Hey,
I just fixed my screen for my z2 , dropped it today in the am answering the alarm and the phone dropped about 1 1/2 foot. The screen was fine for a bit then slowly faded to black. I cant see anything on the screen but i can unlock my phone and swipe and click etc . Any ideas on what may be the problem . I have a feeling that I'll have to get a need LCD screen but living on an island that doesnt carry your phone and having to ship the parts down takes about 1 -2 months i really don't want to wait. If i have to i will . Any help???
Related
Hellow everybody! 4 days ago I got the screen I ordered from ebay and I have a big problem! I installed the screen on the phone, and the phone was booting up, the touch screen worked I could sense the lock screen when I touched it but nothing! Also the phone was burning! after noumerous tries , the screen finally worked the next day! But one day after , it had the same problem!Now the screen is black since two days ago! Any help! I tried repairing with pc companion, but the screen still remains black!!
Since you installed it yourself, you maybe made a mistake during install, something wrong got connected or something.
You said, that phone heated up. Some connections could have melted or even some chips.
xperia mini pro
The phone worked for a day before repairing. And it didnt worked for two days berfore repair, after it had worked!!
Does it work now or not?
Yes it works , the touch screen works i can feel it by sliding the lock button.
But it remains black, i heard sound about the battery. so the phone works but the screen remains black.
Seems like connection issue between mainboard and the screen. You mentioned getting warm - could have been too hot for the connections.
Sent from my WT19i using xda premium
No I've trying installing the screen many times , but the heat was coming from a single part of the motherboard , i opened the phoned and touched it! It was burnig hot! Now there is no heat , the phone boots up, i can sense the lock sliding when I move it (vibration) but i cant see anything!!! It worked for day perfect! The first morning , heated for some time , but it work after ten minutes for a whole day with no problem! the next day i went to the cafe of the village and connected to the internet by wi-fi connection, when I left, the problem started again ! And the phone is working , as I mentioned before, but the screen isn't viewing anything!
Greetings XDA'ers, i have a Galaxy S II (international) and it's running stock ICS (XXWLPG) and the "problem" is that right before the lock screen comes up there is some screen flickering, black and white lines flickers vertically across the screen in about half a second before the lockscreen comes up. Its very hard to see this. But its easy to see it in dark rooms, like cinemas and such.
I have already returned the phone to where i bought it, the first time they changed the front LCD panel. and 2. time they didn't fix anything. And here in Norway the third time can get my money back for the phone if the same problem exists for 3 times. And if i do that then i can get the money back. And buy a S III ))
But anyway is this normal, they said they discovered the problem when i send it in the first time. and its still happening. so is this happening to you guys??
-Thanks for your helpfulness
Anyone???
I've not seen it, and you may need to wait longer than 2 hours to get a response from someone who has. This is a forum, not your personal instant messaging support client.
no it's not normal, pretty obvious
HI everyone My Xperia Mini Pro worked just fine, then one day the screen remained black after unlocking it... it still worked, i could feel the touch and vibrations, i could basicly do everything just that i wasn't able to see it. After some shaking, pressing, sliding the keyboard out, it came back to its normal state, but would go black again if i pressed it hard and hold...Now the screen is always black. I hadn't really dropped it, it wasn't exposed to high temperatures, it just happened......i took it to some service centers and they have changed the flex cable a few times but didn't work..they assumed it was a hardware issue.....My warranty's long out.....WHAT SHOULD I DO???...Is there a chance that a screen change might help it and what would it cost me? please help
Toowoomba said:
HI everyone My Xperia Mini Pro worked just fine, then one day the screen remained black after unlocking it... it still worked, i could feel the touch and vibrations, i could basicly do everything just that i wasn't able to see it. After some shaking, pressing, sliding the keyboard out, it came back to its normal state, but would go black again if i pressed it hard and hold...Now the screen is always black. I hadn't really dropped it, it wasn't exposed to high temperatures, it just happened......i took it to some service centers and they have changed the flex cable a few times but didn't work..they assumed it was a hardware issue.....My warranty's long out.....WHAT SHOULD I DO???...Is there a chance that a screen change might help it and what would it cost me? please help
Click to expand...
Click to collapse
You have to replace the screen of course . Not very expensive i think .
Toowoomba said:
HI everyone My Xperia Mini Pro worked just fine, then one day the screen remained black after unlocking it... it still worked, i could feel the touch and vibrations, i could basicly do everything just that i wasn't able to see it. After some shaking, pressing, sliding the keyboard out, it came back to its normal state, but would go black again if i pressed it hard and hold...Now the screen is always black. I hadn't really dropped it, it wasn't exposed to high temperatures, it just happened......i took it to some service centers and they have changed the flex cable a few times but didn't work..they assumed it was a hardware issue.....My warranty's long out.....WHAT SHOULD I DO???...Is there a chance that a screen change might help it and what would it cost me? please help
Click to expand...
Click to collapse
My friend broke his XMP screen bro, and in the service center they charged it too heavy such that he can buy an another device
try flashing stock ics just to check if it is software problem else you have to bear expenses if you cant miss such a good device
you can buy cheap screen screen for your device on some asian web sites and mabe from ebay. if you need links, just tell me...
mutlu_live said:
you can buy cheap screen screen for your device on some asian web sites and mabe from ebay. if you need links, just tell me...
Click to expand...
Click to collapse
I need links
So I have an S6 edge stock nonrooted 0x0 7.0 and i sometimes have a problem that concernes me
So I leave my phone for a few hours and press home to wake and see my screen divided in 4 parts.
2 top parts are my screen but with colors mixed and fu**ed up hue and all
2 bottom parts are like a broken tv signal snow thingy both divided
I did a screenshot as a proof but after i saw that ss was normal as every else so that was hardware not software problem
Touch work but im not sure where but it works
To fix it I just lock/unlock my phone and its back to normal
Heres a quick sketch I did in PS in attachments
Dino
Last week I've got this problem too. I thought I f**cked up something with my hands when my phone was in my pocket, but after your screenshot I think I was wrong. :laugh:
The only solution was to restart the phone, but it was tricky because the touch sceeen wasn't working properly due to the 4-way sliced screen.
If anyone knows what this is, please tell us. :laugh:
Hi guys,
when my phone is in charge at 100%, after some minutes it start to flickering when there is at least an orizontal black line and a white part, for example if there are 2 notifications there is an orizontal black line that separates the two notifications, right? The white part of the notification start to flicker. I tried to hard reset and nothing changed, and also got my display replaced and nothing changed (huawei customer service said they will replace the mb, but idk if this will solve my issue).
Anyone have this issue or it's really a faulty mb ? I tried searching online but it seems that no one have this problem.
I'll upload later a video that will show my issue...
Have you dropped the phone? Even from a small height it could cause problems.
My old p10 plus fell out of trouser pocket and hit the inside of door panel but was enough to cause screen flicker.
I had a hairline crack in digitiser/screen.
It only showed when screen brightness was on low or if phone was cold.
Got the screen replaced and was ok after.
zolaisugly said:
Have you dropped the phone? Even from a small height it could cause problems.
My old p10 plus fell out of trouser pocket and hit the inside of door panel but was enough to cause screen flicker.
I had a hairline crack in digitiser/screen.
It only showed when screen brightness was on low or if phone was cold.
Got the screen replaced and was ok after.
Click to expand...
Click to collapse
I dropped my phone only 1 or 2 times and always with protection, but even after the display replacement the problem didn't solve. It only flicker when it's in charge and already at 100% and when I unplug the charger, it stop. I noticed this problem only after I got my display replaced for the gluegate... but even after a second replacement nothing changed. I hope after the mb replace, my phone stops to flicker.
I have the same flickering problem with my Mate 20 Pro and have never dropped my beloved smartphone. For as of right now, the current (.232) update may have resolved the issue but it's only been a day since the patch. I will see how it goes.
edit: nope, even after the (9.0.0.232) software update, the flickering issue still remains as the original poster has described.