Related
Hello, I have a phone LG L4 II (e465g) I made a flash ROM program with LG Mobile Support Tool. Instead of placing the company ROM, place a generic.
The phone then lit that perfectly. You remove the battery to insert the SIM, not lit anymore.
1) DO NOT ENTER DOWNLOAD MODE
2) detects and much searching, I managed to detect it as "MTK USB PORT"
3) I try to flash it with SP FlashTool, the issue is that I have some files.
4) Reading out there I was told that my problem was to change the rom, without unlocking the bootloader.
In this program need a rom say all unarmed. Thing that this phone is a KDZ file, decompress still trying different ways, I can not get the necessary files.
I need a rom of this phone that has the PRELOADER, DSP_BL, and their respective scatter.
Supposedly this backup is done with another application called DroidTools.
Taking the backup of the rom with those files only, I think I can recover all the phone and start again detect and enter download mode.
If anyone has this rooted phone and can make a backup of your phone and spend those 3 things, I would be of tremendous help.
Should get a scatter MT6575 is a micro of this cell.
Many thanks and sorry for my English.
do you fix your phone because i have same probleme
hello..
i was trying to root and install cwm.. and i unfortunately installed the wrong recovery now my phone does not start.. not even in recovery mode..
it shows a messege "Download and install package...........etc. press volume up to proceed down to cancel" pressing the keys don't do any thing phone gets off after a while.. i have a backup of stock recovery and boot but i think both files are same its 20mb both.. i had used Flashify to backup. and i can't even enter fastboot my pc does not detect my phone perhaps because i don't have the drivers... is it possible to fix my phone or its dead for ever..:crying::crying::crying::crying::crying::crying::silly::silly::crying:
i was following this method here.. www[dot]gizdev[dot]com/easy-way-to-root-coolpad-dazen-1/
same problem here
same problem here I try all method from google but I can't my suggestion to go service centre
fixed dazen 1
m.sajid969 said:
same problem here I try all method from google but I can't my suggestion to go service centre
Click to expand...
Click to collapse
Hey.. I have fixed my dazen 1 you can do so... Its easy.. Head to the following thread...
http://forum.xda-developers.com/che...g-boot-img-recovery-img-t3170809#post62587856
New thread..
http://forum.xda-developers.com/showthread.php?t=3236337
can we use custom recovery of same chipset phones
Hey guys,
Yureka Yunique and Yuphoria have same chipset as Coolpad Dazen 1 4g. So can we port their custom recoveries or custom rom into coolpad.??
Is there a tool or way to take full backup of Coolpad Dazen 1 4g like, boot.img, recovery.img, system.img, all radio related and other things??
Hi ,
i am trying to install ROM for coolpad dazen 1 i was selected wrong ROM ,so now my Mobil not working, not starting if u press any and at list it not recognize USB .if i connect USB it not identifying ,,plz any now to solution give me
thanks friends
modem soft bricked
Sir please help me..
I have tried volt modem of other phone. so my mobile modem was soft bricked then I tried non vote modem of yureka then my phone not detecting both sim cads sir please help me.... help me please ..please...
Shivakdl66 said:
Sir please help me..
I have tried volt modem of other phone. so my mobile modem was soft bricked then I tried non vote modem of yureka then my phone not detecting both sim cads sir please help me.... help me please ..please...
Click to expand...
Click to collapse
Same problem I faced ..
1 month ago ...
Solution :--
Flash the original stock ROM(1.1gb) with PC
RAGHAV RT said:
Same problem I faced ..
1 month ago ...
Solution :--
Flash the original stock ROM(1.1gb) with PC
Click to expand...
Click to collapse
Thanks I did it successfully.
Shivakdl66 said:
Thanks I did it successfully.
Click to expand...
Click to collapse
Ok bro
Solution
I have a solution of dead coolpad phones
I know phone is not detect in pc
So I made one boot disk to solve this its work 100%
And you phone will be revert back to its factory versions .
Solution 123 said:
I have a solution of dead coolpad phones
I know phone is not detect in pc
So I made one boot disk to solve this its work 100%
And you phone will be revert back to its factory versions .
Click to expand...
Click to collapse
If you really have solution then share it to others. It may help them to revive their android.
In my coolpad dazen 1 when I was try to flash new software it stop at 11%. What should I do? Plz help me. I tried both stock room software.
bricked my coolpad dazen 1
recently i was trying to remove root text from boot screen.my coolpad got bricked and when i try to start it runs in download mode only no recovery is loading.also the device is not flashing with ygdp tool.i have tried many methods but nothing is working plzzzzzzzzzzzzzzz................... help me.
got it working
devendra singh panwar said:
recently i was trying to remove root text from boot screen.my coolpad got bricked and when i try to start it runs in download mode only no recovery is loading.also the device is not flashing with ygdp tool.i have tried many methods but nothing is working plzzzzzzzzzzzzzzz................... help me.
Click to expand...
Click to collapse
i have managed to get my coolpad dazen 1 back to life.what i have done is flash different partition with fastboot.
if ur coolpad boots in download mode and secure phone is written and cant be flashed with ygdp tool.there this method is applicable.
like fastboot flash (partition) (file name) .for example "fastboot flash system system.img".if u r confused let me explain widely-
1.I have coolpad stock firmware in .cfb file.you can download it from internet.
2.I installed ygdp tool latest version.To copy data of firmware.you can copy it just load the .cfb file in ygdp tool.Do not flash with it just load the firmware in ygdp tool now when checking is done. go to your ygdp tool installation directory like "c:/ygdp".where ygdp tool is intalled. go to folder downfiles there u will find a folder named 8297l-100 copy it to another safe location.
3.now open partition.xml file in 8297l-100.there u will find partition name and file name.
4.go to ur adb or fastboot folder.
5.open a cmd window by "shift+right click".
6.now command fastboot devices.if ur phone is detected u can flash the partition manually.like fastboot flash (partition name) (file name).
7.partition name should be named correctly otherwise it will fail.
"Tools " u will need-
1. coolpad dazen 1 drivers for pc
2. adb drivers for coolpad dazen 1.
3. ygdp tool latest
thats all folks hope u will able to unbrick ur dazen 1
devendra singh panwar said:
recently i was trying to remove root text from boot screen.my coolpad got bricked and when i try to start it runs in download mode only no recovery is loading.also the device is not flashing with ygdp tool.i have tried many methods but nothing is working plzzzzzzzzzzzzzzz................... help me.
Click to expand...
Click to collapse
jackey31 said:
hello..
i was trying to root and install cwm.. and i unfortunately installed the wrong recovery now my phone does not start.. not even in recovery mode..
it shows a messege "Download and install package...........etc. press volume up to proceed down to cancel" pressing the keys don't do any thing phone gets off after a while.. i have a backup of stock recovery and boot but i think both files are same its 20mb both.. i had used Flashify to backup. and i can't even enter fastboot my pc does not detect my phone perhaps because i don't have the drivers... is it possible to fix my phone or its dead for ever..:crying::crying::crying::crying::crying::crying::silly::silly::crying:
i was following this method here.. www[dot]gizdev[dot]com/easy-way-to-root-coolpad-dazen-1/
Click to expand...
Click to collapse
bro go to this link-https://forum.xda-developers.com/android/help/coolpad-dazen-1-dead-plz-help-t3178510/page2#post71688300
dead
hey my coolpad dazen 1 is completly dead it does not show any mesage when connected to pc via data cable nd pressing vol up nd power button. how can i make this working
what happened to ur hanset before it gone dead pls explain
please help me this is between live and death. I bought a coolpad 8715 but the android version doesn't work with Playstore and everything about it is in Chinese, I try to change the language to English but the apps are still written in China. please how can I install another OS on it that support Playstore. I downloaded the firmware ( 8715_4.4.016.P1.8715.CPB ) which is in CPB format and i try to extract it to change application and some settings, after extraction I found some files but I don't know which one to edit or how to. The help I needed is that, how to edit my firmware .....CPB file after extraction and pack it back as .......CPB file so that I can use it to flash my coolpad 8715. Or is their any OS or ROM I can use like KitKat, lollipop, marshmallow miui etc. I try to update the phone with wireless hotspot, not working. I also try to install KitKat 4.4.2 Custom ROM through the phone recovery mode which is in China, but showing verification failed and signature error. please help me what can I do, am ready to take any ricks.
King smus said:
please help me this is between live and death. I bought a coolpad 8715 but the android version doesn't work with Playstore and everything about it is in Chinese, I try to change the language to English but the apps are still written in China. please how can I install another OS on it that support Playstore. I downloaded the firmware ( 8715_4.4.016.P1.8715.CPB ) which is in CPB format and i try to extract it to change application and some settings, after extraction I found some files but I don't know which one to edit or how to. The help I needed is that, how to edit my firmware .....CPB file after extraction and pack it back as .......CPB file so that I can use it to flash my coolpad 8715. Or is their any OS or ROM I can use like KitKat, lollipop, marshmallow miui etc. I try to update the phone with wireless hotspot, not working. I also try to install KitKat 4.4.2 Custom ROM through the phone recovery mode which is in China, but showing verification failed and signature error. please help me what can I do, am ready to take any ricks.
Click to expand...
Click to collapse
buddy pls tell us if
1. The phone is rooted.
2. The android version is factory or you installed it.
3. You are flashing the rom in stock recovery or other recovery.
When you bought it what was the android language?
If you are having trouble with flasing i advice you to use pc tools. Because in phone you will need to root the device first. If you well know the conditions of root. :good:
Hello , Guys
Since you all probably know, Lenovo A7020a48 has Android 6.0 Marshmallow which cannot be rooted because of the following :
1 - We got a locked bootloader, we can't flash or boot into custom recoveries and sadly at the moment I couldn't find a way to unlock it.
2 - We don't even have a custom recovery made for that model yet, I tried different version of TWRP for A7020a40 ~ A7020a46 models and they all crashed upon booting to them.
3 - Kingroot and similiar apps can't root Android 6.0.
So the only way to root your phone would be to downgrade it to Android 5.1 Lolipop which is easy.
Here is download links for the stock roms :
A7020a48_LL_S125_160419_ROW.rar.7z
A7020a48_S259_160721_ROW.7z
When you finish downloading please don't forget that we are going to use the SP Flash Tool provided in the rom as only that version "SP_Flash_Tool_5.1552.00" worked for me with no errors however with latest versions i got problems.
Obviously you are going to install the USB drivers and CDC drivers located at the "DRV_Tools" folder in the rom you downloaded.
after installing the drivers correctly turn off your phone, open SP flash tool, and choose the scatter file located at : "\SW\target_bin\MT6755_Android_scatter.txt" and then choose "Download Mode" then wait for it to finish checking the files, then click on the download button on the top left corner.
Then connect your device and wait for it to detect the device .
Wait until the flashing is complete Then After the green circle appears, simply disconnect your phone and boot into system normally.
Note: You might see a black box in the bottom left corner saying "efuse flash done or similar stuff" don't worry about it" it won't appear again however if you got an error saying "DL image failed" then you did something wrong repeat the previous steps again and make sure you choose everything correct especially your rom.
Now to the last part, finish the first time setup screens by skipping most of them and DO NOT UPDATE YOUR SYSTEM AT ALL
if you got a notification to update, simply ignore it or press cancel, and open google chrome, download king root and wait for it to simply root you phone.
Congratulations that's the first part for rooting your phone.
Now to Fixing Your IMEI
Simply Enable USB debugging in options and enable OEM unlocking.
Then power off your phone.
Download this tool : MauiMETA_v9.1635.23.rar
Yes Again it has to be that specific versions, with other versions i couldn't connect to my device however with this version i could.
Extract it to a random location on your pc and MauiMeta.exe and click on options and enable "enable composite kernel usb (adb)" then click on reconnect.
Now you have to connect your device with usb and turn it on, don't worry MauiMeta will change the boot to META mode automatically after it starts booting leave it as it's and wait for the tool to connect to your phone.
***After it connects simply choose IMEI download and a new window should appear, first click on upload from flash button then click yes to retrieve the modem file from your phone, then simply type your IMEI ( Please note that changing your IMEI is illegal however you should only use this method to fix your IMEI not change it ! , you have been warned)
Note : IMEI numbers should be 15 numbers however with MauiMeta you should only type the first 14 number as the 15th number is only a checksum number and will be added automatically.
After typing the IMEIs and checking them simply click on download to flash.
After it says "flashing is successful" then close the window and click Disconnect, and your phone should turn off automatically and you should start it up again.
*** Note : If you have a corrupted NVRAM file on your phone then you are lucky since that rom comes with the modem db file as well to fix NVRAM issues, simply click "Change NVRAM database file" then click No to choose the file, The file exists in the ROM package you downloaded earlier in the following location : "SW\modemdb\MDDB_InfoCustomApp....etc.EDB" and continue the rest of the steps normally.
Please Note that I won't provide support for this, I have only created this tutorial to save time for other people and I'm not expert yet to fix all the problem you may face however after following these steps i managed to root my device and even fix the invalid imei errors i got.
Also if you found errors in my thread or mistakes Please let me know so i can fix them.
Good luck and Don't hard brick your phone XD
I get this error in SP FLASH TOOL 5.1552.00- STATUS_SEC_PL_VFY_FAIL (-10*****)
Any idea ?
Error coming?
i got the same error in SP FLASH TOOL 5.1552.00- (BROM ERROR : STATUS_SEC_PL_VFY_FAIL (-1073610746))
nishkarshxda said:
i got the same error in SP FLASH TOOL 5.1552.00- (BROM ERROR : STATUS_SEC_PL_VFY_FAIL (-1073610746))
Click to expand...
Click to collapse
Use This Version Of Flash tool enable usb and storage checksum hit download ( Use different usb port better use backside of CPU )
Sp-flash-tool-V5-1548
10000% Working
mobile not getting switched on after downgrading
Hi, I tried to flash my Lenovo vibe K5 note (a7020a48 4 GB RAM). It was done without any error but I couldn't switch on my mobile nor it was detected in my computer. Please help me
Bro i download and flashed successfully but phone cant turn on but i flashed again marshmallow phone will turn on...Why lollipop cant boot... Second link for rom is lollipop or not
Any proof?
Bro where did you get these two rooms from? Tell us the source. Otherwise, how will we know?
after flash mobile no on anybody can u help me to how to flash 5.0 in lenovo k5 note
It worked great thanks .......though minor glitches may occur such as not playing any sound and not supporting JIO sim card. These can be fixed by System Updating your phone to the latest version preferably through a sound wifi connection.
Dear Friends.
I need Need Kodak Ektra Stock Rom help pls.
Does that mean you rooted Kodak ektra phone? If yes, please share the method. As I also want to root my phone.
Thanks
I have tried searching for a custom ROM for the ektra which is impossible to find. If there is any please post ?
I do wonder if there is a way of updating the os. As there is nothing listed in the compatible devices for lineageos, I wonder whether this is in plan or can be done
Metufe said:
Dear Friends.
I need Need Kodak Ektra Stock Rom help pls.
Click to expand...
Click to collapse
help pls. backup rom from device.
Did you got stock rom
Metufe said:
Dear Friends.
I need Need Kodak Ektra Stock Rom help pls.
Click to expand...
Click to collapse
Did you managed to get that stock ROM. I have bricked my phone i also need that very badly.
Please reply if got anything. I need atleast system.img file to fix this...
Thanks in advance.
Hi guys. I don't know if you solved this problem, but in case you don't yet, I tell you that I bought a Kodak Smartway X1 and I was looking for a stock Rom too, so I went to kodaksmart.com and send an email to the support group. They gave me a download link of the Rom. I don't know if you still look for the rom file, but if it is so, there you have an alternative. Greetings.
Guy89 said:
Hi guys. I don't know if you solved this problem, but in case you don't yet, I tell you that I bought a Kodak Smartway X1 and I was looking for a stock Rom too, so I went to kodaksmart.com and send an email to the support group. They gave me a download link of the Rom. I don't know if you still look for the rom file, but if it is so, there you have an alternative. Greetings.
Click to expand...
Click to collapse
I tried contacting the support online but they clearly denied for the ROM as it is not in their policy.
Request you to please help me in getting that ROM as my phone is completely dead.. :crying:
[email protected] said:
I tried contacting the support online but they clearly denied for the ROM as it is not in their policy.
Request you to please help me in getting that ROM as my phone is completely dead.. :crying:
Click to expand...
Click to collapse
People of Kodak support answer me. They want more information about the phone. Tell me the exact model of your device so I can give it to them.
Guy89 said:
People of Kodak support answer me. They want more information about the phone. Tell me the exact model of your device so I can give it to them.
Click to expand...
Click to collapse
My phone model is "kodak ektra"
[email protected] said:
My phone model is "kodak ektra"
Click to expand...
Click to collapse
Just like that... Ok.
Did you got the ROM ??
[email protected] said:
My phone model is "kodak ektra"
Click to expand...
Click to collapse
Did you asked from them regarding stock ROM??
I am still waiting for stock ROM as I need that because my phone is completely dead for long time.
Please someone post the stock ROM..
Hello!
Yesterday I received a KODAK Ektra smartphone from my friend. He had a problem - the Anti-Theft protection suddenly turned on. And he did not have the opportunity to unlock the smartphone.
Reset is not possible - Chinese characters are displayed in the recovery menu.
So I had to find the whole smartphone recovery kit.
1. Firmware
2. SP Flash Tool
3. Drivers for firmware mode (via SP FT) as well as CDC driver
Normal flashing is ok, but it does not erase the Anti-Theft lock.
Therefore, I had to do firmware with the option Format All + Firmware (only fot Anti-Theft unlock!!!)
But at the same time, the IMEI code was deleted.
For the IMEI recovery, I used the ModemMETA utility and installing (before using the modemMETA) CDC drivers.
From the link you can find all the utilities that helped me restore the device.
You can avoid problems with the recovery of IMEI if you need regular firmware (without formatting). Or you need to save NVRAM before flashing (it is recommended anyway).
So, for flashing you need:
1. Drivers (for Win 8.1 and 10 you also need to turn off driver signature verification)
2. SP Flash Tool (mode "Download only" or "firmware")
3. Firmware with Scatter file.
Any way save NVRAM (!!!!)
Disconnect Ektra from PC, turn off the phone. Run program, select scatter file, select "Download only" (or Firmware), click Download button, connect phone to PC. Wait. When a small green square with a checkmark appears, disconnect the smartphone from the computer and turn it on. Wait a few minutes for it to turn on (the first launch lasts longer than usual)
If you need to erase Anti-Theft - use mode "Format All+Firmware", flash it according to the instructions above. You don't need using this mode, if you don't have Security Lock on your smartphone!! You don't need to recover the IMEI when IMEI is OK (if *#06# shows IMEI).
You will have smartphone with emty IMEI. Recover IMEI from NVRAM,
OR you can install CDC drivers and use ModemMETA, DB-file MDDB_InfoCustomAppSrcP......EDB and IMEI number you know to recover IMEI.
https://mega.nz/#!J1c0xIKb!V6pZ2yxBVGagv6sqOVEPuavm-P6f_UrmCo3z6C-bpaE
Thank you XuMEPA for sharing all the files
But I am getting "status download exception" error and it happens at system.img file mostly rest all other files are flashed successfully.
Request you to please share the resolution for the same and please ping me on whatsapp or share your whatsapp no. for discussion if you don't mind please.
Thanks and regards,
Gaurang Sharma
+91 8410414294 (whatsapp)
Thank you, honestly, thank you
XuMEPA said:
Hello!
Yesterday I received a KODAK Ektra smartphone from my friend. He had a problem - the Anti-Theft protection suddenly turned on. And he did not have the opportunity to unlock the smartphone.
Reset is not possible - Chinese characters are displayed in the recovery menu.
So I had to find the whole smartphone recovery kit.
1. Firmware
2. SP Flash Tool
3. Drivers for firmware mode (via SP FT) as well as CDC driver
Normal flashing is ok, but it does not erase the Anti-Theft lock.
Therefore, I had to do firmware with the option Format All + Firmware (only fot Anti-Theft unlock!!!)
But at the same time, the IMEI code was deleted.
For the IMEI recovery, I used the ModemMETA utility and installing (before using the modemMETA) CDC drivers.
From the link you can find all the utilities that helped me restore the device.
You can avoid problems with the recovery of IMEI if you need regular firmware (without formatting). Or you need to save NVRAM before flashing (it is recommended anyway).
So, for flashing you need:
1. Drivers (for Win 8.1 and 10 you also need to turn off driver signature verification)
2. SP Flash Tool (mode "Download only" or "firmware")
3. Firmware with Scatter file.
Any way save NVRAM (!!!!)
Disconnect Ektra from PC, turn off the phone. Run program, select scatter file, select "Download only" (or Firmware), click Download button, connect phone to PC. Wait. When a small green square with a checkmark appears, disconnect the smartphone from the computer and turn it on. Wait a few minutes for it to turn on (the first launch lasts longer than usual)
If you need to erase Anti-Theft - use mode "Format All+Firmware", flash it according to the instructions above. You don't need using this mode, if you don't have Security Lock on your smartphone!! You don't need to recover the IMEI when IMEI is OK (if *#06# shows IMEI).
You will have smartphone with emty IMEI. Recover IMEI from NVRAM,
OR you can install CDC drivers and use ModemMETA, DB-file MDDB_InfoCustomAppSrcP......EDB and IMEI number you know to recover IMEI.
https://mega.nz/#!J1c0xIKb!V6pZ2yxBVGagv6sqOVEPuavm-P6f_UrmCo3z6C-bpaE
Click to expand...
Click to collapse
I followed your instructions down to every letter along with learning in general about how to use the SPTool and take NVRAM backup.
My problem - locked out of my phone. Factory reset. Unable to sign in as google locked me out.
Solution - Your Firmware+Download option + NVRAM restoring for IMEI. My phone works perfectly like new.
Thank you so much, thank you
ninjanmizuki said:
I followed your instructions down to every letter along with learning in general about how to use the SPTool and take NVRAM backup.
Solution - Your Firmware+Download option + NVRAM restoring for IMEI. My phone works perfectly like new.
Click to expand...
Click to collapse
How to backup and restore NVRAM on Kodak Ektra as it is non-rooted phone?
Hi, I'm new to the forums.
Back to July 2020, I tried to install custom ROM for my Redmi Cactus and it has no problem until I wipe the data from TWRP and install the custom ROM but failed, I couldn't remember why. And now the phone is dead, it won't boot, no vibration what so ever, when I charge it the LED turns on but when I plug it to PC it won't detect the phone, no sound and nothing in Device Manager even though I have the MTK driver installed on my PC. I've read this thread and couldn't understand the first step as it says "Open REV4 Bypass tool, off your phone. Click BYPASS Connect phone to PC and Turn ON your phone." but I can't turn on my phone. Also on Step 2 which is the SP Flash Tool thing, it says "Open SPFLASHTOOL choose in Download-Agent No_Auth.bin" but on my SP Flash Tool archive I can't find No_Auth.bin, is it somewhere from third-party or from the firmware itself? Currently I'm downloading the firmware and will try to flash it using SP Flash Tool to see if it works. Any help with this?
Best Regards,
Rev.
bioib said:
Hi, I'm new to the forums.
Back to July 2020, I tried to install custom ROM for my Redmi Cactus and it has no problem until I wipe the data from TWRP and install the custom ROM but failed, I couldn't remember why. And now the phone is dead, it won't boot, no vibration what so ever, when I charge it the LED turns on but when I plug it to PC it won't detect the phone, no sound and nothing in Device Manager even though I have the MTK driver installed on my PC. I've read this thread and couldn't understand the first step as it says "Open REV4 Bypass tool, off your phone. Click BYPASS Connect phone to PC and Turn ON your phone." but I can't turn on my phone. Also on Step 2 which is the SP Flash Tool thing, it says "Open SPFLASHTOOL choose in Download-Agent No_Auth.bin" but on my SP Flash Tool archive I can't find No_Auth.bin, is it somewhere from third-party or from the firmware itself? Currently I'm downloading the firmware and will try to flash it using SP Flash Tool to see if it works. Any help with this?
Best Regards,
Rev.
Click to expand...
Click to collapse
Follow this https://www.droidwin.com/unbrick-realme-6-6i-6s-sp-flash-tool/, of course, skip to download and flash the files that are for the other model, instead, replace from your phone's files.
The whole idea, is that you have to install the LibUSB drivers, so your device get recognized and can bypass the DA/SLAA restrictions for BROM mode, in MediaTek devices. When you can bypass it, then you can flash the proper firmware for your device, you don't need to power on your device for that, as your device is bricked...
Hi, sorry it took me so long to reply, the phone is finally fixed thanks to your guide! How can I make this thread or your post as a solution?
bioib said:
Hi, sorry it took me so long to reply, the phone is finally fixed thanks to your guide! How can I make this thread or your post as a solution?
Click to expand...
Click to collapse
Good to know that. Feel free to post any you consider useful for any user.
if you want to mark this thread, you should edit the tittle, in the thread, adding the word (Solved)