mean by STOCK ROM backup or just phone data?
---------- Post added at 10:58 PM ---------- Previous post was at 10:54 PM ----------
trm33 said:
I am facing a problem with huawei y511-u30, i have rooted my fone nearly 3 weeks ago with framaroot, every thing was working fine after reboot , i have installed many app, upto 3 weeks the fone was working absolutely fine and now suddenly it stuck at boot logo. my fone automatically turned off in night and turn On again in d morning with "scheduled power ON/Off" options in d setting. today when a wakeup i saw only boot logo.
i removed d battery and tried to restart but i could not, i can't go into recovery, when i press volume (-) and power button or vol (+) and power it stucks on same boot logo,
when i cahrge the mobile in power OFF mode it doesnot show battery indicator it again starts and stuck on boot logo "Huawei ASCEND"
it has default recovery 3e
any one plz help
problem is solved by updating firmware available on internet
Click to expand...
Click to collapse
Do you mind explainig about firmware and rom?? I don't get it. Firmware=android version updare or full stock rom? Like I'm using 4.2.2!!.. I don't know much and sorry about my english.
Would like to try the application please send it, you can mail me on [email protected]
Guys it happened to me tooo...and i fixed it...all u have to do is download sp flashtool(google for it)...and google for a stock rom for huawei y511...(sorry i can't upload the files because i'm on a data block)...download sp flashtool and install it and open it...choose the scatter file inside the rom and some files will load to the app select only the recovery file and click the download button...connect your phone to the pc pressing the vol down button..it will flash the recovery to your phone...then boot into cwm recovery of your phone and flash a custom rom...(obviously u have to download one...after that u can change back to stock if you like)...
help plzzz
Help plzzz!
My Huawei Y511 U10 is not booting Can You Help Me To Fix It And if You Have a Rom OF Your Huawei Y511 U10 Plsss Upload It And Give Me The Link
Related
Hi Friends,
My Karbonn A30 has bricked. I did so many experiment on my phone and also stucked several time with some problem but i did solved that problems. Unfortunately this time i am helpless with my phone.Now i am going to explain you what i did with my phone and what problem i am facing.
NOTE: My phone was rooted by using "Root_with_Restore_by_Bin4ry_v18" process.
Two days back i flashed TITAN MOBILE ROM in my Karbonn A30 but that was unsuccessful,After that my phone was not able to boot and also it was not able to boot in recovery mode using Volume up + Power key. Then with some R&D i get a new option using Volume Down + Power key that option is for my mobile hardware test. In that option i formatted my "emmc" then after my phone was able boot in CWMR recovery mode.Then i wiped my all data and system using CWM Recovery,Also did Restore factory.
After that i was regularly getting error message on my phone notification " Phone storage corrupted,Format it" Then i formatted that. Then i installed my all apps from by apps_backup. When i rebooted my phone,again i was getting same error message and didn't any option except format it.
Then i decide to check this error after unrooting my phone. So i remove root access. After that i was not getting this error.
Yesterday again i rooted it with same process and again i was getting same error message after installing apps and reboot my phone.
then i decided to flash new rom with same company phone(Karbonn). So i got ROM for Karbonn S5 from google. I flashed that successfully on my phone i was very happy because this rom was having Jellybean OS(4.1.2). But after some time apps started crashing when i logged in my phone using my gmail as usual i did after every factory reset.
Then i re-flashed the same rom(Karonn S5). This time i decided to do factory reset using phone setting before loggin in google account.
That was my blunder mistake. After pressing factory reset my phone got stuck in boot screen.
Then i tried same option to solve it (Volume down + power ) so i can format emmc again to resolve it. But this time after formatting emmc i was in the same condition on boot looping.
I am not able to go in recovery option using my phone key.
I need you help, i can not go service center because i voided my warranty.
NOTE: Currently my phone is not rooted,I checked it using ADB commands. My USB DEBUGGING is showing on but when i put my phone in" phone hardware check mode( using Volume Down + Power key)".
Plz HELP ME TO SOLVE IT.
djhot143 said:
Hi Friends,
My Karbonn A30 has bricked. I did so many experiment on my phone and also stucked several time with some problem but i did solved that problems. Unfortunately this time i am helpless with my phone.Now i am going to explain you what i did with my phone and what problem i am facing.
NOTE: My phone was rooted by using "Root_with_Restore_by_Bin4ry_v18" process.
Two days back i flashed TITAN MOBILE ROM in my Karbonn A30 but that was unsuccessful,After that my phone was not able to boot and also it was not able to boot in recovery mode using Volume up + Power key. Then with some R&D i get a new option using Volume Down + Power key that option is for my mobile hardware test. In that option i formatted my "emmc" then after my phone was able boot in CWMR recovery mode.Then i wiped my all data and system using CWM Recovery,Also did Restore factory.
After that i was regularly getting error message on my phone notification " Phone storage corrupted,Format it" Then i formatted that. Then i installed my all apps from by apps_backup. When i rebooted my phone,again i was getting same error message and didn't any option except format it.
Then i decide to check this error after unrooting my phone. So i remove root access. After that i was not getting this error.
Yesterday again i rooted it with same process and again i was getting same error message after installing apps and reboot my phone.
then i decided to flash new rom with same company phone(Karbonn). So i got ROM for Karbonn S5 from google. I flashed that successfully on my phone i was very happy because this rom was having Jellybean OS(4.1.2). But after some time apps started crashing when i logged in my phone using my gmail as usual i did after every factory reset.
Then i re-flashed the same rom(Karonn S5). This time i decided to do factory reset using phone setting before loggin in google account.
That was my blunder mistake. After pressing factory reset my phone got stuck in boot screen.
Then i tried same option to solve it (Volume down + power ) so i can format emmc again to resolve it. But this time after formatting emmc i was in the same condition on boot looping.
I am not able to go in recovery option using my phone key.
I need you help, i can not go service center because i voided my warranty.
NOTE: Currently my phone is not rooted,I checked it using ADB commands. My USB DEBUGGING is showing on but when i put my phone in" phone hardware check mode( using Volume Down + Power key)".
Plz HELP ME TO SOLVE IT.
Click to expand...
Click to collapse
Problem has been solved but i am very much unhappy with XDA forum because i am not getting any solution from XDA about my Karbonn A30.
karbon a30 unbrick
djhot143 said:
Problem has been solved but i am very much unhappy with XDA forum because i am not getting any solution from XDA about my Karbonn A30.
Click to expand...
Click to collapse
I think you need so flash tool of mtk download it and install mtk vcom drivers of your phone in PC And download twrp recovery of cherry mobile titan TV download it you need scatter loading file I can give you links of all above files and full procedure when you download twrp recovery select scatter file in so flash tool and untick all only tick recovery click on recovery and select twrp recovery when you done all things you can pull out your phone battery and disconnect USB pull out the battery some seconds and replace it and connect usb and press f9 and recovery will flash then I will give you nandroid backup okk
---------- Post added at 08:14 AM ---------- Previous post was at 08:09 AM ----------
prince khurana said:
I think you need so flash tool of mtk download it and install mtk vcom drivers of your phone in PC And download twrp recovery of cherry mobile titan TV download it you need scatter loading file I can give you links of all above files and full procedure when you download twrp recovery select scatter file in so flash tool and untick all only tick recovery click on recovery and select twrp recovery when you done all things you can pull out your phone battery and disconnect USB pull out the battery some seconds and replace it and connect usb and press f9 and recovery will flash then I will give you nandroid backup okk
Click to expand...
Click to collapse
the link of mtk drivers: forum.gsmhosting.com/vbb/f457/how-install-mtk-driver-windows-xp-vista-7-a-1662956/
signature verification problem
sir,
i also try this ROM in my karbonn a30 ..and also new 4.2 rom
but i got error message
E: signature verification failed
installation aborted.
please tell me how to solve it
my process
i rooted my mobile
power + volume up
then update rom from sd card
update....
E: signature verification failed
installation aborted.
error
plz help me
djhot143 said:
Problem has been solved but i am very much unhappy with XDA forum because i am not getting any solution from XDA about my Karbonn A30.
Click to expand...
Click to collapse
bro i have rooted my Karbonn A30.while changing the font it will restart and now its only showing boot screen plz help me what can i do??
fix
patilprashant777 said:
bro i have rooted my Karbonn A30.while changing the font it will restart and now its only showing boot screen plz help me what can i do??
Click to expand...
Click to collapse
reflash the stock rom
or do factory reset
I've search long and hard ..to no avail. I have a huawei ascend d1 qaud u9510e. Its had a chinese custom recovery and was flashed with MIUI 3.2.22. From the UPdater miui i've been spammed by to do a 'weekly update'' on a daily basis. I read it , it said it didnt delete internal and minimum problem would happen. So I did it. It went through the install phone rebooted. it worked one time till I restarted phone. now i am unable to get back .All i see is the HUAWEI start up logo. it just hangs there. the phone wont turn off just restarts itself to that screen, I am unable to get to custom recovery by holding the power button + volume + which etc. I have the original miui 3.2.22 on my sd card but cannot get to that because of this bootloop/cannot access reovery mode. majority of the time my computer will not reogonize my device but sometimes my computer recognize my phone as adb. How Can I fix it so I can get to a recovery so I can reflash to previous working rom. thank you for your time
T2av said:
I've search long and hard ..to no avail. I have a huawei ascend d1 qaud u9510e. Its had a chinese custom recovery and was flashed with MIUI 3.2.22. From the UPdater miui i've been spammed by to do a 'weekly update'' on a daily basis. I read it , it said it didnt delete internal and minimum problem would happen. So I did it. It went through the install phone rebooted. it worked one time till I restarted phone. now i am unable to get back .All i see is the HUAWEI start up logo. it just hangs there. the phone wont turn off just restarts itself to that screen, I am unable to get to custom recovery by holding the power button + volume + which etc. I have the original miui 3.2.22 on my sd card but cannot get to that because of this bootloop/cannot access reovery mode. majority of the time my computer will not reogonize my device but sometimes my computer recognize my phone as adb. How Can I fix it so I can get to a recovery so I can reflash to previous working rom. thank you for your time
Click to expand...
Click to collapse
you must download U9510E B610 EMUI 2.0 by svikfromorel v02 for XDA search for this in the forum i cant post any link...
unpack, connect the phone to PC and run Flash_all.bat file
after ending a proccess don't forget do wipe data and wipe cache
huawei u9510e bricked
eldukex1 said:
you must download U9510E B610 EMUI 2.0 by svikfromorel v02 for XDA search for this in the forum i cant post any link...
unpack, connect the phone to PC and run Flash_all.bat file
after ending a proccess don't forget do wipe data and wipe cache
Click to expand...
Click to collapse
Hi, I am a newbie to flashing custom Roms. I desperately need help. I have the same phone and the same thing happened to me while trying to flash a ROM. My screen was stuck on huawei logo. Unfortunately, it happened in the middle of the high so by the morning the battery got drained completely. What are my options if any? Please help. I am willing to pay. Thanks a lot in advance.
Hi guys
I tried to install a custom ROM on my huawei ascend g610-u20 android 4.2.2 with mobileuncle tool
my phone was rooted but I forgot to unlock bootloader, anyway after rebooting phone with mobile uncle tool(and selecting recovery.img (CWM method)) it's gone in to a crazy state!!
I searched internet and I figured out that it's huawei boot loop :|, I downloaded the official ROM from huawei website and tried To flash it,
I get error 2004 ( I've installed Meditak Vcom and my device usb driver)
when I turn on my phone with battery it reboots every 5 second , so windows and sp flash tools can't recognize it.
I tried to flash it without battery,when I pressed volume down phone turned on by vibration and after a while it turned of by vibration again!
I can't access to bootloader menu when I press " volume up +volume down + power button" nothing happens! it just turns on phone!( and crazy loop boot circle happens again!)
I'm using windows 8.1 last update , every thing is Ok and my cable is Ok my sd card is Ok and I've downloaded Right ROM for my device(MT6589) and also I'm using sp flash tool last version!
**** I've got access to fast boot mode ****
My main problem is with Error 2004! help me out PLZ!
I couldn't put any screen shot cuz I'm a new user, Sry!
any idea?
Hi guys, I really need your help.
I'm new at this rooting stuffs and I tried to root my Oppo Neo 5.
I tried so many softwares like OneClickRoot, FramaRoot, and Kingroot but none seemed to work.
So I resorted to an app called oppo tools
It worked at first but I got really annoyed when my status bar suddenly colored to red when my phone discharges to 15% so I unrooted my phone and rooted back again. I really thought that was going to fix my problem but that's where the bootloop issue started.
I tried to flash some custom recovery zip but it failed since I only have a stock recovery.
But the thing is, I found a guide that says to rename the clockworkrecovery img to PG86IMG.zip.
So I did tried that and as soon as I flashed the zip from my stock recovery, my phone hanged.
I long-pressed the power button to restart and boot into recovery mode but nothing seems to happen.
I'll try to explain a bit more on how it looks when I boot my device.
When it boots normally (I mean not pressing the volume to enter recovery mode) it will only show the logo but when I try to go into recovery mode it will show the logo with a little text on the lower left portion "Recovery Mode"
Before I flashed the PG86IMG.zip, recovery mode was still working and the charging screen when off is working too.
but after I flashed the zip, every time I try to recovery mode the logo shows up with the little text but RECOVERY MODE isn't working. When I charge my phone it automatically boots up and shows the logo and text like it's trying to go recovery mode (I'm just trying to charge? It's going to recovery mode)
I tried using "adb devices" on cmd but it's not detecting any devices.
I'm really out of ideas guys, I know not all people use this model but what would be your suggestion?
A suggestion on how to fix this would really be appreciated :good:
I'm sorry I'm really new at this, please correct me if I did something wrong starting this thread. :angel:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Salman Al-Badgail said:
@DeepBricked please confirm your problem, Boot-loop and can enter into recovery.
Click to expand...
Click to collapse
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
DeepBricked said:
Oh, I'm sorry, I didn't notice.
Lately I can't access the recovery mode but now
I'm currently on Boot-loop and I can enter into recovery.
The ColorOS recovery mode only have limited function that I can mess around.
It only has the apply update, wipe data and cache, reboot, power off and system file verification.
As always I already did wipe the data and cache but nothing happens. Still boot-loop.
What should I do?
Click to expand...
Click to collapse
You made a soft brick, not to worry flash it with correct stock firmware, if the phone is in warranty than ask them to do flash, this will take approx 10-30min. If it isn't in warranty than you should try it own or else pay some amount and the rest they will do.
Salman.
how about bootloop, cant enter recovery, reboot continiously when turn on even going to recovery, only fastboot isnt rebooting automaticaly but pc days drivers not succesfuly installed, and when off it qont detect by pc because of rebooting auto,
where can i find a rom for my oppo neo 5
pls help me pls
Hello,
Im new here and im not sure if here is the correct place to ask questions but,
I have a Huawei Y5 II and i was trying to put android 6.0 or higher but i had alot of problems.
I first unlocked my bootloader and then installed a custom recovery TWRP and CWM on it, but i never succeeded in booting into one of them.
What happened is that i saw in a post here on xda that with a certain command in fastboot mode i can remove the custom recoveries ( because they didnt work at all) but when i did it i ended up formatting my whole system,cache and boot.
Now my phone just stays on the huawei logo when i turn it on and nothing else.
i tried to install a custom recovery again throught the fastboot mode using adb on my pc, but when i press the vol up+ power my phone just keeps restarting and restarting and staying on the logo.
Thanks in advance for your time spent on reading my problem i just wanna use my phone again cuz i love it. <3
Hi, try to flash latest stock firmware for SD update here is example but do for your model and region !!!
http://huawei-firmware.com/rom/huawei-y5ii/cunu29/1719
Good Luck
Thanks you, but i would do that if i had access to my recovery!
If i press the keys my phone just restarts and restarts until i let the keys off, then again... just the logo.
my phone still is in warranty and i can give it to my distributor so their service fixes it.... but i dont really want that.. i just wanna fix it and use it as before.
well..
i had my phone to service and i got it fixed for 100 bucks. :/ i really am a sadman