Hello All,
I am trying to flash boot-loader and firmware into my hard bricked mobile "Zenfone 5" which has Intel Clovertrail plus Z2560 chipset.
I am using intel phone flash tool but the problem is xfstk is stuck in the loop of "Firmware download completed. Continuing to OS...". It is showing that firmware download is completed but instead of continuing to OS it is again flashing the firmware and this keep on going until the timeout reaches.
Please see the log file and explain me why this is happening and how to resolve this issue?
Guys,your help will be much appreciated, I am stuck with this issue for last 5 days.
Thanks
log:https://communities.intel.com/servlet/JiveServlet/download/324548-103694/xfstk.log.zip
rajarbind said:
Hello All,
I am trying to flash boot-loader and firmware into my hard bricked mobile "Zenfone 5" which has Intel Clovertrail plus Z2560 chipset.
I am using intel phone flash tool but the problem is xfstk is stuck in the loop of "Firmware download completed. Continuing to OS...". It is showing that firmware download is completed but instead of continuing to OS it is again flashing the firmware and this keep on going until the timeout reaches.
Please see the log file and explain me why this is happening and how to resolve this issue?
Guys,your help will be much appreciated, I am stuck with this issue for last 5 days.
Thanks
log:https://communities.intel.com/servlet/JiveServlet/download/324548-103694/xfstk.log.zip
Click to expand...
Click to collapse
It's look like you used stranger file to flash to ZenFone (i guess from Acer or Dell right?!) .Pls following http://23pin.logdown.com/posts/240975-zenfone-rescue-guide to rescue your phone. Goodluck[emoji1]
Sent from my ASUS_T00F using Tapatalk
Yes, I tried with all the possible firmware files which I found over the internet for clovertrail chipset. I have also triedthe files given in this link ( http://www.mediafire.com/folder/7qapfy4zqvxf6 ) under zenfone 5 folder which is mentioned in the article you recommended.
To my surprise I was able to completely load the firmware using the files of Lenovo K900,but obviously it didn't work as those were not meant for Zenfone 5. With all other files I am facing the same issue of looping "Firmware download completed. Continuing to OS...".
I beleive I am not using the right firmware files for my versions of Zenfone 5 which has clovertrail plus Z2560 chipset WW T00J Indian release. Please help with this issue?
Thanks
quanganh2627 said:
It's look like you used stranger file to flash to ZenFone (i guess from Acer or Dell right?!) .Pls following http://23pin.logdown.com/posts/240975-zenfone-rescue-guide to rescue your phone. Goodluck[emoji1]
Sent from my ASUS_T00F using Tapatalk
Click to expand...
Click to collapse
Help! I'm having problems same like you.
rajarbind said:
Hello All,
I am trying to flash boot-loader and firmware into my hard bricked mobile "Zenfone 5" which has Intel Clovertrail
plus Z2560 chipset.
I am using intel phone flash tool but the problem is xfstk is stuck in the loop of "Firmware download completed. Continuing to OS...". It is showing that firmware download is completed but instead of continuing to OS it is again flashing the firmware and this keep on going until the timeout reaches.
Please see the log file and explain me why this is happening and how to resolve this issue?
Guys,your help will be much appreciated, I am stuck with this issue for last 5 days.
Thanks
log:https://communities.intel.com/servlet/JiveServlet/download/324548-103694/xfstk.log.zip
Click to expand...
Click to collapse
did you fix it? I'm having problems!
Please! help! i can't fix it.
So. my phone will die, If you can fix it. Please tell me!!!!
LuBu161 said:
did you fix it? I'm having problems!
Please! help! i can't fix it.
So. my phone will die, If you can fix it. Please tell me!!!!
Click to expand...
Click to collapse
I was facing the same issue simply do all the process the same only one difference, once xFSTK shows you "continuing to OS..." unplug the phone and exist the program, open the program again and this time remove the dirictry value from the WF DnX and from IFWI it should appear as "n/a" and only leave the img file in the OS image, now do the process again, it might lose connection try powering the phone on and off until it gets the connection and then you should get to the bootloader.
Related
Hi, I was trying to use Flash tool and Don't know what happend but My Phone is completely DEAD right now even power button is also not working no screen is there (just blank phone).
I am having UMI X2 2GB rom, 32 gb internal memory, 1.5 GHZ (MT6589T) Model.
I tried to use SP Flash tool to recover my phone. Firstly I tried to format the phone, After that I tried to run the correct scatter file for MT6589 (from one of the ROM Posted under UMI-X2).
Drivers for the SP Flash tool is loaded correctly (into my Windows 8 Pc). I was previosly getting error as follow : SP FLASH TOOL ERROR: (8200)
[Platform Error] The load and target are inconsistent!
Now, after searching a lot I found that its something wrong with SP Flash tool version.
So I downloaded SP Flash Tool V3.1304.O.sn119 version. After that I am trying to "Download" the rom (with the correct scatter file for my ROM). but its only showing me RED Bar (with 100%) and after that it does nothing. Its neither showing me any error nor its continuing the process.
I am in serious problem here. Please help me out.
Thanks in advance!
- Umang
umang_nine said:
Now, after searching a lot I found that its something wrong with SP Flash tool version.
So I downloaded SP Flash Tool V3.1304.O.sn119 version. After that I am trying to "Download" the rom (with the correct scatter file for my ROM). but its only showing me RED Bar (with 100%) and after that it does nothing. Its neither showing me any error nor its continuing the process.
I am in serious problem here. Please help me out.
Click to expand...
Click to collapse
Try this version of :
SP Flash Tool
October Official Rom
USB Drivers (if needed)
Works for me.
Necro thread...
I have the same issue.
A couple of days ago the phone just started turning off / locking up when off, and having great difficulty tuning on... i.e. pulling out the battery for a minute or a few times.
Now the phone won't turn on at all. They only sign of life is the charging animation when you plug it in.
Prior to all this, there appeared a window in Chinese with some options. my GF (who's phone it is) just pressed something, no idea what. But she said something about 'drawing on the screen'??? sound like something locked up and the previous frame wasn't deleted from the frame buffer before redrawing the new one... I have no idea.
Anyway, I tried going into recovery to see if there was anything I could do there, unfortunately everything was in Chinese, so not much help. for some reason now, the recovery isn't even working.
Now I can connect to the phone via SPflash, but I get the above response: '[Platform Error] The load and target are inconsistent!'
Some other ROMs I tried give me this response:
'The load to be downloaded is for MT6589;
The target platform is MT6582_S00'
Which is quite suspicious.
Any ideas?
Thanks
hisense HS-U980 bricked....
hi,i have the smartphone hisense hs-u980 with mt6589 or mt6589t, i dont understand.... so, i briched with sp.flash tool and now is ompletly dead,,, can i have ur help-sipport please?
thank u very much
Hs-u980 complete dead/bricked
carretto76 said:
hi,i have the smartphone hisense hs-u980 with mt6589 or mt6589t, i dont understand.... so, i briched with sp.flash tool and now is ompletly dead,,, can i have ur help-sipport please?
thank u very much
Click to expand...
Click to collapse
i have ur same phone and i have ur same problem,my pkone is dead later flash any wrong miui rom from cwm recovery and now is dead,i dont have any idea where is original firmware for sp.flash tool or other how piranha box,please,anyone can please me??? THANK U for read!!!!
I have the same Problem. So frustrating men. If anyone finds a solucion please email me [email protected] ...
SP FLASH TOOL ERROR: (8200)
As i connect my phone it disconnects after 2 seconds..
Please give me a site to download scatter file for my micromax a 310
Hello,
I had my device running slow from the moment I opened it the first time.
I know I should have take it to the warranty, but I needed the time all day.
I dropped it so I couldn't take it there anymore.
Now, since the warranty is void, I wanted to change the 5.0.2 lollipop, hoping for a normal response time from it.
I tried installing TWRP and I didn't suceed. It got stuck on the Lenovo logo.
I managed to put back a recovery from another ROM (lenovo) and used QcomDLoader.exe to flash another rom. A stock version of A6010 but of 16GB ROM not 8 like mine.
It didn't work, even if I waited more than 500 seconds (more than 5 minutes). Now, it's in black screen, won't come out of it.
I managed to find some errors with another qualcomm flash applications:
Code:
Sahara Version:0
Start Sending Programmer
Download Fail:System.Exception: Unable to download Flash Programmer using Sahara Protocol
at QC.QMSLPhone.Phone.QPHONEMS_SaharaArmPrgDownload(String sFileName)
at QC.SwDownloadDLL.SwDownload.QPHONEMSSaharaDownloadArmPrg(UInt64& version, String armPrgPath)
Download Fail:Sahara FailSahara Fail
Finish Download
Click to expand...
Click to collapse
I hope someone has an idea that could help me out. I'm trying non-stop for 10 hours now. My head really hurts, I didn't just post this here without trying to solve it myself first.
Thank you in advance for your help!
Andrei
UPDATE:
Okay, so I managed to install a 8GB A6000 firmware, but the GSM network is not working. It shows 2 sims of 2G and none is working.
I have the open source files of my original firmware on lenovo's site.
How could I replace the entire OS, so masically copy/paste the files from computer onto the phone? Or ..can I make a flash version from those files?
Thank you!
Andrei
Question: My 5x will only show in QC download mode as 9008. I have this same error for my LGH791 with the error you show above for Sahara fail. How did you overcome this? Was it the flash programmer, did you determine the cause?
I have a LG K7 MS330 whose software was not working properly. Looking for a solution, I found that there were several firmware updates of this terminal (I had the version 10e compilation), which basically consisted of more recent versions of compilation distributed in kdz files. I proposed to download the latest update available ensuring I download the file corresponding to the smartphone region (MTP in my case).
So, I downloaded the file MS33010k_00_0405.kdz, the tool LGUP 1.14.3 and the file LGUP_MS330.dll version 0.1.2.7. I connected the phone to the PC and started the process.
At 99% the installation failed. However, I could still enter in download mode. So, I download an older version, the MS33010h_00_1021.kdz and repeated the process. This time I got no error.
However, when I finished, my phone went into hardbrick mode. Check the battery and no problem, even charging perfect inside the phone. I do not think the device has any problem with hardware as it worked before. The only life signal I have now from the device is connecting it via USB to PC and press the VOL +, VOL- and POWER buttons simultaneously. In this way, Windows recognizes it as "unknown usb device".
I would be grateful to anyone who can help me with this problem. Regards
I have the same problem!! Please!!
WOoh, I can't believe it. I have the same HEAD-BRICK, because my head has really bricked with this. I came here looking for answers and I just found that someone have the same problem than me, and with no answer. I did similars procediments before I get the hardbrick mode. Please, someone help me, I will really apreciate your help!!!! I really need to fix this!!! Please Please Please :crying: :crying:
i have the same problem too can some one help... no download mode.. no
emergency mode...please
Same.. Did anyone find out how to fix it?
Same issue... stuck in Qualcomm mode.
Any fix yet?
Need an mbn file for this K7. Looks like the only
Hope is finding the qfil file and firehose? Firehouse?. I forget. Xml file. If anyone has leads to where to start or links. It
Would be appreciated. Thank.
I have the exact same problem
I have the exact same problem that you have. I flashed an older rom by accident and now the screen is black and it is detected as qdloader9008. If anyone has found the firehose and the rest of the QFIL files then please help us.
Hi all,
I recently got my hands on a screen-damaged Archos 50 Diamond (ac50da) running the latest stable stock Android 4.4.4 ROM (I didn't know that an Android 5.1 preview was available here : https://blog.archos.com/fr/lollipop-en-version-beta-sur-le-50-diamond/).
I bricked it by doing the following :
- Trying to install @phhusson TWRP from here : https://twrp.me/archos/archos50diamond.html, without upgrading to 5.1 first (as explained here : https://forum.xda-developers.com/ar...ment/twrp-support-thread-archos-twrp-t3468677).
This did not work, as when trying to enter recovery mode by holding VolumeUp while powering up the phone would now bring up a totally green, then totally red screen, but nothing else. No device is detected if I plug it in a computer (either Linux or Windows).
- Booting (not flashing yet) CWM from here : http://www.arctablet.com/blog/forum...50-diamond-root-procedure-recovery-cwm-v6051/
For some reason, I ended up rebooting (without installing CWM or anything else). But before rebooting, CWM warned me that my ROM wasn't rooted, and offered to install the su binary in /system/xbin/su. That's were I met my doom, because the device would then no longer boot.
- If I power up the device, the Archos logo shows up, then a black screen. Plugging the device on a Windows computer shows a dozen data drives, and the devices itself identified as QHSUSB_BULK.
- I thought of using QFIL (Qualcomm File Image Loader) to re-image the device : https://androidmtk.com/download-qualcomm-flash-image-loader-qfil
I managed to get my hands on a stock firmware image (prog_emmc_firehose_8936.mbn or validated_emmc_firehose_8936.mbn) by paying here : https://firmware.gem-flash.com/index.php?a=browse&b=file-info&id=110067 but QFIL won't flash it as I don't have a driver for QHSUSB_BULK.
- However, I'm unable to find a proper driver for that device. I found several Qualcomm drivers, either for QHSUSB_BULK or the (apparently older) QDLOAD, but none of them include definitions for the Archos 50 Diamond.
- The device's USB identification is the following : USB\VID_05C6&PID_9057&MI_00
VID (Vendor ID) 05C6 = Qualcomm
PID (Product ID) 9057 = ??? (should be the Archos 50 Diamond but is not referenced anywhere)
MI (Master Interface) = ??? (no idea what that means)
- Other findings :
The .mbn files refer to a Qualcomm Snapdragon 610 MSM8936
Inside the stock image is an android-info.txt file that reads "board=msm8916"
So, can you guys help me out here ?
I think that finding a proper QHSUSB_BULK driver for VID_05C6&PID_9057 should be enough, but I'm open to any suggestion.
Thanks !
I think I found a driver for that device here : https://driverpack.io/fr/hwids/USB\VID_1D9C&PID_9057&MI_04
It's for a "Sonim XP5 HS-USB NMEA 9057", but whatever.
However, after installing the driver (just uncompress it using 7-zip), QFIL fails when trying to download the firmware image with "failed to switch to EDL mode" (EDL = emergency download).
Anyone has a better idea*?
VICTORY !!!
When trying to power off/reboot the device, I noticed that it could still boot in fastboot mode, by holding VolumeUp + power until the screen turns green, then release the buttons before the screen turns red.
I could then boot again in CWM (still unable to flash it though), and re-install a stock ROM from the manufacturer site : https://www.archos.com/us/support/support_tech/downloads.html?type=s&rlist=1&devid=240
Phew ! At last !
And now to try and install the 5.1 beta update…
Hello! I have Archos diamond 50 in qd 9008 mode always. Can you upload firmware that you download from gemflash? I want try unbrick device.
IDLeon said:
Hello! I have Archos diamond 50 in qd 9008 mode always. Can you upload firmware that you download from gemflash? I want try unbrick device.
Click to expand...
Click to collapse
Do you have any place I can upload it to ?
Hi.
I have the same problem and I cant find the flash file.
Can you please give me the .mbn flash file (prog_emmc_firehose_8936.mbn or validated_emmc_firehose_8936.mbn) ?
Thank you
karim-ps said:
Hi.
I have the same problem and I cant find the flash file.
Can you please give me the .mbn flash file (prog_emmc_firehose_8936.mbn or validated_emmc_firehose_8936.mbn) ?
Thank you
Click to expand...
Click to collapse
Do you have any place I can upload it to ?
Maybe Google drive or wetransfer.com
Thank you
karim-ps said:
Maybe Google drive or wetransfer.com
Thank you
Click to expand...
Click to collapse
If you can give me access to one of yours, I'll do it ASAP. I don't have one myself and don't plan to.
breversa said:
If you can give me access to one of yours, I'll do it ASAP. I don't have one myself and don't plan to.
Click to expand...
Click to collapse
I sent it through a private message.
Thank you
For anyone interested : I have some stock firmware files, but nowhere to store them (I'm not looking to register to yet another service). If you're willing to host them, please send me a private message. Thanks !
Thank you
breversa said:
For anyone interested : I have some stock firmware files, but nowhere to store them (I'm not looking to register to yet another service). If you're willing to host them, please send me a private message. Thanks !
Click to expand...
Click to collapse
I'm in the process of uploading the 50_Diamond.rar stock firmware to https://androidfilehost.com/
I'll give the link when it's done. Feel free to ping me if I forget !
Okay, here it is : https://www.androidfilehost.com/?w=files&flid=319661
Greetings, everyone. I'm unable to boot my Realme U1, after a recent unwise decision of relocking its bootloader after flashing a custom boot image i found over this thread: https://forum.xda-developers.com/android/help/method-rooting-realme-u1-t3916683
I hadn't encountered locked bootloaders before, so I realised it isn't supposed to work with android pie, which resulted in a system crash.
Now i'm unable to get the device recognized by my pc at all,and it keeps saying that the current boot image is destroyed and cannot boot.
Also, only recovery mode is working.
Any suggestions on what i must do to fix this?
any kinda help would be greatly appreciated
and thanks
I also have exact problem no solution till now!!!
ps1084 said:
Greetings, everyone. I'm unable to boot my Realme U1, after a recent unwise decision of relocking its bootloader after flashing a custom boot image i found over this thread: https://forum.xda-developers.com/android/help/method-rooting-realme-u1-t3916683
I hadn't encountered locked bootloaders before, so I realised it isn't supposed to work with android pie, which resulted in a system crash.
Now i'm unable to get the device recognized by my pc at all,and it keeps saying that the current boot image is destroyed and cannot boot.
Also, only recovery mode is working.
Any suggestions on what i must do to fix this?
any kinda help would be greatly appreciated
and thanks
Click to expand...
Click to collapse
This u read?
https://www.getdroidtips.com/stock-rom-realme-u1-firmware/
Please reply
I accidentally hard bricked my realme u1 while I am rooting it.
Any solution please reply.
ps1084 said:
Greetings, everyone. I'm unable to boot my Realme U1, after a recent unwise decision of relocking its bootloader after flashing a custom boot image i found over this thread: https://forum.xda-developers.com/android/help/method-rooting-realme-u1-t3916683
I hadn't encountered locked bootloaders before, so I realised it isn't supposed to work with android pie, which resulted in a system crash.
Now i'm unable to get the device recognized by my pc at all,and it keeps saying that the current boot image is destroyed and cannot boot.
Also, only recovery mode is working.
Any suggestions on what i must do to fix this?
any kinda help would be greatly appreciated
and thanks
Click to expand...
Click to collapse
Hey man!
It's not a hardbrick, its soft brick.
If you can access recovery then flash a custom recovery, then flash the original boot.img and recovery.img, then reboot to COS recovery flash your ozip and reboot this should fix it!
Hope this helps!
Hi there I am new to this forum and I don't know that I am posting at right place . I have my Ralme U1 phone hard bricked and unable to turn on not Even it is detecting the charger. but when I connect it with my PC and hold power button for 7 to 9 second the device manager shows Realme Preloader as the device name and it stays there only for 2 seconds and then it again gone. Is anyone have the solution on how to unbrick it Please Help!!!!
DHANOLA said:
Hi there I am new to this forum and I don't know that I am posting at right place . I have my Ralme U1 phone hard bricked and unable to turn on not Even it is detecting the charger. but when I connect it with my PC and hold power button for 7 to 9 second the device manager shows Realme Preloader as the device name and it stays there only for 2 seconds and then it again gone. Is anyone have the solution on how to unbrick it Please Help!!!!
Click to expand...
Click to collapse
Hello Mate!
I hard Bricked Realme U1 over 2 times and recovered it!
MTK chipset devices are easy to unbrick.
I would love to help you, anyway to contact??
[email protected]#$ said:
Hello Mate!
I hard Bricked Realme U1 over 2 times and recovered it!
MTK chipset devices are easy to unbrick.
I would love to help you, anyway to contact??
Click to expand...
Click to collapse
You can contact me by mail: [email protected]
DHANOLA said:
You can contact me by mail: [email protected]
Click to expand...
Click to collapse
Hello Everyone!! It has been two years for me to be in this situation. I get mail from many of those who have a similar problem. So I am here, providing the solution to how I solved this solution.
For the solution, you may, first of all, join the given below Telegram. Link from anybody's phone and ask there for your problem or describe your problem in the group someone will help you out. The group icon has been attached.
Just connect to them on telegram and tell your issue they will surely help..
Telegram link
https://t.me/RealmeU1
Or search for Realme U1 group in telegram
Group icon attached
If then also you need help, please contact me by my mail. As mentioned in the above chat reply,