Hi guys, before start my english is not so good but i tried to my best.
5 week ago my Lumia 920 is stoped working. I tried to power on and phone screen gived the low battery logo.
After see that, i take my charger cable and put it in socket. It start the charge but when is had enough charge for start and boot, it starting to keep restarting and restaring again.
I start to think what it cause this? Battery? USB socket? So I go to aliexpress and i buyed a new socket and battery and 2 week later they arrived and i replaced them.
After the replacement nothings changed.
What should i do guys? Please, i dont want to work properly. Just want to back up my datas and personal files. Please help me :crying:
Related
It was unlocked and working perfect until the battery went completely dead and wasnt charged back up for a week. After pluging in the charger I was unable to do a complete charge as the pda keeps starting up. It runs for about a minute or two then restarts and boots back up, the cycle continues with no end. I got to work for about 10 ten minutes, the phone worked, the charger was active in the battery option menu, but then it started all over again. I've reflashed and changed roms. The amber charge light does appear. Also hard reset doesnt work. Please help, bought the phone used but only got to enjoy it for a day.!
It maybe the battery is banjaxed, I have seen similar behaviour with an ipaq and a defunct battery.
if not its board memory
if im right yourin big trouble u have to replace the whole main boards .. i hope im wrong it juist bthe battery.
good luck bro
Hi,
I have an O2 XDA 1. This morning I noticed the battery was empty so I tried plugging it in to charge. The orange light does not come on and the battery does not charge no matter how long I leave it on. I have tried it both in the cradle and with an adaptor but still nothing happens. I even changed the internal battery but it is still the same.
Any ideas as to what i can do?
Dale.
i have the same problem. can anyone help me with this problem.
thanks b4.
best regard
Charge problems
Hi! i don't know will it halp you or knop. I am not a profi with pda...
but i had the same problems before.
I used car charger. next day battery was almost dead. u put usual charger. not results. u put it through cradle, the same not result.I scared. then i tryed to put car charger,then wall charger,then car charger and wall charger again and it started !!!
i guess the problem is in pda power logic <program didn't switch different power from charger and stop receive a charger in general >
may be u have this problems bc in the wall power were shortly powered down <may be shortly it jump from 220 to 200 voltage>
u can also try to put it to 220 and 120 voltage wall power.
sorry if my english is awful. hope it will help u
Hello Guys..
I've same problem with you guys..
The last day i charge my Wallaby was 2 days ago, and this morning i try to re-charge it with USB but cannot recharge, i try the cradle but it doesn't recharge too.
I think the battery was good because my O2 was powered on and running normal, just cannot re-charge.
I try to remember what i have done before... then.. i remember..
Before i try to recharge, my friend was try to connect his Universal USB Cable for his HP IPAQ (I forget the series) to my Wallaby and his PC detect and try to Synch my Wallaby but the charging indicator doesn't lite.
I Think, Maybe.. something wrong with the electricity, amphere, voltage, or whatever that comes out from his Universal USB Cable.
I have been hard reset and go to boot loader to see the Battery test, but doesn;t help..
Any body can help us??
alitkeren said:
Before i try to recharge, my friend was try to connect his Universal USB Cable for his HP IPAQ (I forget the series) to my Wallaby and his PC detect and try to Synch my Wallaby but the charging indicator doesn't lite.
Click to expand...
Click to collapse
That´s the problem. Ipaq has other Pin layout, so you have damaged something in your device. I´m giessing, that the fuse is blowen away...
Stefan
Oh my..
My Wallaby was physically broken because the shortcircuit, right?
I affraid the money i must to spend to repair will be the same like i buy it (second hand)..
Nothing i can do but go to repair shop, right?
You can try fixing it yourself. You can check if the fuse is not working any more and you can replace it, if you´re kind in soldering....
Stefan
Hello LumpiStefan,
It was a long time no see.
Still use the wallaby with ROM cooked by your ROM Cooker until now.
I just wan to give my credit to you LumpiStefan.
Cheers.
same problem here....
Wallaby charging problem
Hi guys,
I have a charging problem too. I have a wallaby. when i put it onto cradle led turns to amber and then immediately to green. Settings > Power section says the battery full of 100%. But when put off it from cradle, 1 minute later, it goes off. I changed the battery with a new one. still same problem. I also checked two fuses located on both side of the main board. They are OK. No fuses blowned.
So, don't know what to do. it actually works very well but charging problem. I don't want to throw it away. any other external charging device is OK for me.
I need your helps. Thanks.
LumpiStefan said:
You can try fixing it yourself. You can check if the fuse is not working any more and you can replace it, if you´re kind in soldering....
Stefan
Click to expand...
Click to collapse
Hello all. This is my first post.
I've used my Wallaby for many years. Yesterday it doesn't start anymore and if I put it into the cradle no light is displayed.
Last change I did was to replace my GSM SIM card with a UMTS one; since that moment it doesn't work anymore.
You were talking about fuses... Where are they located exactly ? What kind of fuse are they ? How can I check if they're blowned ?
Moreover.. I've a backup of my Wallaby... eventually is there any emulator where I can resume/restore all my contacts ?
Thanks,
Marco
Looking for replacement Wallaby
If anybody is interested, I have a few Wallabys for sale.
May be cheaper than trying to replace broken screens or paying for repairs.
Wallabys for sale
Hello, i've a small Problem with my brand new Lumia 920...
yesterday i got it from postal service, after installing everything the battery got empty... ok no problem... pluged in the charger, i know from my HD7 that it could take a few minutes that the phones charges a bit before next boot...
but the lumia 920 didn't boot also not after about 1 hour on charger...
i just see the nokia messages then a small flicker line on the bottom of the screen and then it resets (i know it resets because the recognized devices, nokia bootloader and another one, by windows disapears)
and the "empty red" battery symbol apears with a charger sign when plugged in (whats normally be total normal) when trying to boot without charger then just the "empty red" battery symbol apears!!
when on charger, after the batterysymbol, i can see that the display isn't turning off, just showing black but has some light on it... definitly not that black when the phone is turned off completely...
yesterday i tried a few button combinations... plugin with volume down, shows a flash on the screen... after that the phones boots normally..
today i ran out again of battery, but now nothing helps...
anyone got this issue too?? any tip what i can try or do??
are you using the original charger?
The 920 needs high current charger in order to charge normally.
yeah i had this to about a week ago, just sit it on charge for a long long time with the stock charger. mine took probably 4-5 hours, then hit the on button and it came on (still saying it was flat, but turned on at least). havent had the issue since.
Edit: also, are you running stock rom? just wondering as im on flashed portico and i literally just saw another bloke with the portico update complaing of the same thing... which has me wondering if its firmware or something else..
Hello,
i guess i have the portico update allready...
my carrier released the phones 3 weeks ago...
i'm on 8.0.10211.204
1232.5951.1249.1002
i'm using of course the original charger that have come with the phone...
as it looks like it really takes many hours... so as yesterday on mine... i tried everthing... than i decided to let it alone... after watching TV the phone rings sometimes about a new message... !? wtf.... i will try next time when the battery rans out to just let it on the charger a few hours without trying to press some button combinations or disconnect and reconnect a few times ...
but i'm pretty sure this has something todo with that, that the screenlight is still on when on charger and this batterysymbol w charger icon apears or better said than disapears...
i thing the display still drains current and so the charge take longer to have the minium charge for boot... ?!
I have the same problem after I flashed it to portico
my phone still charging for 1 hour to start up & when it done the battery was 6%
ok, no i've changed my response, my phone went flat yesterday about 7am (perth time), its been on charge since, and no boot. (what am i up to? 27 hours?) ive tried different chargers (my Qi wireless charger, stock charger, random microusb charger), even tried different wall sockets. stressful....
Edit: sent back to nokia. apparently its bricked. also, holding the volume down button and plugging in the charger is meant to display an explanation mark while the phone is switched off. the person i spoke to at Nokia asked me to do this, but mine didnt display anything, thats when she decided it was bricked. i wonder if its anything to do with flashing the custom firmware... apart from this issue, the rom felt very stable.
Hi there. I promised my girlfriend to make her Samsung Galaxy S2 work again. The thing is, suddenly it won't charge. After trying several different chargers did I bought a new battery. But it didn't work either. Then I bought a new USB charging port and replaced it yesterday. After I plugged in the Charger, the screen shows the charging batteri screen for a couple of seconds and the went black. Then there was no power at all. I tried the other battery, I tried to make sure everything was as it should be inside on the motherboard.
Please help me..
I tried to make a hard reset but it didn't start op of course because the battery has no juice. I tried to unplug the battery for 10 seconds, then I plugged the charger in and afterwards the battery, but still no sign of power.
matthieusimon said:
Hi there. I promised my girlfriend to make her Samsung Galaxy S2 work again. The thing is, suddenly it won't charge. After trying several different chargers did I bought a new battery. But it didn't work either. Then I bought a new USB charging port and replaced it yesterday. After I plugged in the Charger, the screen shows the charging batteri screen for a couple of seconds and the went black. Then there was no power at all. I tried the other battery, I tried to make sure everything was as it should be inside on the motherboard.
Please help me..
I tried to make a hard reset but it didn't start op of course because the battery has no juice. I tried to unplug the battery for 10 seconds, then I plugged the charger in and afterwards the battery, but still no sign of power.
Click to expand...
Click to collapse
Hm... you should always be able to start the phone via charger, otherwise something is severly broken.
My advice: Get your girlfriend a new phone or rather take her out for a nice dinner!
It's cheaper and you'll have a great time, hopefully.
PS Get the money back for USB charging port and battery. Women are a really terrible influence on men.......
Conny84 said:
Hm... you should always be able to start the phone via charger, otherwise something is severly broken.
Click to expand...
Click to collapse
Hi, i am having similar situation, but i would like to be sure, its definitelly dead. What's different in my case, i was using CM 11 M8 and updated to M9 the day it was released, no problem with booting, just to the moment, when battery dropped to 0% and phone turned off. When i plugged it in, i was there - nothing, black screen, no access do download or CMW mode, tried other battery but no luck.
I just dont understand what has happened, that simple update can kill the phone or what?
Hey guys i got a really big and complicated problem. I have gt-i9100G, and couple of months ago, my charging port broke, so i ordered a new one. Since it laste over a month to get shipped to my country i find a soultion to charge my phone by cutting off my charger and put red and black wire between my batter and phone pins. It lasted for long and charged it. Now when my new charging port arrived i changed it, and now my phone wont charge or turn on. My phone wont turn on except i put that wires and make contact. But still when and when i inesert usb to charge it it shows me its charging, but its not charging, just fake charging. Also my "battery option" from settings dissapeard. So is it software problem, or i need to get a new battery, or i ****ed up my phone with that wire charging. If anyone can help me i would appreciate it..
Sorry for my bad english and thanks in advance
Update
When i charge and turn on phone by putting red and black wires between phone and battery, and turn it off, than off, this is what i get(Attention: It's not my phone on the picture, i found it on internet, but i get the same problem)
http://www.gsmlover.com/attachments...t-i9105-charging-problem-sam-gt9105-ch-pv.jpg
Its not battery problem, and i dont know what to do
anyone?
Nobody, really?