Hello all.
I would like to re-partition my GT-P7500 to create system partition of 1 or 2 GB size.
Reason for it - system partition is quite full even after full wipe and just necessary apps install. Especially since my migration on to Android 5.1.1 Lollipop (aosp-5.1.1-p4-20150729)
Is flashing with Odin + customized pit file the only way to do it?
Who could create pit file with, let's say 2GB system partition?
I really don't mind having smaller data area, but want to avoid space issues in system.
My partitions now, after full wipe/basic install:
Cache:
total - 440.95MB
used - 7.5MB
Efs:
total - 11.80MB
used - 8.14MB
Data:
total - 12715.62MB
used - 1862.17MB
System:
total - 568.89MB
used - 490.57MB (86% !!!)
Thank you and have a nice day.
No one knows? Really?
andrusha45 said:
Hello all.
I would like to re-partition my GT-P7500 to create system partition of 1 or 2 GB size.
Reason for it - system partition is quite full even after full wipe and just necessary apps install. Especially since my migration on to Android 5.1.1 Lollipop (aosp-5.1.1-p4-20150729)
Is flashing with Odin + customized pit file the only way to do it?
Who could create pit file with, let's say 2GB system partition?
I really don't mind having smaller data area, but want to avoid space issues in system.
My partitions now, after full wipe/basic install:
Cache:
total - 440.95MB
used - 7.5MB
Efs:
total - 11.80MB
used - 8.14MB
Data:
total - 12715.62MB
used - 1862.17MB
System:
total - 568.89MB
used - 490.57MB (86% !!!)
Thank you and have a nice day.
Click to expand...
Click to collapse
It's not needed to increase the system partition. I believe it would do more harm than good anyway. That partition is only used for pre installed system apps anyway.
Thank you very much!
I'll stop to worry about space on System partition
how to format GT-N8010 Corrupted Partition
My Samsung Tab GT-N8010 isnt turning ON and flashing the screen just It can went to Downloading Mode
Try Install new ROM on oddin 3.10.7 but get this error
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
rehansonu said:
My Samsung Tab GT-N8010 isnt turning ON and flashing the screen just It can went to Downloading Mode
Try Install new ROM on oddin 3.10.7 but get this error
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Binary Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1100)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004>
<ID:0/004> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
I hope you are not trying to flash a ROM from this forum because you have a galaxy note tablet an we all have an ancient gt-p7510 or GT-P7500. The roms in this forum will totally screw your tablet up.
I have PIT issue
I downloaded Roms from Samsung website
I just have issue and I have some knowledge about Android Flashing
Thank you by the way
rehansonu said:
I have PIT issue
I downloaded Roms from Samsung website
I just have issue and I have some knowledge about Android Flashing
Thank you by the way
Click to expand...
Click to collapse
If you need a PIT file you might have better luck in the correct forum. This is not the forum for your type of tablet.
Olivier V said:
If you need a PIT file you might have better luck in the correct forum. This is not the forum for your type of tablet.
Click to expand...
Click to collapse
I need solution... I have PIT files but It doesn't work
I just want a better and working solution
Related
HI,
I have Samsung S3 i tried to upgrade it to the latest firmware via Odin and while it was in processing my laptop froze so i restarted it and now when i get my phone into download mode i get those information:
Product name:
Custom Binary Download: NO
Current Binary: Samsung Official
System Status: Custom
as u can see the product name is "empty"
I really need your help! please...
Thanks
Have you tried to reflash with odin?
Sent from my GT-I9300 using Tapatalk 2
The main thing is you can get into download mode still, like previous post said reflash on a reliable laptop
Reflash with odin. If still problem, remove/replace. battery and Reflash. I think it ll work...
Sent from my GT-I9300 using Tapatalk 2
Thanks alot for your help i will try now and give u the results...
still the same:crying::crying::crying:
this is what i get
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Start odin, put your rom on pda, leave everything unchanged, make sure that repartition button is not enabled, start your phone in download mode, and wait until you see in odin message "added" , than click start. I wish you luck.
Sent from my GT-I9300 using Tapatalk 2
delta1987 said:
still the same:crying::crying::crying:
this is what i get
<ID:0/006> Initialzation..
<ID:0/006> Set PIT file..
<ID:0/006> DO NOT TURN OFF TARGET!!
<ID:0/006>
<ID:0/006> Re-Partition operation failed.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
<ID:0/006> Removed!!
Click to expand...
Click to collapse
how you flash with odin?
please see this
http://forum.xda-developers.com/showthread.php?t=1671969
re-partition box should be empty and try changing usb port. do not use usb 3.0 port if you have. good luck.
ok so i tried it with Re-partition checked off and i got this
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXBLFB_I9300OJVBLF3_I9300XXLFB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
I'm a bit of a Noob but here's what I would try - go to sammobile.com and find the latest official ROM for your phone/area. Download it to laptop. Start Odin. Put phone into Download mode then connect it. Click PDA and find the download file and flash it.
The official file should have all you need, but if you did this previous with PIT clicked you will need to ask someone more experienced than me - I haven't had any experience with that.
Another thing you might try is DL Revolution ROM (search for ARHD 9) and follow the Superwipe instructions to get rid of all the previous possible crap. I noticed when I used it there was all kinds of format-type stuff happening as the ROM installed.
If flashing with repartition failed after first try and now your nand is improperly partitioned or not partitioned at all, than you must now thick repartition while flashing by Odin because in other case it will not even start nand write.
But to make it properly you need Rom with separate parts (3 file firmware: PDA, PHONE, CSC) and proper .pit file for mapping new partition structure to flash it.
I can give you a link for such firmware but only for XEO region. If you need another one you must find it yourself.
Rom:
https://hotfile.com/dl/158814567/30ec3bc/GT-I9300_XEO_I9300XXALEF_I9300OXFALEA_I9300XXLEF.rar.html
Proper pit for above firmware:
https://hotfile.com/dl/162097667/e5b3f90/mx.zip.html
Flash with those probably will be successful, but if your nand partition information was erased than there is a risk of data loss on efs partition. But this will be your future problem.
i9.0.1.3k galaxy imperator
I think op need to use a proper pit file along with some stock odin rom to resolve this issue
《spilled from dragon jellybean rom》
And run ODIN as administrator.
My first NAND write failed win W7.
I retried it it worked (but as an Admin)
I still have the same problem even when i run odin as an administrator
still got that pit partition error!!
delta1987 said:
ok so i tried it with Re-partition checked off and i got this
<ID:0/006> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXBLFB_I9300OJVBLF3_I9300XXLFB_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/006> Odin v.3 engine (ID:6)..
<ID:0/006> File analysis..
<ID:0/006> SetupConnection..
<ID:0/006> Initialzation..
<ID:0/006> Get PIT for mapping..
<ID:0/006>
<ID:0/006> There is no PIT partition.
<ID:0/006> Added!!
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
you sir have corrupted the PIT mapping...now I believe you will have to flash the 3 file method..get the correct pit file.. I believe mx.pit is the latest...check repartition....
PM SirKunon..he is more experienced in these things..
And never check Repartition again..
Hello, I'd be grateful for some assistance. This morning my s3 was in my pocket and felt really warm. I pulled it out and it was stuck on the boot logo. I'm assuming it had been on that for a while which is why it heated up.
Now, the phone doesn't boot up. I can get into download mode but not recovery.
I did have the Siyah Kernel installed as well as a JB rom.
I have downloaded the latest firmware image for my region UK - (I9300XXEMB5_I9300OXAEMB5_BTU) and tried installing but have had no luck. Below is the message I get. Please help.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXEMB5_I9300OXAEMB5_996085_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
miahmad said:
Hello, I'd be grateful for some assistance. This morning my s3 was in my pocket and felt really warm. I pulled it out and it was stuck on the boot logo. I'm assuming it had been on that for a while which is why it heated up.
Now, the phone doesn't boot up. I can get into download mode but not recovery.
I did have the Siyah Kernel installed as well as a JB rom.
I have downloaded the latest firmware image for my region UK - (I9300XXEMB5_I9300OXAEMB5_BTU) and tried installing but have had no luck. Below is the message I get. Please help.
<ID:0/003> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> KIES_HOME_I9300XXEMB5_I9300OXAEMB5_996085_REV00_user_low_ship.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Get PIT for mapping..
<ID:0/003>
<ID:0/003> There is no PIT partition.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
Have you tried with another usb port and are you using stock samsung usb cable?
Your partition structure of the internal storage card is corrupt, the phone is soft bricked. You can usually format and recover if you have backups, particularly of the efs folder.
If you don't then there are a few solutions here on the forum you can try, otherwise it's a Samsung repair.
boomboomer said:
Your partition structure of the internal storage card is corrupt, the phone is soft bricked. You can usually format and recover if you have backups, particularly of the efs folder.
If you don't then there are a few solutions here on the forum you can try, otherwise it's a Samsung repair.
Click to expand...
Click to collapse
Hello, thanks for your reply. I don't have a backup. Would you please point me in the right direction? I'm not sure what I need to do?? where would I get the recovery??(Is that the bootloader?Kernel?Rom?)
Search and read here in Q&A, without a backup of your efs it is less likely to succeed. Otherwise return to Samsung for repair.
boomboomer said:
Search and read here in Q&A, without a backup of your efs it is less likely to succeed. Otherwise return to Samsung for repair.
Click to expand...
Click to collapse
From what I can make out I need to reformat the internal storage. To do this I need the correct pit file. I can't find it on samfirmware.com.
miahmad said:
From what I can make out I need to reformat the internal storage. To do this I need the correct pit file. I can't find it on samfirmware.com.
Click to expand...
Click to collapse
i dont know if this will work ... but try the resurrection rom!
I can't bet into recovery.installing from Odin also gives error.
flash the correct pit file, use search, it's been posted
Glebun said:
flash the correct pit file, use search, it's been posted
Click to expand...
Click to collapse
I have attached the Pit file I have used. No luck. It does nothing, I have left it for ages.
<ID:0/003> Added!!
<ID:0/003> Odin v.3 engine (ID:3)..
<ID:0/003> File analysis..
<ID:0/003> SetupConnection..
<ID:0/003> Initialzation..
<ID:0/003> Set PIT file..
<ID:0/003> DO NOT TURN OFF TARGET!!
<ID:0/003> Get PIT for mapping..
Service centre then but their is a big queue judged by todays bricked phone posts .
jje
Hi
I am very new to this forum.Recently I bought a not 2 gt n7100 from ebay.I tried to upgrade it using omnirom 4.4.2 nightly and gaps.I have downloaded the cwm ,ROM and gaps into the SD card.System updated and m stuck in the startup screen with the Samsung logo.Unfortunately I didn't create the backup.Now when I tried to root the phone via Odin it shows snoot.bin ;nand write start;complete operation failed.m worried have I crashed my MB.is there any way to fix it.help will be appreciated. Thanks
dnaha said:
Hi
I am very new to this forum.Recently I bought a not 2 gt n7100 from ebay.I tried to upgrade it using omnirom 4.4.2 nightly and gaps.I have downloaded the cwm ,ROM and gaps into the SD card.System updated and m stuck in the startup screen with the Samsung logo.Unfortunately I didn't create the backup.Now when I tried to root the phone via Odin it shows snoot.bin ;nand write start;complete operation failed.m worried have I crashed my MB.is there any way to fix it.help will be appreciated. Thanks
Click to expand...
Click to collapse
Higher chances your phone can easily be recovered
The only problem is if you havent backed up ur data u could loose it.
Im not sure if u can back it up at this stage unless its on the external memeory card.
Method 1:
- Copy over the flashable OMNI ROM Zip file to an external memory card then insert in phone
- remove battery,
- re-insert battery,
- hold MENU KEY + VOLUME UP + POWER KEY for like 3 - 5 seconds then release
- The phone will enter recovery mode
NOW if it happens to be CWM recovery (u just flashed) and not the Original Stock recovery
then you could do a DATA WIPE / WIPE DATA normally deletes the apps and not personal files but I believe OMNI ROM uses a different file system compared to original Samsung stock ROMS so if your flashing was successful and ur pohone is just suffering from a bootloop then ur personal data (pictures, videos , personal files) may have already already been have wiped. eboot and u could be good to go with OMNI ROM
OR u could use the same recovery to flash the OMNI ROM Zip file on the external SD Card... (google or search on XDA how to flash a ROM using CWM Recovery)
Method 2: will set everything as how it was before if above fails or is complicated
My advice Flash a samsung STOCK ROM using Odin (u need to google or search on XDA on how to flash the phone with Odin ///pretty easy though)
Also download a samsung stock ROM version which was currently on your phone when you bought the phone not any later versions unless your phone was updated via OTA then download that version just to avoid some possibilites of corrupting the EFS..you can download most samsung stock ROMs from here
Your phone should be restored to stock and should work fine. If u still need to use Omni ROM or any other ROM (in most cases) then u would need to ROOT ur stock rom , flash CWM and flash your ROM. but just after rooting its always a good idea to backup ur EFS Folder/EFS Partition (These two links may help you link 1 link 2)
Note: if you dont tick REPARTITION while flashing with Odin chances are your data on the internal memory could be available and not erased just a heads up
Thanks...
But it failed.I have used odin 3.09 the rom which i have downloaded is N7100XXUENB1_N7100OJKENB1_N7100JKUENA1_HOME.tar.md5 when i try to flash using odin following msg displays
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUENB1_N7100OJKENB1_N7100JKUENA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
is there any fix for this???
dnaha said:
Thanks...
But it failed.I have used odin 3.09 the rom which i have downloaded is N7100XXUENB1_N7100OJKENB1_N7100JKUENA1_HOME.tar.md5 when i try to flash using odin following msg displays
<ID:0/009> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> N7100XXUENB1_N7100OJKENB1_N7100JKUENA1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/009> Odin v.3 engine (ID:9)..
<ID:0/009> File analysis..
<ID:0/009> SetupConnection..
<ID:0/009> Initialzation..
<ID:0/009> Get PIT for mapping..
<ID:0/009> Firmware update start..
<ID:0/009> SingleDownload.
<ID:0/009> sboot.bin
<ID:0/009> NAND Write Start!!
<ID:0/009> FAIL!
<ID:0/009>
<ID:0/009> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
is there any fix for this???
Click to expand...
Click to collapse
Ok i used to have a similar if not the same problem. Are u in download mode when you perform the flash? Try flashing with an Older Odin version1.85 attached here it helped me numerous times .. the newer ones never worked for me. also send me screenshots before & after you flash you phone of odin
Hello guys
First sorry for my english ;C
I have big problem becouse i cant flash my ace. Odin displays error. i try using 3 roms 2 for 5839i and 1 for 5830i.-1 file rom. Every time odin displays this error:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> S5830iXXLK3_S5830iDBTLK1_S5830iXXLK1_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> sbl.bin
<ID:0/004> NAND Write Start!!
<ID:0/004> BcmCP.img
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Maybe have some advice?
PLS help me
Edit:
My ace is alive This is way is good and rom works !
Hi @kozak245 ; writing failure procedure at the end of the log might be caused by corrupt image file / pit file and other things . I would suggest you do whatever i instructed here for this fellow to get to the clean state and then decide on whether you flash your preference s5839i later from sammobile or stay on s5830i split version . <btw disable/uninstall any kies app , if installed on your system >
EFS partition back up/ data backup/Nandroid backup is recommended , before the process.
Ok thanks, i do all full wipe and cache partition
And i have 1 question: can you recommended stable and fast rom for this model? Maybe stock 2.3.6 is the best?
Please for some guides (cwm,root and rom )
kozak245 said:
Ok thanks, i do all full wipe and cache partition
And i have 1 question: can you recommended stable and fast rom for this model? Maybe stock 2.3.6 is the best?
Please for some guides (cwm,root and rom )
Click to expand...
Click to collapse
Root for SGA s5830i you can find here:
http://forum.xda-developers.com/sitesearch.php?q=ROOT-S5830C-i-M
CWR for SGA s5830i you can find here:
http://forum.xda-developers.com/sitesearch.php?q=ClockWorkRec5830i
Galaxy Toolbox for EFS backup partition you can find here:
https://play.google.com/store/apps/details?id=com.doky.sgtoolbox&hl=en
For ROM's you should search.
Good luck.
kozak245 said:
Ok thanks, i do all full wipe and cache partition
And i have 1 question: can you recommended stable and fast rom for this model? Maybe stock 2.3.6 is the best?
Please for some guides (cwm,root and rom )
Click to expand...
Click to collapse
2nd part of the question was addressed by some fellow and for the rom we are discouraged @ XDA to promote for Roms , just observe this link mate < categorized for your need neatly >
Also all you need to acquire was linked inside my first post; read all of it carefully to revert back correctly .
I promoted one ROM in post 4, because at the beginning no one told me which ROM is ok and which it's not.
And I made a big mistake, that I thought I had terminated my phone.
OK.
I deleted the promote of the post 4.
Suddenly phone freezed and restarted and asked me to reset to remove encryption
then when i tried formatting using TWRP it displays the following
Unable to open '' to wipe crypto key
unable to format to remove encryption
Updating partition details......
Failed to mount '/efs' (Invalid Argument)'
Failed to mount '/cache' (Invalid Argument)'
Failed to mount '/System' (Invalid Argument)'
Failed to mount '/data' (Invalid Argument)'
Failed to mount '/preload' (Invalid Argument)'
...done
unable to mount storage
Push an official cwm recovery via odin. If no joy flash back to stock and start over.
Sent from my HTC One M9 using Tapatalk
please let me know how to push CWM from odin . Can you please assist me here
shivadow said:
Push an official cwm recovery via odin. If no joy flash back to stock and start over.
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
This was the result when i tried flashing CWM
<ID:0/015> Added!!
<ID:0/015> Odin engine v(ID:3.1100)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Erase...
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
shivadow said:
Push an official cwm recovery via odin. If no joy flash back to stock and start over.
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
Flash recovery twrp. 2.8.7.3 via heimdall. Other way flash back to stock rom with i9300 pit file via odin.. make sure you choose the right pit for i9300 16gb or i9300 32gb.
Id blame twrp. I had nothing but issues with it. Flash back to stock and start over. It's now your only option.
There is a chance you've had sds (sudden death syndrome) and the nand could be corrupt. You fix it with a pit file via odin but ONLY as a last resort. Flashing pit files is a final throw before pronouncing it's death.
The stuff i use : https://drive.google.com/folder/d/0B4vTiHTBB629ZW5vQndpbjFnblk/edit
You will NOT find a pit file in there as i don't support pit flashing, because it is final. It either works or it doesn't. You will have to find one yourself if you need one.
Sent from my HTC One M9 using Tapatalk
Help please
Hi guys i Got the International version of Samsung galaxy S3 GT-I9300 and something went really Wrong
So i tried every posible way to Unbrick it With every single ODin every recovery tried a 3 different stock Roms but always failed
In Odin I got this Error
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNJ2_I9300MSTGNJ1_I9300XXUGNA8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
And also tried do do a Factory reset Through Recovery and apperantly Failed as well i got the screenshot atached bellow with the errors
So please if everyone have a solution for this particular Issue please any help is welcomed Thanks
emptywordsss said:
Hi guys i Got the International version of Samsung galaxy S3 GT-I9300 and something went really Wrong
So i tried every posible way to Unbrick it With every single ODin every recovery tried a 3 different stock Roms but always failed
In Odin I got this Error
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> I9300XXUGNJ2_I9300MSTGNJ1_I9300XXUGNA8_HOME.tar.md5 is valid.
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin v.3 engine (ID:4)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> boot.img
<ID:0/004> NAND Write Start!!
<ID:0/004> FAIL!
<OSM> All threads completed. (succeed 0 / failed 1)
And also tried do do a Factory reset Through Recovery and apperantly Failed as well i got the screenshot atached bellow with the errors
So please if everyone have a solution for this particular Issue please any help is welcomed Thanks
Click to expand...
Click to collapse
Format /cache through recovery (philz). Mounts and Storage --> Format /Cache.
shivadow said:
Id blame twrp. I had nothing but issues with it. Flash back to stock and start over. It's now your only option.
There is a chance you've had sds (sudden death syndrome) and the nand could be corrupt. You fix it with a pit file via odin but ONLY as a last resort. Flashing pit files is a final throw before pronouncing it's death.
The stuff i use : https://drive.google.com/folder/d/0B4vTiHTBB629ZW5vQndpbjFnblk/edit
You will NOT find a pit file in there as i don't support pit flashing, because it is final. It either works or it doesn't. You will have to find one yourself if you need one.
Sent from my HTC One M9 using Tapatalk
Click to expand...
Click to collapse
I tried flashing with Odin and Heimdall. All i get at the end is failed. Odin fails at NAND and heimdall runs till 100% for all whatever i choose. Suggest me any procedure on how to check if my internal storage is intact and can be retrieved. So that i can atleast sleep peacefully.
reinzl said:
Flash recovery twrp. 2.8.7.3 via heimdall. Other way flash back to stock rom with i9300 pit file via odin.. make sure you choose the right pit for i9300 16gb or i9300 32gb.
Click to expand...
Click to collapse
This was the result when i tried flashing CWM
<ID:0/015> Added!!
<ID:0/015> Odin engine v(ID:3.1100)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Erase...
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
RajeshVV said:
This was the result when i tried flashing CWM
<ID:0/015> Added!!
<ID:0/015> Odin engine v(ID:3.1100)..
<ID:0/015> File analysis..
<ID:0/015> SetupConnection..
<ID:0/015> Initialzation..
<ID:0/015> Erase...
<ID:0/015>
<ID:0/015> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Click to expand...
Click to collapse
For 16 GB of GT-I9300 only. Please don't try it to other devices.
Reverting To Stock Partition Table GT-I9300 16GB
Sent from my GT-I9300 using Tapatalk
reinzl said:
For 16 GB of GT-I9300 only. Please don't try it to other devices.
Reverting To Stock Partition Table GT-I9300 16GB
Sent from my GT-I9300 using Tapatalk
Click to expand...
Click to collapse
Tried flashing PIT and was unsuccessful. Not sure if the data partition is intact and if so how to know its presence and the status of it.
Anyone solve this problem? I'm using N7100 and get this problem too
Tried to flash PIT with new odin version always noti "failed",
with 3.0.7, 3.0.9, odin freeze at "Get PIT for mapping..", I waited more than 30 minutes but nothing happen,
Tried to flash stock ROM but failed at "NAND Write Start!!"
Someone please help me fix this problem.
Are you using the original Samsung USB cable? Tried other USB cables and USB 2.0 ports?
oh, hi audit13,
Of course I used original Samsung USB cable, I changed some other cables, and USB ports(2.0, 3.0) to test, but nothing new.
I think no one can fix this problem, bring to cell store is the best choice
When flashing with Odin, which is the file that fails to flash? Maybe post the Odin log?
audit13 said:
When flashing with Odin, which is the file that fails to flash? Maybe post the Odin log?
Click to expand...
Click to collapse
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
<ID:0/004> Firmware update start..
<ID:0/004> SingleDownload.
<ID:0/004> sboot.bin
<ID:0/004> FAIL!
<ID:0/004>
<ID:0/004> Complete(Write) operation failed.
<OSM> All threads completed. (succeed 0 / failed 1)
Everytime it end with this failed.
If I flash only PIT, It will stop at
Code:
<ID:0/004> Added!!
<OSM> Enter CS for MD5..
<OSM> Check MD5.. Do not unplug the cable..
<OSM> Please wait..
<OSM> Checking MD5 finished Sucessfully..
<OSM> Leave CS..
<ID:0/004> Odin engine v(ID:3.1203)..
<ID:0/004> File analysis..
<ID:0/004> SetupConnection..
<ID:0/004> Initialzation..
<ID:0/004> Get PIT for mapping..
I waited for 1 hour but nothing change.
There shoot.bin file is not flashing because the memory is damaged, the ROM is not for the phone, the bootloader in the phone is newer than bootloader in the rom, or you need a different USB cable.
audit13 said:
There shoot.bin file is not flashing because the memory is damaged, the ROM is not for the phone, the bootloader in the phone is newer than bootloader in the rom, or you need a different USB cable.
Click to expand...
Click to collapse
"the bootloader in the phone is newer than bootloader in the rom"
Sorry, but how to know bootloader in the phone is newer than bootloader in the rom?
I flashed Roms with Android ver 4.4.4, 6.0.1, 7.1.1, and don't know much about bootloader, can you help me find my bootloader ver and find the way to resolve this problem. Thanks