Hi,
Last night my lenovo tab 2 a 7-10 got an update, i downloaded the update and proceed to restart and install it, the update failed at around 90% and the tab rebooted, its now stuck at recovery, factor reset/wiping cache did not help, im unable to flash a rom as SP Flash tools cant detect it even after installing all the necessary drivers and also when i press the volume down button when connecting to my PC, is it possible to flash a stock rom via recovery? if so, can anyone send me the link for the stock rom, should be a zip file i think? i have already download a stock rom from "forum.mytabletguru.com" but its in rar format and i cant flash it using SP flash tools as already mentioned before, thanks in advance
PS: im not an advanced user, so using ADB is out of the question, the tab is not rooted and lenovo service center is like a 100 miles away so its not an option
Edit: i was able to download the latest lollipop rom T2-A7-10F_S000044_ROW_TO_T2-A7-10F_S000054_150801_ROW_WC69.zip and successfully updated via recovery
same goes here bro..im also stucked ,but mine was rooted ,now its showing error ,i tried wipedata/factory reset ,,,not worked
same here.
hasi6764 said:
same goes here bro..im also stucked ,but mine was rooted ,now its showing error ,i tried wipedata/factory reset ,,,not worked
Click to expand...
Click to collapse
remedialguns said:
same here.
Click to expand...
Click to collapse
I have successfully flashed the stock lollipop rom, the steps are simple, download the rom, copy to ext sd card, boot into stock recovery, install from sd card and choose stock rom.zip, took about 10 minutes and drained a lot of battery, so i advice you to charge your tab before doing so.
Stock Rom link:
https://yadi.sk/d/E5xmV2lOiXPgc
Edit: this will remove root access
Bricked lenovo tab 2 A7 10f
Bricked lenovo tab 2 A7 10f
install vcom drivers
tool : SP FLASH TOOL
stock rom kitkat - lollipop
It doesn't work
Help me....
tablet not turn
tablet does not enter - recovery
Related
Hello,
I have a problem with my Lenovo. After updating my Lenovo K910 died - it wont boot. Shows Lenovo Logo and hang.
Reseting to factory default doesn't take effect.
I want to install new firmware, but it dont have SD slot, fastboot doesn't see device.
Any ideas for help?
Thanks a lot!
Regards,
Dice.
dice_man said:
Hello,
I have a problem with my Lenovo. After updating my Lenovo K910 died - it wont boot. Shows Lenovo Logo and hang.
Reseting to factory default doesn't take effect.
I want to install new firmware, but it dont have SD slot, fastboot doesn't see device.
Any ideas for help?
Thanks a lot!
Regards,
Dice.
Click to expand...
Click to collapse
Did you find any solution my friend? I have the same problem. I tried to install the latest 4.4.2 ROM and now i'm stuck in Lenovo logo...
Hello,
After many attempts Lenovo start fastboot mode...
You must hold power and volume down and get blue screen with restore options - then I succes fastboot.
Hold thums for you.
TomTomarin said:
Did you find any solution my friend? I have the same problem. I tried to install the latest 4.4.2 ROM and now i'm stuck in Lenovo logo...
Click to expand...
Click to collapse
Did you download it correctly? If you have finished download it open the file to check the file corrupted or not. Then you can flash it.
Sent from my Lenovo K910 using xda app-developers app
Problem with ROM 1423
Hi all,
I downloaded Vibe UI 1.5 1423, specifically the new chinese ROM called "CSROM--V1.7". Followed the qsb downgrade method and it worked like a charm but I realized that it had root but not google apps.
A while later, I decided to flash it again with gapps, in particular pa_gapps-modular-mini-4.4.2-20140421-signed ones. And surprisingly, when my K910 booted the SettingsWizard apk was continuosly FC'ing (I meant force closing, but you know it is very annoying...).
I want somebody who has any idea of frameworks and developing to comment if there is a solution for that ROM to be installed.
I am not able to post in the development zone, as I havent yet got privileges. Hope somebody could help... that ROM is the best I've ever seen for this device.
Anyone?
Enviado desde mi Lenovo K910 mediante Tapatalk
Problems to flash 4.4.2 ROM
Hi there!!!
Could anyone help me to flash the ROM 4.4.2 on my lenovo vibe Z please (dual sim, no LTE, no external sd card enabled, current ROM : VIBEROM_V1.0_1407_2_ST_K910; android version 4.2.2)
I have tried many times the following two flashing methods, obtaining every time the same errors.
1- When I tried to flash the ROM 4.4.2 from the website needrom.com (LENOVO K910 VibeUI - 1421) through CWM recovery method (placing the rom on the root of the internal sd card of the phone) selecting installing from .zip in the recovery menu, the installation starts but it fails seconds after; then the screen shows:
Installing update
This package is for "kiton" devices: this is K910
E: Error in /temp/update.zip
(status 7)
Installation aborted
Its worth it to tell you that I tried to flash the rom by means of the sideloader there were no problems loading the rom.zip to the phone, when it started to install it, the process was aborted , presenting the same error presented above.
2- I also tried to perform a SD update to flash a former rom version... I do not really remember which one (it has a 226 on its name... a file with extension qsb) the error I got is as follows
SD Update
Dev: Internal Sdcard
Error: File size error
I would be very grateful if someone could help me to flash the rom ... give me some explanations on how to do it ... what other options I have got to do the flashing... etc
Thanks in advance
R
k910 wont boot
I think I may have bricked my phone. After trying to install 4.4.2 my phone won't boot. It just shows the Lenovo logo. Holding volume down and power button doesn't work either. When I connect my phone to a computer via USB I can use fastboot commands. When I try to boot into recovery using "fastboot boot recovery.img" it says FAILED (remote: Locked). Anyone have any idea what I could do?
ricschulz said:
Hi there!!!
Could anyone help me to flash the ROM 4.4.2 on my lenovo vibe Z please (dual sim, no LTE, no external sd card enabled, current ROM : VIBEROM_V1.0_1407_2_ST_K910; android version 4.2.2)
I have tried many times the following two flashing methods, obtaining every time the same errors.
1- When I tried to flash the ROM 4.4.2 from the website needrom.com (LENOVO K910 VibeUI - 1421) through CWM recovery method (placing the rom on the root of the internal sd card of the phone) selecting installing from .zip in the recovery menu, the installation starts but it fails seconds after; then the screen shows:
Installing update
This package is for "kiton" devices: this is K910
E: Error in /temp/update.zip
(status 7)
Installation aborted
Its worth it to tell you that I tried to flash the rom by means of the sideloader there were no problems loading the rom.zip to the phone, when it started to install it, the process was aborted , presenting the same error presented above.
2- I also tried to perform a SD update to flash a former rom version... I do not really remember which one (it has a 226 on its name... a file with extension qsb) the error I got is as follows
SD Update
Dev: Internal Sdcard
Error: File size error
I would be very grateful if someone could help me to flash the rom ... give me some explanations on how to do it ... what other options I have got to do the flashing... etc
Thanks in advance
R
Click to expand...
Click to collapse
did you find solution for that
"This package is for "kiton" devices"
i coudlnt update to kitkat also, with this error.
ricschulz said:
Could anyone help me to flash the ROM 4.4.2 on my lenovo vibe Z please
Click to expand...
Click to collapse
You probably have to flash the original 4.2.2. first, then follow the instructions on baralajbi's page.
Android 4.4.2
$275.99
wuna.ru
Keyboard
I just installed 4.4.2 (1503) and now there is no swipe function on the keyboard? Do anyone know what happened to it? Can't seem to find it in the settings either
Ugglaimossen said:
I just installed 4.4.2 (1503) and now there is no swipe function on the keyboard? Do anyone know what happened to it? Can't seem to find it in the settings either
Click to expand...
Click to collapse
ok I found it. Had to install Google keyboard and local keyboard layout. Now it works! *happy man* ☺
Sent from my Lenovo K910 using Tapatalk
hi guys m a utter noob about porting n this is the first time i will try doing it i have rooted phones flashed custom ROMs etc etc
now i got a new Xolo Q700s i wanna port Cherry mobile Fuze ROM on it can i do it ? the oonly difference is the front cam and the battery both have same MT6582M 1GB RAM 8 MP camera screen res and another thing is i cant get the stock rom for Q700S anyway online can someone point me a way where i can get the system boot recovery etc .img files ???
BUMP!!!!!!!
Tarun93 said:
hi guys m a utter noob about porting n this is the first time i will try doing it i have rooted phones flashed custom ROMs etc etc
now i got a new Xolo Q700s i wanna port Cherry mobile Fuze ROM on it can i do it ? the oonly difference is the front cam and the battery both have same MT6582M 1GB RAM 8 MP camera screen res and another thing is i cant get the stock rom for Q700S anyway online can someone point me a way where i can get the system boot recovery etc .img files ???
Click to expand...
Click to collapse
Without the stock rom, it is so risky to test custom roms, almost impossible.
But if you can flash TWRP or CWM, you can backup your stock rom to restore everytime you fail.
I suggest you to find the custom recovery first.
Use this Mobile Uncle Tools (MTK tools) to flash custom recovery, the most easy way to flash recovery for MTK devices. If you want to know how to use it, go to www.kokoandroid.weebly.com and follow the step 2,3 and 5.
Good Luck in porting rom. :fingers-crossed:
Sithu Htun said:
Without the stock rom, it is so risky to test custom roms, almost impossible.
But if you can flash TWRP or CWM, you can backup your stock rom to restore everytime you fail.
I suggest you to find the custom recovery first.
Use this Mobile Uncle Tools (MTK tools) to flash custom recovery, the most easy way to flash recovery for MTK devices. If you want to know how to use it, go to www.kokoandroid.weebly.com and follow the step 2,3 and 5.
Good Luck in porting rom. :fingers-crossed:
Click to expand...
Click to collapse
could not find cwm for my phone so did a self mod and got CWM working in the q700s made a backup of my Stock rom which can be flashed with sp flasher n not i m off for porting thanx for the help anyways
Tarun93 said:
could not find cwm for my phone so did a self mod and got CWM working in the q700s made a backup of my Stock rom which can be flashed with sp flasher n not i m off for porting thanx for the help anyways
Click to expand...
Click to collapse
Please Help!
After trying to do a partition on my Cherry Mobile Thunder ( a.k.a. MicromaxA91) (2GB of 4GB internal), then I tried to restore factory settings to complete the partition, when It restarted It got stuck in the bootlogo, I got it bricked, Tried to flash my stock rom with TWRP, it failed, Cleared Cache - Failed, Cleared Dalvik Cache Wipe - Failed, tried to Reboot & Restore Factory Settings - still Fails and Prompts " No OS Found, Continue Reboot?" then asks for installing SU, FAILED, Tried to Flash it with ADB - but just pompts "waiting for device" I'm running out of options PLEASE HELP!
capc1989 said:
Please Help!
After trying to do a partition on my Cherry Mobile Thunder ( a.k.a. MicromaxA91) (2GB of 4GB internal), then I tried to restore factory settings to complete the partition, when It restarted It got stuck in the bootlogo, I got it bricked, Tried to flash my stock rom with TWRP, it failed, Cleared Cache - Failed, Cleared Dalvik Cache Wipe - Failed, tried to Reboot & Restore Factory Settings - still Fails and Prompts " No OS Found, Continue Reboot?" then asks for installing SU, FAILED, Tried to Flash it with ADB - but just pompts "waiting for device" I'm running out of options PLEASE HELP!
Click to expand...
Click to collapse
download sp flash tool from HERE
download the stock rom for your phone which can be flashed via sp flash tools
for more info here a link that might help you
http://forum.xda-developers.com/showthread.php?t=1982587
hope that helped pal
\I didn't work it, what should I do??
Hello guys, i'm new on the world of Android and i need a little help. I'm newbie but i learn fast.
I got a new phone with android 4.4.2 China honor 3 (fake), after uninstalling some China app the operation system started to stuck at logo at the start.
So to solve the problem i red that i could restore the old OS using ROM file. The factory where i bought the phone sent me the official ROM file for my phone.
Now i entered on Recovery mode, first i did "wipe data/factory reset", then with ADB i loaded the file .zip "adb sideload update.zip". But how the file is uploaded it says "Installation aborted", without any error.
So now i need your help how can i restore this system... I tried also to buy an SD card 8 gb and upload the file on the SD, but same error.
Thank you for your help!
Bump! Need help guys
SUMMARY:
I unistalled wrongly MIUI (MiHome app) and the phone stopped working correctly.
Phone is a fake honor 3c with MTK 65xx processor.
1 - Phone doesnt load the main theme, after the android logo i see a black page. (i see the top bar where there are wifi, time etc)
2 - The phone is not rooted. (i think)
3 - I can enter in Restore Mode and Factory Mode.
4 - I got the official ROM file. (the factory gave me it)
5 - All file zip (that i try to use in recovery from SD or ADB) give me "Installation aborted" without any error.
6 - I haven't USB DEBUG enabled, and i can't enable it cause i can't load the Operation system.
Stuck on BootLoop
I am currently facing the same Issue i changed the system/framework (of the CHERRY MOBILE JELLY) with the folder of the SamsungS5 system/framework
cause I was thinking that it'll worked too after changing the system/media of my phone
PLEASE HELP
GUYS
Download and flash the stock ROM with SP flash tools....to will solve all the problems...
the best place to go for any rom for china phones is needrom just google it. I had a jiake v8 phone and this was the only place where i was able to find rom for my phone. good luck ....
I face the same prob!
I have a canvas 2.2 a114 which I bought a few days back . I had been using it very smoothly(not rooted and is new). But suddenly it started to reboot and was stuck at the canvas logo. I have the rom file, but it simply says "Installaton aborted when I load the zip file. help plz! Thanx.
guys the best way to do this is to go to youtube. Find how to port rom to mtk devices or china phones there are plenty of videos. It will be much easier for you to do something when you see how someone is doing it and then you do it for yourself. I have a jiake v8 pphone and this is what i did is not that easy to explain much easier to see.
you can try reflashing the stock rom (You May not lose data) or you can install the stock recovery
Fixed
BrendanWk said:
you can try reflashing the stock rom (You May not lose data) or you can install the stock recovery
Click to expand...
Click to collapse
I was fed up at last and i sent it off to micromax center. They said it was a software prob.
---------- Post added at 09:55 AM ---------- Previous post was at 09:47 AM ----------
Guys I finally figured out (I am new to the android family) that i should install a custom recoery inorder to flash roms. I cant flash roms in stock recovery.
I have an Asus Padfone 2 A68 JP version upgraded to Kitkat 4.4.2 via asus.com :highfive:
I am unhappy with the upgrade :crying: to my personal experience, the ZenUI interface is not very appealing
1st, it is not user friendly looking for apps, customizing desktop apps and widgets are not that special :fingers-crossed:
2nd, battery drains a lot faster that it used to be
3rd, wifi is problematic, can't make my phone connect to Google Play Store when phone is connected to my laptop, it says no internet when in fact it is :crying:
Can anyone please advise how can a Padfone 2 upgraded to Kitkat be downgraded? I tried the normal way, copying the JP_PadFone2-user-10_4_17_7-UpdateLauncher.zip file on to sd folder Asus\Update, phone notification appears saying there is an update available, but installation fails, obviously because of newer system and read-only files existing.
My Padfone 2 Kitkat is towel-rooted. I only use stock recovery, no CWM or TWRP, not yet. I will try to be cautious this time :angel: I just got back my A66 Padfone 1 from Taiwan for service repair, because it was bricked while I was installing CWM/TWRP.
Any expert advise is highly appreciated. Thanks
you still having a issue ?
try that method
Download original firmware asus webiste. (android 4.1)
unzip it once .
file called 10.............ota.user.zip (at least with ppadfone infinity)
put it on your sd card
if you done disconnect from computer
then it should be a triangle in notification bar upgrade found or something like that if not restart phone and then it should be there.
press ok and wait phone to upgrade/dowgrade.
I hope it wortks.
I have a WW ROM but basically facing the same problem. Still looking for help...
I've spent 2 days researching and trying stuff out until today. I have finally downgraded my Padfone 2 from Android 4.4.2 (KOT49H.WW_PadFone-11.8.4.12-20140804 te) to Android 4.1.1 (GuerillaROM-v1.6_OFFICIAL912014).
GuerillaROM looks just like PF2's stock 4.1.1 and it's awesome for me because 4.4.2 was... aesthetically unappealing.
Anyhow, this is my story, don't know if it will work for you, but it worked for me.
- in step 2 I accidentally erased my files, so... back your files up on a PC.
Don't hold me responsible for anything that happens to your phone, do stuff on your own risk. Guys who do this stuff (not me) have made these procedures as simple as they could, so that the end users (we) could **** our phones up as little as possible. These procedures have minimal risk, but the risk is still there.
1. UnLock (unlock Bootloader)
- got from Asus.com (http://support.asus.com/Download.aspx?SLanguage=en&m=PadFone+2&p=29&s=1)
(OS: Android --> Utilities --> "Unlock Device App: Unlock boot loader")
- worked now. Didn't work a year ago, don't know why
2. Followed directions from theunlockr.com (http://theunlockr.com/2013/06/09/how-to-root-the-asus-padfone-2/)
- has done me a factory reset (all data wiped) on 4.4.2 + installed SU
- Root Checker: Failed
- Root Checker is an app from Play Store
- stopped at step III 8 because Root Checker didn't verify
- don't know if matters, but I installed
drivers for bootloader from Asus.com (http://support.asus.com/Download.aspx?SLanguage=en&m=PadFone+2&p=29&s=1)
OS: Other --> USB
2a. I also downloaded adb (http://forum.xda-developers.com/showthread.php?t=2588979)
but turns out I didn't need it.
3. went to hexamob.com, found "Android Rooting Method: Towelroot"
- http://hexamob.com/how-to-root/android-rooting-method-towelroot/
- followed that
4. Made it ra1n b^.^d
5. Root Checker: Pass
6. Installed TWRP Manager
- from Play Store
7. Installed TWRP recovery 2.6.3.0
- the later ones didn't work
- the earlier ones messed with SU
- try for yourself
8. Got SuperSU (#) from Play Store
9. Updated it for TWRP/CWM
- (reboot - running open recovery script)
10. Installed GuerillaMOD
- followed from xda
- http://forum.xda-developers.com/showthread.php?t=2268613
11. White ASUS logo freeze (like xda said it could)
12. After 2 or 3 forced reboots
magically unfroze after awhile (~2mins)
- don't ask me how or why
- don't count on it magically unfreezing (there's a solution for that freeze on that thread (in the FAQ))
-------------------------------------------------------------------------------------
wannab.phd said:
I've spent 2 days researching and trying stuff out until today. I have finally downgraded my Padfone 2 from Android 4.4.2 (KOT49H.WW_PadFone-11.8.4.12-20140804 te) to Android 4.1.1 (GuerillaROM-v1.6_OFFICIAL912014).
GuerillaROM looks just like PF2's stock 4.1.1 and it's awesome for me because 4.4.2 was... aesthetically unappealing.
Anyhow, this is my story, don't know if it will work for you, but it worked for me.
- in step 2 I accidentally erased my files, so... back your files up on a PC.
Don't hold me responsible for anything that happens to your phone, do stuff on your own risk. Guys who do this stuff (not me) have made these procedures as simple as they could, so that the end users (we) could **** our phones up as little as possible. These procedures have minimal risk, but the risk is still there.
1. UnLock (unlock Bootloader)
- got from Asus.com (http://support.asus.com/Download.aspx?SLanguage=en&m=PadFone+2&p=29&s=1)
(OS: Android --> Utilities --> "Unlock Device App: Unlock boot loader")
- worked now. Didn't work a year ago, don't know why
2. Followed directions from theunlockr.com (http://theunlockr.com/2013/06/09/how-to-root-the-asus-padfone-2/)
- has done me a factory reset (all data wiped) on 4.4.2 + installed SU
- Root Checker: Failed
- Root Checker is an app from Play Store
- stopped at step III 8 because Root Checker didn't verify
- don't know if matters, but I installed
drivers for bootloader from Asus.com (http://support.asus.com/Download.aspx?SLanguage=en&m=PadFone+2&p=29&s=1)
OS: Other --> USB
2a. I also downloaded adb (http://forum.xda-developers.com/showthread.php?t=2588979)
but turns out I didn't need it.
3. went to hexamob.com, found "Android Rooting Method: Towelroot"
- http://hexamob.com/how-to-root/android-rooting-method-towelroot/
- followed that
4. Made it ra1n b^.^d
5. Root Checker: Pass
6. Installed TWRP Manager
- from Play Store
7. Installed TWRP recovery 2.6.3.0
- the later ones didn't work
- the earlier ones messed with SU
- try for yourself
8. Got SuperSU (#) from Play Store
9. Updated it for TWRP/CWM
- (reboot - running open recovery script)
10. Installed GuerillaMOD
- followed from xda
- http://forum.xda-developers.com/showthread.php?t=2268613
11. White ASUS logo freeze (like xda said it could)
12. After 2 or 3 forced reboots
magically unfroze after awhile (~2mins)
- don't ask me how or why
- don't count on it magically unfreezing (there's a solution for that freeze on that thread (in the FAQ))
-------------------------------------------------------------------------------------
Click to expand...
Click to collapse
Thanks. mate, very nice work. I will try your guide as soon as I have the chance, although not too soon because at present my phone is linked to many of my online bank requisites.
Your share is well appreciated.
explorer2612 said:
Thanks. mate, very nice work. I will try your guide as soon as I have the chance, although not too soon because at present my phone is linked to many of my online bank requisites.
Your share is well appreciated.
Click to expand...
Click to collapse
hello can you please put a link to download : JP_PadFone2-user-10_4_17_7 (stock rom the official one ) and thanks
wasim74 said:
hello can you please put a link to download : JP_PadFone2-user-10_4_17_7 (stock rom the official one ) and thanks
Click to expand...
Click to collapse
asus.com/Tablets_Mobile/PadFone_2_A68/HelpDesk_Download/
Under OS select Android and then under Firmware find what you need.
Need your help please
wannab.phd said:
asus.com/Tablets_Mobile/PadFone_2_A68/HelpDesk_Download/
Under OS select Android and then under Firmware find what you need.
Click to expand...
Click to collapse
I HAVE ASUS PADFONE 2 suddenly WHEN I WAS SEARCHING ON GOOGLE ITS SHOW ME ( unfortunately google app has stopped ) AND STOCK THERE SO I DID RESET AFTER THAT THE PHONE ITS STOCK ON BOOTING UP ASUS LOGO AND AFTER 15 MINT ITS PASS THE BOOT LOGO AND ITS SHOW ME ON THE TOP ( ENCRYPTION UNSUCCESSFUL ) AND ON THE BOTTOM ( RESET PHONE ) BUT WHEN I HIT ON RESET PHONE IT DOES NOT DOING ANYTHING THE PHONE ITS ( UNROOTED ) AND IT WAS RUNNING ANDROID JELLY JEAN ( 4.1) AND I CAN GET INTO STOCK RECOVERY AND I DID WIPE DATA/ FACTORY RESET AND WIPE CACHE PARTITION BUT STILL STOCK ON BOOT LOGO AND NOT BOOTING NORMALLY AFTER I USED ( ADB BOOT LOADER ) AND TRIED TO FLASH A NEW FIRMWARE BY USING ( CWM RECOVERY6.0.2.9 ) I DIDNT FLASH THE CWM RECOVERY JUST USED THE IMG RECOVERY TO FLASH THE FIRMWARE ( INSTALL ZIP FROM SIDELOAD ) AND I SENT THE FIRMWARE TO MY PHONE BUT THE CWM RECOVERY COULDN'T FLASH IT ( UNSUCCESSFUL ) BECAUSE CWM RECOVERY ITS GAVE ME EVERY TIME ( E: CANT MOUNT ) ANYTHING I DID WITH CWM RECOVERY IT DOES NOT WORK SO I NEED YOUR HELP GUYS PLEASE ANYBODY CAN HELP ME WITH THAT I WILL BE APPRECIATED AND THANK YOU PLEASE HELP NOTE : I DONT KNOW WHAT IS THE BUILD NUMBER ON MY PHONE BUT I BOUGHT IT FROM TAIWAN .... HEY GUYS CHECK THE PICS PLEASE WHICH I POSTED AND THANKS
EDIT : I WAS USED CWM:6.0.2.9 I TRIED OVER 20 TIMES WITHOUT ANY SUCCEED (UNSUCCESSFUL) AS SHOWN IN THE PICTURES WHICH I POSTED ALREADY I TRIED ALL THESE ROMS : TW_A68-11.8.4.12-0-ota-user.zip ,TW_A68-11.8.4.6-0-ota-user.zip,WW_A68-11.8.4.23-0-ota-user.zip,CHT_A68-11.8.3.3-0-ota-user.zip,CN_A68-10.4.17.7-0-ota-user.zip,HK_A68-10.4.17.7-0-ota-user.zip,TW_A68-11.8.4.23-0-ota-user.zip ,,, I TRIED ALL THESE ROMS BECAUSE I DONT KNOW WHAT IT WAS MY ( BUILD NUMBER ) I CANT REMEMBER I JUST KNOW IT WAS JELLY BEAN 4.1 AND MY PADFONE 2 MODEL A68 IT WAS NOT ROOTED IT HAS STUCK FIRMWARE AND HAS ( LOCKED BOOTLOADER ) AND I TRIED TOO : adb push firmware.zip /data/media for example :adb push TW_A68-11.8.4.23-0-ota-user.zip /data/media and i pushed already to my external storage because there is no memory card on this phone (sdcard) using the stock recovery and when i tried to install the update from the /data/media it shows : install update and after 15 mint it gave me installation aborted and i wanna tell you something else the CWM RECOVERY WHEN I USED IT I DIDNT FLASH IT I JUST BOOT LIKE TESTED :fastboot boot recover.img because i dont know if i can flash it or not because my phone its ( not rooted ) ,,, I TRIED ALL THE TW : ROMS WHICH I SENT IT TO YOU ALREADY ABOVE AND I DOWNLOAD THESE ROMS FROM ASUS WEBSITE FIRMWARES ,, AND I SENT THE ROMS USING THE SIDELOAD TO MY PHONE AND IM NOT FLASHING THE CWM ON MY PHONE BECUSE MY PHONE ITS NOT ROOTED AND THE BOOTLOADER ITS LOCKED I JUST LET CWM TO BOOT ON MY PHONE NOT FLASH IT AND WHEN I TRIED TO INSTALL THE UPDATE USING CWM ITS GAVE ME ( INSTALLATION ABORTED ) STATUS 7 ERROR ,,,, i tried fastboot and sideload i have no problem with that i can send the roms to my phone but the problem my phone cant flash it ,,,, just to let you know when i used the cwm 6.0.2.9 i cant do wipe -factory reset or wipe cashe its gave me e: cnt mount but on stock recovery i can do wipe cashe and factory reset but it take too long to do that ,,,,,,, i have problem with flashing the recovery { fastboot flash recovery recovery.img } i dont know why and i tried to just boot the recovery img for test : fastboot boot boot recovery.img i tried it with twrp and its show me just the picture TEAM WIN BUT ITS NOT FUNCTIONAL ,,, HELP PLEASE:crying
My problem provided with pictures REALLY NEED ANY HELP
wasim74 said:
i have asus padfone 2 suddenly when i was searching on google its show me ( unfortunately google app has stopped ) and stock there so i did reset after that the phone its stock on booting up asus logo and after 15 mint its pass the boot logo and its show me on the top ( encryption unsuccessful ) and on the bottom ( reset phone ) but when i hit on reset phone it does not doing anything the phone its ( unrooted ) and it was running android jelly jean ( 4.1) and i can get into stock recovery and i did wipe data/ factory reset and wipe cache partition but still stock on boot logo and not booting normally after i used ( adb boot loader ) and tried to flash a new firmware by using ( cwm recovery6.0.2.9 ) i didnt flash the cwm recovery just used the img recovery to flash the firmware ( install zip from sideload ) and i sent the firmware to my phone but the cwm recovery couldn't flash it ( unsuccessful ) because cwm recovery its gave me every time ( e: Cant mount ) anything i did with cwm recovery it does not work so i need your help guys please anybody can help me with that i will be appreciated and thank you please help note : I dont know what is the build number on my phone but i bought it from taiwan .... Hey guys check the pics please which i posted and thanks
edit : I was used cwm:6.0.2.9 i tried over 20 times without any succeed (unsuccessful) as shown in the pictures which i posted already i tried all these roms : Tw_a68-11.8.4.12-0-ota-user.zip ,tw_a68-11.8.4.6-0-ota-user.zip,ww_a68-11.8.4.23-0-ota-user.zip,cht_a68-11.8.3.3-0-ota-user.zip,cn_a68-10.4.17.7-0-ota-user.zip,hk_a68-10.4.17.7-0-ota-user.zip,tw_a68-11.8.4.23-0-ota-user.zip ,,, i tried all these roms because i dont know what it was my ( build number ) i cant remember i just know it was jelly bean 4.1 and my padfone 2 model a68 it was not rooted it has stuck firmware and has ( locked bootloader ) and i tried too : Adb push firmware.zip /data/media for example :adb push tw_a68-11.8.4.23-0-ota-user.zip /data/media and i pushed already to my external storage because there is no memory card on this phone (sdcard) using the stock recovery and when i tried to install the update from the /data/media it shows : Install update and after 15 mint it gave me installation aborted and i wanna tell you something else the cwm recovery when i used it i didnt flash it i just boot like tested :fastboot boot recover.img because i dont know if i can flash it or not because my phone its ( not rooted ) ,,, i tried all the tw : Roms which i sent it to you already above and i download these roms from asus website firmwares ,, and i sent the roms using the sideload to my phone and im not flashing the cwm on my phone becuse my phone its not rooted and the bootloader its locked i just let cwm to boot on my phone not flash it and when i tried to install the update using cwm its gave me ( installation aborted ) status 7 error ,,,, i tried fastboot and sideload i have no problem with that i can send the roms to my phone but the problem my phone cant flash it ,,,, just to let you know when i used the cwm 6.0.2.9 i cant do wipe -factory reset or wipe cashe its gave me e: Cnt mount but on stock recovery i can do wipe cashe and factory reset but it take too long to do that ,,,,,,, i have problem with flashing the recovery { fastboot flash recovery recovery.img } i dont know why and i tried to just boot the recovery img for test : Fastboot boot boot recovery.img i tried it with twrp and its show me just the picture team win but its not functional ,,, help please:crying
Click to expand...
Click to collapse
i wish you can help me with what i have to do i tried too many things without any succeed
HELP
wasim74 said:
i wish you can help me with what i have to do i tried too many things without any succeed
Click to expand...
Click to collapse
another picture shown my bootloader information
Hi all, I need downgrade my Asus a68 from 4.4. to 4.1. Please someone help me 4.1 firmwares. Thanks
Mickey Mouse said:
Hi all, I need downgrade my Asus a68 from 4.4. to 4.1. Please someone help me 4.1 firmwares. Thanks
Click to expand...
Click to collapse
Follow this post.
Hi! Sorry for my English, Russian I am writing to you through Google translator)))
problem as follows:
It was a piercing VVE 442? after about half a year longer to work on their own touch-sensitive keys below the screen (back, home, and applications).
to reset to the factory did not help, did hard reset did not help,
He rolled to vve411. everything worked, I decided to put back the WWE 442, okay flashed, but the buttons again have earned, had to revert to 411. 442 would be desirable but for some reason he is not working or rather not work touch-sensitive buttons, and tried to put other regions but to no avail. help vchem washes be the problem?
Hi everyone,
I recently bought a lenovo tab 2 a10-30f and it has got itself in a bootloop.I have tried to factory reset,wipe cache ,install new recovery image and reflash stock rom with no solution.When I tried to flash the ROM it came up with a status 7 error which I tried to fix but when I went to the updater script it had no assert field in which I could delete.The tablet has now refused to even enter recovery mode in which I hoped to use adb to manually flash the ROM instead of SD card but it won't work.
Please help as I'm stuck
I do not have cwm or twrp so any help will do
Physiwiz said:
Hi everyone,
I recently bought a lenovo tab 2 a10-30f and it has got itself in a bootloop.I have tried to factory reset,wipe cache ,install new recovery image and reflash stock rom with no solution.When I tried to flash the ROM it came up with a status 7 error which I tried to fix but when I went to the updater script it had no assert field in which I could delete.The tablet has now refused to even enter recovery mode in which I hoped to use adb to manually flash the ROM instead of SD card but it won't work.
Please help as I'm stuck
I do not have cwm or twrp so any help will do
Click to expand...
Click to collapse
Here is help and guide.
https://forum.xda-developers.com/showpost.php?p=70370823&postcount=17