Hi everyone,
I recently bought a lenovo tab 2 a10-30f and it has got itself in a bootloop.I have tried to factory reset,wipe cache ,install new recovery image and reflash stock rom with no solution.When I tried to flash the ROM it came up with a status 7 error which I tried to fix but when I went to the updater script it had no assert field in which I could delete.The tablet has now refused to even enter recovery mode in which I hoped to use adb to manually flash the ROM instead of SD card but it won't work.
Please help as I'm stuck
I do not have cwm or twrp so any help will do
Physiwiz said:
Hi everyone,
I recently bought a lenovo tab 2 a10-30f and it has got itself in a bootloop.I have tried to factory reset,wipe cache ,install new recovery image and reflash stock rom with no solution.When I tried to flash the ROM it came up with a status 7 error which I tried to fix but when I went to the updater script it had no assert field in which I could delete.The tablet has now refused to even enter recovery mode in which I hoped to use adb to manually flash the ROM instead of SD card but it won't work.
Please help as I'm stuck
I do not have cwm or twrp so any help will do
Click to expand...
Click to collapse
Here is help and guide.
https://forum.xda-developers.com/showpost.php?p=70370823&postcount=17
Related
Greetings,
dear all,
in the process of updating to jelly been from the ginger bread os i installed the cwm 5.x.x version and rooted after that i took complete backup then i have installed the jellybeen with doomnex rom or somthing once it is installed after restarting the deivce it started recovery loop and was getting the error e:drive/cache can't mount so then i tried to restore then also same message i tried and found latest cwm ver 6.x.x untouch installed over it thats it it is completely in unworakble condition options ar showing but no option can be selected just moving ther cursor up and down i cant enter any option neither booting
so kindly help me how can i fix this problem to restore to working state
waiting for your kind favour
thanks
If you are in Recovery - Loop, I think you have to flash a new Bootloader. Instructions and Files
Hello,
I have a problem with my Lenovo. After updating my Lenovo K910 died - it wont boot. Shows Lenovo Logo and hang.
Reseting to factory default doesn't take effect.
I want to install new firmware, but it dont have SD slot, fastboot doesn't see device.
Any ideas for help?
Thanks a lot!
Regards,
Dice.
dice_man said:
Hello,
I have a problem with my Lenovo. After updating my Lenovo K910 died - it wont boot. Shows Lenovo Logo and hang.
Reseting to factory default doesn't take effect.
I want to install new firmware, but it dont have SD slot, fastboot doesn't see device.
Any ideas for help?
Thanks a lot!
Regards,
Dice.
Click to expand...
Click to collapse
Did you find any solution my friend? I have the same problem. I tried to install the latest 4.4.2 ROM and now i'm stuck in Lenovo logo...
Hello,
After many attempts Lenovo start fastboot mode...
You must hold power and volume down and get blue screen with restore options - then I succes fastboot.
Hold thums for you.
TomTomarin said:
Did you find any solution my friend? I have the same problem. I tried to install the latest 4.4.2 ROM and now i'm stuck in Lenovo logo...
Click to expand...
Click to collapse
Did you download it correctly? If you have finished download it open the file to check the file corrupted or not. Then you can flash it.
Sent from my Lenovo K910 using xda app-developers app
Problem with ROM 1423
Hi all,
I downloaded Vibe UI 1.5 1423, specifically the new chinese ROM called "CSROM--V1.7". Followed the qsb downgrade method and it worked like a charm but I realized that it had root but not google apps.
A while later, I decided to flash it again with gapps, in particular pa_gapps-modular-mini-4.4.2-20140421-signed ones. And surprisingly, when my K910 booted the SettingsWizard apk was continuosly FC'ing (I meant force closing, but you know it is very annoying...).
I want somebody who has any idea of frameworks and developing to comment if there is a solution for that ROM to be installed.
I am not able to post in the development zone, as I havent yet got privileges. Hope somebody could help... that ROM is the best I've ever seen for this device.
Anyone?
Enviado desde mi Lenovo K910 mediante Tapatalk
Problems to flash 4.4.2 ROM
Hi there!!!
Could anyone help me to flash the ROM 4.4.2 on my lenovo vibe Z please (dual sim, no LTE, no external sd card enabled, current ROM : VIBEROM_V1.0_1407_2_ST_K910; android version 4.2.2)
I have tried many times the following two flashing methods, obtaining every time the same errors.
1- When I tried to flash the ROM 4.4.2 from the website needrom.com (LENOVO K910 VibeUI - 1421) through CWM recovery method (placing the rom on the root of the internal sd card of the phone) selecting installing from .zip in the recovery menu, the installation starts but it fails seconds after; then the screen shows:
Installing update
This package is for "kiton" devices: this is K910
E: Error in /temp/update.zip
(status 7)
Installation aborted
Its worth it to tell you that I tried to flash the rom by means of the sideloader there were no problems loading the rom.zip to the phone, when it started to install it, the process was aborted , presenting the same error presented above.
2- I also tried to perform a SD update to flash a former rom version... I do not really remember which one (it has a 226 on its name... a file with extension qsb) the error I got is as follows
SD Update
Dev: Internal Sdcard
Error: File size error
I would be very grateful if someone could help me to flash the rom ... give me some explanations on how to do it ... what other options I have got to do the flashing... etc
Thanks in advance
R
k910 wont boot
I think I may have bricked my phone. After trying to install 4.4.2 my phone won't boot. It just shows the Lenovo logo. Holding volume down and power button doesn't work either. When I connect my phone to a computer via USB I can use fastboot commands. When I try to boot into recovery using "fastboot boot recovery.img" it says FAILED (remote: Locked). Anyone have any idea what I could do?
ricschulz said:
Hi there!!!
Could anyone help me to flash the ROM 4.4.2 on my lenovo vibe Z please (dual sim, no LTE, no external sd card enabled, current ROM : VIBEROM_V1.0_1407_2_ST_K910; android version 4.2.2)
I have tried many times the following two flashing methods, obtaining every time the same errors.
1- When I tried to flash the ROM 4.4.2 from the website needrom.com (LENOVO K910 VibeUI - 1421) through CWM recovery method (placing the rom on the root of the internal sd card of the phone) selecting installing from .zip in the recovery menu, the installation starts but it fails seconds after; then the screen shows:
Installing update
This package is for "kiton" devices: this is K910
E: Error in /temp/update.zip
(status 7)
Installation aborted
Its worth it to tell you that I tried to flash the rom by means of the sideloader there were no problems loading the rom.zip to the phone, when it started to install it, the process was aborted , presenting the same error presented above.
2- I also tried to perform a SD update to flash a former rom version... I do not really remember which one (it has a 226 on its name... a file with extension qsb) the error I got is as follows
SD Update
Dev: Internal Sdcard
Error: File size error
I would be very grateful if someone could help me to flash the rom ... give me some explanations on how to do it ... what other options I have got to do the flashing... etc
Thanks in advance
R
Click to expand...
Click to collapse
did you find solution for that
"This package is for "kiton" devices"
i coudlnt update to kitkat also, with this error.
ricschulz said:
Could anyone help me to flash the ROM 4.4.2 on my lenovo vibe Z please
Click to expand...
Click to collapse
You probably have to flash the original 4.2.2. first, then follow the instructions on baralajbi's page.
Android 4.4.2
$275.99
wuna.ru
Keyboard
I just installed 4.4.2 (1503) and now there is no swipe function on the keyboard? Do anyone know what happened to it? Can't seem to find it in the settings either
Ugglaimossen said:
I just installed 4.4.2 (1503) and now there is no swipe function on the keyboard? Do anyone know what happened to it? Can't seem to find it in the settings either
Click to expand...
Click to collapse
ok I found it. Had to install Google keyboard and local keyboard layout. Now it works! *happy man* ☺
Sent from my Lenovo K910 using Tapatalk
Hi,
Last night my lenovo tab 2 a 7-10 got an update, i downloaded the update and proceed to restart and install it, the update failed at around 90% and the tab rebooted, its now stuck at recovery, factor reset/wiping cache did not help, im unable to flash a rom as SP Flash tools cant detect it even after installing all the necessary drivers and also when i press the volume down button when connecting to my PC, is it possible to flash a stock rom via recovery? if so, can anyone send me the link for the stock rom, should be a zip file i think? i have already download a stock rom from "forum.mytabletguru.com" but its in rar format and i cant flash it using SP flash tools as already mentioned before, thanks in advance
PS: im not an advanced user, so using ADB is out of the question, the tab is not rooted and lenovo service center is like a 100 miles away so its not an option
Edit: i was able to download the latest lollipop rom T2-A7-10F_S000044_ROW_TO_T2-A7-10F_S000054_150801_ROW_WC69.zip and successfully updated via recovery
same goes here bro..im also stucked ,but mine was rooted ,now its showing error ,i tried wipedata/factory reset ,,,not worked
same here.
hasi6764 said:
same goes here bro..im also stucked ,but mine was rooted ,now its showing error ,i tried wipedata/factory reset ,,,not worked
Click to expand...
Click to collapse
remedialguns said:
same here.
Click to expand...
Click to collapse
I have successfully flashed the stock lollipop rom, the steps are simple, download the rom, copy to ext sd card, boot into stock recovery, install from sd card and choose stock rom.zip, took about 10 minutes and drained a lot of battery, so i advice you to charge your tab before doing so.
Stock Rom link:
https://yadi.sk/d/E5xmV2lOiXPgc
Edit: this will remove root access
Bricked lenovo tab 2 A7 10f
Bricked lenovo tab 2 A7 10f
install vcom drivers
tool : SP FLASH TOOL
stock rom kitkat - lollipop
It doesn't work
Help me....
tablet not turn
tablet does not enter - recovery
Hi I have tried to flash CM 12.1 to my S3 mini, so i downloaded ROM, did backup (but it went wrong, i think it didnt fully back up) and wipe cache, data and davik. After that i wanted to flash my ROM, but error appeared, that Installation aborted. So I tried to restore backup but it said "MD5 mismatch" and if I try to reboot It goes to recovery mode everytime. I read that flashing rom can be aborted because of old CMW ( I have v6.0.2.7 ) and if you get the newest, installation is ok, but what can I do? I cannot go to normal boot to Android and if I connect my phone to PC it reacts, but as unknown device and I cant open storage of my phone, so I cant update CMW recovery to flash my ROM.
EDIT: Now i get into ADB and sideload, everything going well but when I tried to install rom it said * failed to write data 'protocol fault (couldn't read status): Invalid argument' *
*Bump* i have the same problem..... not getting any where with this can some one help me out ....
SOLVED! I flashed stock official samsung ROM throught ODIN and after I used TWRP recovery instead of CWM and flashed CM 12.1 .
Hello, I desperately need help updating my Samsung S3 Mini GT-i8190 - I have followed all the steps, the phone is rooted, I have CWM installed - Odin won't read my phone (have original cable) I installed Android Toolkit and still cannot install zip files:- I keep getting an error message when the files run. Running in download from sd card - invalid signature
Running on Toolkit - aosp5.0_golden.nova.20141106.zip "failed to write data protocol fault(couldn't read status): Invalid argument
Any help would be greatly appreciated
I recently bought a mipad and installed twrp v2.8.4. I was following this thread http://en.miui.com/thread-118294-1-1.html to merge the two system partitions. But after flashing the repartition zip file and restoring from previously made backup file i am stuck at the mi logo. When i go into recovery to install that zip file again it says E:block device not found,unable to mount /system. I cannot even wipe system. It says no OS. How to solve this problem?please help here.
I'm also facing the same problem. I've tried to flash all Custom/ Stock roms using all TWRP versions but nothing worked. Struck on MI LOGO.