Related
Hello,
i have successfully installed the 4.4.2 KK original rom released on samfirmware 3 weeks ago on my 9205 LTE, and now i would like to downgrade to 4.2.2. Is there a method? Can it be done?
Thanks!
PS: What is the best ROM for mega?
Up!
http://forum.xda-developers.com/showthread.php?t=2773380
trurl3 said:
http://forum.xda-developers.com/showthread.php?t=2773380
Click to expand...
Click to collapse
Not answered at my question.
Tried flashing 4.2.2 and odin fails. What can i do?
corrystile said:
Not answered at my question.
Tried flashing 4.2.2 and odin fails. What can i do?
Click to expand...
Click to collapse
Nothing. You already installed the newest Knox Bootloader included with the Firmware and it can not be downgraded. If you do downgrade the Bootloader you will brick your phone. You can flash "ROMS" ( not Firmwares ) all you like from previous builds meaning you can flash a Custom 4.2.2 Rom but you can not downgrade the newest Knox Bootloader you installed.
DarkAngel said:
Nothing. You already installed the newest Knox Bootloader included with the Firmware and it can not be downgraded. If you do downgrade the Bootloader you will brick your phone. You can flash "ROMS" ( not Firmwares ) all you like from previous builds meaning you can flash a Custom 4.2.2 Rom but you can not downgrade the newest Knox Bootloader you installed.
Click to expand...
Click to collapse
Really?
I have now the TPH beta installed, but is only a beta, and i really want to return in 4.2.2 firmware, that's absolutely a s*it.
So can't donwgrade with or without root, cannot downgrade bootloader, nothing to return to stock 4.2.2?
All the lag from 4.2 just isn't worth going back. I had to go back to my iPhone 5S until the 4.4.2 came out. Now I'm on 4.4.2 and back on my android and loving it. Never want to go back to the iPhone again.
corrystile said:
Hello,
i have successfully installed the 4.4.2 KK original rom released on samfirmware 3 weeks ago on my 9205 LTE, and now i would like to downgrade to 4.2.2. Is there a method? Can it be done?
Thanks!
Click to expand...
Click to collapse
Yes you can, using a mobile ODIN
Ura535 said:
Yes you can, using a mobile ODIN
Click to expand...
Click to collapse
No!! he can't use odin to flash a 4.2.2 firmware because he flash the 4.4.2 kk firmware with the new knox bootloader if he try to flash an older firmware he will brick his phone. @corrystile you can use the MegaFire v11 to go back to jellybean 4.2.2 thanks to @megalomanic14 this is a TW base rom and it work on both 19200 and 19205.
Sent from my GT-I9200 using XDA Premium 4 mobile app
alexischino said:
No!! he can't use odin to flash a 4.2.2 firmware because he flash the 4.4.2 kk firmware with the new knox bootloader if he try to flash an older firmware he will brick his phone. @corrystile you can use the MegaFire v11 to go back to jellybean 4.2.2 thanks to @megalomanic14 this is a TW base rom and it work on both 19200 and 19205.
Sent from my GT-I9200 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
And the rom also works on the i527m mega (Canadian version).
Sent from my SGH-I527M using XDA Free mobile app
Dark Angel can you help?
DarkAngel said:
Nothing. You already installed the newest Knox Bootloader included with the Firmware and it can not be downgraded. If you do downgrade the Bootloader you will brick your phone. You can flash "ROMS" ( not Firmwares ) all you like from previous builds meaning you can flash a Custom 4.2.2 Rom but you can not downgrade the newest Knox Bootloader you installed.
Click to expand...
Click to collapse
I bricked my phone. I restored my previous backup(MK1) made with efs pro. I restored all partitions except user data and system. Now it is not responding with any buttons. When i connect it with pc it shows qhsusb_dload. Can you please make a debrick image for it? Or tell me how can i fix it please.
Thanks
bricked
Damn
briked .sorry for my language
DaHulk07 said:
Damn
Click to expand...
Click to collapse
I got the same problem so listen to me
I installed a custom recovery 《philz recovery 》 then i wiped and format everything...
I reinstalled rom 4.2.2 with odin and i pressed nand erase all button and repartition button on odin and i flashed it then it work but i lost IMEI
Then i installed custom recovery and wipped all and reinstalled the 4.4.2 rom ...trattata
All going good and my phone gt i 9200 really working good
Try it bro
aliyassin said:
I got the same problem so listen to me
I installed a custom recovery 《philz recovery 》 then i wiped and format everything...
I reinstalled rom 4.2.2 with odin and i pressed nand erase all button and repartition button on odin and i flashed it then it work but i lost IMEI
Then i installed custom recovery and wipped all and reinstalled the 4.4.2 rom ...trattata
All going good and my phone gt i 9200 really working good
Try it bro
Click to expand...
Click to collapse
This would probably only work if you were still able to get into " Download Mode " on your phone.
Bricked but download mode good
Ok so I tried this and nothing will boot up now. Was the 4.2.2 a custom rom or stock ? I have a replacement screen that cant boot into firmware 4.3 or 4.4.
jimmykirby said:
Ok so I tried this and nothing will boot up now. Was the 4.2.2 a custom rom or stock ? I have a replacement screen that cant boot into firmware 4.3 or 4.4.
Click to expand...
Click to collapse
Yes this is a very big problem right now. I just ordered two replacements and none of them work
Sent from my SM-N900V using XDA Free mobile app
A work around for the cheap screen issue booting on stock 4.3 and 4.4 is to flash phils recovery and root followed by a zip install of a custom 4.4 rom. Boots right up . Also with custom recovery I have backed up stock 4.2 firmware on a diff. mega and used that to restore on my 4.4 mega. Not a true downgrade but bootable into stock rom. Took me a long while to figure this out. Hope this helps.
jimmykirby said:
A work around for the cheap screen issue booting on stock 4.3 and 4.4 is to flash phils recovery and root followed by a zip install of a custom 4.4 rom. Boots right up . Also with custom recovery I have backed up stock 4.2 firmware on a diff. mega and used that to restore on my 4.4 mega. Not a true downgrade but bootable into stock rom. Took me a long while to figure this out. Hope this helps.
Click to expand...
Click to collapse
How can you do that when there is no root?
Sent from my SM-N900V using XDA Free mobile app
Do you mean boot ? If so ; I removed battery to power off, then put it back , then hold volume down and home button and power at the same time to get into download mode. Then used Odin to flash custom recovery. I used Phils recovery. My issue began when I allowed 4.3 OTA update. I lost boot and stock recovery but could still get into download mode.
jimmykirby said:
Do you mean boot ? If so ; I removed battery to power off, then put it back , then hold volume down and home button and power at the same time to get into download mode. Then used Odin to flash custom recovery. I used Phils recovery. My issue began when I allowed 4.3 OTA update. I lost boot and stock recovery but could still get into download mode.
Click to expand...
Click to collapse
There is no root for 4.4. These are the phones with the problems because can't do anything right now. Does the file you have work for 4.4? Have you tried for that version firmware?
Sent from my SM-N900V using XDA Free mobile app
New firmware is out NJ6. I can't get the OTA yet but it is available from KIES. Hopefully this will solve all of my signal issues.
I saw this on sammobile as well...most likely this will close the current root loophole...will wait patiently until an awesome developer can create a rooted 4.4.4 rom.
Yes, I did lose root but that is okay with me if it helps my signal. Haven't been able to test it in problem areas yet.
murmur70 said:
Yes, I did lose root but that is okay with me if it helps my signal. Haven't been able to test it in problem areas yet.
Click to expand...
Click to collapse
Have you tried to root again with towel root?
Towel Root no longer works, I tried it after I updated...
The-Beast said:
Towel Root no longer works, I tried it after I updated...
Click to expand...
Click to collapse
Thanks!
Sent from my Nexus 7 using Tapatalk
I am cautiously optimistic that my signal is much improved.
Sent from my SM-T700 using XDA Free mobile app
I actually have 4.4.4 rooted right now on my device but safestrap doesn't work properly now. It starts to load but then reboots into OS.
The first 4.4.4 rom I made would boot, but only had a black screen (kernel modules didn't match boot.img), then I tried the nj6 boot.img and got the warning about unauthorized kernel. So, I decided to try one more thing. I reflashed the pre-rooted 4.4.4 rom I made and then flashed all of the 4.4.4 firmware in Odin EXCEPT for the system partition. This allowed me to boot into my rooted nj6 4.4.4 rom.
gr8nole said:
I actually have 4.4.4 rooted right now on my device but safestrap doesn't work properly now. It starts to load but then reboots into OS.
The first 4.4.4 rom I made would boot, but only had a black screen (kernel modules didn't match boot.img), then I tried the nj6 boot.img and got the warning about unauthorized kernel. So, I decided to try one more thing. I reflashed the pre-rooted 4.4.4 rom I made and then flashed all of the 4.4.4 firmware in Odin EXCEPT for the system partition. This allowed me to boot into my rooted nj6 4.4.4 rom.
Click to expand...
Click to collapse
Ain't gonna lie ... a lot of that went right over my head; but I'm excited about it anyway LOL :good:
How do I get it on my phones have 2 Note 3's in my house. It's not available on Kies or OTA in my Texas area. Not rooted phones.. or just wait some more?? Thanks
We're actually getting an update inline with other carriers? Anyone noticing any improvements? And do we have any idea when it'll push OTA?
Can someone post up just the radio?
pez910 said:
We're actually getting an update inline with other carriers? Anyone noticing any improvements? And do we have any idea when it'll push OTA?
Click to expand...
Click to collapse
The only thing I have noticed since updating last night is, data speeds have dropped. Not sure if its the radios, or if its the network being bottle necked, but Its taking me forever to download apps and files from my google drive account..
YankInDaSouth said:
Ain't gonna lie ... a lot of that went right over my head; but I'm excited about it anyway LOL :good:
Click to expand...
Click to collapse
can you send on the link for your root 4.4.4
gr8nole said:
I actually have 4.4.4 rooted right now on my device but safestrap doesn't work properly now. It starts to load but then reboots into OS.
The first 4.4.4 rom I made would boot, but only had a black screen (kernel modules didn't match boot.img), then I tried the nj6 boot.img and got the warning about unauthorized kernel. So, I decided to try one more thing. I reflashed the pre-rooted 4.4.4 rom I made and then flashed all of the 4.4.4 firmware in Odin EXCEPT for the system partition. This allowed me to boot into my rooted nj6 4.4.4 rom.
Click to expand...
Click to collapse
I was having the same issue when I tried to port Sprint 4.4.4 It would boot but I get black screen... Are you sure you flashed the 4.4.4 bootloader?
I would try to make a deodex 4.4.4 system flashable zip and flash and then right after it reboot to odin and flash the 4.4.4 kernel might work without flashing the bootloader and that way we have a working SS.
Kind of a newb to Note 3 firmware upgrades. I just downloaded the new NJ6 firmware from Sammobile. What's the best way to flash this?
gypsy214 said:
I was having the same issue when I tried to port Sprint 4.4.4 It would boot but I get black screen... Are you sure you flashed the 4.4.4 bootloader?
I would try to make a deodex 4.4.4 system flashable zip and flash and then right after it reboot to odin and flash the 4.4.4 kernel might work without flashing the bootloader and that way we have a working SS.
Click to expand...
Click to collapse
Can you upload please
uberalbo said:
Kind of a newb to Note 3 firmware upgrades. I just downloaded the new NJ6 firmware from Sammobile. What's the best way to flash this?
Click to expand...
Click to collapse
If you're a newb I recommend to stay out of it if you want root and ss. We waited all this time we can wait more to have a stable rooted with ss working version
gypsy214 said:
I was having the same issue when I tried to port Sprint 4.4.4 It would boot but I get black screen... Are you sure you flashed the 4.4.4 bootloader?
I would try to make a deodex 4.4.4 system flashable zip and flash and then right after it reboot to odin and flash the 4.4.4 kernel might work without flashing the bootloader and that way we have a working SS.
Click to expand...
Click to collapse
joseph- said:
Can you upload please
Click to expand...
Click to collapse
The only way to tell if it will work is to have someone flash just the system when its a flashable zip and then reboot to download and flash kernel via odin
gypsy214 said:
I was having the same issue when I tried to port Sprint 4.4.4 It would boot but I get black screen... Are you sure you flashed the 4.4.4 bootloader?
I would try to make a deodex 4.4.4 system flashable zip and flash and then right after it reboot to odin and flash the 4.4.4 kernel might work without flashing the bootloader and that way we have a working SS.
Click to expand...
Click to collapse
I tried that and it didn't work. The NC4 bootloader won't let you use the NJ6 boot.img. It gives the unauthorized software message.
Dear Techies,
I have moto e, previously i m in Soak Test Nd i hv lollipop on my moto e. Thn i install some lollipop based custom rom. After some times i becum booring from unoffical custom rom. So, i gain flash my mobile with stock rom. Due to upgrade my bootloader for lollilop they didn't support Kitkat 4.4.4. Then i got Hard bricked. There is no any fix. But i m so lucky i got new replacement of motherboad free due to o under warranty.
And Aftr changing motherboad i have new Emei and serial no. So i unable to get soak test update.
My Question is this please suggest me the way i flash 5.1 custom rom then after if i want to back in Stock Rom without got hardbrick.
Thank you
himanshuzzz said:
Dear Techies,
I have moto e, previously i m in Soak Test Nd i hv lollipop on my moto e. Thn i install some lollipop based custom rom. After some times i becum booring from unoffical custom rom. So, i gain flash my mobile with stock rom. Due to upgrade my bootloader for lollilop they didn't support Kitkat 4.4.4. Then i got Hard bricked. There is no any fix. But i m so lucky i got new replacement of motherboad free due to o under warranty.
And Aftr changing motherboad i have new Emei and serial no. So i unable to get soak test update.
My Question is this please suggest me the way i flash 5.1 custom rom then after if i want to back in Stock Rom without got hardbrick.
Thank you
Click to expand...
Click to collapse
which rom u r using custom or stock? if u r using stock 4.4.4 then 1st of all make a nandroid backup of ur stock rom 4.4.4 using twrp recovery and keep it safe then go to flash anything, for not get bricked ur device
[email protected] said:
which rom u r using custom or stock? if u r using stock 4.4.4 then 1st of all make a nandroid backup of ur stock rom 4.4.4 using twrp recovery and keep it safe then go to flash anything, for not get bricked ur device
Click to expand...
Click to collapse
If i flash to any lollipop based custom rom and after come back to kitkat offical rom. Did it hardbicked again or not.
I hardbrick moterboad brick not system.
what i do to downgrade :-
wipe complete rom in twrp on soak 5.0.2 then installed stock 4.4.4 without any problems.
zeshan94 said:
what i do to downgrade :-
wipe complete rom in twrp on soak 5.0.2 then installed stock 4.4.4 without any problems.
Click to expand...
Click to collapse
Did u flashed with officail firmware with Fastboot
himanshuzzz said:
Did u flashed with officail firmware with Fastboot
Click to expand...
Click to collapse
yeah i flashed stock official 4.4.4 via fastboot after doing a complete wipe of 5.0.2.
i entered all commands.got a 'failed' messages on 3 commands i.e boot,partition,motoboot. but phone booted successfully.. even now whenever i flash 4.4.4 i get those failed messages.
zeshan94 said:
yeah i flashed stock official 4.4.4 via fastboot after doing a complete wipe of 5.0.2.
i entered all commands.got a 'failed' messages on 3 commands i.e boot,partition,motoboot. but phone booted successfully.. even now whenever i flash 4.4.4 i get those failed messages.
Click to expand...
Click to collapse
Where u get official stock 4.4.4 firmware. I had flash firmware of 4.4.2 thn i updated to 4.4.4 then after update rebooting they got hard bricked. ????
himanshuzzz said:
Where u get official stock 4.4.4 firmware. I had flash firmware of 4.4.2 thn i updated to 4.4.4 then after update rebooting they got hard bricked. ????
Click to expand...
Click to collapse
Hardbrick only occures when u flash downgrade firmware via Fastboot, so if u dont want hardbrick. Flash the ROMs via TWRP recovery as its not flash Bootloader, download Flasheble ROMs and flash via recovery it wont hardback.
himanshuzzz said:
Where u get official stock 4.4.4 firmware. I had flash firmware of 4.4.2 thn i updated to 4.4.4 then after update rebooting they got hard bricked. ????
Click to expand...
Click to collapse
you can get it from here - http://forum.xda-developers.com/moto-e/general/index-moto-e-original-android-dev-roms-t3000181
. if for any reason the download link doesnt work then search in the general forum for 4.4.4 firmware.
Hello,
Tried all ROMS, none is working, below is the detail:
Installed
1 . CRISSCROSS ROM - no audio, while on call in earpiece and loudspeaker
2 . XtreStoLite-ROM-3.3.1-DPDP.zip ROM, Problem - AFter flash Phone model shows G925F AND NO CONNECTION TO NETWORK, EMERGENCY CALLS ALL TIME, TRIED flashing MODEM for g925w8 no LUCK
3. KIngfisher ROM, after flashing Kingfisher ROM, phone is STUCK AT
*KERNEL IS NOT SEANDROID ENFORCING* and phone will not turn ON.
SO , I guess there is NO working CUSTOM ROM fOR G925W8,canada. At the end I flashed stock BOJ7 AND Phone is working perfectly with 5 1 1 G925W8 BOJ7
I'm using the G925W8 on Xtrestolite. You must be missing something. I'm not sure what though
KAwAtA said:
I'm using the G925W8 on Xtrestolite. You must be missing something. I'm not sure what though
Click to expand...
Click to collapse
so why am I getting emergency calls?
1 can you tell me in detail that which steps did you follow?
2 what was your android version when you flashed rom?
3 what is your baseband verison now?
4 Was it rooted already?
5 Does this rom have spanish langauage? can you check for me?
Thank you
@Administr4tor
Custom ROMs for that work for W8
I've have confirmation from multiple users that my OZOP Rom is compatible and working flawlessly for the following devices Flat and Edge (rom is Edge based) F/I/T/W8. Could be more this are just the confirmed working devices.
Also OZOP is currently very active with development and actually about to be updated!
What ever Rom you decide is up to you.
Just letting you know there are options available.
Good luck
I believe you need to update your bootloaders using a stock 6.0.1 image or flash them via odin.
Also look in the T mobile section for a custom kernel like stang has a rom showing for. Our devices were basically secondhand tmobile rebranded as W8. Everything is literally the same minus us canadian guys cant use wifi calling.
So in short flash rom, then kernel and let it boot. Once it boots then turn it off and restart into recovery and flash call fix. If you need an updated callfix I can post a link here.
I found if you flash all three before first boot the zip from callfix creates a bootloop. Therefore it tells me the zip needs to be flashed over a built system
Nothing seems to work, No matter what I have No network connection... on any rom..
AndroTechGuy said:
Nothing seems to work, No matter what I have No network connection... on any rom..
Click to expand...
Click to collapse
You mentioned it worked on 5.1.1 thats your problem u need to take the ota or flash stock 6.0.1 with odin or find the 6.0.1 bootloader and radio and flash them cuz all the roms your trying are 6.0.1 base thats why u dont have service im suprised they even boot.
xstokerx said:
You mentioned it worked on 5.1.1 thats your problem u need to take the ota or flash stock 6.0.1 with odin or find the 6.0.1 bootloader and radio and flash them cuz all the roms your trying are 6.0.1 base thats why u dont have service im suprised they even boot.
Click to expand...
Click to collapse
I could have sworn I was running 6.0.1 stock, Maybe I wasn't, but alright I'll try to find the radio. thanks mate
christopherrrg said:
I believe you need to update your bootloaders using a stock 6.0.1 image or flash them via odin.
Also look in the T mobile section for a custom kernel like stang has a rom showing for. Our devices were basically secondhand tmobile rebranded as W8. Everything is literally the same minus us canadian guys cant use wifi calling.
So in short flash rom, then kernel and let it boot. Once it boots then turn it off and restart into recovery and flash call fix. If you need an updated callfix I can post a link here.
I found if you flash all three before first boot the zip from callfix creates a bootloop. Therefore it tells me the zip needs to be flashed over a built system
Click to expand...
Click to collapse
yes, I need updated call fix as the one I have is only for 5 1 1
Administr4tor said:
yes, I need updated call fix as the one I have is only for 5 1 1
Click to expand...
Click to collapse
https://drive.google.com/file/d/0B4Gyz91x5k7gc2NBS2N5TFQwY0k/view?usp=drivesdk
Uploaded to my personal drive because I got tired of chasing the link. (Credits to author of zip, name inside.)
xstokerx said:
You mentioned it worked on 5.1.1 thats your problem u need to take the ota or flash stock 6.0.1 with odin or find the 6.0.1 bootloader and radio and flash them cuz all the roms your trying are 6.0.1 base thats why u dont have service im suprised they even boot.
Click to expand...
Click to collapse
Every time I try to flash the stock 6.0.1 i get SW Rev error Device 4 Binary 3.
AndroTechGuy said:
Every time I try to flash the stock 6.0.1 i get SW Rev error Device 4 Binary 3.
Click to expand...
Click to collapse
http://www.sammobile.com/firmwares/database/SM-G925W8/ get your firmware here for your carrier
I was told you get this error when trying to downgrade or by flashing the wrong package
Follow this http://www.w0lfdroid.com/2015/04/Ho...irmware-on-Samsung-Galaxy-S6-S6-Edge.html?m=1
xstokerx said:
http://www.sammobile.com/firmwares/database/SM-G925W8/ get your firmware here for your carrier
I was told you get this error when trying to downgrade or by flashing the wrong package
Follow this http://www.w0lfdroid.com/2015/04/Ho...irmware-on-Samsung-Galaxy-S6-S6-Edge.html?m=1
Click to expand...
Click to collapse
I know how to do it, the phone is unlocked, so not sure what carrier I should be flashing on it. I legit just need it to be able to use the Network, currently have it custom rom'd but no network.
xstokerx said:
http://www.sammobile.com/firmwares/database/SM-G925W8/ get your firmware here for your carrier
I was told you get this error when trying to downgrade or by flashing the wrong package
Follow this http://www.w0lfdroid.com/2015/04/Ho...irmware-on-Samsung-Galaxy-S6-S6-Edge.html?m=1
Click to expand...
Click to collapse
So the best I've been able to do is get it on a custom rom with no network connection at all. Seems like Im losing the ability to get it working. I tried Wind, telus stock 6.0.1's and i get the SW rev error, I've tried Rogers 5.1.1, and I get the same. Only thing that flashed on my device was "AP_G925W8VLU2AOG2_CL4808800_QB5701859_REV02_user_low_ship.tar" but it didn't boot past Galaxy S6 Edge logo, and recovery wasn't loading to try and factory reset to continue boot. I'm pretty sure this phone is dead.... I mean the custom rom was 6.0.1 with arter kernel, but no service... I'm lost...
christopherrrg said:
https://drive.google.com/file/d/0B4Gyz91x5k7gc2NBS2N5TFQwY0k/view?usp=drivesdk
Uploaded to my personal drive because I got tired of chasing the link. (Credits to author of zip, name inside.)
Click to expand...
Click to collapse
Thanks Sir.
Any ideas to my posts above?
guaranteed it's the bootloader and modem.
Once you flash the 6.0.1 ones via ODIN, then both crisscross and xtrolite should work. Crisscross, you will need to flash an independent audio fix which Christ have provided you in the post above.
Xtrolite (which I'm using with Twisted V4 Kernel) has it integrated so you shouldn't have any audio problems. Mind you, if you're still having trouble. Flash back 5.1.1 stock kernel and then let it update officially via samsung kies or OTA. Our phones now have 6.0.1 release so once you do that, you'll automatically have the new 6.0.1 bootloader and modem for our 925w8 phones. Then it'll be simple to flash a custom rom at that point.
Just update stock system to Marshmallow 6.0.1 (or flash stock 6.0.1 via Odin), then flash TWRP, do standard wipe with TWRP (Data, Cache and Dalvik), flash XtreStoLite via TWRP and everything will work
I have canadian S6 Edge and XtreStoLite is working very good
cripez said:
guaranteed it's the bootloader and modem.
Once you flash the 6.0.1 ones via ODIN, then both crisscross and xtrolite should work. Crisscross, you will need to flash an independent audio fix which Christ have provided you in the post above.
Xtrolite (which I'm using with Twisted V4 Kernel) has it integrated so you shouldn't have any audio problems. Mind you, if you're still having trouble. Flash back 5.1.1 stock kernel and then let it update officially via samsung kies or OTA. Our phones now have 6.0.1 release so once you do that, you'll automatically have the new 6.0.1 bootloader and modem for our 925w8 phones. Then it'll be simple to flash a custom rom at that point.
Click to expand...
Click to collapse
issue is I can't make the 6.0.1 stock files flash, always getting the SW rev error when cm.bin tries to flash, I've tried, Rogers, Wind, Telus stock files, nothing works. On CrissCross right now but not service... I want to get back to stock or at least make the bootloader work.
EDIT: Apparently using the most recent koodo stock, got me back to stock rom and with service! Now to root and do the custom rom properly! Thanks all!
christopherrrg said:
I believe you need to update your bootloaders using a stock 6.0.1 image or flash them via odin.
Also look in the T mobile section for a custom kernel like stang has a rom showing for. Our devices were basically secondhand tmobile rebranded as W8. Everything is literally the same minus us canadian guys cant use wifi calling.
So in short flash rom, then kernel and let it boot. Once it boots then turn it off and restart into recovery and flash call fix. If you need an updated callfix I can post a link here.
I found if you flash all three before first boot the zip from callfix creates a bootloop. Therefore it tells me the zip needs to be flashed over a built system
Click to expand...
Click to collapse
THIS G925W8 is working perfectly in 5 1 1 , I was able to make calls to all networks including GSM and WCDMA, I checked IMEI status with code 197328640 and IMIE status is OK, then after I flashed 6 0 1 and then the IMIE status turns to NOT GOOD and I am unable to make calls and stuck at EMERGENCY CALLS, looks like this PHONE IS JACKED??
Hello guys!
I really need help.
A GT-I9305 makes strange problems. I can't flash any custom rom. It will never boot. Only with stock Samsung ROM's it works.
Tried to install many custom ROM's for the S3 and it ended with the same. Bootloop and my only help to get it work is with Samsung Kies...
Wiped Cache, factory reset etc... Nothing worked... It annoys me so please help!
Thanks
BurakkuShippu
bad kernel imo
exe98123q said:
bad kernel imo
Click to expand...
Click to collapse
Sadly not.
I tried it with more kernels but nothing worked.
Does Knox has something to do with the bootloop's? (Stock Android 4.4.4 KitKat is working with stock kernel)
you have latest recovery ? older roms working for you ?
Every time the same result with twrp newest, twrp 2.8.7.0, cwm, philz.
Can't flash stock ROMs with Odin.
Sent from my GT-I9506 using XDA-Developers mobile app