Hello,
Im new here and im not sure if here is the correct place to ask questions but,
I have a Huawei Y5 II and i was trying to put android 6.0 or higher but i had alot of problems.
I first unlocked my bootloader and then installed a custom recovery TWRP and CWM on it, but i never succeeded in booting into one of them.
What happened is that i saw in a post here on xda that with a certain command in fastboot mode i can remove the custom recoveries ( because they didnt work at all) but when i did it i ended up formatting my whole system,cache and boot.
Now my phone just stays on the huawei logo when i turn it on and nothing else.
i tried to install a custom recovery again throught the fastboot mode using adb on my pc, but when i press the vol up+ power my phone just keeps restarting and restarting and staying on the logo.
Thanks in advance for your time spent on reading my problem i just wanna use my phone again cuz i love it. <3
Hi, try to flash latest stock firmware for SD update here is example but do for your model and region !!!
http://huawei-firmware.com/rom/huawei-y5ii/cunu29/1719
Good Luck
Thanks you, but i would do that if i had access to my recovery!
If i press the keys my phone just restarts and restarts until i let the keys off, then again... just the logo.
my phone still is in warranty and i can give it to my distributor so their service fixes it.... but i dont really want that.. i just wanna fix it and use it as before.
well..
i had my phone to service and i got it fixed for 100 bucks. :/ i really am a sadman
Related
After struggling for months, I was finally able to root my Karbonn A27 using Root Master. Soon after rooting, I couldn't resist the urge to install a custom rom.The stock rom was giving me a lot of issues, one of the major problem being the heating issue.
So as a next step, I tried to flash the recovery. I took a chance and flashed the CWMrecovery which was not meant for my device. (The CWM I used was actually meant for Karbonn A21)
As a result of that, I got my phone bricked. (Soft bricked caught on bootloop) Luckily, I am able to put the phone on Fastboot mode though.
To unbrick my phone, I understand that I need to find the stock rom for my device. So that I can re-flash all the images in Fastboot mode. The problem is I am not to find the Stock Rom on the internet. Please let me know if there is any other alternate way to get out of jail.
Notable things:
1) One interested thing, that I would like to share about my phone is that, while booting if I press the "power and up arrow" button together it takes me to weird screen showing hardware information. It does nothing after that, I will have to remove and reinsert the battery to make it boot again.
2) Another thing, after restarting the phone by pressing the power button later if I press the "UP and DOWN" arrow key together. It takes me to another screen which reads "Fastboot" mode displaying options for recovery and factory reset
Please help guyz... I strongly believe xda is the only place in this world that can fix this phone now for me.
:crying: Please help guyz...
HELP...................
Hi,
I'm pretty new to Android. I recently rooted my phone (Huawei Ascent Y511 U30) using Framaroot and it worked perfectly after reboot. Then I tried to install Sinhalese fonts using Sinhala Fonts Installer and after installing that, I uninstalled the app before restarting. Then I restarted the phone and it get stuck at the Huawei Logo and will not boot into launcher.
I tried to hard reset by going to recovery mode using Power + (vol up + vol down). (Fortunately I can go into the recovery mode.) Even if I factory reset the phone, the same situation is there. And some articles said to log in to fast boot mode by Power + Vol down, but it doesn't work and just boots into that Huawei logo.
As I read, to install a custom ROM, ClockWork Recovery has to be used, but I can't do it since I can't log into my phone.
Please help me on this. What has gone wrong? Is there any way I can make my phone alive? Or at least, is there any way that I can install ClockWork Recovery without booting into my phone, just using my SD card?
Thank you in advance..!!
gnomezgrave said:
Hi,
I'm pretty new to Android. I recently rooted my phone (Huawei Ascent Y511 U30) using Framaroot and it worked perfectly after reboot. Then I tried to install Sinhalese fonts using Sinhala Fonts Installer and after installing that, I uninstalled the app before restarting. Then I restarted the phone and it get stuck at the Huawei Logo and will not boot into launcher.
I tried to hard reset by going to recovery mode using Power + (vol up + vol down). (Fortunately I can go into the recovery mode.) Even if I factory reset the phone, the same situation is there. And some articles said to log in to fast boot mode by Power + Vol down, but it doesn't work and just boots into that Huawei logo.
As I read, to install a custom ROM, ClockWork Recovery has to be used, but I can't do it since I can't log into my phone.
Please help me on this. What has gone wrong? Is there any way I can make my phone alive? Or at least, is there any way that I can install ClockWork Recovery without booting into my phone, just using my SD card?
Thank you in advance..!!
Click to expand...
Click to collapse
My understanding is that being on that screen @ the logo IS fastboot mode. See if the PC Suite can get you back up and running: http://www.downloads.techdiscussion.in/smartphones/huawei-ascend-y511-pc-suite-and-usb-driver/
The reason a factory reset doesn't help in this situation is that you made a change to /system which isn't much affected when you wipe factory data which is /data partition.
Huawei Y511-U30 stuck at boot logo
I am facing a problem with huawei y511-u30, i have rooted my fone nearly 3 weeks ago with framaroot, every thing was working fine after reboot , i have installed many app, upto 3 weeks the fone was working absolutely fine and now suddenly it stuck at boot logo. my fone automatically turned off in night and turn On again in d morning with "scheduled power ON/Off" options in d setting. today when a wakeup i saw only boot logo.
i removed d battery and tried to restart but i could not, i can't go into recovery, when i press volume (-) and power button or vol (+) and power it stucks on same boot logo,
when i charge the mobile in power OFF mode it doesnot show battery indicator it again starts and stuck on boot logo "Huawei ASCEND"
it has default recovery 3e
any one plz help
problem is solved by updating firmware available on internet
well,,I'm not a developer so I'm not sure if what I'm about to say is going to work, but I have a full backup of my ascend y511-u30 I wonder if you can use my system.img backup and flash it with sp flashtool to recover your phone..
If you get this confirmed by any developer or wanna give it a try yourself you just tell me and I'll send you the files right away
Ahmed Hesham said:
well,,I'm not a developer so I'm not sure if what I'm about to say is going to work, but I have a full backup of my ascend y511-u30 I wonder if you can use my system.img backup and flash it with sp flashtool to recover your phone..
If you get this confirmed by any developer or wanna give it a try yourself you just tell me and I'll send you the files right away
Click to expand...
Click to collapse
You mean by STOCK ROM backup or just phone data?
---------- Post added at 10:58 PM ---------- Previous post was at 10:54 PM ----------
trm33 said:
I am facing a problem with huawei y511-u30, i have rooted my fone nearly 3 weeks ago with framaroot, every thing was working fine after reboot , i have installed many app, upto 3 weeks the fone was working absolutely fine and now suddenly it stuck at boot logo. my fone automatically turned off in night and turn On again in d morning with "scheduled power ON/Off" options in d setting. today when a wakeup i saw only boot logo.
i removed d battery and tried to restart but i could not, i can't go into recovery, when i press volume (-) and power button or vol (+) and power it stucks on same boot logo,
when i cahrge the mobile in power OFF mode it doesnot show battery indicator it again starts and stuck on boot logo "Huawei ASCEND"
it has default recovery 3e
any one plz help
problem is solved by updating firmware available on internet
Click to expand...
Click to collapse
Do you mind explainig about firmware and rom?? I don't get it. Firmware=android version updare or full stock rom? Like I'm using 4.2.2!!.. I don't know much and sorry about my english.
Would like to try the application please send it, you can mail me on [email protected]
Guys it happened to me tooo...and i fixed it...all u have to do is download sp flashtool(google for it)...and google for a stock rom for huawei y511...(sorry i can't upload the files because i'm on a data block)...download sp flashtool and install it and open it...choose the scatter file inside the rom and some files will load to the app select only the recovery file and click the download button...connect your phone to the pc pressing the vol down button..it will flash the recovery to your phone...then boot into cwm recovery of your phone and flash a custom rom...(obviously u have to download one...after that u can change back to stock if you like)...
help plzzz
Help plzzz!
My Huawei Y511 U10 is not booting Can You Help Me To Fix It And if You Have a Rom OF Your Huawei Y511 U10 Plsss Upload It And Give Me The Link
I've search long and hard ..to no avail. I have a huawei ascend d1 qaud u9510e. Its had a chinese custom recovery and was flashed with MIUI 3.2.22. From the UPdater miui i've been spammed by to do a 'weekly update'' on a daily basis. I read it , it said it didnt delete internal and minimum problem would happen. So I did it. It went through the install phone rebooted. it worked one time till I restarted phone. now i am unable to get back .All i see is the HUAWEI start up logo. it just hangs there. the phone wont turn off just restarts itself to that screen, I am unable to get to custom recovery by holding the power button + volume + which etc. I have the original miui 3.2.22 on my sd card but cannot get to that because of this bootloop/cannot access reovery mode. majority of the time my computer will not reogonize my device but sometimes my computer recognize my phone as adb. How Can I fix it so I can get to a recovery so I can reflash to previous working rom. thank you for your time
T2av said:
I've search long and hard ..to no avail. I have a huawei ascend d1 qaud u9510e. Its had a chinese custom recovery and was flashed with MIUI 3.2.22. From the UPdater miui i've been spammed by to do a 'weekly update'' on a daily basis. I read it , it said it didnt delete internal and minimum problem would happen. So I did it. It went through the install phone rebooted. it worked one time till I restarted phone. now i am unable to get back .All i see is the HUAWEI start up logo. it just hangs there. the phone wont turn off just restarts itself to that screen, I am unable to get to custom recovery by holding the power button + volume + which etc. I have the original miui 3.2.22 on my sd card but cannot get to that because of this bootloop/cannot access reovery mode. majority of the time my computer will not reogonize my device but sometimes my computer recognize my phone as adb. How Can I fix it so I can get to a recovery so I can reflash to previous working rom. thank you for your time
Click to expand...
Click to collapse
you must download U9510E B610 EMUI 2.0 by svikfromorel v02 for XDA search for this in the forum i cant post any link...
unpack, connect the phone to PC and run Flash_all.bat file
after ending a proccess don't forget do wipe data and wipe cache
huawei u9510e bricked
eldukex1 said:
you must download U9510E B610 EMUI 2.0 by svikfromorel v02 for XDA search for this in the forum i cant post any link...
unpack, connect the phone to PC and run Flash_all.bat file
after ending a proccess don't forget do wipe data and wipe cache
Click to expand...
Click to collapse
Hi, I am a newbie to flashing custom Roms. I desperately need help. I have the same phone and the same thing happened to me while trying to flash a ROM. My screen was stuck on huawei logo. Unfortunately, it happened in the middle of the high so by the morning the battery got drained completely. What are my options if any? Please help. I am willing to pay. Thanks a lot in advance.
Hello community,
I haven't posted here before, so I hope I'm not doing anything wrong.
I have a problem with my Neffos X1 and after browsing the internet for hours nothing helped so far, so I hope some of you can help me out.
My phone is stuck in a bootloop since yesterday evening. I haven't done any updates or new installations recently, so it just happened out of the blue. It loads till the Neffos logo and then restarts over and over again.
Since I can't take the battery out, I tried letting it run out of energy and then restart, but as soon as I connect it to a power source the bootloop will start again.
I read a lot about getting it in recovery mode or to try and flash it, but no matter what combination of buttons I try, nothing is happening. The phone basically doesn't react to anything and just keeps restarting. The only thing I noticed is, that when pushing both volume keys the screen will just stay black (no restarting), but after letting go the bootloop will start again.
I tried flashing it via SP Flash Tools, but the phone also doesn't react to it.
Lots of troubleshooting guides also require, that I have rooted my phone in the past, unfortunatly I haven't. I also read about unlocking the bootloader, but since my phone isn't reacting to any buttons and my laptop also doesn't seem to recognize my phone (probably because it doesn't boot proberly), that doesn't seem like a solution either.
To summarize: I'm stuck in a bootloop with no recovery mode, no rooting, no unlocking bootloader, probably can only use my laptop to do anything remotely.
So, is there anything you can think of, that might help me get out of the bootloop? Or ideas of what I may did wrong when trying the other solutions?
Thanks for any help in advance.
Same problem
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Shotzo said:
I have the same problem, I have tried all kinds of soft reset and nothing is working I also opened the phone to check if anything was not connected properly, but everything seems fine except for that infinite loop. Please help!
Click to expand...
Click to collapse
Try this
Download phone's Stock Firmware onto your personal computer.
Install the USB MTK Drivers - NOT ANY OTHERS (skip if you have them already installed).
Download and Launch the Smart Phone Flash Tool (SP Flash Tool)
Click the Scatter-loading button to navigate to the Stock Rom you just downloaded.
Select the Scatter File from the extracted Stock Firmware on your computer.
Select the Download Only in the SP flash tool option
Click the Download button to start the Formating process.
Connect your phone via USB to the computer>> holding volume + and volume – button of your phone at the same time or holding power button only so that the flashing process will starting working
Patiently wait for your device to be formatted.
After the formatting is done, a Big Green button will pop up on the SP Flash to show that.
Unplug phone and boot it up.
If you have a boot loop after booting your device, boot into recovery mode and do a factory reset.
Voila, you are all good.
Hello, so my phone is stuck in an infinite bootloop orange statefrom unlocking the bootloader and flashing the wrong version of TWRP....... It is a Wiko Tinno, SAS, U307AS... These are the names ive found looking for help. Its a government phone from assurance wireless... But basically i got this hone from my girlfriend i thought it was a wiko ride.... 30 minutes after given this phone i got it stucl in bootloop xD i found a tutorial on here i beleive to root a wiko ridge.... i unlocked the bootloader.... tried to install TWRP once, the phone rbooted to the setup as it factory reset from the bootloader unlock but when i went to recovery TWRP wasnt there.... Why? because it wasnt the right version for my phone..but as i am a little on the slow side i tried it again..... thats when it wouldnt even boot passed the orange state logo screen.... and since i tried to install a cust recovery guess what? i cant get into recovery mode..... the phone freezes and reboots back into bootloop. unlocking the bootloader im pretty sure assurance wireless wont like it and probably wont replace it..... i have been searching the internet and ive tried most things ive found ive tried flash tools sdk tools mtk tools flashing scatter files etc etc... i try and search for a way to fix it every couple days... its been about 3 months now.... im kind of running out of patience ive went as far as opening the back and replugging most of the films in hopes it would reset something to make it work.. if anyone has any ideas or anything please i would love to know...... on phone specs its tinno U307AS assurance its wiko life 2 and some weird gov. phone website its wiko SAS idk..
IMHO you're advised to re-flash phone's Stock ROM by means of Wiko Phone Flash Tool.
jwoegerbauer said:
IMHO you're advised to re-flash phone's Stock ROM by means of Wiko Phone Flash Tool.
Click to expand...
Click to collapse
i have. i just tried again. i cannot find a firmware or stock rom for my device. i have even tried to usea mt6739 scatter file.
im no beginner to phones here..but im seriously stumped.
Maybe this helps:
Unplug your phone from PC if it's connected. Shut down your phone by clicking and holding for approx 10 secs ALL THREE BUTTONS: VOL UP + VOL DOWN + POWER. If you do this properly, your phone should not self-boot into Orange State anymore.
jwoegerbauer said:
Maybe this helps:
Unplug your phone from PC if it's connected. Shut down your phone by clicking and holding for approx 10 secs ALL THREE BUTTONS: VOL UP + VOL DOWN + POWER. If you do this properly, your phone should not self-boot into Orange State anymore.
Click to expand...
Click to collapse
i fully charged my phone to test it out sadly it hadnt worked :\
Here ya go: https://rootmygalaxy.net/download-wiko-stock-firmware/
So I am having same issue after attempting to flash boot.img and now I cant access fastboot mode recovery mode I cant even hard reset it plus now I cant even get computer to recognize device HELP!!!