Seems this device has no support anywhere. I spent the last 28 hours trying to fix my problem with no luck it went as follows:
-The device rom had a lot of adware related to something called: com.android.ser
-To get rid of it I rooted it successfully using FrameRoot
-I used some malware cleaners and deleted some sytem apps reported by them including com.android.ser
-My big mistake: I felt I need to clean more, and thought Mediatek apps are another source of adwares and deleted them, the device crashed and when rebooted stuck in bootloop.
-I went into recovery and deleted cache + data , didn't work
-installed ADB and tried sideload (which is an available option in the stock recovery) a ROM which I found here. It pushed the rom up to 100% but immediately failed after that.
-used fastboot app. It connected successfully, could restart the device from there but when I try to flash system.img it fails.
-USB debugging in developer options were most probably not enabled as I remember. Unknown sources was enabled.
Help is appreciated.
Update: Resolved. I'm posting the solution below, which is generic for Mediatek Devices, just ensure you use your own device's ROM, recovery,boot,...etc
(please note we are working on Windows)
(This Video has most of the below notes)
1- From device manager manually install Mediatek USB VCOM drivers and ADB, , installing PDANet (free PC application)helps a lot for some of driver installation, which was true in my case. Installation of PDA Net should be while device is connected and in normal mode (The boot loop in my case).
2-Download Smart Phone Flash Tool
3- You need what is called the "scatter file" for your device. In my case it was included in the ROM zip. There is also a tool to create one called "MTK Droid Tools".
4- open the scatter file, and make sure each image type is assigned to the corresponding image file. In my case the assignment was done automatically as the scatter was included with the ROM zip.
5- Shut down the device (use a needle or pin to reset in case of Ainol Numy 3G AX10)
6-Keep the device disconnected
7-click download on SP Flash tool
8- connect the device. The counters of download start counting and when done (about 5min), a small window with green sign pops up.
9- if download does not start try to fix your drivers. Sometimes you need to uninstall-reinstall drivers. Sometime you need to try from different sources.
10- tell me if this post was helpful
Related
Hi all,
I'm not an expert with flashing ROMs/recovery and stuff, but I think I know the basics. So, if I was missing something, please forgive me in advance
I'm trying to install TWRP on my Oukitel K6000 Pro, but can't do it for some reason. The things I tried:
1. Rooting my phone w/ kingroot to install flashify. Kingroot failed to root my phone.
2. Via linux machine, using fastboot command. Fastboot failed installing the recovery (USB debugning was turn on. OEM unlocking was turn on, but I wasn't sure I even needed it). Error message I got: "FAILED (remote: download for partition 'recovery' is not allowed"
3. Using windows 7 and windows 10 machines to install it via SP-flash-tool (USB debuging and OEM unlocking was turned on). The SP-flash-tool did not recognized my phone.
4. Using SP-flash-tool with FWUL live-CD. It did not recognize my phone.
5. Using SP-flash-tool with linux machine. It did not recognize my phone.
As for #3 above, I was trying to install MTK drivers before performing the flash process. I think I got it right (for the win10 machine, I rebooted to a mode without signature check as required), but I'm not sure though.
If anyone can step in and help with that - I would much appreciate it.
Thanks in advance,
Tamir
you need the right drivers and the right adb tool.
Download adb tools of android sdk, google it.
Then download the oukitel drivers-> Driver_Auto_Installer_v5.1453.03, search for those., install them.
Try again, good luck.
Rooting and unlocking your phone will format your phone, beware of losing everything on it.
Btw, never use kingroot. Use latest SP Flashtool Version 1728,
Guide:
Download Magisk V16 or SuperSu to your micro sd on your phone.
--(Download your desired firmware, if you want to upgrade as well. (if you want, not needed, since you only want to root or install twrp)--
Download SPFlashTool compatible TWRP from a site that i can't mention here.
Turn off your phone.
Open Splflashtool, select the Android Scatter file that was downloaded with your twrp.
A little bit under that, select Download Only, and NOT firmware ugprade etc.
Now click Download, connect your turned off phone to your pc.
You should hear a windows sound, look at the tool and DO NOT Disconnect your phone. until a popup with Success and a green Symbol appears.
be patient and let it run. (shouldn't actually take longer than 3-5seconds)
After it is done, press simultaneously the Power and Volume+ Keys until a really small menu on the left side screen appears.
Now you can navigate with the Volume+ Key, from the top to the bottom, in an endless loop.
With the Volume- Key you can select on of the three options:
Recovery <-this is what we want, select it!
Fastboot (not really needed for us)
Normal (normal Reboot - Start of the phone)
You will now see the bootlogo, then the twrp menu will show up.
Now you can Flash Magisk or SuperSu for Root. Wipe Dalvik and cache, Reboot, Enjoy.
Hi,
I have encountered a suddenly dead old device. It was working long time without an issue, but one day it does not start and just a logo is displayed. It was possible to turn off the device or enter the recovery menu. I have found more posts about repairing with some unofficial flash tools or using unofficial ROMs.
I was able to revive the device finally with success and using official tools only, so I would like to share the steps I have used, basically it is about downloading the official ROM from Acer site and flashing it with ADB:
1. You will need Windows computer, I was not able to make the Mac recognise the phone properly, but maybe it is somehow possible.
2. Download official Android 4.4.2 ROM from ACER site: https://www.acer.com/ac/en/GB/content/drivers
enter SNID (check the phone under cover), look in OS category and download, the ZIP file is ~700MB large, do not unzip.
Download also the Drivers and extract it.
No need to download unofficial ROMs or drivers for this phone I think.
3. Download android platform tools from https://developer.android.com/studio/releases/platform-tools and unpack to some directory
4. Install phone Drivers manually from Device manager, use Action/Add device command and navigate to INF in the driver folder.
5. Turn on the phone and star recovery mode (Vol down+Power).
6. Connect the charged device with USB cable.
7. Start cmd.exe and navigate to platform-tools directory, start "adb devices" command, your device should be listed.
If no device is listed, return to driver installation step.
8. start "adb reboot bootloader", phone will reboot, hint about flashing the ROM appears
9. start "adb sideload yourpathto/officialROM.zip
10. wait few minutes until the installation is finished, phone reboots and should work.
11. you are happy
Hey,
2 Years ago my E700 dropped down, since then it does not work anymore. It shows no reaction if i want to start the device.
Could something be broken?
Do you have an idea to fix it?
I'm from Brazil, I came to ask for help, I'm going to use google translator. My phone was in infinite boot, it only starts in fast boot mode, I unintentionally formatted and deleted the system folder. I tried to pass the rom through qfil, it identifies the device but the error appears: sahara protocol failed, at the time of the download. I've tried all possible ways and all the tutorials on the internet but I can't solve the problem. My phone died without a system and I don't know how to solve it, is there another method to flash the rom? could you help me, a light, please!
From 4PDA and using Google Translate:
Faced the problem "download fail sahara fail qsaharaserver fail process fail"
All standard solution methods:
0) Check if the firewood is installed
1) QFIL must be run on behalf of the Administrator.
2) The path to the folder with the firmware is too long and / or contains the Cyrillic alphabet - unzip the firmware along the path C: / firmware and sew again.
3) Use the original cable for firmware;
4) Change the computer or USB port and sew again;
5) Download QFIL from the header, remove the QFIL that is installed now, clean the Program Files (x86) \ Qualcomm, ProgramData \ Qualcomm, AppData \ Roaming \ Qualcomm folders, install QFIL version 2.7.453 and sew again.
6) In Qualcomm’s device manager, the driver may have a triangle with an exclamation mark, reinstall it in the "without certificate authentication" mode and without rebooting, sew the firmware.
7) The file system type is emmc a not ufs, change to ufs, restart QFIL and try to flash the firmware again.
8) Turn on flight mode on the computer
9) Turn off antiviruses
10) After all the described reboot, if it didn’t help
, then didn’t help and in one video from YouTube I saw a way 11) In the Configuration check “Use verbose”
and it worked, I hope it helps
Click to expand...
Click to collapse
Thank you so much for your answer. After two insistent days looking for the solution in various videos, tutorials and everywhere, I finally got it, by sheer luck. I uninstalled the 64-bit qualcomm usb and installed the 32-bit one. I checked these options in the settings: Reset state machine, use verbose and auto preserve partitions. In preserve mode I selected: option 1 and preserved list: option 2. And to my surprise when I clicked on download, everything went well.
Hello everyone! This is my first post, I'm very very new here If I somehow missed a rule or two and shouldn't have posted here or etc DO TELL ME, Im open to anything and I appreciate it! To the point, I won't stretch the topic, I'll tell you how I rooted my Gionee x1 device, and the problems I faced and their solutions. You may ask yourselves or just come reply here, Who even owns that device, Well I own one and I wasn't able to root this device it was hard, so for the other mates out their having bought this piece of brick.
and, there's a reason to why Im writing this topic, do read to the end.
So, to start I first of all researched alot both on google and xda forums for any way of doing it, most of which either didn't work or were not supporting my device(f.e. One Click Root Methods didn't work at all).
1. This post has a reply by ZedLens, which is awesome but to my surprise it didn't work for me.
2. This post BusinessKid is a great tutorial for any MTK Device, but the 3rd step of "The Download Stuff:" I couldn't find the scatter for my device.
3. I've a strict download limit for my internet, so I couldn't download the Stock ROM, so I somehow had to extract it from my device, which I failed why? MTK Droid Tool wasn't able to recognize my device. I diagnosed for all possible reasons for this, bad USB check, bad device port check, wrong process check nothing worked, so at the end of the day I somehow managed to download the Stock ROM of Gionee X1 and EVERYONE HAS TO DO IT IN THE END, you'll really need it anyhow.
Now the rooting process,
Tools/Stuff I used:
1. SP Flash Tool(This thing here, is like your hand during examination)
2. MTK Drivers(Important)
3. Stock Gionee X1 ROM
4. Magisk Manager App
I'll attach the Magisk Patched boot.img here along with the scatter so that you can directly flash the boot img instead of wasting time to download the stock rom and etc etc. also you can reply down here if you need any other file, I'll send it to you somehow :3
NOTE: All the images, links, tools, programs and everything belong to their respective owners!! Everything you are doing with the steps above are STIRCTLY your responsibility, if you do it wrong and brick your device you can't charge me for bricking your device, only you and you will be held responsible for any damage/sucess/etc to your device.
Steps to install:
1. Get Stock boot img
2. Install Magisk Manager (DON'T DOWNLOAD IT FROM ANYWHERE use TopJohnWu's Github)
3. Somehow get the Stock boot img into your Internal Storage or anywhere, where Magisk Manager can find and Patch it, Use adb push, connect usb and copy it to the Internal Storage, ANYHOW.
4. After copying, Open Magisk Manager, you'll find two things on the main screen, one is Magisk which has status infos such as (Installed: ), (SAR: ), (A/B: ) and (RAMDISK: ). Within the same square which contains those status info you'll find a Install click on it.
4.1. After clicking on install you'll get a new menu, select next in the Options Square ignoring the choices there(Preserve AVB 2.0 blah blah) and click Next. Now you'll be in the Methods Square here, you select "Select and Patch a File", now locate to the Image and after successfully locating and selecting it click on Let's Go on the right cornor.
4.2. If your image is patched successfully your log in front of you will look something like this:
- Device platform: armeabi-v7a
- Installing: 23.0 (23000)
- Copying image to cache
- Boot image is signed with AVB 1.0
- Unpacking boot image
- Checking ramdisk status
- Stock boot image detected
- Patching ramdisk
- Repacking boot image
- Signing boot image with verity keys
****************************
Output file is written to
/storage/emulated/0/Download/magisk_patched-buildno_abcde.img
****************************
- All done!
Click to expand...
Click to collapse
4.3. You have your patched boot image!!
5. Now get the patched image back to your pc -.-
6. Prepare yourself to focus, Im not responsible for your bricked device!
7. Goto This XDA Post for Tutorial and Information about SP Flash Tool, MTK Drivers ADB Drivers, etc etc.
8. Download and Install MTK Drivers(Link Credit: Bovirus' this post)
1. You'll find a exe, just execute it and it'll be installed automatically.
Click to expand...
Click to collapse
9. Download and open SP Flash Tool and select Scatter-loading file.
10. Now After you've selected the scatter loading file you'll find there are various selections in front of you, Preloader, lk, boot, recovery and etc etc
10.1. DESELECT or UNSELECT (OR WHATEVER YOU CALL IT) every selection other than boot.
10.2. In the row of boot/bootimg, (remember the patched boot image?) click on LOCATION you'll get a explorer window to locate to the patched boot image, locate and select it. In the last it should look something like this:
https://imgur.com/a/WMbTTAC
10.3. Click on Download in SP Flash Tool and connect the device, see next step.
11. Power Off the device and Remove the battery(See 3. in Issues I faced).
12. Now while pressing the Volume UP and Down Button together, connect the M-USB to your device port. I can't explain this but, firstly connect the USB cable to your pc then to your device haha.
13. You'll hear the device connected sound of Windows(If windows user) and the flashing will start
14. Reboot to OS and Voila! Check your Magisk Manager, your device is now rooted! Do remember to install the Magisk App just below the Magisk Root Check!
Now, issues I faced:
1. Device wasn't connecting to the SP Flash Tool, I reinstalled the MTK Drivers but it didn't do any change.
2. FastBoot flashing didn't work, I opted for SP Flash Tool later.
3. Device was starting into Factory mode and/or Recovery mode whenever I pressed Volume UP/Down and then connecting the device through USB, removable battery came to my rescue. Removed the battery, pressed both volume Up and Down button and then connected the USB.
NOTE: Again, all the images, links, tools, programs and everything belong to their respective owners!! Everything you are doing with the steps above are STIRCTLY your responsibility, if you do it wrong and brick your device you can't charge me for bricking your device, only you and you will be held responsible for any damage/success/etc to your device.
Links for boot.img and scatter file: Here is the MediaFire link, I've scanned the files with my Quick Heal Total Security I'm not those multidadoffspring who likes to spread virus/malware etc. and Here is the VirusTotal Link.
Feel free to tell me my errors and mark how can I improve, I appreciate it
And also, if you need any other file from the Stock ROM of the same device, do tell me here or DM at my insta: heartwastaken
Sorry for my bad English.
Thank you!!
Have a great Day
-Vish
After updating to latest update, now the phone only shows background with either the "LOCKED" or "UNLOCKED" icon on the top and is constantly flickers on/off every second.
No response on the touchscreen either.
Attached video
Am currently downloading a stock rom (https://www.mediafire.com/file/bu4s...21062302340000_%28Mobileguru4.com%29.zip/file).
In the meantime, I installed the drivers for realme and the Realme Flashtool. Plugged in the phone to the PC using the cable however, the device is not recognized by the Realme Flashtool software, or is not "detecting" the phone.
(The driver I installed was this: https://www.mediafire.com/file/d3xf...river_Setup_V2.0.1.1_MobileGuru4.com.zip/file)
I have a guess on what it might be that's causing it (inside the developer settings option, sensors option). Not sure how to turn that **** off without being able to access the phone.
Scorpionish said:
Am currently downloading a stock rom (https://www.mediafire.com/file/bu4sjesfikq74dg/RMX2085_RMX2086export_11_C.07_2021062302340000_%28Mobileguru4.com%29.zip/file).
In the meantime, I installed the drivers for realme and the Realme Flashtool. Plugged in the phone to the PC using the cable however, the device is not recognized by the Realme Flashtool software, or is not "detecting" the phone.
(The driver I installed was this: https://www.mediafire.com/file/d3xf...river_Setup_V2.0.1.1_MobileGuru4.com.zip/file)
Click to expand...
Click to collapse
Download Driver Booster app (free version), run in and find Android drivers option and install. It will clear most of the driver issues.
Realme Flashing tool is not working and no other flashing tool worked forme, only fastboot method is worked good
Llatest stock images not having partitions of System and Vendor, they may be userdata and others.
Install "Minimal ADB Fastboot" and then download latest Stock OFP file.
Erase Data, if possible flash OrngeFox / custom recovery and format the phone.
Download this OFP to Scatter format (Link: https://softwarerom.blogspot.com/2021/03/ofp-file-cmd-converter-ofp-file-extract.html) and unzip it
Copy Latest Stock OFP to this folder and Just push the OFP to Qualcomm... Exe file, it will open a command prompt and create a folder contains some files & folder including Images,
Copy all the image files to Minimal ADB Fastboot folder, open Minimal ADB fastboot command prompt and copy all the images like, recovery, boot, vbmeta, userdata and so on using "Fastboot Flash Name Name.img" commands and reboot.
It worked for me.
The problem has reoccurred, exact same problem issue (browsing playstore, exited, closed phone, a moment later after opening up the phone) same thing happened, screen just flickering on&off.
I dont get how such problem could occur, now am certain its not the (sensor thing) cus this time (after PHONE WIPE) I did not play with any of those settings or (dev settings).
Honestly, if any1 experienced this, or might have a clue whats causing it.
[email protected] said:
Download Driver Booster app (free version), run in and find Android drivers option and install. It will clear most of the driver issues.
Click to expand...
Click to collapse
Its not a drivers issue, was able to plug in phone after having wiped the phone data (a complete reset), but did reinstall just incase, thx.
Also, I dont see how that fixes the issue (its a stock firmware)
Phone was working just fine after hard reset/wipe.. for a few months that is.