Related
Development for CWM for this device has begun!
Head over here to lend a hand, or just check it out
Hello huawei users, and welcome to my second 'Root your mediapad 7 youth' thread
Find the original one here
The only difference between this thread and the one linked above is the tool used
This one uses Kingo Android root(English), while the one in the other thread uses Vroot(Chinese)
Of the two, I believe Kingo root is easier to use, as it has step by step instructions in English
DISCLAIMER
1.Neither me nor Kingo is in anyway responsible for anything that does or does not happen to your device as a result of following these instructions. This includes but is not limited to: bricking your device, abnormal functioning of your device and voiding of warranty. Continuing with this guide is accepting these terms.
2. Rooting your device will most likely void your warranty. You have been warned.
3. This guide is intended solely for the device mentioned in the title. It is not meant for use with any other device, and may have unwanted effects.
That being said, let's get on with it
Prerequisites
1. Fully charged PC
2. Fully charged Huawei Mediapad 7 Youth (s7-701u)
3. Kingo Android Root. Find at this link
4. USB cable
Steps
1. Install and setup Kingo
There is a simple, standard windows wizard to follow. Nothing complicated.
2. Plug in your device into your PC
At this point, make sure kingo is open
3. Follow the on-screen instructions
These include enabling USB Debugging, clearly demonstrated on-screen
When it's done rooting, it will reboot, and you are rooted with SuperSU installed.
It's really that simple.
It didn't work
I've installed king root. I had to download HiSuite only then it started to do its work. Then again it still failed.. Although the app tells 'Root Successful' and restarted the tab, it still failed to root... help please
Domero said:
I've installed king root. I had to download HiSuite only then it started to do its work. Then again it still failed.. Although the app tells 'Root Successful' and restarted the tab, it still failed to root... help please
Click to expand...
Click to collapse
You are not alone, got the same issue here, i've tried vroot as well but my tab hangs and never go anywhere.
root failed
i tried those steps but it shows root failed. please help
huawei s7-721u root
I'm having huawei s7-721u model type..and i have rooted it..i need to install a new rom to it. can u tell me how ...anything text me through my whatsapp +60149447355 or mail me to my fb Yoges Waran Vasudavan.tx
Domero said:
I've installed king root. I had to download HiSuite only then it started to do its work. Then again it still failed.. Although the app tells 'Root Successful' and restarted the tab, it still failed to root... help please
Click to expand...
Click to collapse
whhw31 said:
You are not alone, got the same issue here, i've tried vroot as well but my tab hangs and never go anywhere.
Click to expand...
Click to collapse
fayaz faiyu said:
i tried those steps but it shows root failed. please help
Click to expand...
Click to collapse
I'm sorry to hear that you couldn't root your devices
Run through this FAQ to see if your computer and device are in the same config as mine
1. Do you have the Android SDK installed?
If not, go here : https://developer.android.com/sdk/installing/index.html and choose the 'eclipse ADT' option
2. Do you have the Java Development Kit Installed?
If not, go here : http://docs.oracle.com/cd/E19182-01/820-7851/inst_cli_jdk_javahome_t/index.html and follow the instructions
3. Do you have ADB configured?
If not, go here : http://androidcentral.us/2013/08/how-to-install-android-adb-and-fastboot-on-windows/
If following the above steps still does not help, PM me, hang in there, and I'll try to get back to you :good:.
@whhw31 I'm surprised that neither Kingo nor Vroot worked for you . I'll look ino this and see what I can come up with.
I'm working on a cwm port, but i am not done yet. I will alert you all when i successfully port it :laugh:.
When that is done, flashing SuperSu.apk + supersu should be a piece of cake .
Till then, just hang in there a little longer.
Success????
hi~ i have success install and success roots, but when its keep restart n root n restart n root...
its normal??? really successful roots????
---------- Post added at 06:06 PM ---------- Previous post was at 06:01 PM ----------
hi~ i have success install and success roots, but when its keep restart n root n restart n root...
Lastly shown ROOTS Status: NO
its normal??? really successful roots????
Hey guys. I've rooted a few phones before, but I've recently purchased this Posh Equal S700a phablet running Android 4.4.2 Kit Kat. However, I cannot root this device for anything in the world. I asked in the XDA assist forum and was directed to this subforum. I've searched around the internet and can barely find anything on the phone, let alone a proper rooting method for it. Does anyone know of a way to root this phone? So far I've tried:
iRoot
-----------
I've tried both the mobile APK and Windows application. The Windows application doesn't detect my phone, even though I have the drivers properly installed. Only USB_DIAG shows next to the picture of the iPod USB cable, but when I click the button to start the rooting, it says no phone is found. The mobile version of the app claims that the phone has been successfully rooted when I press the Root Now button, but the phone never actually roots. Sometimes I will get their version of the SuperUser app installed to my device, but after running a Root Checker app, it says that my phone still isn't rooted. As a matter fact, if I run the iRoot SuperUser app, it will even tell me that the phone isn't rooted and that I will need to run the iRoot application again to reroot the device (but this never works).
Kingo
---------
Kingo actually detects my device and gets to the rooting process. However, when I get to the fastboot menu, the phone will reset once more into the fastboot mode, then restart one last time to take me back to the homescreen. By that time, the Kingo pc app will say that the process has timed out and ask for an email address so that they can send the report to the developers.
Root Genius
---------------
Did 15 minutes of resetting and installing suspicious looking apps. I deleted them and ran a virus scan after the application failed. Anyway, the application kept saying that it successfully added files and was transferring the necessary root files to my phone, etc. Every 5-10%, the device would reset and keep attempting to do the same thing before ultimately quitting at around 80% and saying something along the lines of "Your phone is really tough, do you want to manually root?". From there I get directed to a site in Chinese.
Towel Root
----------------
Device not supported
FramaRoot
--------------
Device not supported
There was also another oneclick flash tool that I tried, but I can't remember the name of it right now. I will have to check when I get back to my Windows desktop. That app also hung early in the process as well after detecting the phone and identifying the basic info such as model number etc.
Did you ever figure this out?
I just go the S700A as a backup phone and would like to root it or upgrade to 5. Did you every figure it out?
S700 equal posh 7" .. Only have 1 home screen??
How do I get more
hi
CaptainDucttape said:
I just go the S700A as a backup phone and would like to root it or upgrade to 5. Did you every figure it out?
Click to expand...
Click to collapse
somebody knows how update or find stock firm for this phone?
I rooted using Dr.fone, now I need a ROM - help XDA, please!
6/16/18: I had Dr.fone installed on myPC so I USB'd into my Posh Mobile Equal L700 and the app found it. It did give me choice of only a "Mediatek" or "Samsung" phone. I was brave and chose Mediatek. The app ran for awhile then showed Root Successful.
Just to check I downloaded RootChecker app from Google Play Store and it shows the phone is rooted. Also, Malwarebytes now keeps giving me the message it is rooted and may be unstable (Oh yippee, that makes me feel good....not.)
Now I am stuck at flashing a new ROM on this device and can't find one that works. Search on YouTube for ROM for Posh Mobile Equal L700 by Sheena Rodriguez - I am prevented from including the actual URL in this posting b/c I have not done 10 posts yet. However, every time I try it, (and apparently I am to download directly into my phone and not into my PC then use a USB to get it to work, but I'm trying that next, even though I have no idea if that is a real "thing"), it comes with a "blocker" page that tells me I need to "try" one of two apps and then the install will finish. That seems way off to me.
Does anyone out there have a reliable ROM to refer me to? I am absolutely raw new to this so I really need a "do this FIRST, second, etc." instructions.
P.S. - a tech from Posh Mobile just told me this phone is no longer supported, even though I'm still within my one-year warranty, and then when I questioned him further he told me Posh Mobile no longer exists. I think the phone itself has decent bones and could still have a lot of life in it, but it REALLY needs a new ROM....
Help!
-sincerely, geogat.
Got this device and so far there's very little I've found for it so I want to share my findings.
*ROOT can be obtained using king root.
*link to source code http://opensource.lge.com/osSch/list?types=ALL&search=lgl22
Ive tried all of the methods to wipe out king root and get this thing switched over to super su. here are the only instructions that i have found that work, only thing I can add to this info is, i used pdanet for drivers and phone has to be in "ptp" mode for any of it to work.
http://forum.xda-developers.com/showpost.php?p=60669196&postcount=1
Remove King root
How exactly did you get KingRoot completely off the phone? I have tried a couple of times even through adb and it will not go away lol.
I am assuming that you followed just the "HOW TO INSTALL BUSYBOX, SUPERUSER, AND SU BINARIES" part of that post or did you do the whole thing?
Also have you managed or tried to get this thing to boot into download mode? Not sure if it even has it as an option but i tried for like 8 hours last night to get it to go, the best i found was the hard button combo from lg leon for recovery that worked.
D34DH4CK said:
How exactly did you get KingRoot completely off the phone? I have tried a couple of times even through adb and it will not go away lol.
I am assuming that you followed just the "HOW TO INSTALL BUSYBOX, SUPERUSER, AND SU BINARIES" part of that post or did you do the whole thing?
Also have you managed or tried to get this thing to boot into download mode? Not sure if it even has it as an option but i tried for like 8 hours last night to get it to go, the best i found was the hard button combo from lg leon for recovery that worked.
Click to expand...
Click to collapse
My apologies for the delayed response, link was updated to the correct one. I've been playing the find a job game lately and has taken priority. Also this thread wasn't on my watch threads list so I've not gotten any notification of your question, I've fixed this as well. Again thank you for your patience.
Got kingroot removed completely and installed supersu with terminal emulator ......now waiting for cyanogenmod....
So is there a cwm or twrp for this yet?
Sent from my XT1028 using XDA Premium 4 mobile app
No custom recovery to my knowledge at the moment
Is king root an app on phone or from computer
Sent from my XT1028 using XDA Premium 4 mobile app
ozz200127 said:
Is king root an app on phone or from computer
I believe I had to use the computer, it's been a while
Click to expand...
Click to collapse
Do u know if u can use xposed on this phone
Sent from my XT1028 using XDA Premium 4 mobile app
At the time of post no, xposed has come a long way since then though
I just used xda RootJunky's Amazon Fire 5th Gen SuperTool (April 6, 2016 version), JUST AS IT IS, to root my Tracfone LG L22C Power. With only a couple of mouse clicks.
Even if you are already rooted with KingRoot, you can use this tool to uninstall KingRoot and install SuperSU. (Just run the tool, let it re-install KingRoot, don't run KingRoot but hit Enter on the SuperTool to then uninstall KingRoot and install SuperSU).
Tracfone LG L22C Power info:
Model Number: LGL22C
Android version: 5.0.1
Kernel version: 3.10.49
Build number: LRX21Y
Software version: L22CV10a
The SuperTool batch file script rooted the phone with KingRoot and then uninstalled KingRoot and installed SuperSu.
I have since installed ES File Manager, Titanium Backup, Link2sd on the phone. Root is totally working. Rooted with only a couple of clicks!
Just enable Developer options on LG L22C (by tapping phone Build Number 7 to 10 times [Settings, About Phone, Software info, Build Number (tap 7 to 10 times)]), enable USB debugging on L22C in the Developer options settings.
Connect L22C to Windows 10 with a USB data cable (I used the USB 2.0 port). When screen message on the L22C mentions MTP mode, tap that and change to PTP mode on the phone.
Install RootJunky's SuperTool to the Windows 10 desktop.
Run RootJunky's SuperTool (Amazon-Fire-5th-gen.bat) You may have to read the instructions on the pages below and install adb drivers. Pick option #6 Root. Choose Option #3: version 5.1.2.
Press enter and KingRoot will be installed on the phone from the SuperTool. (approve any messages that appear on phone screen) Now don't touch the PC SuperTool until the phone is rooted.
Open KingRoot on the phone and run it. You may have to run KingRoot several times and the phone may reboot. Just keep running KingRoot until the LG L22C is rooted. After KingRoot reaches 100%, then press ENTER on the PC.
The SuperTool will now uninstall KingRoot and install SuperSU on the phone.
Choose NORMAL SuperSU install on the phone when prompted. When SuperSU is installed, reboot the phone. Disconnect data cable.
After reboot the LG L22C Power is rooted. There will be a request by SuperSU to upgrade. Approve it. You can now install Titanium Backup, Link2sd, ES File Manager, etc. Your phone is rooted. As easy as that. THANKS ROOTJUNKY!!!
Info and links to Download RootJunky's SuperTool at these pages:
Amazon Fire 5th Gen [SuperTool] Root, Google play install, block ota updates and more
http://forum.xda-developers.com/amazon-fire/development/amazon-fire-5th-gen-supertool-root-t3272695
"AmazonFire5thGenSuperTool.zip"
http://rootjunkysdl.com/files/?dir=SuperTool
Robo-rooter said:
I just used xda RootJunky's Amazon Fire 5th Gen SuperTool (April 6, 2016 version), JUST AS IT IS, to root my Tracfone LG L22C Power. With only a couple of mouse clicks.
Even if you are already rooted with KingRoot, you can use this tool to uninstall KingRoot and install SuperSU. (Just run the tool, let it re-install KingRoot, don't run KingRoot but hit Enter on the SuperTool to then uninstall KingRoot and install SuperSU).
Tracfone LG L22C Power info:
Model Number: LGL22C
Android version: 5.0.1
Kernel version: 3.10.49
Build number: LRX21Y
Software version: L22CV10a
The SuperTool batch file script rooted the phone with KingRoot and then uninstalled KingRoot and installed SuperSu.
I have since installed ES File Manager, Titanium Backup, Link2sd on the phone. Root is totally working. Rooted with only a couple of clicks!
Just enable Developer options on LG L22C (by tapping phone Build Number 7 to 10 times [Settings, About Phone, Software info, Build Number (tap 7 to 10 times)]), enable USB debugging on L22C in the Developer options settings.
Connect L22C to Windows 10 with a USB data cable (I used the USB 2.0 port). When screen message on the L22C mentions MTP mode, tap that and change to PTP mode on the phone.
Install RootJunky's SuperTool to the Windows 10 desktop.
Run RootJunky's SuperTool (Amazon-Fire-5th-gen.bat) You may have to read the instructions on the pages below and install adb drivers. Pick option #6 Root. Choose Option #3: version 5.1.2.
Press enter and KingRoot will be installed on the phone from the SuperTool. (approve any messages that appear on phone screen) Now don't touch the PC SuperTool until the phone is rooted.
Open KingRoot on the phone and run it. You may have to run KingRoot several times and the phone may reboot. Just keep running KingRoot until the LG L22C is rooted. After KingRoot reaches 100%, then press ENTER on the PC.
The SuperTool will now uninstall KingRoot and install SuperSU on the phone.
Choose NORMAL SuperSU install on the phone when prompted. When SuperSU is installed, reboot the phone. Disconnect data cable.
After reboot the LG L22C Power is rooted. There will be a request by SuperSU to upgrade. Approve it. You can now install Titanium Backup, Link2sd, ES File Manager, etc. Your phone is rooted. As easy as that. THANKS ROOTJUNKY!!!
Info and links to Download RootJunky's SuperTool at these pages:
Amazon Fire 5th Gen [SuperTool] Root, Google play install, block ota updates and more
http://forum.xda-developers.com/amazon-fire/development/amazon-fire-5th-gen-supertool-root-t3272695
"AmazonFire5thGenSuperTool.zip"
http://rootjunkysdl.com/files/?dir=SuperTool
Click to expand...
Click to collapse
Fantastic thank you! Will try this tomorrow on brothers phone
I have a script to force xposed for devices without a recovery. Will give it a try on this phone and let everyone know
SyCoREAPER said:
Fantastic thank you! Will try this tomorrow on brothers phone
I have a script to force xposed for devices without a recovery. Will give it a try on this phone and let everyone know
Click to expand...
Click to collapse
Without recovery, I have not tried anything crazy. Just installed Link2sd, Titanium backup and ES File Manager. Don't want to take the chance of bricking this phone.
Robo-rooter said:
Without recovery, I have not tried anything crazy. Just installed Link2sd, Titanium backup and ES File Manager. Don't want to take the chance of bricking this phone.
Click to expand...
Click to collapse
Right now it's ~$30 so I will take the risk for everyone
Going to go pick it up tomorrow, root and try and push xposed to it.
SyCoREAPER said:
Right now it's ~$30 so I will take the risk for everyone
Going to go pick it up tomorrow, root and try and push xposed to it.
Click to expand...
Click to collapse
There's $60 down the $41773R, xposed failed, bricked. Root went perfectly, thank you for the guide
Officially fully bricked since I can't hard reset or get I to download mode
SyCoREAPER said:
There's $60 down the $41773R, xposed failed, bricked. Root went perfectly, thank you for the guide
Officially fully bricked since I can't hard reset or get I to download mode
Click to expand...
Click to collapse
Check out this website link. These guys might be able to help with the bricked Tracfone:
Tracfone Developers website:
http://tracfonedevs.createaforum.com/bricked-phone-support/
http://tracfonedevs.createaforum.com/index.php
Robo-rooter said:
Check out this website link. These guys might be able to help with the bricked Tracfone:
Tracfone Developers website:
http://tracfonedevs.createaforum.com/bricked-phone-support/
http://tracfonedevs.createaforum.com/index.php
Click to expand...
Click to collapse
Thanks but from what I am seeing its a permanent brick. Sucks. Oh well, took one for the community to attempt to have xposed. Now everyone knows not to try for sure since this stupid phone apparently doesn't even have fastboot , download or accessible stock recovery.
Confirmed by LG; Bricked. They skimped and did not add a way to get to Fastboot/Download mode.
Also everyone be aware that this screen is prone to burn-in. I have a slight ghosting of the LG boot screen burned in
Has anyone found anything for this phone
Here: http://forum.xda-developers.com/leon/how-to/root-lg-leon-lg-power-device-adb-t3383007
Greetings devs, advanced users and all those wannabes like me. the LG POWER L22C has been my only successful root out of four different devices, from different manufacturers...go figure. Anyway, root was achieved on my LG POWER L22C ( Straight Talk, VZW) via Kingroot 4, I believe ( Chinese one). Things however, went a bit sideways after that. Kingroot is dug in like a rabid, star- nosed mole rat, and its somehow interfering with the binary update for SuperSU. I would like to re-root and start anew. Trouble is, I can't seen to find a TWRP or CWM specific to this model. I've tried CyanogenMod, TWRP, Resurrection and I don't know how many other, less known CR's. Here's her specs:
LG POWER LGL22C
Android 5.0.1
Kernal 3.10.49
Build: LRX21Y
Software version: L22C VIDa
Anyone out there has some info on this, and I'd be much obliged for sharing.
Thanks,
CinephilCinephile74
CaPpY
P.S. While we're on the subject of LG, the FIESTA LTE/ Power X2 ( same FCC ID's) which differ only in processor architecture, is proving to be most stubborn in rooting as well. I'll see of there's a forum for this model
. Not a bad phone at all, considering her loadout. Only really lacking in GPU. Phenomenal battery life, due to a nearly 5000 mah battery.
Cinephile74
(CapPy)
***UPDATE 0428 Saturday 24 June***
I'm in trouble again, folks. I've been trying to improve the quality of my root experience with this lil' guy (just found out it is the LG LEON), and I'm also studying to root a ZTE QUEST N817(QLink) and the newest addition, the LG FIESTA LTE, in which even the XDA app identified as an LGE X POWER 2. In fairness, it is, in fact, an X power 2 according to the FCC ID. Only differences I know of are, the XP2 uses a single processor with 8 cores, while the "FIESTA variant" uses a quad set-up with ARMv7 architecture. Bear with me, the point of all this is nigh. Ad to all this, a moderate problem with insomnia. Long story short (TOO LATE), I was installing an app, I believe that was SD CardFix...restores R\W access to 4.+. And ONLY Kit Kat. I had theWong device in my hand, installed this app into 5.0. My poor LG L22C is now stuck at the initial LG screen. Tried SAFE/RECOVERY modes, no joy. Just stuck. This must be the famous soft brick I've been so weary of. Arms mute line a hard bricked device though, because ONLY battery removal powers down the internal thing.
Any answers, explanations, solutions and/or advice Is MOST appreciated!
PEACE ✌
Ok so I have never made TWRP before and I would like to build it for the LG Power L22C.
I have made ROMs before including like 10 LG Ally ROMs and about 2 LG Ultimate 2 ROMs and 3 Droid X ROMs.
But I would really like some help building TWRP for the L22C. The device has a lot of potential for development but it just needs a recovery and stock ROM.
I have ubuntu all set up with 70 GB of space. I know I need it to build. I also have a system dump with me.
Any easy to follow guides I could use? Thanks [emoji3]
Sent from my LGL22C using Tapatalk
rcunningham said:
Ok so I have never made TWRP before and I would like to build it for the LG Power L22C.
I have made ROMs before including like 10 LG Ally ROMs and about 2 LG Ultimate 2 ROMs and 3 Droid X ROMs.
But I would really like some help building TWRP for the L22C. The device has a lot of potential for development but it just needs a recovery and stock ROM.
I have ubuntu all set up with 70 GB of space. I know I need it to build. I also have a system dump with me.
Any easy to follow guides I could use? Thanks [emoji3]
Sent from my LGL22C using Tapatalk
Click to expand...
Click to collapse
http://forum.xda-developers.com/showthread.php?t=1943625
How's the recovery coming along?
rootmob23 said:
How's the recovery coming along?
Click to expand...
Click to collapse
It's not done yet cause it gets stuck on the TWRP loading screen.
Sent from my LGL41C using Tapatalk
Manage to bootloop my LG power somehow, with no system modifications yet. And with no backup. Going to see if I can still get a replacement under warranty, but very interested in if you manage to do this.
I might just cave in and buy a OnePlus 2 or something however.
Ended up buying a Moto X Pure, has any progress been made or is this considered dead, and the phone not so worth it?
I just used xda RootJunky's Amazon Fire 5th Gen SuperTool (April 6, 2016 version), JUST AS IT IS, to root my Tracfone LG L22C Power. With only a couple of mouse clicks.
Tracfone LG L22C Power info:
Model Number: LGL22C
Android version: 5.0.1
Kernel version: 3.10.49
Build number: LRX21Y
Software version: L22CV10a
The SuperTool batch file script rooted the phone with KingRoot and then uninstalled KingRoot and installed SuperSu.
I have since installed ES File Manager, Titanium Backup, Link2sd on the phone. Root is totally working. Rooted with only a couple of clicks!
Just enable Developer options on LG L22C (by tapping phone Build Number 7 to 10 times [Settings, About Phone, Software info, Build Number (tap 7 to 10 times)]), enable USB debugging on L22C in the Developer options settings.
Connect L22C to Windows 10 with a USB data cable (I used the USB 2.0 port). When screen message on the L22C mentions MTP mode, tap that and change to PTP mode on the phone.
Install RootJunky's SuperTool to the Windows 10 desktop.
Run RootJunky's SuperTool (Amazon-Fire-5th-gen.bat) You may have to read the instructions on the pages below and install adb drivers. Pick option #6 Root. Choose Option #3: version 5.1.2.
Press enter and KingRoot will be installed on the phone from the SuperTool. (approve any messages that appear on phone screen) Now don't touch the PC SuperTool until the phone is rooted.
Open KingRoot on the phone and run it. You may have to run KingRoot several times and the phone may reboot. Just keep running KingRoot until the LG L22C is rooted. After KingRoot reaches 100%, then press ENTER on the PC.
The SuperTool will now uninstall KingRoot and install SuperSU on the phone.
Choose NORMAL SuperSU install on the phone when prompted. When SuperSU is installed, reboot the phone. Disconnect data cable.
After reboot the LG L22C Power is rooted. There will be a request by SuperSU to upgrade. Approve it. You can now install Titanium Backup, Link2sd, ES File Manager, etc. Your phone is rooted. As easy as that. THANKS ROOTJUNKY!!!
Info and links to Download RootJunky's SuperTool at these pages:
Amazon Fire 5th Gen [SuperTool] Root, Google play install, block ota updates and more
http://forum.xda-developers.com/amazon-fire/development/amazon-fire-5th-gen-supertool-root-t3272695
"AmazonFire5thGenSuperTool.zip"
http://rootjunkysdl.com/files/?dir=SuperTool
So I as successfully able to root the phone using the Windows version of Kingo Root and then installed Super Su and Busy Box but I can't get a recovery to work on it, yet.....would love a Recovery like TWRP or Phil's and CM13 port for this phone.
Finally got it rooted with KingRoot
Just noticed that the build.prop has the ro.build.id-LMY47V
That's the 5.1.1 for the 2013 Nexus 7
OldMansGhost said:
Finally got it rooted with KingRoot
Click to expand...
Click to collapse
Hi I would to know how you rooted the Coolpad Rogue 3320A. I was looking at Kingo root and KingRoot and they dont give good instructions.
I tried the android versions of both KingRoot and Kingo Root without success. The Windows version of Kingo Root failed but the Windows version of KingRoot succeeded in rooting my Coolpad Rogue 3320A.
The Kingo Root Windows app gives instructions in English when you run it. Which are to connect the phone to the computer with a USB cable and enable "USB debugging" in the phone's "Settings" under "Developer options'. Then click the ROOT button when it appears. KingRoot is in Chinese, but I just followed the same procedure.
To get "Developer options" to show in the phone's settings , you need to give 7 or 8 taps to the "Build number" under "About phone" in the phone's "Settings".
Before I tried rooting I also ran COOLPAD-140926-SETUP.EXE in the CD Drive labeled "Coolpad_USB_Driver" that shows up in Windows Explorer when the phone is connected to the PC by USB cable. I also installed minimal ADB and Fastboot and Google USB drivers using 15 seconds ADB Installer v1.3 http://forum.xda-developers.com/showthread.php?p=48915118 But I think that they may not have been necessary.
The version of Windows KingRoot I had success with was KingRootSetup_v3.1.0.1125_105002.exe downloaded from kingroot.net
There's a setting in the developer options to allow the bootloader to be unlocked. I've not tried to fastboot to work yet.
"Vanilla" ROM or at least vanilla dialer/phone apps?
I'm interested in some kind of vanilla dialer/phone/telecom app set (5.1.1 based) or a full ROM that's AOSP so that I can toss out T-Mo's "Wi-Fi Calling" and use the built-in Android SIP client with its normal configuration screens.
If anyone has accomplished the same with this device or any other T-Mo 5.1 based device, please let me know. I'd really like to be able to configure the system dialer to connect to my SIP PBX directly rather than use a half dozen hacks to give me half-working VoIP calling of my own.
(Note: If there's a T-Mo 4.4 based image out there, that would suffice, as I can at least make VoIP apps intercept dial requests, which T-Mo Wi-Fi Calling prevents on 5.1. This device shipped with 5.1, but it might be possible that a similar model's ROM image might work on this as well.)
/system image
anyone with a rooted 3320a that might be able to provide me with a stock(or rooted stock) image of /system? i managed to softbrick my device after rooting and i forgot to do a dd of the system partition before mucking around in it
thanks in advance
Root Genius Might Work
venuspcs said:
So I as successfully able to root the phone using the Windows version of Kingo Root and then installed Super Su and Busy Box but I can't get a recovery to work on it, yet.....would love a Recovery like TWRP or Phil's and CM13 port for this phone.
Click to expand...
Click to collapse
My Arise don't have a custom recovery either. This kind of disappoints me, as this phone is a good phone for the price.
However, I thought I'd share with you guys that Root Genius may also work to root the Rogue as it does root my Arise. (I don't own a Rogue, so I can't confirm this.) It's always better to have more than one way to root your phone safely right?
Kingroot
mcduffy said:
I tried the android versions of both KingRoot and Kingo Root without success. The Windows version of Kingo Root failed but the Windows version of KingRoot succeeded in rooting my Coolpad Rogue 3320A.
The Kingo Root Windows app gives instructions in English when you run it. Which are to connect the phone to the computer with a USB cable and enable "USB debugging" in the phone's "Settings" under "Developer options'. Then click the ROOT button when it appears. KingRoot is in Chinese, but I just followed the same procedure.
To get "Developer options" to show in the phone's settings , you need to give 7 or 8 taps to the "Build number" under "About phone" in the phone's "Settings".
Before I tried rooting I also ran COOLPAD-140926-SETUP.EXE in the CD Drive labeled "Coolpad_USB_Driver" that shows up in Windows Explorer when the phone is connected to the PC by USB cable. I also installed minimal ADB and Fastboot and Google USB drivers using 15 seconds ADB Installer v1.3 http://forum.xda-developers.com/showthread.php?p=48915118 But I think that they may not have been necessary.[/Q UOTE] I opens kingroot in my browser and used it for translation
Click to expand...
Click to collapse
hi guys,i av rooted coolpad 3320a with kingroot windows version but when i try to unlock with sigma box it says root the phone first. Anyone with a solution pliz help. Thanks in advance
KingRoot (Android version) worked for me
mcduffy said:
I tried the android versions of both KingRoot and Kingo Root without success. The Windows version of Kingo Root failed but the Windows version of KingRoot succeeded in rooting my Coolpad Rogue 3320A.]
Just another data point. . .
KingRoot (Android app) v4.9.0 142 worked on this Coolpad:
Model: 3320A
Android: 5.1.1
Baseband: GW_T2_01134._01
Kernel: 3.10.49 (08/10/2015)
Build: 5.1.157.00.T2.150810.LMY47V
Happy camper -- For $20 this is a great no-tears tinkering platform.
Click to expand...
Click to collapse
myoshinaga said:
mcduffy said:
I tried the android versions of both KingRoot and Kingo Root without success. The Windows version of Kingo Root failed but the Windows version of KingRoot succeeded in rooting my Coolpad Rogue 3320A.]
Just another data point. . .
KingRoot (Android app) v4.9.0 142 worked on this Coolpad:
Model: 3320A
Android: 5.1.1
Baseband: GW_T2_01134._01
Kernel: 3.10.49 (08/10/2015)
Build: 5.1.157.00.T2.150810.LMY47V
Happy camper -- For $20 this is a great no-tears tinkering platform.
Click to expand...
Click to collapse
So what is the final verdict?
Click to expand...
Click to collapse
Hello, but I have a question. Is busybox OK on this device? I am afraid that installing it may brick the device
got it working with kingo root, but only after kingroot said it worked. otherwise kingo root kept freezing. havent been able to get supersu installed but kingo root works just fine
I was able to root the coolpad rouge without a computer. I'm going to create an account and upload the tut. -cyphermil
myoshinaga said:
So what is the final verdict?
Click to expand...
Click to collapse
You CAN root this with the Kingroot apk.
I'm new and can't post links so to make the links below work just abbrev the http and add a colon.
As soon as I can post links I will fix them.
PROOF:
Hypertexttransferprotocol//imgur.com/a/SXmMc
Here's what I did:
1) download latest kingroot Hypertexttransferprotocol//androidmtk.com/download-kingroot-application
2) enable USB debugging in developer options
3) enable OEM boot loader unlock in developer options
6) enable unsigned APKs
7) install kingroot apk
8) run kingroot
9)?
10) PROFIT
Will update with better details later. Sorry for mistakes and formatting I'm on my rooted coolpad rouge.
Kotetsukun said:
Hello, but I have a question. Is busybox OK on this device? I am afraid that installing it may brick the device
Click to expand...
Click to collapse
Busybox is safe to install. Will post screenshots when I am able to include links
Never mind. I am happily satisfied anyways. Thank you.
Coolpad Rouge 3320A
So im am writing this post via on my mac...
So i want to root my phone but when i tried to install king root i got to 90 percent then the app closes its self and disables my wifi unless i reboot my phone.
im just need to root my phone for to install xposed framework and installer
~Ninja, Aug/13/16