Related
guys I have a weird problem, I installed honeycomb foliomod then I switched to 1.4 and I lost so I went back to the recovery cmw classic, now when I go to install cmw (cmw compatible for any folio) I get the droid with the signal of danger so I'm obliged to restart the tablet, and now I can not install the recovery, now someone can give me a little hand to understand how do I install cmw?
The fastest way is to install it via fastbooot.
you have a guide to install via fastboot? I honestly do not even know what this is fastboot, excuse my ignorance.
Just find my guide in General and then look into my HC thread for tutorial of using fastboot and then type:
fastboot erase recovery
fastboot flash recovery recovery.img reboot
Sent from my IDEOS S7 Slim using XDA App
I have a small problem with the fastboot, I wrote out the cmd <waiting device> for ... I do not understand what's the problem
I noticed that the drivers will not install, you have a method to install drivers Folio 100?
Are you using W7 or Linux?
follow this guide
http://forum.xda-developers.com/showthread.php?t=1119507
you need @windows every single step. Deinstall the old Drivers
best regards
I have windows 7, any suggestions?
however, I want to thank you for the answers you are giving me.
mauri90 said:
I have windows 7, any suggestions?
however, I want to thank you for the answers you are giving me.
Click to expand...
Click to collapse
Follow what realmausi has posted. That will setup the drivers in Win 7 and allow you to communicate with the folio when it's in fastboot mode...
thanks a lot guys, really do not know how to thank you, finally I made it through Davvi not as stupid as I thought it would pass, the problem was in the drivers, thanks again
Hi all, i made a terrible mistake and installed cyanogen 10 for nexus 7 on my protab2xxl tablet.
Is there any way to save my tablet?
Cant use touchscreen so im using mouse/keyboard, but i tried 100 ways to fix it and cant do it.
Recovery mode always goes to Android 3e and not CWM, so im getting "signature verification failed" error
and i cant install the correct cyanogen mod.
Also tried with nexus tool without any luck.
If anybody can help, it would be much appreciated. I will PayPal $10 if somebody helps me to fix this tablet.
OK....
Try this method it will help you
1)Download ADT (android download tool)
2)Download and install all usb drivers of ur device.
3)Boot into download mode .
4)connect usb.
5)DONT DO ANYTHING ELSE. STATED.
IN ERASE TICK
BOOT
SYSTEM
USERDATA
RECOVERY.
Click begain
Then download a compitable recovery cmw of ur device
Then open adt and in ARM11
tick recovery and browse recovery.img click begain.
It will flash the recovery
now reboot to recovery and flash any rom of ur choice.
Hit thanks....
yash.pranjale86 said:
OK....
Try this method it will help you
1)Download ADT (android download tool)
2)Download and install all usb drivers of ur device.
3)Boot into download mode .
4)connect usb.
5)DONT DO ANYTHING ELSE. STATED.
IN ERASE TICK
BOOT
SYSTEM
USERDATA
RECOVERY.
Click begain
Then download a compitable recovery cmw of ur device
Then open adt and in ARM11
tick recovery and browse recovery.img click begain.
It will flash the recovery
now reboot to recovery and flash any rom of ur choice.
Hit thanks....
Click to expand...
Click to collapse
i have no idea how to do steps 2 and 3
do i need now drivers for nexus 7 or protab2xxl?
how to install them? i tried with live suite but its not recognizing the tablet.
how to boot into download mode?
Go to official site of ur device and download usb drivers of ur device or just google it
These are .exe files install them normally on ur PC
Just search google about the key combination to boot in download mode or search on xda
Or try booting in bootloader and then follow steps below
Sent from my A60 using xda app-developers app
yash.pranjale86 said:
Go to official site of ur device and download usb drivers of ur device or just google it
These are .exe files install them normally on ur PC
Just search google about the key combination to boot in download mode or search on xda
Or try booting in bootloader and then follow steps below
Sent from my A60 using xda app-developers app
Click to expand...
Click to collapse
I downloaded the drivers, but there is no exe files:
i50.tinypic.com/bi0zvd.png
If they are not setup files then they are in which format ?
Are u sure u downloaded correct drivers for correct operating system ex- exe for windows etc
U have to install it on computer with Microsoft windows os
Or follow tutorial for installing drivers on pc go the official site or search Google .
yash.pranjale86 said:
If they are not setup files then they are in which format ?
Are u sure u downloaded correct drivers for correct operating system ex- exe for windows etc
U have to install it on computer with Microsoft windows os
Or follow tutorial for installing drivers on pc go the official site or search Google .
Click to expand...
Click to collapse
I use Windows 7 64
I downloaded the lates firmware: 10 inch TAB-PROTAB2XXL(4.1)-Android 4.0-20120409.zip
Inside there are 3 folders: LiveSuite, 10 inch TAB-PROTAB2XXL(4.1)20120409, UsbDriver
In UsbDriver there are 7 files and non of them is .exe:
usbdrv.inf
usbdrv.sys
usbdrv_AMD64.sys
usbdrv_IA64.sys
usbdrvi64.cat
usbdrvx64.cat
usbdrvx86.cat
I also tried to install with "Device Manager", but when i click on UsbDriver it gives me empty folder.
Sorry i cant post image links. I dont have 10 posts yet.
Download this PDF file
It contains all the instructions
Its ur device official tutorial given by company.
Will work 100% for you
Download link
downloads.pointofview-online.com/Dr...are upgrade Mobii 10 Inch ProTab2XXL V1 3.pdf
IF THIS DOES NOT WORK JUST INSTALL THE USB DRIVERS AS GIVEN IN PDF THEN FOLLOW MY TUTORIAL ABOVE.
Hope ur problem gets solved as soon as possible.
yash.pranjale86 said:
Download this PDF file
It contains all the instructions
Its ur device official tutorial given by company.
Will work 100% for you
Download link
downloads.pointofview-online.com/Dr...are upgrade Mobii 10 Inch ProTab2XXL V1 3.pdf
IF THIS DOES NOT WORK JUST INSTALL THE USB DRIVERS AS GIVEN IN PDF THEN FOLLOW MY TUTORIAL ABOVE.
Hope ur problem gets solved as soon as possible.
Click to expand...
Click to collapse
I think im going to break the fking thing. Im on the edge of my nerves.
I manage to reset it to its original android 4.03 and touchscreen is working now, but
still getting the same "signature verification failed" error when in recovery mode 3e.
Also, tablet is not recognized by ROM Manager CWM, so booting to that recovery and
toggle between signature verification option is not an option.
I think there is no "download mode" on this tablet.
Anything else that you suggest? Im running out of options and the tablet already
received couple of punches. Not sure how long is going to last.
i guess download mode is the recovery mode? When android is on his back?
Anybody got any advice?
SuperOneClick says that my tablet is rooted, but SuperUser cant gain root access. Also i installed Titanium Backup and its same, cant gain access to the root.
What else can i try? Is this tablet lost?
Did u tried to install the USB drivers from the method given in PDF file
Use z4root to root ur tablet.
Thank You Yash for all your help. Finally managed to install Cyanogenmod.
So wow ur done ......
Sent from my A60 using xda app-developers app
hello to everyone
i am new to this forum, and i have some questions about JB ROM for xperia Mini Pro SK17i
my xperia mini pro is rooted, and i also have CWM on it, only thing that i have not done is unlock bootloader, and unlocking is allowed
i want to install this JB ROM on my xperia - http://forum.xda-developers.com/showthread.php?t=2032900
now my question is, what i need to do, or to be precise, what to wipe in CWM to install this, and do i need to unlock bootloader first to be able to install JB ROM ??
do i need to wipe data, wipe cache, wipe dalvik, or only data ???
i wanted to post in thread for the ROM, but since i am new here, i am not allowed to do so
so if someone is willing to help me, and give me advice what to do i will be gratefuller
i now how to flash kernels and that stuff, but this is my first tryout with custom ROM, and i don't want to mess up my phone
Very easy, but first you need to unlock your bootloader. Use this tool to unlock the bootloader, here. Link for the tool here.
Then:
Flash boot.img (in the zip)
Install Zip (Rom)
Install Gapps
Wipe data (do this first and only once and never do it again)
You can also read my FAQ for JB 4.2.2 here, for clarify some doubts you may have
P.S: Ignores the post by radwan020, he is a little confused.
best rom
dev0lver said:
hello to everyone
i am new to this forum, and i have some questions about JB ROM for xperia Mini Pro SK17i
my xperia mini pro is rooted, and i also have CWM on it, only thing that i have not done is unlock bootloader, and unlocking is allowed
i want to install this JB ROM on my xperia - http://forum.xda-developers.com/showthread.php?t=2032900
now my question is, what i need to do, or to be precise, what to wipe in CWM to install this, and do i need to unlock bootloader first to be able to install JB ROM ??
do i need to wipe data, wipe cache, wipe dalvik, or only data ???
i wanted to post in thread for the ROM, but since i am new here, i am not allowed to do so
so if someone is willing to help me, and give me advice what to do i will be gratefuller
i now how to flash kernels and that stuff, but this is my first tryout with custom ROM, and i don't want to mess up my phone
Click to expand...
Click to collapse
this is best rom rely its good rom and stable http://forum.xda-developers.com/showth
radwan020 said:
this is best rom rely its good rom and stable http://forum.xda-developers.com/showth
Click to expand...
Click to collapse
He did not ask for best rom
Besides, the links dead (incomplete)
Regards
-N
mauam said:
Very easy, but first you need to unlock your bootloader. Use this tool to unlock the bootloader, here. Link for the tool here.
Then:
Flash boot.img (in the zip)
Install Zip (Rom)
Install Gapps
Wipe data (do this first and only once and never do it again)
.
Click to expand...
Click to collapse
can you please explain how to flash boot.img
i have flashtool installed, so how do i need to set it up to install that
and for wipe data, i need to wipe that after installing gapps or ??
dev0lver said:
can you please explain how to flash boot.img
i have flashtool installed, so how do i need to set it up to install that
and for wipe data, i need to wipe that after installing gapps or ??
Click to expand...
Click to collapse
First u need to install all the drivers in flashtool/dricers
Then start flashtool, select lightning button, choose fastboot mode, and choose your boot.img file
Connect your fone in fastboot mode (vol up and connect)
It should begin flashing.
If u don't want to go through all that trouble, you can see the kernel flasher in my sig
Regards
-N
mnishamk said:
First u need to install all the drivers in flashtool/dricers
Then start flashtool, select lightning button, choose fastboot mode, and choose your boot.img file
Connect your fone in fastboot mode (vol up and connect)
It should begin flashing.
-N
Click to expand...
Click to collapse
thanks for response
but i have installed already flashtool, i needed it to downgrade kernel so i can root the phone, so i have drivers
now i only need to unlock bootloader, but it seems that i have some problems, i will try on my gf's lap with win 7, because on my win 8 lap i can't unlock bootloader with SE Bootloader_Unlocking_Relocking 1.6, and i have flashtool with drivers installed and also SDK manager installed
i can't get the unlock code with the program, but i got it from SE site
after manually entering IMEI and unlock code an clicking unlock bootloader nothing happens and program freezes
i need to try option over SDK and CMD, if that is not working then i will post screenshots for problems i have
Well u could try unlocking it mannually.
U know, the hard way. Then u can flash kernels
Regards
-N
mnishamk said:
Well u could try unlocking it mannually.
U know, the hard way. Then u can flash kernels
Regards
-N
Click to expand...
Click to collapse
is there any way to install drivers properly on win 8 ??
because i am using them, and drivers always fail to install with flashtool 0.9.10.1, few of them only installs, others no
i tried on my gf laptop with win 7, and there drivers install with no problem, but then i have problem with unlocking bootloader with flashtool
in flashtool it says that my bootloader is unlocked, but my configuration says unlocking available, not unlocked
i did not manage to try this method on her laptop because i did not have enough time - http://forum.xda-developers.com/showthread.php?p=31376248#post31376248 - but on my laptop, since drivers are not installed properly i am unable to unlock it, when i enter command in CMD to check version of fastboot i am getting waiting for device, and nothing happens
also automated unlocker, SE bootloader unlocker 1.6, also does not work, program freezes when i click unlock bootloader
here are pictures of flashtool and my configuration
Have you installed Microsoft .NET Framework 2.0 or higher to run stable , as the OP saying? I use that tool on my w7 64bit without any problem. Have you installed the Flashtool-drivers that is inside the SE Bootloader_Unlocking_Relocking tool?
mauam said:
Have you installed Microsoft .NET Framework 2.0 or higher to run stable , as the OP saying? I use that tool on my w7 64bit without any problem. Have you installed the Flashtool-drivers that is inside the SE Bootloader_Unlocking_Relocking tool?
Click to expand...
Click to collapse
i have Microsoft.NET Framework 3.5 currently and 4.5
i have tried to install flashtool divers that came with flashtool 0.9.10.1, and the one with SE Bootloader_Unlocking_Relocking, but with both i got errors (red crosses) that shows they failed to install
dev0lver said:
i have Microsoft.NET Framework 3.5 currently and 4.5
i have tried to install flashtool divers that came with flashtool 0.9.10.1, and the one with SE Bootloader_Unlocking_Relocking, but with both i got errors (red crosses) that shows they failed to install
Click to expand...
Click to collapse
Windows 7 or 8? 32 or 64bit? Try this tutorial, here. Remember to unlock bootloader you need to unable USB debugging.
mauam said:
Windows 7 or 8? 32 or 64bit?
Click to expand...
Click to collapse
i have windows 8 x64
dev0lver said:
i have windows 8 x64
Click to expand...
Click to collapse
It works just fine for me with w7 64bit. Have you enabled the USB debugging? How to enable: Settings ->Development options and Selected USB Debugging.
mauam said:
It works just fine for me with w7 64bit. Have you unabled the USB debugging.
Click to expand...
Click to collapse
i have tried guide you gave me above, but on my win 8 is not working because drivers fail to install
i did not have time to try that option on my gf laptop
i have enabled USB debuging, Unknown sources and USB connection is MSC
dev0lver said:
i have tried guide you gave me above, but on my win 8 is not working because drivers fail to install
i did not have time to try that option on my gf laptop
i have enabled USB debuging, Unknown sources and USB connection is MSC
Click to expand...
Click to collapse
So the solution is to try it in your girlfriend's lap. Sorry.
mauam said:
So the solution is to try it in your girlfriend's lap. Sorry.
Click to expand...
Click to collapse
i will try in a few days when she comes to me
Nope you can easily get it working. Just serach for disabling driver signature enforcement in win 8. Do it and then install drivers.
Also if you are on the go but get access to a pc, you can try kernel flashing tools (see sig) to flash kernels without installing any drivers
Regards
-N
Right now my phone is stuck in recovery with no ROM installed, so I tried to adb sideload one.
Whenever I try to do anything with adb, my phone does not register at all with my computer under adb devices.
Is there any way someone could help?
cortem said:
Right now my phone is stuck in recovery with no ROM installed, so I tried to adb sideload one.
Whenever I try to do anything with adb, my phone does not register at all with my computer under adb devices.
Is there any way someone could help?
Click to expand...
Click to collapse
What is your recovery?
cortem said:
Right now my phone is stuck in recovery with no ROM installed, so I tried to adb sideload one.
Whenever I try to do anything with adb, my phone does not register at all with my computer under adb devices.
Is there any way someone could help?
Click to expand...
Click to collapse
Make sure u have installed the drivers on ur PC.....
If u havent installed Try HTC Sync that will automatically install the necessary drivers...........
Gud luck
Danny Samuel said:
Make sure u have installed the drivers on ur PC.....
If u havent installed Try HTC Sync that will automatically install the necessary drivers...........
Gud luck
Click to expand...
Click to collapse
Also, let us know the OS you are using.. Win 8 x64 is a tricky BS.. sometimes the drivers work, some times they don't...
for my recovery, I have TWRP 2.5.0.0
I'll check my drivers just in case.
For my computer OS, I have windows 7 x64
I'm on Windows 7 and had the same problem the other night when I needed to sideload a rom, it just would not find my device. Even though I had previously flashed kernels without any issues.
I ended up removing the drivers, re-installing them using Hassoons toolkit and rebooting both PC and phone. It will work, just can be a bit finnicky. I used his toolkit to sideload a rom through twrp.
cortem said:
for my recovery, I have TWRP 2.5.0.0
I'll check my drivers just in case.
For my computer OS, I have windows 7 x64
Click to expand...
Click to collapse
I hope you are giving enough time for the device to be recognized.
BTW TWRP has been updated to 2.6
Sent from my GT-I9300 using xda premium
Hello,
A long time ago my brother has done something more stupid – had made root in Sony Xperia Z2 with TWRP, using the latest version of Sirius. As he has bought his new mobile phone, he has given me his old mobile phone, but he was not interested in formatting, de-rooting or fixing the bug of AudioFX, then I decided to work on my own. I made a lot of researches about how to fix the bug of AudioFX, so no luck.
As I wanted to de-root, I had to use my friend and sister's computers with Windows, using Kingo Root, because I am a Linux user, but no luck.
Then I downloaded the original and de-rooted image from TWRP, booted into TWRP mode, and flashed that image into Recovery. After, I could not boot any more. I tried to press power and Volume - and Volume +, but I could not boot either. I plugged the mobile phone into my laptop with Linux, but it was not recognised.
I read the following topics of XDA Developers, trying to train myself, but no luck:
1. Problem with TWRP 3.0.2 and encryption to solve boot loop
2.. [Q] Flashtool tool failed after amss_fsg.sin, can't flash phone
3. Downgrade to KitKat?
4. Unknown firmware, no boot, I can't flash
5. I can not flash!
6. Boot loop after flashing any ROM
7. To flash the recover Rebooting into TWRP recovery ... adb is not recognized
gusbemacbe said:
Hello,
A long time ago my brother has done something more stupid – had made root in Sony Xperia Z2 with TWRP, using the latest version of Sirius. As he has bought his new mobile phone, he has given me his old mobile phone, but he was not interested in formatting, de-rooting or fixing the bug of AudioFX, then I decided to work on my own. I made a lot of researches about how to fix the bug of AudioFX, so no luck.
As I wanted to de-root, I had to use my friend and sister's computers with Windows, using Kingo Root, because I am a Linux user, but no luck.
Then I downloaded the original and de-rooted image from TWRP, booted into TWRP mode, and flashed that image into Recovery. After, I could not boot any more. I tried to press power and Volume - and Volume +, but I could not boot either. I plugged the mobile phone into my laptop with Linux, but it was not recognised.
I read the following topics of XDA Developers, trying to train myself, but no luck:
1. Problem with TWRP 3.0.2 and encryption to solve boot loop
2.. [Q] Flashtool tool failed after amss_fsg.sin, can't flash phone
3. Downgrade to KitKat?
4. Unknown firmware, no boot, I can't flash
5. I can not flash!
6. Boot loop after flashing any ROM
7. To flash the recover Rebooting into TWRP recovery ... adb is not recognized
Click to expand...
Click to collapse
Sounds like you just soft bricked your device. ?
As far as i know it's easily fixable.
I might be able to help you out with few more info. ✌
Was it a 3G one or a LTE one ?
What rom were you on ?
A custom one or stock one ?
And what exactly do you want to achieve ? A stock rom with no root ? ?
In answer to Minato
Hello
~ Minato ~ said:
Sounds like you just soft bricked your device.
Was it a 3G one or a LTE one ?
Click to expand...
Click to collapse
It was a 3G.
~ Minato ~ said:
Sounds like you just soft bricked your device.
What rom were you on ?
Click to expand...
Click to collapse
It is custom. Android 8.1 TWRP Sirius with root.
~ Minato ~ said:
Sounds like you just soft bricked your device.
And what exactly do you want to achieve ? A stock rom with no root ? ?
Click to expand...
Click to collapse
An original ROM without root. I know a de-rooted and rooted Android 7 and 8 cause AudioFX bugs.
Can You still boot into twrp ?
If so did you try flashing a stock rom via a zip ?
Or you can use the fastboot but i won't be much of a help unless you have a windows pc ,i'm not familiar with Linux ?
In answer to Minato
~ Minato ~ said:
Can You still boot into twrp?
Click to expand...
Click to collapse
No
~ Minato ~ said:
Or you can use the fastboot but i won't be much of a help unless you have a windows pc, i'm not familiar with Linux.
Click to expand...
Click to collapse
As I can not boot into TWRP, it is impossible to use FastBoot, using Windows. I did it once.
gusbemacbe said:
No
As I can not boot into TWRP, it is impossible to use FastBoot, using Windows. I did it once.
Click to expand...
Click to collapse
Did you install the fastboot unsigned drivers as + ADB ?
Whole process should be something like this
Disable windows driver signature enforcement.
[URL="https://www.howtogeek.com/167723/how...igned-drivers/"][/URL]
Restart your pc or laptop.
Install ADB.
https://drive.google.com/open?id=0B0MKgCbUM0itSUhpUklCTFpzWkE&authuser=0
Install flashtool-0.9.18.6 with all the drivers.
(For some reason this is the most compatible one for Xperia Z2)
Then try flash twrp recovery using the flashtool. ✌