Hello,
I have ported TWRP recovery to Samsung Galaxy A5 (SM-A500)
It's currently tested on European FU variant, but should work on other variants too that have Lollipop bootloader.
* How to flash via Odin:
1 ) Boot your device into download mode
2) Start Odin (I recommend 3.10.6), put the recovery package in AP tab - uncheck "auto reboot"
3) Flash (if it gives you error about md5 mismatch, make sure it is properly downloaded and remove the .md5)
NOTE: you can also extract the recovery.img from the package and flash any other way you want, for example, with an app called Flashify
* Download:
AndroidFileHost: https://www.androidfilehost.com/?w=files&flid=37329
* Credits:
TeamWin - for creating and working on this recovery
@erikcas - general TWRP advice
@mygalaxya - testing
@fonix232 - testing
* Source:
Device tree: https://github.com/MSM8916-Samsung/android_device_samsung_a5ultexx
Kernel: https://github.com/TheWhisp/android_kernel_samsung_msm8916-caf
TWRP: https://github.com/omnirom/android_bootable_recovery/tree/android-6.0
* Change log
24-04-2016 - twrp-3.0.2.0-24042016-a500-b2.img
* Fix decryption
NOTE: For it to work, you must cancel the initial password promt, then go to Mount options and mount system and firmware, after that click on "Decrypt data"
24-04-2016 - twrp-3.0.2.0-24042016-a500.img
* TWRP 3.0.2.0
* Adoptable storage support (untested)
06-02-2016 - twrp-3.0.0.0-06022016-a500.img
* TWRP 3.0.0.0
* Fix MTP
* Allow flashing recovery image
06-01-2016
* Fix some issues with ADB
* Material UI
* Built against OmniROM's android-6.0 branch
10-11-2015
* Fix time issue (make sure you adjust time zone if you have incorrect time)
* OTG support
20-08-2015 build 2
* Fix brightness slider
20-08-2015
* Remove option to reboot to boot loader (Samsung devices has download mode instead)
* Couple of other fixes
19-08-2015
* Initial build
Link says: "Access Denied" :/
Inviato dal mio SM-A500FU utilizzando Tapatalk
Sorry, wrong link. It's fixed now: https://www.androidfilehost.com/?w=files&flid=37329
The latest build is: twrp-2.8.7.0-a5ultexx-20082015-b2.tar.md5
When I reboot is always in recovery, it was not correct?
Inviato dal mio SM-A500FU utilizzando Tapatalk
What do you mean? I have no problems booting into system from recovery. However, I've had received a report that if you turn off and turn on the phone it will boot into recovery instead of system.
But there are no issue when rebooting.
Give me a step-by-step list of actions you perform, so I can try to reproduce the problem.
NOTE: If you have problems like that, boot into download mode, it will reset the recovery flag and you will be able to boot into system.
To start the system must switch from recovery. At each restart instead to boot the system starts the recovery. (Sorry for my english, but I am Italian).
Inviato dal mio SM-A500FU utilizzando Tapatalk
I cannot reproduce this issue. Reboot works correctly on my device.
Unofficial CyanogenMod 12.1 build is ready for SM-A500FU: http://forum.xda-developers.com/android/development/rom-cyanogenmod-12-1-samsung-galaxy-a5-t3208657
Not booting into the system once it goes into the recovery. SM-A500G Kitkat.
I guess you need to have stock lollipop flashed as base for this recovery to work
Sent from my SM-A500FU using XDA Free mobile app
@TheWhisp: you can make twrp support on kitkat?
ur recovery works fine on a500g
Sarath280 said:
ur recovery works fine on a500g
Click to expand...
Click to collapse
kitkat?
@tejav2s lollipop
Sarath280 said:
@tejav2s lollipop
Click to expand...
Click to collapse
Thanks for reporting
Problem persists
mikeloury said:
Thanks for reporting
Click to expand...
Click to collapse
Even after updating to Lollipop (deodexed ROM) reboot happens directly into recovery and cannot reboot into system from recovery. SM-A500G (Lollipop) with xposed framework installed. Please help.
By Lollipop I meant you need to have Lollipop firmware by Samsung (not a custom ROM based on L)
Works great on A500M, but if you use "reboot recovery" command in an terminal app, the device reboot directly into recovery and cannot reboot into system again.
PleaSe fix time error issue ( false time )
Thank you.
Related
http://forum.xda-developers.com/xpe.../recovery-twrp-3-0-0-touch-recovery-t3309938/
This is deprecated.
In this thread I'll share the .img files of the latest TWRP available for our device, so you can flash them with Rashr/PhilZ/Cyanogen recovery.
Disclaimer:
you are responsible for what you do. If your device stops working after you follow this guide, it's not my fault. However, as usual, if you do things in a correct way, you won't face any problems.
Requirements:
any ROM with any kernel
unlocked bootloader
Don't flash it if you have got a locked bootloader!
Features:
up-to-date source
flashable signed zip
f2fs support
Changelog:
TWRP 2.8.7.0_8
- other cleanups
- startup now is not slow! It just takes 3 - 4 seconds!
- Reboot bug is fixed - maybe
TWRP 2.8.7.0_7
- optimizations and cleanups
TWRP 2.8.7.0_6
- f2fs for /system is supported (this is for Temasek users)
TWRP 2.8.7.0_5
- f2fs support improved
- minor optimizations
- less overheating
TWRP 2.8.7.0_4
- attempt to fix issues with reboot option
TWRP 2.8.7.0_3
- signed flashable zip added
TWRP 2.8.7.0_2
- f2fs bugs fixed
- fixed overheating
How to install:
flash the zip through any recovery (even Cyanogen recovery!)
Download from Android File Host:
[url]https://www.androidfilehost.com/?fid=24052804347826443[/URL]
Stock FOTAKernel to remove any recovery (included this one): [url]http://forum.xda-developers.com/xperia-sp/general/stock-components-flashable-zips-t3184111[/URL]
Be sure to select the right variant of your device!
Thanks to:
@[NUT]
@antr34
@TechnoSparks
This work in miui v6
Thanks a lot for this quick update :thumbup:
Working fine on AICP's official nightlies with stock kernel.
The TITAN has landed. Hide your works from this critic! The official maintainer of the XSP Lollipop and M Hub.
Rashr was not working for me. I got it to work with this command on the terminal (with root):
Code:
su
dd if=/ext_card/twrp-2.8.7.0_huashan.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
Notice that you'd have to save the .img file on the proper directory prior to using the command.
You can find more details of my struggle here: http://forum.xda-developers.com/xpe...rnel-tangerine-kernel-v1-t3073297/page28#1379
Hope this helps someone with the same issue.
pilger said:
Rashr was not working for me. I got it to work with this command on the terminal (with root):
Code:
su
dd if=/ext_card/twrp-2.8.7.0_huashan.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
Notice that you'd have to save the .img file on the proper directory prior to using the command.
You can find more details of my struggle here: http://forum.xda-developers.com/xpe...rnel-tangerine-kernel-v1-t3073297/page28#1379
Hope this helps someone with the same issue.
Click to expand...
Click to collapse
I use it and i cant flash nothing
Guizão BR said:
I use it and i cant flash nothing
Click to expand...
Click to collapse
What is the output of the command? Does it throw you an error or anything?
@pilger i'm here, what to do next?
Here's a more detailed description of what I did in order for this to be flashed on my FOTAKernel:
Booted into default Cyanogen Recovery;
Wiped Dalvik and everything else I could in order to flash a new ROM;
Flashed the UNOFFICIAL CM from July 26th;
Flashed Pico Gapps (I guess it doesn't matter which Gapps you install, though);
Booted into system and set up everything (accounts, wi-fi, etc.);
DID NOT install Rashr;
Plugged my device to PC using USB;
Transfered the twrp-2.8.7.0_huashan.img to the root of the internal storage;
Unplugged the device from the computer;
Enabled Developer options on Settings (by tapping like crazy on the build number);
On the Developer options, I turned on Terminal Command, and root access to both ADB and apps;
Opened the terminal and entered "su" command to get root;
Allowed root and set it to remember its choice;
Entered up the command:
Code:
dd if=/ext_card/twrp-2.8.7.0_huashan.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
Rebooted on recovery mode;
TWRP 2.8.7.0 was functioning as expected.
pilger said:
Here's a more detailed description of what I did in order for this to be flashed on my FOTAKernel:
Booted into default Cyanogen Recovery;
Wiped Dalvik and everything else I could in order to flash a new ROM;
Flashed the UNOFFICIAL CM from July 26th;
Flashed Pico Gapps (I guess it doesn't matter which Gapps you install, though);
Booted into system and set up everything (accounts, wi-fi, etc.);
DID NOT install Rashr;
Plugged my device to PC using USB;
Transfered the twrp-2.8.7.0_huashan.img to the root of the internal storage;
Unplugged the device from the computer;
Enabled Developer options on Settings (by tapping like crazy on the build number);
On the Developer options, I turned on Terminal Command, and root access to both ADB and apps;
Opened the terminal and entered "su" command to get root;
Allowed root and set it to remember its choice;
Entered up the command:
Code:
dd if=/ext_card/twrp-2.8.7.0_huashan.img of=/dev/block/platform/msm_sdcc.1/by-name/FOTAKernel
Rebooted on recovery mode;
TWRP 2.8.7.0 was functioning as expected.
Click to expand...
Click to collapse
I've got TWRP now, one question though, if I flash the next CM nightly, it wouldn't be overwrote by the cyanogen recovery?
J73 said:
I've got TWRP now, one question though, if I flash the next CM nightly, it wouldn't be overwrote by the cyanogen recovery?
Click to expand...
Click to collapse
Glad you got it to work, mate! Flashing CM shouldn't overwrite the recovery. I guess that's the purpose of having the recovery on FOTA.
I'm not an expert though. But I've tested a couple of times myself and TWRP is there after every flash.
pilger said:
Glad you got it to work, mate! Flashing CM shouldn't overwrite the recovery. I guess that's the purpose of having the recovery on FOTA.
I'm not an expert though. But I've tested a couple of times myself and TWRP is there after every flash.
Click to expand...
Click to collapse
Thanks to you! All's well now, I'm so glad to have TWRP again thank you!
pilger said:
What is the output of the command? Does it throw you an error or anything?
Click to expand...
Click to collapse
Sorry i Forgot to edit the play, this have more time to flash
There's a bug with f2fs, it will be fixed tomorrow. Thanks to @Adrian DC for pointing this out.
Tomoms said:
There's a bug with f2fs, it will be fixed tomorrow. Thanks to @Adrian DC for pointing this out.
Click to expand...
Click to collapse
Can you tell me about that bug cause I'm using f2fs for cache,data and media that's formatted through your recovery
Sent from my Xperia SP using Tapatalk
kunal9007 said:
Can you tell me about that bug cause I'm using f2fs for cache,data and media that's formatted through your recovery
Sent from my Xperia SP using Tapatalk
Click to expand...
Click to collapse
Are you using Tangerine? This bug is not present in Tangerine's TWRP.
Tomoms said:
Are you using Tangerine? This bug is not present in Tangerine's TWRP.
Click to expand...
Click to collapse
I'm using tangerine but I've flashed this TWRP first, and this recovery has fotakernel so i geuss it can't be overwritten
Sent from my XT1033 using Tapatalk
kunal9007 said:
I'm using tangerine but I've flashed this TWRP first, and this recovery has fotakernel so i geuss it can't be overwritten
Sent from my XT1033 using Tapatalk
Click to expand...
Click to collapse
Well, strange. f2fs volumes couldn't be mounted.
Tangerine probably fixed the issue, same as my CM-12.1 boot image fixed the TWRP image.
The goal of the fix is to have F2FS working without the boot image flashed over TWRP to make clean installs.
Adrian DC said:
Tangerine probably fixed the issue, same as my CM-12.1 boot image fixed the TWRP image.
The goal of the fix is to have F2FS working without the boot image flashed over TWRP to make clean installs.
Click to expand...
Click to collapse
just realized that I didn't had tangerine installed i was on first build of official cm and then before flashing radium i formated to f2fs
Sent from my XT1033 using Tapatalk
---------- Post added at 09:00 PM ---------- Previous post was at 08:58 PM ----------
and i flashed tangerine after atleast 1 day use of stock kernel
Sent from my XT1033 using Tapatalk
Code:
#include
/*
* Your warranty is now void.
*
* I am not responsible for bricked devices, dead SD cards,
* thermonuclear war, or you getting fired because the alarm app failed. Please
* do some research if you have any concerns about features included in this ROM
* before flashing it! YOU are choosing to make these modifications, and if
* you point the finger at me for messing up your device, I will laugh at you.
*/
Warning
This recovery will TRIP your Knox Counter and your warranty will be void.
This recovery is only for Samsung Galaxy A700FD Qualcomm Snapdragon variant running 5.0.2 (lollipop).
Tested Safely on following devices.
Samsung Galaxy A700FD
Why TWRP ? Why not some rooted firmware which keeps warranty safe ?
TWRP is a custom recovery. It has many more functionality than stock recovery! if something goes wrong while flashing something you can always make a backup use this recovery which can be restored when things get messed. if mess is of large extend you can always flash stock firmware.
Why new TWRP Recovery ?
The older version which was released will not be compatible with cm structure due to mount points and hence this recovery will be supportable for all custom flashing.
Instructions
Follow the instructions carefully.
Step 1 :
Install Samsung Drivers and connect your device to PC. let it install drivers and if its updating let it update. your device drivers should be perfectly installed without a single failure.
Link to Samsung Drivers
Step 2 :
Download Odin 3 you can use 3.07 or 3.09
You can download Odin from here
Download the TWRP Recovery
Step 3:
Turn of your device and go to odin mode [ Vol down + power + home button (all at the same time) ] release it when you see Galaxy A7 Logo
Press vol up to confirm
Step 4:
Now that you are in Odin Mode connect your device via USB cable.
Now open Odin3 3.09 or 3.07 that you have downloaded.
If there is a pop-up like Installing ADB drivers let it get finished it usually updates.
Make sure the COM : xx (xx is usb port number it can be any number so dont worry about it,just verify COM is lit up)
Now select AP and browse to where you have .tar file and select it
Make Sure only Default Auto Reboot and F. Reset Time is ticked and nothing.verify twice only these 2 are ticked.
Untick Auto Reboot if you are installing recovery for first time!
Click Start and wait for the process to end. DO NOT Interrupt during this time.
Once it says PASS. BOOT INTO RECOVERY USING VOL UP + HOME + POWER BUTTON.
Done.
Credits:
TWRP Team for their awesome recovery.
@RVR for testing recovery!
XDA:DevDB Information
TeamWin Recovery Project, ROM for the Samsung Galaxy A Series
Contributors
jackeagle
ROM OS Version: 6.0.x Marshmallow
ROM Kernel: Linux 3.10.x
Version Information
Status: Stable
Current Stable Version: 3.0.2.0
Stable Release Date: 2016-03-07
Created 2016-03-07
Last Updated 2016-05-25
Downloads
TWRP Build 1
TWRP Build 2 (V3.0.0)
TWRP v3.0.2.0 (Build 3)
TWRP v3.0.2.0 (Build 4)
Changelog
Code:
27/06/2016
- Added Compatibility for Samsung Marshmallow Firmware Release
- Merged with Samsung Marshmallow kernel release
- TWRP upstream merge.
25/05/2016
- Fixed Recovery Loop Issues.
- Fixed MTP Media Transfer on Recovery.
- Added EFS Partition Backup Option
- Fixed Brightness Slider
- Updated TWRP to latest v3.0.2.0
07/03/2016
- Updated TWRP to v3.0.0
20/11/2015
- Initial Release
Reserved 2
I need a custom recovery for Galaxy A8 (A800F) please.
Thanks
How to root Galaxy A700FD and install a recovery running on lolipop 5.0.2.
Developers please go for Samsung Galaxy A7 A700FD ..
Sent from my SM-A700FD using Tapatalk
Nice keep posting about A700FD
Sent from my SM-A700FD using Tapatalk
TWRP Link is dead.
TWRP updated to v3.0.0.
Links are in OP.
Enjoy!
jackeagle said:
TWRP updated to v3.0.0.
Links are in OP.
Enjoy!
Click to expand...
Click to collapse
build 2 is invalid ,help
nukedanoob said:
build 2 is invalid ,help
Click to expand...
Click to collapse
Use this link: https://www.androidfilehost.com/?fid=24438995911970888
and what if I can't flash because of secure boot enabled?
(in download mode there is a line "Qualcomm Secureboot - Enabled (CSB)" and "Write Protection - Enabled". I think this is the cause).
what should I do? any help appreciated.
nevermind. it was a faulty cable.
lifehijack said:
Use this link: https://www.androidfilehost.com/?fid=24438995911970888
Click to expand...
Click to collapse
thanks
A7000 want to twrp 3.0.0too
来自我的 SM-A7000 上的 Tapatalk
lifehijack said:
Use this link: https://www.androidfilehost.com/?fid=24438995911970888
Click to expand...
Click to collapse
works fine,just rename the file
Qualcomm Secure Boot is enabled and trying to flash recovery gives this message on phone
secure check fail : recovery
Custom Binary(recovery) Blocked by A/L
Odin says Fail
Solved: Disabled Reactivation Lock in security settings
Phone booting into recovery each time when I reboot the phone. How to come out of recovery mode boot loop?
Can i use it on my a7000?
Hello jackeagle, I ask you to continue the CM13 E5 project, I enjoyed the rom! If I can help in any way! even a my donation and my friends for you to continue the rom!
Always get kernel not seandroid enforcing .... i cannot boot to the system i just installed... just a blank screen
. .
UPDATE 07/04/2016 - New TWRP recovery 3.0.2-1 - Download links just below. Flash recovery.img with flashify
Download twrp 3.0.2-0
A800I: http://hostracon.com/androidlover5842/files/Tested_recovery/a8hplte/
A800F: http://hostracon.com/androidlover5842/files/Tested_recovery/a8elte/
TWRP recovery 3.0.1-0 for the SM-A800I / SM-A800F
Method 1:
1. Download flashify app from playstore
2. Flash recovery.img with flashify (Phone needs to be rooted)
3. Reboot to recovery and enjoy !!
Method 2:
1. You will need to download and install Odin on your PC.
2. Once you have Odin installed, download the proper .tar file for your device from the download link below.
3. Power off your device. Turn on your device using the proper key combo to get into download mode and plug usb cable
4. Use the AP button to browse to and select the tar file that you downloaded
5. Uncheck Auto-reboot and flash.
6. Reboot to recovery immediately after flashing using POWER + HOME + VOL DOWN, as soon as the screen goes blank change to VOL UP while still holding the other buttons. Enjoy !!
Features:
support new CM 13.0 pattern encryption (sultanqasim)
fix slow flashing issue due to modprobe (present on only some devices) (#twrp)
libtar updated to latest upstream and fixes (jcadduono)
fixes for loading custom themes (_that)
TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy)
translation updates – added Italian, Czech and Polish and significant updates to Dutch
progress bar improvements – progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy)
fix input box text display (Dees_Troy)
Reboot option after zip install complete (bigbiff)
Other mostly invisible bug fixes and improvements
Download twrp 3.0.1-0
Download link for A800I: http://hostracon.com/androidlover5842/files/?dir=a8hplte/recovery/twrp
Download link for A800F: http://hostracon.com/androidlover5842/files/?dir=a8elte/recovery/twrp
Sources
A800I: https://github.com/Grace5921/android_device_a8hplte/tree/omni-5.1.1
A800F: https://github.com/Grace5921/android_device_samsung_a8elte/tree/cm-12.1
Credits to androidlover, making big things happen.
Flash this at your own risk. Make sure that you have stock firmware downloaded from SAMMOBILE in case of problems. This will trip knox counter. Last, no one here is responsible of what you do with your device. This recovery is meant exclusively for samsung A800I and samsung A800F, find both links separated above. Note on some android it is required to enable OEM unlocking when flashing. Go into Settings -> Developer Options -> OEM unlocking
Work.on my device....
Sent from my SM-A800F using Tapatalk
mawipc said:
Work.on my device....
Sent from my SM-A800F using Tapatalk
Click to expand...
Click to collapse
Cool, i will post new version soon.
Thanks..bro
Sent from my SM-A800F using Tapatalk
Hi,
Do you think this will also work on A700F since it also has the Exynos5430?
Or can it be adjusted?? Am trying to build CM/RR for A700F but not having succes until now.
Maybe i can look at your device tree for the last steps
A700F and A800F are much alike.
Thank you for this post.
I have SM-A800F, does the TWRP it work on marshmallow?
bt10 said:
Thank you for this post.
I have SM-A800F, does the TWRP it work on marshmallow?
Click to expand...
Click to collapse
Yes..
Sent from my SM-A800F using Tapatalk
hello link not working.... !! plz update link for a800f
stuck at boot loop
tried several times everything checked
usb debbuging
oem unlock
odin
twrp.tar
drivers
still get stuck at "kernal isnot seandroid enforcing"
after flashing this neither i boot in twrp recovery nor official recovery
please help me.....
hi.link not work.plz good link
plz..update the links in tar format...
Link is down
Sent from my SM-A800I using XDA-Developers mobile app
new recovery
Vivacity said:
UPDATE 07/04/2016 - New TWRP recovery 3.0.2-1 - Download links just below. Flash recovery.img with flashify
Download twrp 3.0.2-0
A800I: http://hostracon.com/androidlover5842/files/Tested_recovery/a8hplte/
A800F: http://hostracon.com/androidlover5842/files/Tested_recovery/a8elte/
TWRP recovery 3.0.1-0 for the SM-A800I / SM-A800F
Method 1:
1. Download flashify app from playstore
2. Flash recovery.img with flashify (Phone needs to be rooted)
3. Reboot to recovery and enjoy !!
Method 2:
1. You will need to download and install Odin on your PC.
2. Once you have Odin installed, download the proper .tar file for your device from the download link below.
3. Power off your device. Turn on your device using the proper key combo to get into download mode and plug usb cable
4. Use the AP button to browse to and select the tar file that you downloaded
5. Uncheck Auto-reboot and flash.
6. Reboot to recovery immediately after flashing using POWER + HOME + VOL DOWN, as soon as the screen goes blank change to VOL UP while still holding the other buttons. Enjoy !!
Features:
support new CM 13.0 pattern encryption (sultanqasim)
fix slow flashing issue due to modprobe (present on only some devices) (#twrp)
libtar updated to latest upstream and fixes (jcadduono)
fixes for loading custom themes (_that)
TWRP will now detect and install TWRP themes automatically through the normal zip install process (Dees_Troy)
translation updates – added Italian, Czech and Polish and significant updates to Dutch
progress bar improvements – progress bar updates during image flashing and better tracks progress during file system backups (tar) (Dees_Troy)
fix input box text display (Dees_Troy)
Reboot option after zip install complete (bigbiff)
Other mostly invisible bug fixes and improvements
Download twrp 3.0.1-0
Download link for A800I: http://hostracon.com/androidlover5842/files/?dir=a8hplte/recovery/twrp
Download link for A800F: http://hostracon.com/androidlover5842/files/?dir=a8elte/recovery/twrp
Sources
A800I: https://github.com/Grace5921/android_device_a8hplte/tree/omni-5.1.1
A800F: https://github.com/Grace5921/android_device_samsung_a8elte/tree/cm-12.1
Credits to androidlover, making big things happen.
Flash this at your own risk. Make sure that you have stock firmware downloaded from SAMMOBILE in case of problems. This will trip knox counter. Last, no one here is responsible of what you do with your device. This recovery is meant exclusively for samsung A800I and samsung A800F, find both links separated above. Note on some android it is required to enable OEM unlocking when flashing. Go into Settings -> Developer Options -> OEM unlocking
Click to expand...
Click to collapse
Helloo guys,
After facing so many problems like you guys have faced i decided to use the recovery.img and make it a .tar file of it..and here it is no issue will reboot in recovery with just one try CHECK IT OUT...
https://1drv.ms/u/s!Ap8YXa0RF0HFjEF19-VNu1DXBIEf
DON'T FORGET TO HIT THANKS..
just let me know it worked for u guys or not
Whollaa cheerss!!!!
prince Niks said:
Helloo guys,
After facing so many problems like you guys have faced i decided to use the recovery.img and make it a .tar file of it..and here it is no issue will reboot in recovery with just one try CHECK IT OUT...
https://1drv.ms/u/s!Ap8YXa0RF0HFjEF19-VNu1DXBIEf
DON'T FORGET TO HIT THANKS..
just let me know it worked for u guys or not
Whollaa cheerss!!!!
Click to expand...
Click to collapse
could this work for A800YZ 6.0.1?? thank you in advance
you are very much appreciated
Vivacity said:
UPDATE 07/04/2016 - New TWRP recovery 3.0.2-1 - Download links just below. Flash recovery.img with flashify
Download twrp 3.0.2-0
A800I: http://hostracon.com/androidlover5842/files/Tested_recovery/a8hplte/
A800F: http://hostracon.com/androidlover5842/files/Tested_recovery/a8elte/
Click to expand...
Click to collapse
@Vivacity could this work on A800YZ MM too? Thank you in advance
aftermath85 said:
could this work for A800YZ 6.0.1?? thank you in advance
you are very much appreciated
Click to expand...
Click to collapse
Maybe not i guess!as we can see the variant is different don't take any risk this may hard brick or bootloop your device buddy!
You can do lil more searching in the forums for your varient..
BEST OF LUCK!! cheerss!!
Sent from my SM-A800F using Tapatalk
aftermath85 said:
@Vivacity could this work on A800YZ MM too? Thank you in advance
Click to expand...
Click to collapse
I don't think so. Sorry forgot, it's been a while since i've changed device.
Vivacity said:
I don't think so. Sorry forgot, it's been a while since i've changed device.
Click to expand...
Click to collapse
prince Niks said:
Maybe not i guess!as we can see the variant is different don't take any risk this may hard brick or bootloop your device buddy!
You can do lil more searching in the forums for your varient..
BEST OF LUCK!! cheerss!!
Sent from my SM-A800F using Tapatalk
Click to expand...
Click to collapse
Thanks for quick reply @prince Niks and @Vivacity
I see, because in this version(lollipop) https://forum.xda-developers.com/sa...very-twrp-3-0-0-0-sm-a800f-galaxy-a8-t3314178 I've tried and it worked.., I just want to confirm if somebody tried it already
Sadly, There's nothing in this forum for my variant, we do not have alot of custom roms in A8, so maybe I could just debloat the stock and flash xposed and viperfx,
Thank you for your help. If I find time to try it, I'll let you know if it worked..
prince Niks said:
Maybe not i guess!as we can see the variant is different don't take any risk this may hard brick or bootloop your device buddy!
You can do lil more searching in the forums for your varient..
BEST OF LUCK!! cheerss!!
Sent from my SM-A800F using Tapatalk
Click to expand...
Click to collapse
It worked! but its not the updated version, i'm in TWRP 3.0.0.0
anyway thank you again
New download link required
Dear sir,
Download links for A800F A800I TWRPs as you provided are broken, plz upload some other link for download
Bevor you do something with your Device do a Backup of all your Data (Contacts, Pic´s ect.) outside of your Device (in a Cloud or on your PC)I'm not responsible for bricked devices, dead SD Cards, broken phone chargers etc.You do all at your own Risk!
If you are new, just work the first 3 steps from top to bottom.
Flash Root & Odin3:
At the https://autoroot.chainfire.eu/ site you can Download the the Root File for your Device (Link to A300FU). When you Downloaded the "CF-Auto-Root-xxx.zip" File unzip it. In this zip you will find the Odin3xxx.exe and the Root .tar.md5 File
You need this Odin3 tool also for TWRP and going Back to Stock Rom
For Root: Make sure your device is in ODIN download mode (you can get there by holding VolDown+Home+Power when the device is turned off), then start the included Odin3xxx.exe file, press the PDA/AP button, select the Root .tar.md5 file, and click Start, never interrupt this action! You can find more detailed instructions and assistance at [CENTRAL] CF-Auto-Root Thread
Flash TWRP:
You can Download the TWRP File at the [RECOVERY][ROOT][TWRP 3.0.2-1]Samsung Galaxy A3(2015) SM-A300F/FU/G/H/M Thread. I recommend the Build from Post 80 it has working MTP & OTG for the FU Device!
To Install Start download mode (you can get there by holding VolDown+Home+Power when the device is turned off), then start the Odin3xxx.exe file, press the PDA/AP button, select the TWRPxxx.tar file, and click Start, never interrupt this action! After Reboot you can get there by holding VolUp+Home+Power when the device is turned off.
There are also a TWRP 2.8.7.0 and a TWRP 3.0.0-0 but both have small bugs so i recommend TWRP 3.0.2-1 only if you have Problems try to downgrade
TWRP Bugs:
TWRP 2.8.7.0 Can only Install CM12.1 ROMs, it has no MTP & no OTG
TWRP 3.0.0-0 Can only Install CM13 ROM & it has no MTP but OTG is Working
TWRP 3.0.2-1 Can not install @cbolumar ROMs and the Build from Opening Post has no OTG
TWRP 3.1.0 Only tested with LineageOS, it still has no MTP!!!
Flash a Custom ROM:
You can Install a ROM now with TWRP you can enter TWRP by holding VolUp+Home+Power when the device is turned off.
In TWRP IT IS HIGHLY RECOMMEND TO DO FIRST A BACKUP! (I Recommend to placed at the SD Card)
Backup -> Storage : Micro SDcard -> Ok -> [x] Boot, [x] System, [x] Data, [x] Cache, [x] Recovery, [x] EFS, [x] MODEM, [x] APNHLOS -> Swipe to Backup
If anything goes wrong you can easy Restore your Device in TWRP without losing anything, so it's also recommended to Backup your Custom ROM
Now you need your Custom Rom, Google Apps like Opengapps for ARM and i recommend latest Magisk[/URL, OR (if you prefer) [URL="http://download.chainfire.eu/supersu"]SuperSU to Manage Root Access.
Place this zip Files at your Device (I Recommend to placed at the SD Card)
Now you enter TWRP and go to:
Wipe -> Advanced Wipe -> [x] Dalvik / ART Cache, [x] System, [x] Data, [x] Cache -> Swipe to Wipe
Now go back to main menu and select:
Install -> Storage : Micro SDcard -> Ok -> now choose your ROM zip first, you can "Add More Zips" and choose Gapps zip and if you want you can Add direct Magsik OR SuperSU zip as well -> Swipe to Confirm Flash
After placing files the Device need a Reboot, at the First Start it will Install your Rom, so be patiently at first start!
Flash Xposed:
Magisk user on Android M (6.x) or better follow this Thread [2018.5.6][Magisk] Systemless Xposed v89.3/v90.2-beta3 (SDK 21-27) by topjohnwu
SuperSU user on Android M (6.x) or better follow this Thread [OFFICIAL] Xposed for Lollipop/Marshmallow/Nougat/Oreo [v90-beta3, 2018/01/29]
info:
SDK 21: Android 5.0 | SDK 22: Android 5.1 | SDK 23: Android 6.0 | SDK 24: Android 7.0 | SDK 25: Android 7.1 | SDK 26: Android 8.0 | SDK 27: Android 8.1
at CM12.1 ROM's Offical Xposed works fine.
Download the "sdk22-arm" zip, and Install it with TWRP first start need a long time! be patient!
After the Framework is installed you install the "XposedInstaller" apk, done.
For stock rom you should visit [UNOFFICIAL] Xposed for Samsung Lollipop by arter97 but it´s for deodex'ed ROMs for this you should visit [Deodex][SM-A300] Deodex Thread for Samsung Galaxy A3
emtepe35 said:
Working only on MM touchwiz (tested by me on A300FU with TWRP 3.0.2-1)
How to install:
- Install this Xposed Installer App version http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
- Make a nandroid backup
- Copy the Xposed file and the uninstaller to your sdcard
- Flash "xposed-vxx.x-sdkxx-tw-armxx-custom-build-by-wanam-xxxxxxxx.zip" through a custom recovery (TWRP/CWM...)
- Reboot and Waiiiiiiiiit, it may take several minutes to boot up depending on your Rom size.
xposed.zip download (ARM SDK23)
https://www.androidfilehost.com/?fid=24591000424962808
Official thread link:
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
Click to expand...
Click to collapse
Flash Stock ROM:
Download your Firmware at Sammobile than i recommend you to Wipe all (Advanced Wipe) in TWRP except the SDcard!
Boot your Device in ODIN download mode (you can get there by holding VolDown+Home+Power when the device is turned off), then start the Odin3xxx.exe file, press the PDA/AP button, select the .tar.md5 file, and click Start, never interrupt this action!
After doing this you lose TWRP and Root so if you need it you have to install it new.
You should not try to Flash 4.x ROMs it could Brick your Device!
With a Stock Marshmallow ROM it is recommended to use a Custom Kernel
A300FU / A300Y Custom Kernel:
Kraken Kernel R1 from @bulgar
Will only work with at Stock Marshmallow (6.x) ROM
-soon- LineageOS Support
hadesKernel from @corsicanu
Will only work with at Stock Marshmallow (6.x) ROM
A300FU / A300Y Modification:
[MOD][Stock Rom] Enable More Quick Tiles on Touchwiz from @astrit1
Will only work with at Stock Lollipop (5.x) ROM
There are still the following Bugs:
No Bugs
[ROM][A300FU][6.0.1] [GS]Mod from @[GS]
There are still the following Bugs:
Private Mode Not Work
WHASISTROM We have a simple stock rom [A300FU/OL3/OJ5] from @nowheel Discontinued
nowheel said:
Bad news i abbandoned project.. after my hdd is broken with project and all whasistrom file, work document and other.
Click to expand...
Click to collapse
A300FU / A300Y Custom ROMs:
Check also in All Samsung Galaxy A3 (2015)'s ROMs Thread from @Falaysia
-Recommended-
LineageOS 15.1 Unofficial for Samsung Galaxy A3 (2015) from @vl_w
There are still the following Bugs:
* FM works only on headphones
* Unable to capture video in 1080p (only 720р works)
* Incorrectly work with secondary sim (incall sound issues)
* On FU and H doesn't adjusting flahlight brightness
* On H incorrectly detecting battery temperature
* Hardware keystore doesn't work (only software)
* NFC sometimes doesn't work
LineageOS 14.1 Unofficial for Samsung Galaxy A3 from @vl_w
There are still the following Bugs:
no Bugs
CyanogenMod 12.1 for Samsung Galaxy A3 from @evilracer123 Discontinued
Meizirkki said:
OP is no longer working on a300fu
Click to expand...
Click to collapse
In the Opening Post is not the latest Build!
This is the post with the last Build from 19th January 2016
evilracer123 said:
Here's the newest build:
https://mega.nz/#!OcJ0BKKQ!hkQN4SnzY-40tm9v79vzP_erZxIxtpa0_jPwMvLQaiU
Click to expand...
Click to collapse
There are still the following Bugs:
-SoD´s (can be Fixed for the most users by using CPU Awake - Wake Lock with Unlimited time & Activate on Reboot (Clean Master turns it off btw) or Wake Lock - PowerManager with "PARTIAL_WAKE_LOCK")
-Preview in stock camera (can be Fixed by change Resolution to 16:9 in Settings)
-FM Radio not Working (can be Fiexed by using Spirit2)
-Folders are not displayed correctly with LCD density 260 DPI (can be Fixed by changing it to 240 DPI)
-When screen is off touch buttons still working, at touch the phone vibrates.
-USB Conection adb only working MTP, PTP, OTG or UMS not Working (you can use MTP and OTG in TWRP 3.0.2-1 Recovery)
-for some users "com.qualcomm.timeservice" fc time to time (can be Fixed by disable the automatic services in Time settings)
-for some users gps are not Working
at my device:
-Cast screen is not Working
CyanogenMod 12.1 Resurrection Remix from @cbolumar Discontinued
garbanura said:
he switched to a5 and abandoned a3 for good, i know from first hand sorry.
Click to expand...
Click to collapse
There are still the following Bugs:
-SoD´s (can be Fixed for the most users by open integrated Kernel Adiutor and allow Root access)
-Preview in stock camera (can be Fixed by change Resolution to 16:9 in Settings)
-FM Radio not Working (can be Fiexed by using Spirit2)
-When screen is off touch buttons still working, at touch the phone vibrates.
-USB Conection adb only working MTP, PTP, OTG or UMS not Working (you can use MTP and OTG in TWRP 3.0.2-1 Recovery)
at my device:
-Cast screen is not Working
Note: can only installed with TWRP 2.8.7.0 after installing you can upgrade your Recovery to TWRP 3.0.2-1
CyanogenMod 12.1 from @cbolumar Discontinued
garbanura said:
he switched to a5 and abandoned a3 for good, i know from first hand sorry.
Click to expand...
Click to collapse
There are still the following Bugs:
-SoD´s (can be Fixed for the most users by using CPU Awake - Wake Lock with Unlimited time & Activate on Reboot (Clean Master turns it off btw) or Wake Lock - PowerManager with "PARTIAL_WAKE_LOCK")
-Preview in stock camera (can be Fixed by change Resolution to 16:9 in Settings)
-FM Radio not Working (can be Fiexed by using Spirit2)
-When screen is off touch buttons still working, at touch the phone vibrates.
-USB Conection adb only working MTP, PTP, OTG or UMS not Working (you can use MTP and OTG in TWRP 3.0.2-1 Recovery)
-for some users "com.qualcomm.timeservice" fc time to time (can be Fixed by disable the automatic services in Time settings)
at my device:
-Cast screen is not Working
Note: can only installed with TWRP 2.8.7.0 after installing you can upgrade your Recovery to TWRP 3.0.2-1
Hope this will Help to answering the most Questions
By the way i'm not a Dev, i'm only a regular user that wants to help!
You will also get Information and Help at the Everything Samsung a3 Thread :good:
Nice guide. Which one would you recommend between the CM12.1 and CM12.1 RR?
Also, for downgrading TWRP, you just need to flash the older version, right?
King-V said:
Nice guide. Which one would you recommend between the CM12.1 and CM12.1 RR?
Also, for downgrading TWRP, you just need to flash the older version, right?
Click to expand...
Click to collapse
Definitely CM12.1 RR!
Right just flash first TWRP 2.8.7.0 via Odin3 install the ROM and than Flash TWRP 3.0.2-1 via Odin3, btw. the Build from post 80 has a working MTP and OTG in TWRP (only in TWRP not at the ROM!)
And you can anytime time flash TWRP 2.8.7.0 again if you have to Install new
So only good ROM for daily driver will be @mygalaxya cm13?
emtepe35 said:
So only good ROM for daily driver will be @mygalaxya cm13?
Click to expand...
Click to collapse
This could need some time, i recommend to try CyanogenMod 12.1 Resurrection Remix, or a Stock MM with aresKernel :good:
Jonny_Hood said:
This could need some time, i recommend to try CyanogenMod 12.1 Resurrection Remix, or a Stock MM with aresKernel :good:
Click to expand...
Click to collapse
It's lot to do with RR to make it stable without SOD etc. (I really need normal usb connection for daily usage)
What's twrp should I use with stock mm to flash ares kernel and can I go back to lollipop via odin? (Mygalaxya's cm13 needs LP bootloader and modem)
emtepe35 said:
It's lot to do with RR to make it stable without SOD etc. (I really need normal usb connection for daily usage)
What's twrp should I use with stock mm to flash ares kernel and can I go back to lollipop via odin? (Mygalaxya's cm13 needs LP bootloader and modem)
Click to expand...
Click to collapse
Best is TWRP 3.0.2-1 and yes you can go back anytime via odin
Jonny_Hood said:
Best is TWRP 3.0.2-1 and yes you can go back anytime via odin
Click to expand...
Click to collapse
Thanks I tried this but I flashed wrong firmware and wifi was broken but I know how to repair it.
Tomorrow I'll try flash compatible firmware and try again.
After flash MM and reflash LP it was a bootloop in first boot. I went to download mode and flash twrp then restore backup and it boots up.
Thanks
emtepe35 said:
Thanks I tried this but I flashed wrong firmware and wifi was broken but I know how to repair it.
Tomorrow I'll try flash compatible firmware and try again.
After flash MM and reflash LP it was a bootloop in first boot. I went to download mode and flash twrp then restore backup and it boots up.
Thanks
Click to expand...
Click to collapse
This Bootloop thing happened at my Device sometimes too, if i flashed a stock ROM via Odin, thats why i started to Wipe all Partitions via TWRP before flashing, that works for me flawless
Than happy flashing tomorrow
Jonny_Hood said:
This Bootloop thing happened at my Device sometimes too, if i flashed a stock ROM via Odin, thats why i started to Wipe all Partitions via TWRP before flashing, that works for me flawless
Than happy flashing tomorrow
Click to expand...
Click to collapse
OK I've got one last question the wipe in twrp means it deleting it to zero and if I accidentally go to system and not to download I'll get hard brick? Or wipe means it restoring it to factory files? Wipe modem too?
Sorry for noob questoms but I want to be sure before do anything
emtepe35 said:
Wipe in twrp means it deleting it to zero?
Click to expand...
Click to collapse
Yes
emtepe35 said:
If I accidentally go to system and not to download I'll get hard brick?
Click to expand...
Click to collapse
No it will not brick, if you accidentally go to system it will stuck at A3 logo, than you can go to Download Mode with pressing "VolDown+Home+Power" for 30 Sec
emtepe35 said:
Or wipe means it restoring it to factory files? Wipe modem too?
Click to expand...
Click to collapse
Wipe -> Advanced Wipe -> [x] Dalvik / ART Cache, [x] System, [x] Data, [x] Internal Storage, [x] Cache -> Swipe to Wipe -> go back -> go back -> Format Data -> yes
Added to Sticky Roll-Up Thread
Cheers
Razvan
Forum Moderator
Razvan said:
Added to Sticky Roll-Up Thread
Cheers
Razvan
Forum Moderator
Click to expand...
Click to collapse
Thank you very much
What about stock marshmallow xposed?
Sorry I'm noob and I can't find it alone.
emtepe35 said:
What about stock marshmallow xposed?
Sorry I'm noob and I can't find it alone.
Click to expand...
Click to collapse
As far i know, it will not working with Stock MM.
Known issues:
- Bootloops on Samsung stock ROMs. That's due to Samsung's changes to ART. There are unofficial builds that work around this by deodexing and adjusting the ROM.
Jonny_Hood said:
As far i know, it will not working with Stock MM.
Known issues:
- Bootloops on Samsung stock ROMs. That's due to Samsung's changes to ART. There are unofficial builds that work around this by deodexing and adjusting the ROM.
Click to expand...
Click to collapse
I had a LP stock Samsung touch wiz and it was working. Some people tells they have MM xposed. I'll try to ask them
emtepe35 said:
I had a LP stock Samsung touch wiz and it was working. Some people tells they have MM xposed. I'll try to ask them
Click to expand...
Click to collapse
Let me know if and how it work
I'm happy with this.
Working only on MM touchwiz (tested by me on A300FU with TWRP 3.0.2-1)
How to install:
- Install this Xposed Installer App version http://forum.xda-developers.com/attachment.php?attachmentid=3383776&d=1435601440
- Make a nandroid backup
- Copy the Xposed file and the uninstaller to your sdcard
- Flash "xposed-vxx.x-sdkxx-tw-armxx-custom-build-by-wanam-xxxxxxxx.zip" through a custom recovery (TWRP/CWM...)
- Reboot and Waiiiiiiiiit, it may take several minutes to boot up depending on your Rom size.
xposed.zip download (ARM SDK23)
https://www.androidfilehost.com/?fid=24591000424962808
Official thread link:
http://forum.xda-developers.com/xposed/unofficial-xposed-samsung-lollipop-t3180960
Hi, what I have to do to downgrade my A300FU to lollipop (Brand Italy Vodafone)?
InfamousMykol said:
Hi, what I have to do to downgrade my A300FU to lollipop (Brand Italy Vodafone)?
Click to expand...
Click to collapse
Stock ROM:
Download your Firmware at Sammobile than i recommend you to Wipe all (Advanced Wipe) in TWRP except the SDcard!
Boot your Device in ODIN download mode (you can get there by holding VolDown+Home+Power when the device is turned off), then start the Odin3xxx.exe file, press the PDA/AP button, select the .tar.md5 file, and click Start, never interrupt this action!
After doing this you lose TWRP and Root so if you need it you have to install it new.
TeamWin's TWRP Touch Recovery for LG G3 - currently available only for F400 variantshttps://twrp.me/
TWRP is an open source, community project. TWRP development is done by roughly 4 people at this point. We also have a large support community with many people who are willing to answer questions and help people with their devices either through our IRC channel or on forums like xda-developers.
Team Win was originally formed to work on porting WiMAX to CM7 for the HTC EVO 4G. After our work on the EVO 4G we wanted to work on a project that would work on more devices than just the EVO 4G and we settled on working on a recovery. Today TWRP is the leading custom recovery for Android phones.
A custom recovery is used for installing custom software on your device. This custom software can include smaller modifications like rooting your device or even replacing the firmware of the device with a completely custom “ROM” like OmniROM
You can find the source code for TWRP at github.com/omnirom/android_bootable_recovery/
Flashing Instructions
To install recovery images use Flashify / Rashr from Play Store or flash in your current recovery. Otherwise do the following:
1. Go to install, find and select the Images... button.
2. Browse to the image that you downloaded and select it.
3. Choose recovery and swipe to flash.
OR
1. Move recovery.img to internal storage.
2. Open terminal window/command prompt to execute following commands
Code:
adb shell
su
dd if=/dev/zero of=/dev/block/platform/msm_sdcc.1/by-name/recovery
dd if=/sdcard/recovery.img of=/dev/block/platform/msm_sdcc.1/by-name/recovery
exit
exit
adb reboot recovery
About this TWRP
compiled on LineageOS-14.1 source
always up-to-date
fixed screen brightness
permissive selinux
disabled logd/logcat in recovery
fuse exfat, ntfs-3g, jpeg, usb-otg support
external storage as default storage
touch to wake
backup of all partitions including modem, efs
crypto/decryption may work or not..
Changelog
* 170430
- Initial Build
- Disabled HW crypto due to build fails
* 170501
- Deleted unused flags
- Add back HW crypto
- exfat support
* 170507
- Disabled logd/logcat (fix for "device or resource busy", hopefully)
* 170519
- Updated to v3.1.1
- Fix Aroma Installer crash (hopefully)
Known issues
ZIP files with date check assert can't be installed (eg. crDroid) - Users should delete date check assert in binary by themselves.
AROMA Installer stucks at loading - will be fixed soon..
Download Links
Unofficial | Official
Sources
https://github.com/TheNoFace/android_device_lge_g3-common-TWRP/tree/twrp
(Based on https://review.lineageos.org/#/c/160056/)
Remember to do backup of your current recovery before installing
Any plans for suporting other G3 variants in future?
@fprhqkrtk303: Now have 2 version twrp to flash. Which one to choose to flash? Unofficial or official? Thanks!
Official TWRP for D855 is so bad... sorry to say that. It doesn't work properly and even if LineageOS recommends it it's just not able to flash LOS builds.
When you want to reboot in recovery it hangs in a bootloop and when you want to shut the device off it just turns on back. So far we only have the unofficial version for D855 fully working.
ahk31 said:
Any plans for suporting other G3 variants in future?
Click to expand...
Click to collapse
Planning to support more devices when F400 version is stable.
You can build your own TWRP using my source.
@chuyennho184 @andrewKode Official version from TWRP uses older device tree and actually no one maintains. Recommend using unofficial version.
@fprhqkrtk303: I saw update firmware on March 22th for F400 variants but I don't have a link. Do you have a link? Thanks for bother you.
Updated to v3.1.1 (170519)
fprhqkrtk303 said:
Updated to v3.1.1 (170519)
Click to expand...
Click to collapse
Is aroma bootloop problem fixed in this new version?
MESA said:
Is aroma bootloop problem fixed in this new version?
Click to expand...
Click to collapse
Not tested yet. Can you check?
fprhqkrtk303 said:
Not tested yet. Can you check?
Click to expand...
Click to collapse
Yes. Tried it yesterday. Bootloop problem is still present.
andrewKode said:
Official TWRP for D855 is so bad... sorry to say that. It doesn't work properly and even if LineageOS recommends it it's just not able to flash LOS builds.
When you want to reboot in recovery it hangs in a bootloop and when you want to shut the device off it just turns on back. So far we only have the unofficial version for D855 fully working.
Click to expand...
Click to collapse
LoL i maintain twrp for d855 i don't have any issue with that recovery(3.1.1) fully tested..
and this problem cause by bootloader..
or you mean this
Fixed rebooting when no OS is present (Dees_Troy)
"unofficial version for D855 fully working."
Nope dadi11 twrp encrypt no work.. ;]
ZjemCiKolege said:
LoL i maintain twrp for d855 i don't have any issue with that recovery(3.1.1) fully tested..
and this problem cause by bootloader..
or you mean this
Fixed rebooting when no OS is present (Dees_Troy)
"unofficial version for D855 fully working."
Nope dadi11 twrp encrypt no work.. ;]
Click to expand...
Click to collapse
Dude, Idk what you're maintaining but this is what happens:
- TWRP sometimes does not reboot back in recovery (it hangs on LG screen)
- hangs on flashing LineageOS
- When chosed to turn off the device from the recovery it turns back ON right after it shuts down.
andrewKode said:
Dude, Idk what you're maintaining but this is what happens:
- TWRP sometimes does not reboot back in recovery (it hangs on LG screen)
- hangs on flashing LineageOS
- When chosed to turn off the device from the recovery it turns back ON right after it shuts down.
Click to expand...
Click to collapse
1. I try but did not happen.
2. Build of lineage?(i flash each version from february to 21.04) no any issue.
3. Issue of custom rom(problem with turn on charger and boot same issue..) ;]
MESA said:
Is aroma bootloop problem fixed in this new version?
Click to expand...
Click to collapse
Hello, apparently no...
https://twrp.me/site/update/2017/05/19/twrp-3.1.1-0-released.html
If it's a software problem, it would be the problem of AROMA devs, but if it's related to software keys incompatibility it's will be the work of TWRP devs.